Documente Academic
Documente Profesional
Documente Cultură
Factory Assessment
Home > Municipality Business > Dubai Central Laboratory > Product Certification Services > Factory Assessment
About Laboratory This is the most comprehensive and most widely used type of certification that involves:
Accreditation and ◾ (a) auditing of the factory quality management system for compliance with ISO 9001
Certification requirements, and
Services ◾ (b) assessment of the product’s conformance with the standard specification.
Training Services
Contact The factory must satisfactorily meet both requirements in order to be granted a license to use the
DCL Mark on their product.
FAQ
Useful Links The audit of the factory quality management system is carried out in accordance with the
requirements of ISO 9001 standard for quality management systems. It consists of an initial audit of
Location Map
the factory and its management and followed by regular surveillance audit to ensure continuing
Product Certification compliance with the requirements.
Services
Product Certification Assessment of the product consist of initial type testing on samples collected during the initial audit
Ready Mix of the factory and followed by surveillance testing of the product in the market as well as from
Certification factory. In order to be certified, the test results must meet the requirements of the product standard
specification.
Factory Assessment
Block Batch
Certification CERTIFICATION THROUGH FACTORY ASSESSMENT (LICENSING FOR THE USE OF THE DCL MARK)
Factory Assessment Under this scheme, a supplier may apply for certification of his product against recognized
for Block Factories international, national, or local specifications. DCLD shall carry out initial type testing of the product
against the relevant standard specification requirements by selecting random samples and sending
Green Building
them to recognized laboratories for testing. Certification auditors will then carry out assessment of
Certification
the factory quality management system against the requirements of ISO 9001 standard. When the
Supplier Registration results of the type testing and factory assessment are satisfactory, the supplier is granted a license to
Type1 Product affix the DCL-MARK on their product. The Mark is an indication that the product has been certified as
Certification having complied with the relevant standard specifications.
Technical Approval Applicants for certification through factory assessment may submit their application using form DM-
Halal Certification DCLD-F-IC-2001. The general rules, procedures and requirements for this scheme are given in DM-
DCLD-RD-DP21-2001(IC). The specific requirements for each particular product are given in the
Certified Products
“Specific rules” for that particular product. The currently available certification schemes and their
List of Certified corresponding specific rules can be found through this link:
products Under the
Factory Assessment
Scheme
Inspection
https://www.dm.gov.ae/en/Business/DubaiCentralLaboratory/ProductCertificationService... 10/15/2019
Factory Assessment Page 2 of 8
https://www.dm.gov.ae/en/Business/DubaiCentralLaboratory/ProductCertificationService... 10/15/2019
Factory Assessment Page 3 of 8
https://www.dm.gov.ae/en/Business/DubaiCentralLaboratory/ProductCertificationService... 10/15/2019
Factory Assessment Page 4 of 8
Heating
System
https://www.dm.gov.ae/en/Business/DubaiCentralLaboratory/ProductCertificationService... 10/15/2019
Factory Assessment Page 5 of 8
Glazed Glass Glazed glass as per 2010 Dubai Green Mandatory as per RD-DP21-2192
Building Regulations and DM Circular (198) (IC)
Specifications 2014
https://www.dm.gov.ae/en/Business/DubaiCentralLaboratory/ProductCertificationService... 10/15/2019
Factory Assessment Page 6 of 8
• IMS-RD-13 :Terms and conditions for the use of the DCL Mark of Conformity.
Certification Fees varies with different schemes. Fee structure for specific schemes can be requested
through the contact information below. A formal certification proposal with all details will be sent to
applicants.
https://www.dm.gov.ae/en/Business/DubaiCentralLaboratory/ProductCertificationService... 10/15/2019
Factory Assessment Page 7 of 8
The maximum downloadable file size is 15MB regardless of the file type (PDF, MS Office
Documents..)
Send Participate
+4)
FAQs Initiatives and Projects
Site Map Website Policies Copyright © Dubai Municipality 2019, All Rights Reserved Website Version no: v 6.0
Last Modification: 31 March 2019
https://www.dm.gov.ae/en/Business/DubaiCentralLaboratory/ProductCertificationService... 10/15/2019
Factory Assessment Page 8 of 8
https://www.dm.gov.ae/en/Business/DubaiCentralLaboratory/ProductCertificationService... 10/15/2019