Documente Academic
Documente Profesional
Documente Cultură
V0.0 0915
1
Contenido
DVR
Mouse Adaptador de
corriente
Guía CD de
rápida instalación
2
Partes
Panel frontal
1. Botones de navegación
2. Confirmar
3. Reproducir
4. Salir
5. Indicadores de funcionamiento
a)Encendido
b)Disco duro
c)Grabación
6. LED IR
5 3 1
6 a b c 4 2
Panel trasero
VIN7 VIN5
VIN8 VIN6
RS-485
3
Recomendaciones previas a la instalación
• Instale el equipo en un lugar seguro y, de ser posible, bajo llave para
evitar cualquier mal uso o robo.
• Elija un lugar estable y ventilado para colocarlo; alejado de fuentes de
calor (calefacción, chimeneas, cocina, etc.) o de vibraciones.
• Considere el espacio suficiente para alojar el equipo y el cableado de
las cámaras.
• Conecte el equipo a una fuente de respaldo de energía (no break) para
protegerlo de una descarga eléctrica y para que siga funcionando en
caso de algún corte en el suministro de energía.
• Evite conectarlo a un multicontacto, ya que otros equipos conectados
podrían causar variaciones de corriente.
• Se recomienda que lo instale cerca de un router o un módem.
• Revise periódicamente el correcto funcionamiento del equipo y la
memoria disponible en el disco duro.
Monitor
Fuente de alimentación
múltiple para cámaras o
adaptador de corriente
por cámara
Router
Transceptores
4
Conexiones
a) Conexión de cámaras
Conecte las cámaras digitales en pares. Si conecta una cámara digital
y una analógica, esta última no transmitirá imagen. Puede conectar 8
cámaras digitales, o bien, 8 cámaras analógicas como máximo.
D D
D A
2
4
5
5
Utilice una fuente de alimentación múltiple de 12 V o un adaptador
de corriente por cámara.
Considere el consumo de corriente de cada cámara para no
superar la carga permitida de la fuente de alimentación.
c) Encender el DVR
6
Diagrama de conexión
7
Configuración
Después de conectar el equipo, deben visualizarse en la pantalla las
imágenes transmitidas por las cámaras conectadas. Habilite la casilla
Cloud Services Enable y luego haga clic en Next, como se muestra en
la siguiente imagen:
No es necesario que
escanee los códigos
QR, por el momento
están inhabilitados.
8
Haga clic con el botón derecho en cualquier área de la pantalla y elija la
opción Main Menu.
a) Entrar al sistema
User: admin
Password: 123456
9
2. Dé clic en OK.
10
2. Luego, dé clic en General.
11
4. Seleccione el idioma que requiera y dé clic en App.
5. El equipo debe reiniciarse para guardar los cambios. Haga clic en OK.
12
6. Una vez que el equipo se haya reiniciado, dé clic en próximo y en OK,
como se muestra en las imágenes:
13
Grabación
El equipo está configurado para grabar en todos los canales
automáticamente.
1.- Para deshabilitar algún canal, dé clic derecho en cualquier área de la
pantalla y elija la opción Video Control.
3.- Elija el canal que desea deshabilitar en la opción cerrar. Confirme con
OK.
14
Reproducción
1. Ingrese a la opción Video consulta
15
Monitoreo remoto (smartphone, iphone y
tablet)
1. Entre al menú principal en el DVR y de clic en la opción de
Red Configure.
16
3. Descargue la aplicación N-eye en Play Store o App Store e instálela
en su dispositivo móvil.
17
Conexión automática
1. Seleccione
18
3. Oprima ffb50809
5. Regrese con
19
6. Oprima y después presione para visualizar los canales
activos.
20
b) Monitoreo manual
1. Seleccione
21
3. Cambie el nombre CAM 1 por DVR.
6. Regrese con
22
Puede capturar imágenes o grabar en tiempo real; esta información se
almacenará en la memoria interna de su dispositivo móvil.
Captura Reproducción
Conexión a una PC
1. Abra
23
4. En el navegador Explorer ingrese nuevamente a www.yunyis.com y
llene los campos:
24
5. Haga clic en Device login para que cargue nuevamente la página.
6. Dé clic en Permitir.
25
8. Seleccione algún canal y espere hasta que se visualice la imagen.
26
Especificaciones
Alimentación: 12 V - - - 2 A
Consumo: 7,5 W máx.
Consumo en espera: no aplica
Disco duro
Interfaz: SATA x 1
Capacidad Disco duro interno: 1TB
Capacidad soportada: Max. 2 TB
Disco duro externeo: 1TB
Interfaz externa
Interfaz USB: 2.0
Ethernet: RJ45 10/100 Mb
Control PTZ: RS485
Mouse
Alimentación: 5 V - - - 100 mA (x USB)
Convertidor de voltaje
Alimentación: 100-240 V~ 60/50 Hz 1 A
Salida: 12 V - - - 2 A
27
Producto: Grabador de video digital (DVR) de 8 canales, monitoreo
por internet, salida HDMI
Modelo: CCTV-948
Marca: Steren
PÓLIZA DE GARANTÍA
Esta póliza garantiza el producto por el término de un año en todas sus partes, mano de
obra, contra cualquier defecto de fabricación y funcionamiento a partir de la fecha de entre-
ga.
CONDICIONES
1.- Para hacer efectiva la garantía, presente esta póliza y el producto, en donde fue adquiri-
do o en Electrónica Steren S.A. de C.V.
2.- Electrónica Steren S.A de C.V. se compromete a reparar el producto en caso de estar
defectuoso sin ningún cargo al consumidor. Los gastos de transportación serán cubiertos
por el proveedor.
3.- El tiempo de reparación en ningún caso será mayor a 30 días, contados a partir de la
recepción del producto en cualquiera de los sitios donde pueda hacerse efectiva la garantía.
4.- El lugar donde puede adquirir partes, componentes, consumibles y accesorios, así como
hacer válida esta garantía es en cualquiera de las direcciones mencionadas posteriormente.
El consumidor podrá solicitar que se haga efectiva la garantía ante la propia casa comercial
donde adquirió el producto. Si la presente garantía se extraviara, el consumidor puede recur-
rir a su proveedor para que le expida otra póliza, previa presentación de la nota de compra
o factura respectiva.
28
QUICK GUIDE
QUICK GUIDE
V0.0 0915
29
Content
DVR
Mouse Power
adapter
Quick Installation
guide CD
30
Parts
Front panel
1. Navigation buttons
2. Confirm
3. Play
4. Exit
5. In Use indicators
a) Power on
b) Hard disk
c) Record
6. IR LED
5 3 1
d6 a b c 4 2
Rear panel
VIN7 VIN5
VIN8 VIN6
RS-485
31
Before installation
• Install the equipment in a secure place and if is possible, locked to
avoid any bad use or theft.
• Choose a stable and ventilated place; away from heat sources (heating,
fireplaces, kitchens) or vibes.
• Consider the enough space to place the device and the wires of the
camera.
• Connect the device to a no break to protect it from an electric shock in
order to keep working in case of an outage.
• Avoid to connect it to a multicontact, others devices connected may
cause current variations.
• It’s recommendable that install it close from a router or modem.
• Review regularly the correct functions of the camera and the available
memory in the hard disk.
Monitor
Multiple power source for
cameras or power
adapter per camera
Router
Transceivers
32
Connections
a) Cameras connections
Connect the cameras into the corresponding ports, as shown in the next
images. You can connect 8 digital cameras or 8 analogic cameras max.
D D
D A
2
4 5
33
Use a 12V power supply or a power adapter per camera.
Consider the power consumption of each camera to not overload the
permitted charge.
b) Mouse connection
34
Connection diagram
35
Configuration
After to connect the device, the transmitted images by the connected
cameras should displayed in the screen. Enable the Cloud Services
Enable box and then click Next, as show in the next
image:
36
Click with the right button of the mouse in any area of the screen and
choose the Main Menu option.
User: admin
Password: 123456
In case to enter 5 times wrong password, the device emits a alarm and
will block it. You can enter password again after 30 min.
37
2. Click OK.
38
2. Then, click in General.
3. In the System time window change the date and the hour. Save the
changes clicking into Save.
39
4. Select the desired language and click in App.
40
6. Once that the device, click Next and OK, as shown in the next images:
41
Recording
The device is configured to record in all channels, automatically.
1.- To disable some channel, click right button and choose the
Video control option.
3.- Choose the channel that you want to disable in the close option. Con-
firm with OK.
42
Playback
1. Enter to Video consulting option
2. Select the channel and with playback keys control the recorded file.
43
Remote monitoring (smartphone, iphone and
tablet)
1. Enter to Main menu and click in Network configuration.
44
3. Download the N-eye app in Play Store or App Store and install it into
your mobile device.
4. Open the app from your device and choose some of 2 connection
modes: Automatic or Manual.
The submitted images are from an Android device and only is for referen-
ce. The sequence and configuration of the menus may vary in accordan-
ce with the app version and the mobile device OS (Android/iOS).
45
Automatic connection
Make sure that the DVR and the mobile device are connected to
the same network.
1. Select
46
3. Click ffb50809
5. Return with
47
6. Click to visualize the active channels.
48
b) Manual monitoring
1. Select
49
3. Change the name CAM 1 by DVR.
6. Return with
50
You can capture images or record in real time; this info will saved in the
internal memory of your mobile.
Capture Playback
Connecting with a PC
1. Open
51
4. In the Explorer browser enter again to www.yunyis.com and comple-
te the fields:
52
5. Click in Device login to load the page again.
6. Click in Permit.
53
8. Select some channel and wait until that the image visualize.
54
Specifications
Input: 12 V - - - 2 A
Consumption: 7.5 W max.
Stand-by power consumption: not applicable
AV input
Video compression: H.264
Video input: 8 channels
Video input interface: BNC
Audio input: 8 channels
Audio input interface: RCA
AV output
Screen: VGA: 1280x1024
HDMI: 1024x768, 1280x720, 1920 x 1080
Resolution: Main stream 720p/(D1)
Secundary stream: D1(12)/CIF/QCIF
Video output: VGA and HDMI channels
Audio output: 1 channel, RCA
HDD
Interface: SATA x 1
Internal HDD capacity: 1TB
Supported capacity: Max. 2 TB
External HDD 1TB
External interface
USB interface: 2.0
Ethernet: RJ45 10/100 Mb
PTZ control: RS485
Mouse
Input: 5 V - - - 100 mA (x USB)
Power converter
Input: 100-240 V~ 60/50 Hz 1 A
Output: 12 V - - - 2 A
55
Product: Digital / analog 8 channel DVR
Part number: CCTV-948
Brand: Steren
WARRANTY
CONDITIONS
1. This warranty card with all the required information, invoice, product box or
package, and product, must be presented when warranty service is required.
2. If the product is in the warranty time, the company will repair it free of
charge.
3. The repairing time will not exceed 30 natural days, from the day the claim
was received.
4. Steren sell parts, components, consumables and accessories to custom-
er, as well as warranty service, at any of the addresses mentioned later.
a) The consumer can also claim the warranty service in the purchase
establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or
purchase ticket.
RETAILER INFORMATION
Name of the retailer
Address In case your product fails
or have questions, please
Product contact your nearest dealer. If
Brand you are in Mexico, please call
to our Call Center.
Part number
Serial number 01 800 500 9000
Date of delivery
56
Este instructivo puede mejorar con
su ayuda, llámenos al:
Help us to improve this instruction manual,
call us to:
01 800 500 9000
Centro de servicio a clientes
Customer Service Center
57