Documente Academic
Documente Profesional
Documente Cultură
5 Hz
a load, it is necessary to use
a. a resistor between source and load Explanation:
b. an inductor between source and load
c. a capacitor between source and load
d. either a or b
7. In the figure, V and V. Which
2. For the base current of 10 , what is the diode will conduct?
value of the collector current in a common
emitter circuit if ?
a.
b.
c.
d.
a. V
b. mV
c. 10 V
d. 10 mV
a. 5 mA
b. 5
c. 10 mA
d. 10
a. only.
a. 20 V b. only.
b. 4.4 V c. Both and .
c. 0.4 V d. Neither nor .
d. 0.44 V
33. A forward voltage of 9 V is applied to a diode
29. The self bias provides in series with a 1-k load resistor. The
a. stable Q-point voltage across load resistor is zero. It
b. large voltage gain indicates that
c. high input impedance a. the diode is short-circuited
d. high base current b. the diode is open-circuited
c. the resistor is open-circuited
30. In the figure below, what is the value of if d. the diode is either short-circuited or
. Neglect . open-circuited
Explanation:
a. 0.99
b. 1.98
c. 2.0
36. A bridge rectifier circuit has input of 50 Hz d. 400
frequency. The load resistance is , and filter
capacitance is . For a good output wave Explanation:
shape, the time constant should be at
least equal to
a. 10 ms
b. 20 ms
c. 50 ms
d. 100 ms
37. The silicon transistor in the following figure 40. An exponential amplifier has diode in
has , , V, V, feedback path.
mA, then will be a. True
b. False
a. 0.3
b. 0.4
c. 0.6 a. 10 V and 4 k
d. None b. 5 V and 4 k
c. 2 V and 4 k
46. The quiescent collector current , and d. 2 V and 10 k
collector to emitter voltage in a CE
connection are the values when
a. AC signal is zero.