Documente Academic
Documente Profesional
Documente Cultură
I was given raw gravity data and using that I did gravity data processing and inversion. First of all I corrected the data
for Drift changes due to instrument error then applied all the gravity corrections to get Bouguer anomaly caused by
anomalous density distribution using Matlab software.
%%===============Instrument Constant==============>
IC = 0.1008;
%%============Drift Correction==============>
len = length(reading);
format long;
drift_rate = (reading(len) - reading(1))/del_time(len);
total_drift = drift_rate * del_time;
corrected_reading = reading - total_drift;
division = corrected_reading - corrected_reading(1);
difference_mGal = division * IC;
G_observed = difference_mGal + absolute_base_station_reading;
After this I applied 2D gravity data inversion algorithm based on tomography problem to get actual subsurface mass
distribution.
** For 2D inversion. I took reference from of research paper published by Animesh Mandal, research scholar at IIT
Kharagpur.
Link: Integrated Geophysical Survey for the Delineation of Sub-surface Structure Associated with Uranium
Mineralization, South Purulia Shear Zone, India