Documente Academic
Documente Profesional
Documente Cultură
TL Series ..................................................................................................................................................................... 18
Frequency Allocation System ................................................................................................................................ 18
Configurations ....................................................................................................................................................... 18
Configurations supported are: .............................................................................................................................. 18
Space Diversity with SD Combiner ........................................................................................................................ 19
Space Diversity with two antennas ....................................................................................................................... 19
CCDP (Co-Channel Dual-Polarized) Operation ...................................................................................................... 19
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 2 of 31
Data subject to change without notice.
Physical Dimensions .............................................................................................................................................. 27
Weight ................................................................................................................................................................... 27
Power supply ......................................................................................................................................................... 27
Power Consumption (W) ....................................................................................................................................... 28
Environmental conditions (in use conditions) ....................................................................................................... 29
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 3 of 31
Data subject to change without notice.
ABBREVIATIONS
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 4 of 31
Data subject to change without notice.
GENERAL INTRODUCTION ON TL SERIES
The TL series digital radio family is IP/SDH high capacity microwave radio
system designed for trunk, spur , access , nodal , mobile backhaul transmission
applications.
The TL series operates in the radio frequency bands of 4/5/U6/8/11 GHz with
40 MHz RF channel spacing and 4/L6/U6G/7/8/13 GHz with 30 MHz RF channel
spacing (28/29/29.65/30 MHz). The equipment is fully solid state and designed
to meet latest ETSI and R&TTE standards, ITU-T and ITU-R Recommendations
for long haul and high capacity digital microwave radio systems.
The TL can be used in various types of IP/SDH networks such as ring, media
diversity or linear configurations, and various transmission path conditions such
as over water, over mountains, inter or intra city routes.
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 5 of 31
Data subject to change without notice.
Applications
The TL Series has been conceived and designed to cover a wide range of applications, such as:
Product Range
The TL Series is available in all frequency bands from 4 to 13GHz, managing N+1 or N+0 & M+1 or M+0
configurations
up to 16 channels (16xSTM-1 or 2Gbit/s) with any mixed combination of Giga ETH or STM-1 interfaces for
the Standard shelf
up to 4 channels (4xSTM-1 or 1Gbit/s) with any mixed combination of Giga ETH or TDM interfaces the
Compact shelf
The modulation scheme used is fixed (for STM-1 signals) or adaptive coded modulation (ACM) operation of
4/16/32/64/128/256/512/1024 QAM depending on the propagation condition for IP traffic.
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 6 of 31
Data subject to change without notice.
Main Features
TL radio systems provides a super high density packaging System applications per 1,800/2,200 mm ETSI rack.
A TL radio systems can support in a single rack a Configuration N+1 or N+0 mixed ACCP/ACAP/CCDP with SD
(space diversity) & TSD (transmit space diversity with up to 16 channels).
Single and dual RF bands (eg 4, 7 GHz) and single terminal and dual terminal (Repeater) are supported within
same rack.
TL series provides a wide set of countermeasures against fading in order to maximize system performances
including:
High power amplifier using GaAs Field Effect Transistor (GaAs FET) with +33 dBm (4QAM-64QAM), +32
dBm (128QAM), +31 dBm (256QAM), +30 dBm (512QAM) output power for 4-8 GHz band
High efficiency error correction using Low Density Parity Check (LDPC)
Transmit Space Diversity with two antennas for severer propagation condition is also available.
Powerful 21-tap adaptive time domain equalizer 10-tap fully digital linear transversal equalizer (LTE) with
10-tap decision feedback equalizer (DFE)
STM-1 and Gigabit Ethernet (GE) electrical or optical interfaces are available with any mixed combination.
RF high power output, XPIC, SD receiver function, TX power overdrive, adaptive code modulation scheme are
provided configurable by license key without any replacement of hardware. (One platform configuration).
All line up operations are made via SW allowing an easier on-site test and maintenance without measuring
instruments.
Automatic IF-IF response adjustment, automatic SD DADE adjustment, automatic XPIC DADE adjustment,
automatic baseband DADE adjustment and built-in delay equalization on WebLT and the upgradation by software
download (SWDL) are available.
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 7 of 31
Data subject to change without notice.
TL Standard - SYSTEM OVERVIEW
Mechanical Layout
Example of 7+1 GP1 Point-to-Point Terminal
Figure 1 - Example of U6G, 7+1 Mixed ACCP/ACAP/CCDP Operation Point to Point Terminal
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 8 of 31
Data subject to change without notice.
Mechanical Configuration
TL radio equipment is composed as follows:
BRU (max. x48 TX/RX/SD BPFs, max. x8 BEFs and max. 8 waveguide ports)
TRMD shelf with PCB back-wired-board (BWB) and bonnet cover (maximum sixteen (16) complete radio
systems are configured)
Extension BB shelf with PCB back-wired-board (BWB) and bonnet cover (maximum sixteen (16) BRSW and
BB INTF cards are configured)
Cards: TRMD, BBINTF, ADPT, GESW, STM4O, SV, AUX and BRSW
Inter-shelf multi-pin cable with connectors both ends for 1+1 BB redundant
Rack
There are two (2) types of rack available:
1,800 mm ETSI standard rack
2,200 mm ETSI standard rack used as option for applying 1+1 BB redundant
BRU
Branching network (BRU) is consists of RF TX/RX/SD BPF unit, RF BEF, circulator and coaxial connection cables.
Connection between BRU BPF unit and TRMD card is made with BMA plug-in connectors on TR ADPT without
manual cable connection.
TRMD shelf
On the TRMD shelf, there are connectors and power supply terminals as follows:
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 9 of 31
Data subject to change without notice.
Ext-BB shelf (future option)
On the Extension Baseband (Ext-BB) shelf, there are connectors and power supply terminals as follows:
BRU unit
BRU is used for terminal and repeater station. BRU for mixed ACCP/ACAP/CCDP mechanical construction is as
follows:
Maximum four (4) Duplexer (DUP), waveguide antenna port for TX/RX
Maximum four (4) Adaptor (ADPT), waveguide antenna port for SD RX or TX/SD
Maximum eight (8) TRMD adaptor (TR ADPT) for TRMD unit and BRU filter
Maximum forty eight (48) plug-in RF filters for TX, RX and SD
TX switch and RX hybrid for 1+1 Hot-standby (future option)
Maximum six (6) Band Elimination Filter (BEF) for innermost RF channel
One set of semi-rigid cable connection between DUP/ADPT and circulator
One set of semi-rigid cable connection between circulators
VENT unit
VENT unit is used for terminal and repeater station. VENT unit for combined ACCP/ACAP/CCDP construction is
composed by Maximum eight (8) ventilators units (One VENT for two TRMDs).
TRMD card
The Transceiver and Modem card (TRMD) for combined ACCP/ACAP/CCDP is used for terminal and repeater.
Card and cable construction is as follows:
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 10 of 31
Data subject to change without notice.
BB INTF-X card
BB INT-X card of TRMD shelf for all system applications is used for terminal and repeater station. BB INTF-X
card for combined ACCP/ACAP/CCDP construction is as follows:
COM card
Common unit of TRMD shelf for N+1 & M+1 point-to-point terminal operation is used for terminal and
repeater station. COM card and module construction are as follows:
Maximum two (2) optional GE interface cards with SFP module 1000BASE-T/1000BASE-
SX/1000BASE-LX
Maximum two (2) optional STM-4 optical cards (STM4O) (Future option)
Maximum two (2) optional Auxiliary signal cards (AUX)
Maximum two (2) optional Adaptor card (ADPT)
Maximum three (3) optional VF modules on AUX card
Maximum three (3) optional G.703 64 kbit/s modules on AUX card
Maximum three (3) optional V-11 64 kbit/s modules on AUX card
Common card of TRMD shelf for N+1 & M+1 dual/double terminal operation is used for terminal and repeater
station. COM card and module construction are as follows:
Supervisory and controller card (SV) for GP1
Optional GE interface card with SFP module 1000BASE-T/1000BASE- SX/1000BASE-LX per direction
Optional STM-4 optical card (STM4O) per direction ) (Future option)
Optional auxiliary signal card (AUX) per direction
Optional adaptor card (ADPT) per direction
Maximum three (3) optional VF modules on AUX card per direction
Maximum three (3) optional G.703 64 kbit/s modules on AUX card per direction
Maximum three (3) optional V-11 64 kbit/s modules on AUX card per direction
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 11 of 31
Data subject to change without notice.
Common card of TRMD shelf for N+1 & M+1 dual/double terminal operation is used for terminal repeater
station. COM card and module construction are as follows:
Supervisory and controller card (SV)
Optional Auxiliary signal card (AUX)
Optional Adaptor card (ADPT)
Maximum three (3) optional VF modules on AUX card
Maximum three (3) optional G.703 64 kbit/s modules on AUX card
Maximum three (3) optional V-11 64 kbit/s modules on AUX card
Hot Swap
Hot swap for all cards available.
User interface area (UIA) on TRMD shelf has the interface connectors for signals and terminals/ arrestor for DC
power system. DC Power terminal, arrestor and connecters are located below:
DC power terminal Located on BWB of shelf, dual-feed available (X-port and Y-port).
Arrestor for lightning protection
Multi-pin connecters for external equipment (HK & RAB)
o HK & RAB: on BWB
o RUC/OW: on AUX card
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 12 of 31
Data subject to change without notice.
User interface Area (UIA) on Ext-BB shelf
User interface area (UIA) on Ext-BB shelf has the interface connectors for signals and terminals/ arrestor for DC
power system.
DC power terminal Located on BWB of shelf, dual-feed available (X-port and Y-port).
Arrestor for lightning protection
Multi-pin connecters between TRMD shelf and Ext-BB shelf Data & ALM/CONT: on BWB
Card Construction
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 13 of 31
Data subject to change without notice.
TL Compact - SYSTEM OVERVIEW
Mechanical Layout
Example of 3+1/4+0 GP1 Point-to-Point Terminal with TDM interface or IP interfaces
1
4
VENT1 VENT1
1
4
1
4
FAN FAN
GE ADPT(W2)
GE ADPT(W3) GE ADPT(W1)
BBINTF(W2)
BBINTF(W3)
CONT CONT
TRMD(GP1-P)
TRMD(GP1-P)
TRMD(GP1-1)
TRMD(GP1-2)
TRMD(GP1-3)
TRMD(GP1-1)
TRMD(GP1-2)
TRMD(GP1-3)
PS(CB)
PS(CB)
SV
SV
GESW(X)
GESW(Y)
BBINTF(W1)
GE ADPT(P)
BBINTF(P)
Figure 2 - Example of 3+1/4+0 Operation Point to Point Terminal with TDM interface (left side) or IP interface (tight side)
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 14 of 31
Data subject to change without notice.
Mechanical Configuration
TL Compact radio equipment is composed as follows:
BRU, Ventilator and Heater units and common cards are installed and coaxial plug-in connections
between TRMD and TX/RX/SD BPF are made.
BRU (max. x12 BPFs, max. x4 BEFs and max. 4 antenna ports)
TRMD, BBINTF, BBINTF T1, BBINTF (SPC), GE ADPT, GE ADPT T1, GESW and SV
Coaxial cables with connectors both ends for BRU
All units and cards are installed in the compact cabinet with shelf and back-wired board. Two types of compact
cabinets are available. One is compact cabinet with heat radiator and sun shade for all-outdoor use and the other
is compact cabinet without heat radiator and sun shade for all-indoor use.
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 15 of 31
Data subject to change without notice.
BRU block:
Branching network (BRU) is consists of RF TX/RX/SD BPF unit, RF BEF, circulator and coaxial connection cables.
Connection between BRU BPF unit and TRMD card is made with BMA plug-in connectors on TR ADPT without
manual cable connection
Maximum four (2) Duplexer (DUP), waveguide antenna port for TX/RX
Maximum four (2) Adaptor (ADPT), waveguide antenna port for SD RX or TX/SD
One TRMD adaptor (TR ADPT) for TRMD, FAN and BRU filter
Maximum twelve (12) plug-in RF filters for TX, RX and SD
Maximum six (4) Band Elimination Filter (BEF) for innermost RF channel
One set of semi-rigid cable connection between DUP/ADPT and circulator
One set of semi-rigid cable connection between circulators
TRMD block:
BBINTF cards for TDM interfaces is used for terminal and double terminal station as follows:
Maximum four (4) optional BBINTF cards for STM-1 optical with 2 Mb/s WS
Maximum four (4) optional BBINTF T1 cards for STM-1 optical with 1.5 Mb/s WS
Optional BBINTF(SPC) card for TDM & IP hybrid operation
GE Adaptor (GE ADPT) card is used when GESW card is installed and function is to connect signals GESW card and
TRMD card
GE Adaptor (GE ADPT T1) card is used when GESW card is installed and function is to connect signals between
GESW card and TRMD card. Also 1.544 Mbit/s wayside signal interface is available per GE ADPT T1 card
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 16 of 31
Data subject to change without notice.
SV Supervisory and control card is used for terminal and double terminal station.
Housekeeping connector on FAN CONT unit is used when housekeeping information is needed. Maximum item is
12-item for digital supervision and 8-item for digital control
User interface area (UIA) on compact cabinet has the interface connectors for signals and terminals/ arrestor for
DC power system. DC Power terminal, arrestor and connecters are located below:
Card Construction
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 17 of 31
Data subject to change without notice.
TL Series
Configurations
Configurations supported are:
N+1 or N+0 & M+1 or M+0 combined ACCP/ACAP/CCDP with/without SD/TSD
(Maximum 4/16 systems with single/dual RF band, Point-to-Point Terminal)
N+1 or N+0 & M+1 or M+0 combined ACCP/ACAP /CCDP with/without SD/TSD
(Maximum 4/16 systems with single/dual RF band, Dual/Double Terminal)
1+1 Hot-Standby (two (2) systems per rack, Point-to-Point Terminal) (Future option)
2-directional 1+1 Hot-Standby (four (4) systems per rack, Dual/Double Terminal) (Future option)
All configurations can be provided with or w/o XPIC; upgrade by software key is necessary.
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 18 of 31
Data subject to change without notice.
Space Diversity with SD Combiner
As a countermeasure against severe propagation path conditions, Space Diversity (SD) reception is provided as
option. Space diversity function is fitted as standard and enabled by license key.
The SD system generally uses two antennas, the upper and lower antennas. The Main antenna (upper) is used for
transmission and reception commonly. The SD antenna (lower) is used only for space diversity reception. TRMD
has function of two sets of receivers, one receiver (Main receiver) is connected to the Main antenna and the
other (SD receiver) is connected to the SD antenna.
The SD system can improve the Carrier to Noise Ratio (C/N) up to 2 to 3 dB during the stable propagation
condition period and significantly reduce the outage probability due to multi-path fading.
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 19 of 31
Data subject to change without notice.
ETHERNET CHARACTERISTICS
Ethernet Throughput
TL radio systems provides full-duplex Ethernet throughput ranging from 24 up to 285 Mbit/s per radio channel.
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 20 of 31
Data subject to change without notice.
IP Feature List for Gigabit Ethernet
The TL Series implements a multi-port store-and-forward Layer 2 Switch. The embedded Switch supports the
following Layer 2 functionalities:
ITEM DESCRIPTION
Ethernet Port Protection Port redundancy
Switch (CARD) redundancy
Link aggregation (Line side) Layer 1 (LCAS/VCAT like proprietary extension)
2 sets of LA group (GP1/GP2)
Maximum 16 RF CH aggregation (GP1+GP2 total)
Ethernet frame forwarding 802.1D (MAC learning)
Disabling MAC learning
Static MAC address table administration
IGMP (Internet Group Management Protocol) snooping
MLD snooping
Broadcast and multicast storm protection (Future option)
Jumbo frame: Maximum length 9.6k with full duplex
VLAN VLAN enabling/disabling
Port VLAN
Port trunking
Tag VLAN 802.1q
IEEE 802.1 QinQ handling
4096 of VLAN ID
Spanning tree STP 802.1D
RSTP 802.1W
MSTP 802.1s (Future option)
Rapid failure detection and fast re-convergence (Future option)
QoS 802.1p Priority Code Point
Port bases
ToS type of service / DSCP
Queue scheduling
Strict priority
Weighted round robin (WRR) and/or hybrid
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 21 of 31
Data subject to change without notice.
Congestion Control Drop mode
Rate Control Policer & Shaper
Ethernet Mapping on Radio Native IP radio
Bandwidth / Capacity 2Gbit/s maximum Ethernet capacity
16xSTM-1 + 34xE1 maximum TDM capacity
Ethernet/TDM shared
Traffic Capacity Allocation Slot based capacity increment
Slot based capacity decrement
No service affect when RF channel increasing/decreasing
Ethernet frame counter RMON RFC2819
IEEE Std 802.3-2002 Annex 30A
SNMP interface Group MIB (RFC1213 and 1573)
Compression & Acceralator Inter-frame Gap (IFG) suppression
Preamble suppression
Synchronizaton Synchronous Ethernet
IEEE 1588 PTP (Transparent mode) Future option
IEEE 1588 PTP (Boundary clock) Future option
Traffic Shaping Static (fixed QAM rate)
Radio side
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 22 of 31
Data subject to change without notice.
MANAGEMENT SYSTEM
WEB management (with embedded WEB server) is available for local management as an installation-less
management option.
All SIAE MICROELETTRONICA NMS solutions are based on standard protocols. SNMP Protocol is used for TMN
connections with standard communication protocol stacks and industry-standard interfaces allowing equipment
connection to any IP-based DCN.
Management Software
TL is designed on SNMP and HTTP (Hyper Text Transfer Protocol). SV card, main controller installed in the TL, is
composed both an SNMP embedded agent and a web server.
SV card has two (2) Ethernet port and two (2) DCC (Data Communication Channel) terminations from radio/line
sides as a connection port for NMS.
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 23 of 31
Data subject to change without notice.
In order to satisfy the requirements of local and centralized management, SIAE MICROELETTRONICA has
developed the following software/platforms/systems:
NMS5-LX (Element Manager) for centralized management of medium networks with up to 1000 Network
Elements per server (Linux OS)
NMS5-UX (Element Manager) for centralized management of large networks with up to 10000 Network
Elements per server (HP Unix OS)
Web LCT for maintenance and line-up activities (MS Windows® OS) accessible via Browser
For a more detailed description of SIAE MICROELETTRONICA supervision software platforms, please refer to the
specific product literature.
TL uses two (2) type of application layer protocol. HTTP on TCP/IP is used for a web based connection between
the built in web server and a client PC. SNMP on UDP/IP is used for connection between the embedded SNMP
agent and SNMP managers.
Following figures shows protocol stack which is used on Ethernet LAN of NMS connection
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 24 of 31
Data subject to change without notice.
TL Standard shelf - TECHNICAL CHARACTERISTICS
Physical Dimensions
Two types of rack are available: 1,800 mm ETSI standard rack and 2,200 mm ETSI standard rack used as option
for applying 1+1 BB redundant. Dimension are as follows:
1,800 mm ETSI standard rack 600 mm 1,800 mm 345 mm with shelf bonnet cover
2,200 mm ETSI standard rack 600 mm 2,200 mm 345 mm with shelf bonnet cover
Weight
ETSI Rack 36
Power supply
ODU Range
-40.5 -57 Vdc
According to ETSI EN300132-2
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 25 of 31
Data subject to change without notice.
Power Consumption (W)
For ACCP/ACAP/CCDP operation, STM-1 electrical/optical interface, +30 dBm output
Configuration Pc (W)
Amplitude Up to 4,500 m
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 26 of 31
Data subject to change without notice.
TL Compact Shef - TECHNICAL CHARACTERISTICS
Physical Dimensions
Dimension of TL compact cabinet for full out door application are as follows:
The Compact cabinet for full indoor application can be housed in 19/23-inch or ETSI standard rack
Weight
Power supply
ODU Range
-40.5 -57 Vdc
According to ETSI EN300132-2
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 27 of 31
Data subject to change without notice.
Power Consumption (W)
For ACCP/ACAP/CCDP operation, +30 dBm output
Configuration Pc (W)
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 28 of 31
Data subject to change without notice.
Environmental conditions (in use conditions)
Amplitude Up to 4,500 m
Climatic condition Low air temperature: -5℃ (w/o heater) / -33℃ (w heater)
High air temperature: 55℃
Low relative humidity: 4%
High relative humidity: 100%
Low absolute humidity: 0.26 g/m3
High absolute humidity: 36 g/m3
Amplitude Up to 3,000 m
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 29 of 31
Data subject to change without notice.
Frequently requested standards compliances
ETSI EN300 132-2 Power supply interface at the input to telecommunications equipment
V2.2.2- V2.2.1
ETSI EN 300 019-1-3 Environmental conditions and environmental tests for telecommunications equipment
V2.2.2 (2004-07),
ETSI EN 300 019-1-1
V2.1.4 (2003-04)
EN 300 019-2-1 V2.1.2
ETSI EN302 217-1 V1.2.1 Characteristics and requirements for point-to-point equipment and antenna
ETSI EN 301 489-1 Electromagnetic Compatibility (EMC) standard for radio equipment and services
V1.8.1 (2008-04) and
ETSI EN 301 489-4
V1.3.1 (2002-08)
EN 60950 Information Technology Equipment – Safety
ITU-R ITU Recommendations for all frequency bands
ITU-R F.1191 Bandwidths and unwanted emissions of digital fixed service systems
CEPT CEPT Recommendations for all frequency bands
IEEE Std 802 802.1d (MAC Bridges)802.1Q (VLAN), 802.1s (MSTP),802.1W (RSTP), 802.3-2002- Annex
30A (IEEE Standard for Local and Metropolitan Area Networks) 802.3z (1000BASE LX/SX)
ITU-T G.812 Timing requirements of slave clocks suitable for use as node clocks in synchronization
networks
ITU-T G.813 Timing characteristics of SDH equipment slave clocks (SEC)
ITU-T G.783 Characteristics of synchronous digital hierarchy (SDH) equipment functional blocks
Document Number
TL Series – IP & Hybrid / N+1
Brochure B.TL.1.11-17
SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA Page
S.p.A. No part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE
MICROELETTRONICA S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 30 of 31
Data subject to change without notice.
SIAE MICROELETTRONICA S.p.A., Via Michelangelo Buonarroti, 21, Cologno Monzese (Mi), Italy