Documente Academic
Documente Profesional
Documente Cultură
Guranteed Technical
III To be filled by the Bidder
Particular
A. MID SPAN COMPRESSION JOINTS 161 kV Line
TAG CORPORATION,
Thiruneermalai road,
1 Maker's name and country
Chrompet, Chennai - 600 044.
Tamil Nadu, INDIA.
2 Type Compression
3 Suitable for (Conductor size) (mm) Ø20.6
Materials of joint with reference of ISS to which it
4 conforms
a) Aluminium alloy sleeve Al.alloy (Type-63400, IS:733)
5 Shape of cross-section
a) Before compression Hollow circular
b) After compression Hexagonal
6 Outside diameter of sleeves
a) Before compression
i) Aluminium alloy (mm) Ø38±1
b) After compression
Aluminium alloy (mm)
i) Corner to corner (mm) 37±0.5
ii) Surface to surface (mm) 32±0.5
7 Inside diameter of sleeves
a) Before compression
i) Aluminium alloy (mm) Ø23±0.5
8 Length of sleeves
a) Before compression
i) Aluminium alloy (mm) 670±5
b) After compression
i) Aluminium (mm) 745±5
9 Weight of sleeve in
i) Aluminium alloy (kg.) 1.27 kg (Approx.)
Breaking strength of the mid span joint as percentage
10 of ultimate tensile strength of Not less than 95% of Conductor UTS
conductor (%)
Conductivity of the compression joint expressed as
11 percentage of the conductivity of equivalent length >100 %
of the conductor(%)
Whether compression and non-compression joints
12 marked on the sleevs. Yes
B. REPAIR SLEEVE
TAG CORPORATION,
Thiruneermalai road,
1 Maker's name and country
Chrompet, Chennai - 600 044.
Tamil Nadu, INDIA.
2 Type Compression
3 Suitable for Conductor size (mm) Ø20.6
4 Shape of cross-section
a) Before compression Hollow circular
b) After compression Hexagonal
5 Inside diameter of sleeves (mm)
Before compression Ø23±0.5
6 Outside diameter of sleeve
a) Before compression (mm) Ø38±1
b) After compression
i) Corner to corner 37±0.5
ii) Surface to surface 32±0.5
7 Length of sleeve
a) Before compression (mm) 250±5
b) After compression (mm) 278±5
8 Weight of sleeve 0.48
Conductivity of the repair sleeve expressed as
9 percentage of the equivalent length of Bare >100 %
conductor (%)
10 Material and standard to which conforming Aluminium purity
Breaking strength as % of UTS of conductor
11 Not less than 95% of Conductor UTS
20 Galvanization
(a) method of galvanization
i) Spring washers Electro galvanizing
ii) Other spare parts Hot - dip galvanizing
(b) no. of dips
i) One minute Ferrous components - 6 Dips
Ferrous washers - 4 Dips
ii) Half minute -
(c) minimum weight of zinc coating (g/sq. m)
i) Casting 610 gm/m2
ii) Wires 305 gm/m2
Certification Mark (ISI/BS/or any other
21 International Standard) -
22 Packing details
i) Marking Standard
ii) Standard to which conforming -
V OPGW ACCESSORIES
A. SUSPENSION ASSEMBLY -
1 Manufacturer's name & address -
2 Type -
3 Material -
Drawing no. (give complete details and dimension
4 including no. of components) -
15 Packing details -
16 Other details, if any -
B. TENSION ASSEMBLY
1 Manufacturer's name & address -
2 Type -
3 Material -
(a) Body -
(b) Bolts and nuts -
Drawing no. and dimension
4 and no. of co -
17 Packing details -
18 Other details, if any -
C. VIBRATION DAMPERS
1 Maker's name & Country -
2 Type -
3 Suitable for earth wire of size (mm) -
Material with reference of ISS to which it conforms
4 -
(a) Clamp -
(b) Messenger cable -
(c) Weight -
Reference of manufacturer's drawing and
5 catalogue no. etc. -
1 Type of insulator -
2 Maker's name,address and country -
3 Material and Governing standard -
Detailed dimensional drawing indicating tolerances for
4 each type of insulator disc enclosed (YES/NO -
a) Dry -
i) Suspension -
ii) Tension -
b) Wet -
i) Suspension -
ii) Tension -
Impulse 1.2x50 microsecond withstand voltage -KV
11 (peak) -
a) +ve Wave -
i) Suspension -
ii) Tension -
b) -ve Wave KV (peak) -
i) Suspension -
ii) Tension -
12 Power frequency flashover voltage -KV (rms) -
a) Dry -
i) Suspension -
ii) Tension -
b) Wet KV (rms) -
i) Suspension -
ii) Tension -
Impulse 1.2x50 microsecond flashover voltage KV
13 (peak) -
a) +ve Wave -
i) Suspension -
ii) Tension -
b) -ve Wave -
i) Suspension -
ii) Tension -
14 Power frequency puncture voltage KV (rms) -
a) Suspension -
b) Tension -
(ii) Corona extinction voltage KV (rms) -
a) Suspension -
b) Tension -
15 RIV at 10 KV (rms) -
a) Suspension (microvolts) -
b) Tension (microvolts) -
16 Weight of the Insulator disc (kg) -
a) Suspension -
b) Tension -
17 Locking device -
a) Type -
i) Suspension -
ii) Tension -
b) Material -
i) Suspension -
ii) Tension -
c) Standard to which conforming -
18 Socket and ball ended component -
a) Standard to which conforming -
b) Material and Standard to which conforming -
c) Galvan -
d) Quality of zinc and Standard to which
conforming -
Dry/Wet -
i) Suspension -
1) Single -
2) Double -
ii) Tension -
1) Single -
2) Double -
Power frequency flashover voltage KV (rms)
4 Dry/Wet -
i) Suspension -
1) Single -
2) Double -
ii) Tension -
1) Single -
2) Double -
5 Impulse withstand voltage (dry) KV (peak) -
Positive wave -
i) Suspension -
1) Single -
2) Double -
ii) Tension -
1) Single -
2) Double -
Negative wave -
i) Suspension -
1) Single -
2) Double -
ii) Tension -
1) Single -
2) Double -
6 Impulse flashover voltage (dry) -
Positive wave - KV (peak) -
i) Suspension -
1) Single -
2) Double -
ii) Tension -
1) Single -
2) Double -
Negative wave - KV (peak) -
i) Suspension -
1) Single -
2) Double -
ii) Tension -
1) -
2) -
7 Corona extinction voltage - KV (rms) -
a) Dry/Wet - KV (rms) -
i) Suspension -
1) Single -
2) Double -
ii) Tension -
1) Single -
2) Double -
Maximum RIV for complete string i.e. including arcing
8 horns, clamps etc. at 154 KV (rms) (in -
microvolt)
a) Single Suspension -
b) Single Tension -
9 Creepage distance of complete string -
a) Single suspension -
b) Double suspension -
c) Single Tension -
d) Double Tension -
Detailed Dimensional drawing for insulator strings
10 with tolerances attached for: -