Documente Academic
Documente Profesional
Documente Cultură
I. Direction: Read each statement carefully and choose the best answer from the options
given. Write only the letter of your answer in the space provided.
____1. Set the eye to screen distance that permits you to most easily focus on the screen.
a. True b. False
____2. Changing posture at frequent intervals maximizes fatigue when using a computer.
a. True b. False
____3. Place the keyboard in a position that allows the forearms to be close to the horizontal
and the wrists to be straight.
a. True b. False
____4. It is recommended that operators avoid spending more than five hours a day on
keyboard duties and no longer than 50 minutes per hour without a postural/stretching break.
a. True b. False
____5. To detect whether there are reflections from the desk surface, the worker should hold
the book below the surface and assess the change in reflected glare from the screen.
a. True b. False
____6. 10,000 - 12,000 keystrokes per hour is considered an acceptable standard in typing.
a. True b. False
____7. Good posture is essential for all users of computers.
a. True b. False
____8. The solution is to increase the refresh rate of the monitor to at least 75hz.
a. True b. False
____9. Cables running across the floor
a. chemical hazard b. physical hazard
c. mechanical hazard d. electric shock hazards
____10. Hot components or sharp edges of computers
. a. chemical hazard b. physical hazard c. mechanical hazard d. electric shock
hazards
____11. Inkjet printer cartridge.
a. chemical hazard b. physical hazard
c. mechanical hazard d. electric shock hazards
____12. Exposed power cable.
a. chemical hazard b. physical hazard c. mechanical hazard d. electric shock
hazards
____13. Open casing of computer monitor
. a. chemical hazard b. physical hazard
c. mechanical hazard d. CRT monitor high voltage hazard
____14. It is represented by a rectangle. It refers to an action in a business process.
a. Decision b. Process
c. Arrow line d. Connector
____15. It is represented by a diamond. A process that can answer a decision of "yes" or "no"
requires decision box.
a. Decision b. Process
c. Arrow line d. Connector
____16. It is represented by a small circle or a connector box and is labelled using letters.
a. Decision b. Process
c. Arrow line d. Connector
____17. Drawn in one direction, preferably from top to bottom to keep a flowchart clear.
a. Decision b. Process
c. Arrow line d. Connector
____18. A process is represented by a rectangle with double lines on each side.
a. Decision b. Sub-Process
c. Arrow line d. Connector
____19. It is installed in the back corner of the PC case, next to the motherboard. It converts
120vac (standard house power) into DC voltages that are used by other components in the
PC.
a. Optical drive b. power supply
b. c. Expansion Bus d. adapters
____20. It accepts data and instructions from the user or from another computer system.
Mouse
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
Create a Flowchart from the following(10pts)
Algorithm
Step-1 Start
Step-2 Input two numbers say
NUM1,NUM2
Step-3 IF NUM1 < NUM2 THEN
print smallest is NUM1
ELSE
print smallest is NUM2
ENDIF
Step-4 Stop
-You are capable of amazing things. God bless! (Do not be anxious about anything, but in everything
by prayer and supplication with thanksgiving let your requests be made known to God.)
_______ 2. All tools and equipment must be properly maintained so that workers are not
endangered.
_______ 4. Productivity is increased because time is not lost looking for tools, parts and
equipment is one of the
benefits of proper storage.
_______5. Health and safety procedure is the responsibility of all persons in the computer and
technology industries.
_______6. Inkjet printer cartridges, or laser printer toner cartridges are hazardous to users.
_______7. Good posture is essential for all users of computers.
_______8. A well designed mouse should not cause undue pressure on the wrist and forehead
muscles.
_____ 1. Which tool is used for hardware to stand on to prevent static electricity from building
up?
a. Anti-static mat c. Philips head screwdriver
b. Hex driver d. Wire cutter
_____2. Which tool is sometimes called a nut driver? It is used to tighten nuts in the same way
that a screwdriver tightens screws?
a. Anti-static mat c. Philips head screwdriver
b. Hex driver d. Wire cutter
_____4. On electrical components, an excessive buildup of dust will act like an _________ and
trap the heat.
a. Insulator c. part
b. Conductor d. peripheral
_____5. When compressed air is used to clean inside the computer, the air should be blown
around the components with a minimum distance of ______ inches from the nozzle.
a. 2 b. 3 c. 4 d. 5
_____7. Temporary storage for data and programs that are being accessed by the CPU.
a. RAM b. ROM c. DIMM d. RIMM
_____8. A storage device that uses lasers to read data on the optical media.
a. Flash Drive b. Hard Drive c. Floppy Drive d. Optical Drive
a) Algorithm
1. Start
2. Sum = 0
3. Get the first testscore
4. Add first testscore to sum
5. Get the second testscore
6. Add to sum
7. Get the third testscore
8. Add to sum
9. Get the Forth testscore
10. Add to sum
11. Get the fifth testscore
12. Add to sum
13. Get the sixth testscore
14. Add to sum
15. Output the sum
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
-You are capable of amazing things. God bless! (Do not be anxious about anything, but in everything
by prayer and supplication with thanksgiving let your requests be made known to God.)
I. IDENTIFICATION
Direction: Identify the following. Write your answer on the blank space provided before the
number. Choose your answer on box below.
_______________1. It is an electronic hardware device that can accept and process data.
_______________2. These are the most important element of a computer system.
_______________3. These are programs or instructions that a computer must follow to do its task.
_______________4. These are the physical components that you can feel or touch.
_______________5. It includes texts and numbers, sounds, images, and video that we input into the
computer for processing.
_______________6. It means that a computer must be connected to other computers especially
through the internet.
_______________7. These are step by step instructions to follow when using hardware, software, and
data.
_______________8. These are the programs that people use for their day to day tasks on the
computer.
_______________9. It operates and functions under the control of instructions called programs.
_______________10. It is called the brain of the computer.
III. ENUMERATION
Direction: Enumerate the following.
1-5 Elements of a Computer System
6-8 Advantages of using the Computer
9-11 Disadvantages of using the Computer
12-15 Types of Computers
16-20 Components inside the CPU Box
IV. ESSAY
Direction: Explain the following briefly. (5 points each)
1. Why does the CPU called the “brain of the computer”?
2. What are the uses of computer?
-You are capable of amazing things. God bless! (Do not be anxious about anything, but in everything
by prayer and supplication with thanksgiving let your requests be made known to God.)
I. IDENTIFICATION
Direction: Identify the following. Write your answer on the blank space provided before the
number. Choose your answer on the box below.
___________1. It is a telecommunications network which allows computers to exchange data.
___________2. These are network computer devices that originate, route and terminate the data.
___________3. It is the best known computer network.
___________4. It is the means of connecting one location to another for the purpose of transmitting
and receiving digital information.
___________5. It is widely used for cable television systems, office buildings, and other work-sites for
local area networks.
___________6. It is most widely used medium for all telecommunication.
___________7. It is an electronic device that receives a network signal, cleans it of unnecessary
noise, and regenerates it.
___________8. These are used to connect network nodes via wire not originally designed for digital
network traffic, or for wireless.
___________9. It is a network device for controlling network security and access rules.
___________10. It is a repeater with multiple ports is known.
II. ENUMERATION
Direction: Enumerate the following.
1-5 Network Nodes
6-10 Network Topologies
11-15 Types of Network
16-18 Wired Technologies
19-20 Wireless Technologies
IV. APPLICATION
Direction: Do what is being asked. (5 pts.each)
1. Draw a diagram of a local area network.
2. Draw the fully connected network topology.
3. Write down the RJ45 color codes (Set A or Set B).
-You are capable of amazing things. God bless! (Do not be anxious about anything, but in everything
by prayer and supplication with thanksgiving let your requests be made known to God.)
II. Directions: Write T for True; otherwise F on the blank before each item.
III. Directions: Write SO for Social Media as social network, BS for bookmarking site, SN for social news,
MS for media sharing, MI for micro blogging, and BF for blogs and forum.
-You are capable of amazing things. God bless! (Trust in the LORD with all your heart, and do not
lean on your own understanding.)