Documente Academic
Documente Profesional
Documente Cultură
ProRox ®
Product Catalogue
South East Asia
Technical Insulation Technical Insulation
ROCKWOOL Technical Insulation – a Excellent insulation products, The best solutions, built on solid The ROCKWOOL Group ROCKWOOL products has a Stone wool protects people and
subsidiary of the ROCKWOOL Group outstanding people. expertise ROCKWOOL Technical Insulation is a melting point above 1000°C the environment
– develops innovative technical All ROCKWOOL Technical Insulation Our people’s in-depth expertise is the best subsidiary of the ROCKWOOL Group, the ROCKWOOL products withstand ROCKWOOL products offer effective
insulation solutions for the process solutions meet the most stringent quality guarantee that end users in the world’s largest and most experienced temperatures up to 1000°C, making them protection and optimal performance
industry and the shipbuilding & offshore and safety standards. All ProRox and petrochemicals, power generation, producer of stone wool products. exceptionally resistant to fire. This for the entire life cycle of the installation.
market. Through our comprehensive of SeaRox products and constructions have shipbuilding, offshore and the process ROCKWOOL International A/S is based in resistance can slow a fire’s progress and buy According to independent research
product lines ProRox and SeaRox we offer been tested according to the latest industries are given the best and most Hedehusene, Denmark. In 2016 the Group precious time for rescue operations while ROCKWOOL is one of the most durable
a full spread of sustainable products and regulations and approved by all major advanced insulation solution. Both in the generated net sales of EUR 2,202 million. helping to protect the building’s structure products available with an unequalled
system guaranteeing the highest possible classification societies. As an innovation- process industry and in the marine & The Group’s operations have a large from unnecessary damage. Yet while heat combination in the field of environmental
thermal and firesafe insulation of all driven company we demand excellence. In offshore industry, our stone wool products presence in Europe and also facilities in and flames are bad enough in a fire, smoke improvement, energy savings, CO2
technical installations. every segment we keep searching for new offer the highest possible protection Russia, North America, India and East Asia is the serious danger. It can suffocate reduction, acoustic insulation and fire safety.
systems, methods and solutions. We against heat and energy loss, fire, noise and with more than 11,000 employees in more occupants, and it can incapacitate people A positive ‘carbon footprint’: During its
Our over 80 years of experience are endeavour to develop ever more efficient other unwanted influences. Our experts will than 38 countries. who might otherwise have been able to entire life cycle, ROCKWOOL insulation will
reflected in a complete set of high-grade products and to constantly optimise be delighted to share their knowledge and escape. ROCKWOOL insulation keeps toxic save more than 20,000 times the carbon
products and expert advice. Today, our production processes and processing advise you in drawing up technical and smoke from insulation to a minimum for emissions caused by its production. The fire
dedicated and technically experienced technologies. And we deliver! Our people project specifications. even greater safety for the occupants retardant and fire insulating characteristics
people remain fully committed to provide know your market down to the smallest during fire accident. of our stone wool products deliver superior
the very best service and tools in the detail and provide continual knowledge Up-to-date information and protection to people, property and the
market and a total range of cutting-edge and service for the benefit of the client. expert tools. environment.
insulation solutions. Besides excellent insulation products, they As a highly skilled professional you are
are the real key to our success. Thanks to always looking for the best possible end
their expertise and extensive experience, result. The quickest way to achieve that is
we can offer you exceptional stone wool with ROCKWOOL Technical Insulation Technical insulation
solutions, expert tools and an impeccable premium products, and the detailed shaped by experts.
service information and expert tools that come
with them, which always incorporate the
latest technical findings. That’s why you
should always check that the information
Founding Partner of EIIF and tools you have are up-to-date. If you
ROCKWOOL Technical Insulation was one of the have any questions about specific
founding partners of the European Industrial application issues, working methods or
Insulation Foundation (EIIF), which has established European Industrial
product properties, please visit our website
Insulation Foundation at www.rockwoolasia.com or contact one of
itself as a resource for industries that need to
Founding Partner
reduce CO2 emissions. our local sales organisations (see the
contact details on the back of this brochure).
10 25
Pipe section Heavy duty slab
12 26
Heavy duty pipe section Compression resistant slab
14 29 Project
Tanjung Bin Coal-Fired
Power Plant Project in
Malaysia
Wired mat Blanket
16 32
Materials
Pipe section
Wired mats
Slabs
20 33
Semi rigid slab Granulate wool
21 34
Rigid slab Delivery and storage
ProRox Product Catalogue ProRox Product Catalogue
4 5
Technical Insulation Technical Insulation
New product names, logical structure ProRox NEW GRADE OLD EQUIVALENT GRADE
Each product name is structured in the same clear way: Industrial insulation ProRox PS 960SA RockTech SPI 120 10
ProRox PS 970 SA
RockTech SPI 150 12
In the view of our rebranding strategy
e.g.: P r o R o x W M 9 7 0 A L U SA we have adapted and clarified the ProRox WM 950 SA
14
entire range of ROCKWOOL Technical
ProRox WM 960SA RockTech WM650 16
Product range Insulation products. From now on, all
our insulation solutions for technical ProRox WM 970SA RockTech WM650HD 18
2 last digits = other product characteristics
installations in the process industry will ProRox SL 930SA 20
Product identifier Application code be part of the ProRox range. The main
ProRox SL 950SA 21
characteristic of these products is their
WM = Wired Mats 1st digit: 3 = acoustics, 5 = compression, ProRox SL 960SA RockTech S650 22
high thermal insulation capacity. Next
SL = Slabs 9 = thermal insulation to this, they of course also comply with ProRox SL 970SA RockTech S650.128 23
PS = Pipe Sections the most stringent requirements on fire
ProRox SL 978SA RockTech S850 24
resistance and acoustic insulation.
BL = Blanket Product variants
Beside you will get an overview of the ProRox SL 980 25
ALU = reinforced aluminium
ProRox range and its new names. ProRox SL 540 SA
RockTech S650.160.HC 26
ProRox BL 938 SA
RockTech B350 29
ProRox BL 958 SA
RockTech B450 30
ProRox BL 960 SA
RockTech B650 31
ProRox LF 970 32
ProRox GR 903 33
Industrial insulation
Application selector
Thermal insulation Thermal insulation
ProRox WM 970 SA
RockTech WM650HD 128kg/m³
ProRox SL 960SA
RockTech S650 100kg/m³
ProRox SL 970SA
RockTech S650.128 128kg/m³
ProRox SL 540SA
RockTech S650.160.HC 160kg/m³
ProRox BL 960 SA
RockTech B650 100kg/m³
ProRox LF 970
Loose Wool
ProRox GR 903
Remarks
Due to an almost limitless range of applications, we have not BS 5970 (Code of practice for the thermal insulation of
provided detail information for all the applications. Information pipework, ductwork, associated equipment and other
is available in the following manuals/standards for industrial industrial installations)
insulation:
CINI manual ‘Insulation for industries’ For specific applications, our ROCKWOOL Technical Insulation
AGI Q101 (Insulation work on power plant components) sales team will be pleased to advise you.
DIN 4140 (Insulation work on industrial installations and
building equipment)
Applications angle of at least 30 degrees to each other. guide, the following intermediate distances
Dimensions Length: 1200 mm
ProRox PS 960SA is a pre-formed stone wool The shell is secured with galvanised binding can be used:
Internal diameter pipe insulation pipe section. The sections are supplied split wire (thickness 0.5mm, at least 3/m). For Horizontal pipe work: 3 to 4m
Nominal pipe size (NPS) inches
(ASTM C585-10) mm and hinged for easy snap-on assembly, and insulation thickness above 100mm (or Vertical pipe work: 5 to 6m
are suitable for the thermal and acoustic temperatures > 250°C) the insulation
½ 22
insulation of the industrial pipe work. should be applied in at least two layers. In Finishing
¾ 27 the case of multi-layer insulation it is All pipe sections should be finished with a
1 34 Compliance recommended that the lengthwise and metal (e.g. aluminium) cladding. Where
1¼ 43 ProRox PS 960SA Pipe Sections comply with crosswise joints are staggered necessary, expansion joints are required to
the requirements as set by internationally (‘masonry bond’). cater for expansion of the pipes. Both the
1½ 49
regonized CINI 2.2.03, ASTM C547 Grade lengthwise and circular joints are fastened
2 61 A type I, II, IV. Support construction with sheet-metal screws: hard aluminium or
2½ 74 On pipes where mechanical loading stainless steel 1/2”, 8 per metre. Close
Installation guidelines (e.g. strong vibrations) of the insulation expansion joints with a steel tensioning
3 90
Assembly is expected and/or the temperature is wire. Connections to mountings, head and
3½ 102 Fit the ProRox PS 960SA closely around the higher than 300°C, a support structure end caps etc. should be made watertight
4 115 pipe, with the lengthwise (horizontal) joint (spacers) should be constructed. The using an appropriate sealant.
turned towards the underside. The number of spacers depends on the
4 ½ (Only available in Rayong factory) 128
lengthwise joints must be staggered at an temperature and the mechanical load. As a
5 143
6 170
Note Advantages
7 196
All steel components exposed to a Excellent fit provides optimal performance
8 221
corrosive environment should be Easy to handle and to install
9 246 cleaned, degreased and coated with a Wide range of diameters and insulation thicknesses
10 275 protective finish. Suitable for use over stainless steel
11 300 For temperatures up to 350°C, a support construction is not generally necessary
12 326
Product properties
14 358
16 408.8 Performance Standard
18 459.6 Mean Temp (°C) 50 100 150 200 250 300 350
Thermal Conductivity ASTM C335
20 510.4 λ (W/mK) 0.037 0.042 0.048 0.055 0.063 0.072 0.083
22 561.2
Nominal Density 120 kg/m³ ASTM C302
24 612
Maximum Service ASTM C411/
26 662.8 650°C
Temperature C447
28 713.6 EuroClass A1
EN 13501-1
Reaction to Fire Surface burning characteristics;
30 (Only available in Bukit Raja factory) 764.4 ASTM E84
Flame spread = passed, Smoke development = passed
32 (Only available in Bukit Raja factory) 815.2
Less than 10 ppm ASTM C871
Chloride Content Conforms to the stainless steel corrosion specification ASTM C692/
as per ASTM C795 C871
ASTM C1104/
Moisture Absorption Less than 1% weight
C1104M
Note: All information and data for technical parameters are based on laboratory testing.
Applications turned towards the underside. The temperature and the mechanical load. As a
Dimensions Length: 1200 mm
ProRox PS 970SA is a pre-formed high lengthwise joints must be staggered at an guide, the following intermediate distances
Internal diameter pipe insulation density stone wool pipe section. The angle of at least 30 degrees to each other. can be used:
Nominal pipe size (NPS) inches
(ASTM C585-10) mm sections are supplied split and hinged for The shell is secured with galvanised binding Horizontal pipe work: 3 to 4m
easy snap-on assembly, and are specially wire (thickness 0.5mm, at least 3/m). For Vertical pipe work: 5 to 6m
½ 22
suitable for the thermal and acoustic insulation thickness above 100mm (or
¾ 27 insulation of industrial pipe work which is temperatures > 250°C) the insulation Finishing
1 34 exposed to high temperature and light (e.g. should be applied in at least two layers. In All pipe sections should be finished with a
vibrations) mechanical loads. the case of multi-layer insulation it is metal (e.g. aluminium) cladding. Where
1¼ 43
recommended that the lengthwise and necessary, expansion joints are required to
1½ 49 Compliance crosswise joints are staggered cater for expansion of the pipes. Both the
2 61 ProRox PS 970SA Pipe Sections comply with (‘masonry bond’). lengthwise and circular joints are fastened
the requirements as set by internationally with sheet-metal screws: hard aluminium or
2½ 74
regonized CINI 2.2.03, ASTM C547 Grade Support construction stainless steel 1/2”, 8 per metre. Close
3 90 A type I, II, IV. On pipes where mechanical loading expansion joints with a steel tensioning
3½ 102 (e.g. strong vibrations) of the insulation wire. Connections to mountings, head and
Installation guidelines is expected and/or the temperature is end caps etc. should be made watertight
4 115
Assembly higher than 300°C, a support structure using an appropriate sealant.
4 ½ (Only available in Rayong factory) 128 Fit the ProRox PS 970SA closely around the (spacers) should be constructed. The
5 143 pipe, with the lengthwise (horizontal) joint number of spacers depends on the
6 170
7 196 Note Advantages
8 221 All steel components exposed to a Suitable for heavy duty applications which are exposed to high temperatures and
corrosive environment should be high mechanical loads
9 246
cleaned, degreased and coated with a Excellent fit provides optimal performance
10 275
protective finish. Easy to handle and to install
11 300 Wide range of diameters and insulation thicknesses
12 326 Suitable for use over stainless steel
For temperatures up to 350°C, a support construction is not generally necessary
14 358
16 408.8 Product properties
18 459.6
Performance Standard
20 510.4
Mean Temp (°C) 50 100 150 200 250 300 350
22 561.2 Thermal Conductivity ASTM C335
λ (W/mK) 0.038 0.043 0.048 0.055 0.063 0.072 0.082
24 612
26 662.8 Nominal Density 150 kg/m³ ASTM C302
Note: All information and data for technical parameters are based on laboratory testing.
50 5000 5000
40 5000 5000
50 5000 5000
Product properties
60 4000 4000
Performance Standard
70 2500 3000
75 2500 3000 Mean Temp (°C) 50 100 150 200 250 300
Thermal Conductivity ASTM C177
λ (W/mK) 0.037 0.042 0.048 0.056 0.065 0.073
80 2500 2000
Applications > 400°C should preferably be insulated Linear Shrinkage Less than 2% (at max service temperature) ASTM C356
ProRox WM 960SA is a lightly bonded heavy with ProRox WM 960SA, in which both the
EuroClass A1
stone wool mat stitched on galvanised mesh and the stitching wire is in stainless EN 13501-1
Reaction to Fire Surface burning characteristics;
wired mesh with galvanised wire. The wired steel. If the mats are assembled in multiple ASTM E84
Flame spread = passed, Smoke development = passed
mat is especially suitable for industrial layers, both the lengthwise and circular
installations such as high-pressure steam joints must be staggered (‘masonry bond’). Less than 10 ppm ASTM C871
Chloride Content Conforms to the stainless steel corrosion specification ASTM C692/
pipes, reactors, furnaces, etc. where high as per ASTM C795 C871
demands are made on the temperature Support construction
ASTM C1104/
resistance of the insulation. Given the limited pressure resistance of Moisture Absorption Less than 1% weight
C1104M
wired mats, in most cases a support is
Compliance required for the board cladding. As a Water Absorption Less than 1 kg/m² EN 1609
ProRox WM 960SA Wired Mats comply with guideline, assume that a support is required
the requirements as set by the every 3 to 4 metres.
Note: All information and data for technical parameters are based on laboratory testing.
internationally recognized standards like
CINI 2.2.02 and ASTM C592 Type I, II and III. Finishing
The insulation should be finished with a
Installation guidelines metal (e.g. aluminium) cladding. Where
Assembly necessary, expansion joints are provided to
Cut the wired mat to length, so that the cater for expansion of the pipes. Both the
mat fits the pipe with slight pre-stressing. lengthwise and circular joints are fastened
The closing joints must be staggered at an with sheet-metal screws: hard aluminium or
angle of at least 30 degrees to each other. stainless steel 1/2”, 8/metre. Close the
The closing joints of the mats (lengthwise expansion joints with a steel tensioning
and circular joints) must be wired together wire. Connections to mountings, head and
using e.g. steel wire (min. 0.5 mm) or end caps, etc. should be made watertight
secured with mat hooks. Stainless steel using a suitable sealant.
pipes and pipes with a temperature of
40 5000 5000
50 5000 5000
Product properties
60 4000 4000
Performance Standard
70 2500 3000
75 2500 3000 Mean Temp (°C) 50 100 150 200 250 300
Thermal Conductivity ASTM C177
λ (W/mK) 0.038 0.043 0.050 0.057 0.066 0.076
80 2500 2000
Nominal Density 128 kg/m³ ASTM C167
Applications with ProRox WM 970SA, in which both the Maximum Service ASTM C411/
750°C
Temperature C447
ProRox WM 970SA is a lightly bonded heavy mesh and the stitching wire is in stainless
stone wool mat stitched on galvanised wired steel. If the mats are assembled in multiple
Linear Shrinkage Less than 2% (at max service temperature) ASTM C356
mesh with galvanised wire. The wired mat is layers, both the lengthwise and circular
especially suitable for industrial installations joints must be staggered (‘masonry bond’).
EuroClass A1
where high temperature and vibration EN 13501-1
Reaction to Fire Surface burning characteristics;
resistance is required. Support construction ASTM E84
Flame spread = passed, Smoke development = passed
Given the limited pressure resistance of
Less than 10 ppm ASTM C871
Compliance wired mats, in most cases a support is
Chloride Content Conforms to the stainless steel corrosion specification ASTM C692/
ProRox WM 970SA Wired Mats comply with required for the board cladding. As a as per ASTM C795 C871
the requirements as set by the guideline, assume that a support is required
ASTM C1104/
internationally recognized standards like every 3 to 4 metres. Moisture Absorption Less than 1% weight
C1104M
CINI 2.2.02 and ASTM C592 Type I, II and III.
Finishing Water Absorption Less than 1 kg/m² EN 1609
Installation guidelines The insulation should be finished with a
Assembly metal (e.g. aluminium) cladding. Where
Note: All information and data for technical parameters are based on laboratory testing.
Cut the wired mat to length, so that the necessary, expansion joints are provided to
mat fits the pipe with slight pre-stressing. cater for expansion of the pipes. Both the
The closing joints must be staggered at an lengthwise and circular joints are fastened
angle of at least 30 degrees to each other. with sheet-metal screws: hard aluminium or
The closing joints of the mats (lengthwise stainless steel 1/2”, 8/metre. Close the
and circular joints) must be wired together expansion joints with a steel tensioning
using e.g. steel wire (min. 0.5 mm) or wire. Connections to mountings, head and
secured with mat hooks. Stainless steel end caps, etc. should be made watertight
pipes and pipes with a temperature of using a suitable sealant.
> 400°C should preferably be insulated
Mean Temp (°C) 50 100 150 200 250 Linear Shrinkage Less than 2% (at max service temperature) ASTM C356
Thermal Conductivity ASTM C177
λ (W/mK) 0.039 0.047 0.054 0.064 0.075 EuroClass A1
EN 13501-1
Reaction to Fire Surface burning characteristics;
ASTM E84
Nominal Density 60 kg/m³ ASTM C303 Flame spread = passed, Smoke development = passed
Less than 10 ppm ASTM C871
Maximum Service Chloride Content Conforms to the stainless steel corrosion specification ASTM C692/
450°C ASTM C411/C447
Temperature as per ASTM C795 C871
ASTM C1104/
Linear Shrinkage Less than 2% (at max service temperature) ASTM C356 Moisture Absorption Less than 1% weight
C1104M
Note: All information and data for technical parameters are based on laboratory testing.
Advantages Advantages
Excellent thermal and acoustic insulation Suitable for high temperature application
Resistant to high temperatures Retains shape
Available in a wide range of thicknesses
Product properties
Product properties
Performance Standard
Performance Standard
Mean Temp (°C) 50 100 150 200 250 300
Thermal Conductivity ASTM C177
λ (W/mK) 0.038 0.044 0.050 0.057 0.065 0.075 Mean Temp (°C) 50 100 150 200 250 300
Thermal Conductivity ASTM C177
λ (W/mK) 0.038 0.043 0.049 0.056 0.064 0.074
Nominal Density 100 kg/m³ ASTM C303
Nominal Density 128 kg/m³ ASTM C303
Maximum Service ASTM C411/
650°C
Temperature C447 Maximum Service ASTM C411/
650°C
Temperature C447
Linear Shrinkage Less than 2% (at max service temperature) ASTM C356
Linear Shrinkage Less than 2% (at max service temperature) ASTM C356
EuroClass A1
EN 13501-1
Reaction to Fire Surface burning characteristics; EuroClass A1
ASTM E84 EN 13501-1
Flame spread = passed, Smoke development = passed Reaction to Fire Surface burning characteristics;
ASTM E84
Less than 10 ppm ASTM C871 Flame spread = passed, Smoke development = passed
Chloride Content Conforms to the stainless steel corrosion specification ASTM C692/ Less than 10 ppm ASTM C871
as per ASTM C795 C871 Chloride Content Conforms to the stainless steel corrosion specification ASTM C692/
ASTM C1104/ as per ASTM C795 C871
Moisture Absorption Less than 1% weight
C1104M ASTM C1104/
Moisture Absorption Less than 1% weight
C1104M
Water Absorption Less than 1 kg/m² EN 1609
Water Absorption Less than 1 kg/m² EN 1609
Note: All information and data for technical parameters are based on laboratory testing.
Note: All information and data for technical parameters are based on laboratory testing.
ProRox SL 978SA High temperature slab ProRox SL 980 Heavy duty slab
Old Equivalent Grade: RockTech S850
Advantages Advantages
Suitable for heavy duty application which are exposed to high temperatures and Suitable for heavy duty application which are exposed to high temperatures and
high mechanical loads high mechanical loads
Retains shape Retains shape
Available in a wide range of thicknesses Available in a wide range of thicknesses
ProRox SL 540SA Compression resistant slab ProRox SL 560 Compression resistant slab
Old Equivalent Grade: RockTech S650.160.HC Old Equivalent Grade: ROCKWOOL 251
Advantages Advantages
Excellent thermal and acoustic insulation Excellent thermal and acoustic insulation
Resistant to high temperatures Resistant to high temperatures
Resistant to mechanical loads Resistant to mechanical loads
Note: All information and data for technical parameters are based on laboratory testing. Water Absorption Less than 1 kg/m2 EN 1609
Note: All information and data for technical parameters are based on laboratory testing.
Dimensions
Compressive Strength Up to 50kPa (At 10% deformation) EN 826 Moisture Absorption Less than 1% weight ASTM C1104/C1104M
Note: All information and data for technical parameters are based on laboratory testing.
Dimensions Dimensions
Standard Width: 600 mm Standard Length (mm) Density: 100 kg/m3 Standard Length (mm)
Thickness(mm) Malaysia Factory Thailand Factory Thickness(mm) Malaysia Factory(Bukit Raja) Thailand Factory(Rayong)
Advantages Advantages
Suitable up to intermediate temperature Resistant to high temperatures
Ease of use Ease of use
Flexible application Flexible application
Mean Temp (°C) 50 100 150 200 250 Mean Temp (°C) 50 100 150 200 250 300
Thermal Conductivity ASTM C177 Thermal Conductivity ASTM C177
λ (W/mK) 0.039 0.046 0.054 0.064 0.075 λ (W/mK) 0.041 0.049 0.057 0.066 0.074 0.083
Nominal Density 80 kg/m³ ASTM C167 Nominal Density 100 kg/m³ ASTM C167
Linear Shrinkage Less than 2% (at max service temperature) ASTM C356 Linear Shrinkage Less than 2% (at max service temperature) ASTM C356
EuroClass A1 EuroClass A1
EN 13501-1 EN 13501-1
Reaction to Fire Surface burning characteristics; Reaction to Fire Surface burning characteristics;
ASTM E84 ASTM E84
Flame spread = passed, Smoke development = passed Flame spread = passed, Smoke development = passed
Less than 10 ppm Less than 10 ppm ASTM C871
ASTM C871
Chloride Content Conforms to the stainless steel corrosion specification Chloride Content Conforms to the stainless steel corrosion specification ASTM C692/
ASTM C692/C871
as per ASTM C795 as per ASTM C795 C871
ASTM C1104/ ASTM C1104/
Moisture Absorption Less than 1% weight Moisture Absorption Less than 1% weight
C1104M C1104M
Water Absorption Less than 1 kg/m² EN 1609 Water Absorption Less than 1 kg/m² EN 1609
Note: All information and data for technical parameters are based on laboratory testing. Note: All information and data for technical parameters are based on laboratory testing.
Applications Applications
ProRox LF 970 ROCKWOOL Loose Fill is Advantages ProRox GR 903 is a stone wool granulate Advantages
lightly bonded impregnated stone wool. Ease of use with no additives. The granulate is especially Complies with the most stringent
This product is especially suitable for Flexible application suitable for the thermal insulation of cold requirements for the insulation of
thermal insulation and acoustic insulation of boxes and air separation plants. cold boxes
joints and irregularly formed constructions. Chemically inert to steel
Installation guidelines
Easy to remove for inspection
The guidelines for the use of granulate
purposes
wool in cold applications are given in the
AGI Q 118 standard. These guidelines
Product properties are available on request. Please ask your
ROCKWOOL Technical Insulation sales
Performance Standard
consultant.
Mean Temp (°C) 50 100 150 200 250 300
Thermal Conductivity EN 12667
λ (W/mK) 0.040 0.049 0.057 0.067 0.075 0.091
Water Vapour
µ=1 EN 12086
Diffusion Resistance Note: All information and data for technical parameters are based on laboratory testing.
Note: All information and data for technical parameters are based on laboratory testing.
www.rockwoolasia.com