Documente Academic
Documente Profesional
Documente Cultură
Skip to footer
PokemonCoders
Home
Polls
Emulators
How To
Beginner’s Guide
Games
Cheats
Charts
search
Home » Cheats » Pokemon Emerald Cheats – Emerald Gameshark Codes for GBA
Welcome to the world of Pokemon Emerald, like me, I also enjoyed playing the game. But to make it
more fun, it would be the best to tweak the game a little bit using Pokemon Emerald cheats.
In Pokemon gaming, there are several known and favorite cheats used by gamers; the Walk Through
Walls, Rare Candy, Master ball, wild Pokemon modifier, and Legendary. In this listing of cheat codes for
Pokemon Emerald, You are about to uncover the most popularly used cheat codes and more of them.
These Gameshark codes will work only for Pokemon Emerald version with Gameboy Advance supported
emulators. Pokemon Emerald gamers already verified almost all of these codes; however, it may not
work for you when you fail to follow the instructions in applying such cheat codes like entering the
master codes.
But if you think you already did what is asked in the instructions, feel free to post your comments with
your questions and issues, including the information of the cheat you want to activate in this game.
The most awaited cheat has finally here. The Pokemon Nature modifier cheat is one of the most
requested cheats by our readers. A Pokemon’s nature plays a vital role in raising stronger and fiercer
Pokemon, and when used correctly, it makes a huge difference.
To savor the benefits of Pokemon nature, checking our Pokemon Nature Chart is highly recommended.
Using the chart, you’ll be guided on what stats to improve according to your Pokemon’s nature.
If you’re using My Boy free version, all multiple liner cheats will not work for you. My Boy requires the
paid version for you to activate multiple-liner cheats.
But there’s an easy trick to bypass this limitation – Enter the lines of codes as a separate cheat. Sounds
complicated? It’s not, and I created a guide on how you can do it, check How To Enable Multiple-Liner
Cheat Codes on My Boy Free Version. I also created this Youtube video for you to see the tutorial in
action.
Catch Other Trainer's Pokemon (Cheat type: GameShark v3/Action Replay)
There are plenty of reasons why a cheat fails to work; here is the list of fixes you can apply to address
them.
Double check the cheat, remove spaces at the end of the code if there’s any.
As much as possible use Emerald V1.0 as this version works best for cheats compared to V1.1
Cheats not working on GBA4iOS? This is a common problem for most GBA4iOS users, and sadly there’s
no real fix for this problem yet.
Select the correct cheat type, some emulators such as My Boy for Android can detect the right cheat
type, and it is highly recommended using this app.
Listed above are the fixes to common cheating problems. If none of the listed solutions solved the issue,
you can view more troubleshooting information here or watch this video guide.
Share
394
Tweet
Share
Pin
394SHARES
Poll: Vote For The Best Pokemon ROM Hacks for 2019
Pokemon AshGray
Pokemon Clover
Pokemon CrystalDust
Pokemon Cyan
Pokemon Eclipse
Pokemon Fuligin
Pokemon Gaia V3
Pokemon Glazed
Pokemon Outlaw
Pokemon Platinum Red & Blue
Pokemon Prism
Pokemon Rusty
Pokemon Snakewood
Pokemon Unbound
Pokemon Vega
Pokemon CAWPS
View Results
Previous Post:
GameShark Code Not Working FixHow to Fix Not Working and Glitchy Cheats for Pokemon GBA Games
Next Post:
Reader Interactions
Comments
Anon
So I used the wild pokemon modifier cheat and it worked swell. Kinda wish I didn’t have to re enter the
cheat if I failed to catch a pokemon or if there was a 100% catch rate cheat but fine. I can work with
that.
Thing is, I turned on real time clock so I can finish Shoal Cave and it stopped working after that, even
when I turned it back off again.
Reply
Anon
In the process of trying everything under the sun though now all my item counts start with a ?. If there’s
any idea how to revert that I’d appreciate it.
Reply
Johnathan
October 22, 2019 at 1:36 AM
This means you have to high of an amount for it to fit. At least I think.
Reply
Anonymous
I used the masterball cheat, but when I turned it off all the slots in the shops were still masterballs. Plz
help!
Reply
PokemonCoders
After turning off the cheat, save your game and restart. This method works of the time.
Reply
depressedtrash
IS THERE A CHEAT TO REGAIN HP OR NOT GET DIE IN THE BATTLE? THANKS IN ADVANCE
Reply
Laquatus
September 17, 2019 at 11:05 PM
is there a gameshark code for max ev/iv that a pokemon can get as if was farming it naturally and not
999 stats?
Reply
Jacob
E25F4B56 B9166862
only use it with a wild pokemon modifier cheat though or it will crash your game
Reply
Urhead1o1
Do you have a cheat that we could choose the nature of our starter pokemon?
Reply
PokemonCoders
Hello Urhead1o1, I haven’t heard a cheat like that before and I doubt that kind of cheat exist, sorry.
Reply
Power House
September 6, 2019 at 11:36 AM
The wild pokemon sqawn works but they are uncatchable even with hp around 1-6 can it be fixed or
would master ball cheat will counter this
Reply
Seththewolf564
It will
Reply
Keith
Does the nature cheats apply to wild Pokemon, I’m trying to get a shiny adamant torchic and it never
seems to be adament
Reply
PokemonCoders
I haven’t tried this before, but I doubt combining shiny and nature cheat will work.
Reply
Anonymous
October 12, 2019 at 8:34 AM
I keep catching the Same nature that I don’t want when trying to mix the two as well. (Shiny + nature)
Reply
PokemonCoders
If you can’t find your desired Pokemon nature, restart your game (leaving the shiny code enabled) and
walk on wild and repeat the process. I don’t think enabling nature + shiny code will work.
Reply
Anonymous
i use wild pokemon modifier but it didnt work what should i do?
Reply
PokemonCoders
Check previous answers, I already provided the solution to this kind of problem. But in your case, I
suspect that it has to do with your Rom version or your Emulator.
Reply
Ted K Baker
August 18, 2019 at 1:25 PM
Do the nature cheats apply to wild Pokemon, I’ve tried to get an adamant shiny torchic and it’s always
calm or timid
Reply
Honnigo
Reply
Hannah
The pokemon modifier code won’t work I’ve got everything I need I’ve done everything right and
nothing happened HELP
Reply
PokemonCoders
Hi there Hannah, You may want to check my previews answers related to your question below.
Reply
Hannah
August 16, 2019 at 7:42 AM
Reply
PokemonCoders
Reply
Hannah
Never mind
Hannah
Hannah
I don’t know
Anonymous
Reply
PokemonCoders
Hi, scroll down below to see my answers regarding your question or you may check our beginner’s guide
section.
Reply
None
Reply
Mehtab alam
Reply
Mad Din
Why my pokemon didn’t evolve when i use the infinite exp cheat ?
Reply
Jade
Some pokemon need to have a high friendship level before evolving, some require a stone, and some
need to be traded to evolve
Reply
UltraGods
Reply
PokemonCoders. does the TM and HM cheat work on John GBA Lite? I have been trying to use the cheat
but it doesn’t seem to be working.
Reply
PokemonCoders
Hey there pal, most likely it will work but be sure you have the v1.0 rom and not the v1.1.
Reply
Diana Lamb
Hey, i caught a Mew using the legendary cheat but it will not obey any commands. I also caught
mewtwo the same way and mewtwo does obey. I also ended up with a “bad egg???” Sorry im new to
this.
Reply
PokemonCoders
Mewtwo does obey but mew does not. Before capturing the Pokemon try to disable the cheat, I guess
this can help you get rid of bad eggs.
Reply
Pidgeon
Reply
tax
sorry to hijack, i’m on mobile and can’t find the new comment section. does the shiny cheat code force
all pokémon to be male or am i just really unlucky when trying to catch female pokémon?
Reply
PokemonCoders
Just scroll down to the bottom to find the comment form, anyway, I just replied to your questions check
it.
Reply
tax
i can’t tell if my last comment went through or not. sorry for any duplicates. i was just wondering if the
shiny code forces the pokémon to be male. thanks!
Reply
PokemonCoders
Hi there, restart your game without turning off the cheat and see if it changes the Pokemon gender, this
works most of the time so I guess this will work for you.
Reply
tax
nah it doesn’t seem to be working. do you any other suggestions by any chance? thanks 🙂
Reply
PokemonCoders
Sorry tax but that’s the only solution I know to fix this problem, hope someone could give us more tips
to fix the problem.
Anonymous
thank. you
Reply
Camilla
Trying the Shiny Cheat on (yea im a weeb) Moemon Emerald Randomizer, and was wondering why the
Shiny Cheat Doesnt work? is it cuz its a Randomizer? or is it just cuz its Moemon? *~*
Lei
October 1, 2019 at 5:38 AM
Reply
PokemonCoders
Most of the codes listed above will work on GBA4iOS except the Pokemon modifier. If you’re new to
cheats you can head on Youtube for tutorials.
Derpy orange
Hi there I need help trying to find legendary Pokémon in the wild, I put the code in but when I go in the
grass it makes me restart my game
Reply
Cocoa
maybe your emulator isn’t compatible, try to download other gba emulator or put the different type of
code (gameshark/gamesharkv3 action replay)
Reply
Croxx
September 12, 2019 at 5:25 AM
Reply
PokemonCoders
Some of my readers have reported that it is possible to change the gender of a Pokemon just by
restarting the game. I’m not quite sure how many restarts needed but give it a try and I would love to
hear your results about it.
Reply
AngeloTew
I’m on GBA4iOS and when i use cheatcodes for POKéMON fire red version there were extra MASTER
CODES for GBA4iOS users, letting me catch pokemon i choose with cheatcodes. In this page i dont see
an extra master code for GBA4iOS, But i ignored thinking that it would be okay, but it didnt, as soon as i
wanted to see Rayquaza, I captured him but suddenly the game restarted to the very beginning, Can you
add the other master code for GBA4iOS please?
Reply
PokemonCoders
You may be talking about this master code, can please tell us if the cheat works or not after adding the
master code?
B749822B CE9BFAC1
A86CDBA5 19BA49B3
Reply
AngeloTew
No it doesn’t . i followed the instructions. what i meant was the Extra Master Code for Pokemon
Emerald for GBA4iOS users so the cheat works.
Reply
PokemonCoders
Hi there AngeloTew, thanks for letting us know about this. I’ve never heard of that extra master code for
Pokemon emerald before. If someone could give us the code, it would be so much appreciated. It’s not
my first time hearing this issue with GBA4iOS, but hopefully, that extra code will be the fix.
Reply
Anonymous
Same
Reply
Joel
Reply
Pickle me elmo
How
Reply
Dabber
Reply
Kaymali
Hello.
I’m using the Pokemon Emerald Rom from 1986 – pokemon emerald (u)(trashman) and I can’t seem to
get the TM cheat to work. Is my ROM at fault here? I did read that you need a v.1 but I’m not sure if
mine is.
Reply
PokemonCoders
July 8, 2019 at 12:15 PM
I’m not quite sure which emerald version you have but may I know your GBA emulator? The cheat works
best for cheat supported emulators such as My Boy and VBA.
Reply
Cody Turner
The nature modifier codes don’t seem to be working for me. I’m running My Boy! Current. I activate it
before walking into tall grass and they don’t seem to have the nature I’m looking for. Tested on several
nature’s and none work. Could I get more details on the parameters for this code?
Reply
PokemonCoders
Hi there Cody, make it sure your emerald version is V1.0 and not the v1.1. The v1.0 works well with
cheats.
Reply
Anonymous
Reply
PokemonCoders
Hi there, try this code 9287036A 8457D13C and let me know if this works for you.
Reply
Shidi
Reply
Amal
Can I have a download link to get emerald 1.0 because I’m currently using 1.1
Reply
Cj
I’ve been trying to use the nature modifier all day but it doesn’t seem to work at all. Is there a master
code for it or could I get more details on its conditions? I run it on My Boy! I activate it before I run into a
patch of grass
Reply
PokemonCoders
Reply
Liam
Whenever i put in the code for hm’s and tm’s it always comes up with “Warning: codes seem to be for a
different game. code might not work correctly.” I then go to make sure it hasnt worked and it doesnt. If
you could provide a fix it would be very much apreciated
Reply
PokemonCoders
You can simply ignore that error. After activating the cheat go to Pokemart and purchase the first item
listed in the buy list. If still doesn’t work, check your rom version the cheats works best for V1.0 and not
for V1.1.
Reply
Liam
PokemonCoders
Reply
Cj
I’ve been trying to use the nature modifier all day but it doesn’t seem to work at all. Is there a master
code for it or could I get more details on its conditions?
diogo
Reply
PokemonCoders
Hello Diogo, kindly check my previous answers, this question had been asked and answered many times
already.
Reply
Chunkykid
Are there any cheats to get held items such as twisted spoons or bright powder in emerald?
Reply
PokemonCoders
Hi there Chunkykid, thanks for dropping here. So far, we don’t have a code for those items yet, but we
are continuously searching for working codes for every Pokemon games. Give a few days to add the
code, stay tuned.
Update: We’ve just added the codes for hold items, see Hold items section above, check em out.
Reply
TheICTLiker4
The code 82005274 0YYY is much more versatile than you think. The X’s correspond to a hexadecimal
code point, e.g. 0DF stands for Metal Powder and 178 stands for Old Sea Map. For example, type
82005274 00C5, and you can buy Lucky Eggs, which are available in FR/LG (5% chance to be held by wild
Chansey), but unavailable in R/S/E.
Reply
Joe
June 7, 2019 at 9:34 AM
Hey I’m playing Emerald on GBA4IOS and I want to use the Wild pokemon modifier. I know its typed in
right but it wont work for me. I had this problem for the Fire Red version of the cheat. Other than this
one, the rare candy and master ball cheat work fine.
Reply
PokemonCoders
Hey there Joe, since you are using GBA4iOs, just want you to know that everyone who uses the
emulator experience the same situation as yours. For now, there’s no concrete solution but let’s hope
it’ll be fixed in the future.
Reply
Tanjorel
Hey pokemoncoders, when I used the berries cheat it doesn’t work, even with the right cheat type and
code, can you fix this
Reply
PokemonCoders
Hi there Tanjorel, I hope you followed the instructions carefully. After activating the cheat go to
Pokemart and purchase the first item in the buy list. The first item will be the berry of your choice.
Reply
Anonymous
Will these cheat codes work for John GBA lite version?
PokemonCoders
Jhon
Reply
Peppa Pig
I have found the way to solve the cheating codes in GBA4iOS successfully (iPhone XS, iOS 12.2), after
trying different things:
1. Be sure that all the lines of the code are included (may be dumb, but at the beginning I was using only
two strings instead of the whole code because I thought they were several codes doing the same).
2. Include and enable the MASTER CODE, which I did not find in this post but in linked posts).
3. Include and enable the code of interest (female pokemons, infinite money, shiny pokemon), but erase
all the ones you are not using (except the master code).
I observed that multiple codes at the same time, even if not enable, make the enabled codes not work.
Extra Observations: bad eggs can appear in the team; also the Code Breaker codes work without all this
steps, in my case.
Reply
Peppa
Reply
Anonymous
Hi question when i use the shiny cheat all the wild pokemon become female even with the gender cheat
any reasons why?
Reply
PokemonCoders
May 22, 2019 at 7:25 PM
You can’t pair the gender cheat with the shiny cheat. Unfortunately, the only fix we found to change the
gender of a shiny Pokemon is to restart the game.
Reply
Ron-san
Reply
PokemonCoders
I have just added the cheat for various items, check “Msc items” section.
Reply
Daniel
When I use the shiny cheat the names get gliched out why
Reply
PokemonCoders
May 10, 2019 at 7:56 AM
It means your rom version is not compatible with the cheat. There are three choices for you to choose in
your situation; not using the cheat anymore, look for Emerald V1.0 or stay the glitchy shiny Pokemon as
it is.
Update: There’s a possible fix for this glitchy Pokemon name problem. All you have to do is disable the
cheat before catching the Pokemon.
Reply
Anonymous
Reply
PokemonCoders
Reply
jotch
Aceseiei
Actually all you have to do is disable the cheat before you catch it
Reply
PokemonCoders
Reply
Anonymous
PokemonCoders
Tanjorel
Hey pokemon coders, I had a problem in the first pokemon Max stats, when I put the cheats and cheat
type and it always says “cheat invalid”, can you tell me how to fix it
Reply
PokemonCoders
Hello, kindly the end part of the post I have posted there the possible fixes to common cheating
problems.
Anonymous
Hi right now I’m playing Pokémon emerald and have used a rare candy cheat code, but there has been a
glitch in the game I received a bad egg in my team and don’t know what to do with it I have tried to put
it in the pc, but it comes back can you help me
Reply
PokemonCoders
Reply
Dustin
My lileep turned into a bad egg while it was in my PC randomly, BEFORE I used any cheats, do y’all know
why? After all, lileep cannot be replaced since it comes from one of the 2 fossils.
Cleo
Doesn’t seem working when I go to the grass and off shiny cheat it doesn’t show the Pokemon I cheat
Brett
Do you have a pokerus cheat or do you know where I can find one? I’ve searched all over and can’t find
one.
Reply
Anonymous
Reply
Raul
I tried using the rare candy cheat and it’s not working I’m using my boy but still nothing can someone
help please
Reply
Daniel
Reply
PokemonCoders
Wow! that must be awesome. Thanks for letting us know, this information surely a huge help to other
players.
Reply
Parker
Reply
Joshua
If you turn the shiny cheat on and then turn it off before catching your chosen Pokémon, the name
won’t glitch.
Reply
Anonymous
Reply
PokemonCoders
Reply
Diana Lamb
PokemonCoders
Mew normally won’t obey in the game and I never heard a cheat before to make it obey, sorry.
Boomshakalaka
Do these cheats not work with GBA4IOS? I recall them working earlier on in the programs development
but now they do not.
Reply
PokemonCoders
Hi there, for some reasons some cheats don’t work for GBA4IOS now.
Reply
zander
Reply
X0Z
Ehm. Sorry, I just use your infinite exp, but it doesn’t work, could you tell me how to make the cheat
works thanks.
Reply
PokemonCoders
After adding a cheat battle any Pokemon in the wild, you will receive lots of exp using the code and your
Pokemon will level up many times. To stop, you have to disable the cheat in the cheats menu manually.
Reply
unCERN
You can’t have any other cheat active when using the infinite exp code. Codebreaker loses priority over
other cheat types like game shark/action replay.
Also don’t hit any buttons and hope your selected Pokémon is faster, as the cheat leads to an instant KO
for whoever goes first, even the opponent.
Reply
Anonymous
Reply
ShadowGamer
hi im playing right now with the shiny cheat and the pokemon only are only female is there a fix?
Reply
PokemonCoders
Sorry but there’s no fix for this bug for Shiny cheat.
Reply
SesWin
Reply
Kith
Hi im using latest version of my boy but i can’t use the tm and hm code even tho im doing the steps right
pls help
Reply
PokemonCoders
Reply
Anonymous
I can’t seem to get TM & HM cheat to work. When I try to follow the instructions it just pops up as a
bunch of ?’s.
Reply
PokemonCoders
Be sure to turn off all other unused cheats, or check article for more fixing guide.
Reply
Shadwesker
Hello, I’m trying the pokemon modifier cheat but the screen turns red when I use it and don’t get what I
want to spawn all other cheats are working thanks to you detailed guide but I want to collect them all so
I’m asking.
Reply
PokemonCoders
Hello Shadwesker, when activating the Pokemon modifier code, you must activate only the cheat that
you need. All other unused cheats must be turned off. When your screen turns red most probably there
are other enabled codes beside the modifier code.
Reply
Elijah
Fix it.
Reply
PokemonCoders
May I know which GBA emulator are you using to play emerald?
Reply
Anonymous
Azure345
If i use the shiny cheat, will the stats of pokemon change so it look legit too?
Reply
PokemonCoders
I guess the stats will change, but I want to let you know that the shiny cheat will give you the same
gender and same nature depending on the emerald version you are using. As far as I know, it is not
suitable for breeding so be careful when using the cheat.
Reply
Demonic
your cheats are working but u need to change the teleport cheat
Reply
PokemonCoders
Thanks mate, I agree some of the teleport codes are buggy, I haven’t done updating them, so I leave it
as it is.
Reply
dum boi
Hey, so all the cheats work for me but the Any Pokemon Cheat. I’m playing on MGBA for PC. I tried
everything I could think of but nothing would work. Can anyone help me on this? I have the Master Code
on as well. I typed in the Pokemon code needed and then the specific Pokemon’s code right before the
Pokemon code.
Reply
Anonymous
Disable all the cheats including the master code, i tried it and boom right away it worked
Reply
Dameon
Hey! Im using my boy version 1.8.0 and im running emerald (u) (2).zip and so far the only cheat I can get
to work is the rare candy one! Any advice?!
Ps: im really trying to get blazed glazed to work but it wont… iv tried every patcher I can find and ever
version of the roms and emulators that I can get my hands on but absolutely no luck… if you have any
advice for that too that would be great
Reply
PokemonCoders
It seems like you’re running an Emerald V1.1, this version does not support most of the listed cheats.
Look for emerald V1.0 as this version works well with cheats. Regarding the blazed glazed, I suggest
downloading a pre-patched version of the game, that’s the only suggestion I give.
Reply
Elijah
PokemonCoders
Reply
PokemonCoders
Reply
Sinh
When I used emerald code to catch kyogrem in Pokemon victory fire , I encounter an zekrom. Very
Funny
Reply
PokemonCoders
Reply
Misha
When I use the Navel Rock Warp Code and flew to it with my latias. It only got me into an infinite area of
water whenever I move around my character is only in the middle and never goes out of the water. The
other cheats worked well. Idk about the navel one. Can you please tell me whats wrong?
Reply
PokemonCoders
Hi Misha, maybe you have just reached the end part of the map, or just you’re trapped in the area, I
believe you can use the walk through walls cheat to escape that place. The warp is not 100% perfect, so
you can’t expect too much using it.
Reply
Xenon
Reply
Anonymous
Reply
PokemonCoders
Have you tried switching to My Boy? I rarely use John GBA lite especially when playing with cheats.
Reply
ScummyMudkips
(Adamant Beldum)
But when I use the shiny encounter code the beldums keep coming out bold nature with always a
random character name.
Reply
PokemonCoders
Shiny cheat is a buggy cheat, try restarting your game and if the problem still persist do not use it.
Reply
Danny Lee
Reply
PokemonCoders
Kofi
Can I use the wild Pokemon Modifier cheat on my Samsung s9? I have the paid version. If so how?
Reply
PokemonCoders
If you have the paid My Boy then 100% yes, the wild Pokemon modifier cheat will work. But as long as
you have V1.0 emerald rom version.
Reply
Lachlan
For some weird reason every time I try to use the legendary thing it keeps crashing my game restarting
everything. Is there a fix or something I could try?
Reply
PokemonCoders
Enable only the legendary cheat and disable all other unused cheats. Yeah happens when there are too
many cheats are enabled, if it doesn’t help try restarting your game.
Reply
Raishin
Reply
PokemonCoders
Hello Raishin thanks for posting your comment, I’m working on adding item cheat so stay tuned.
Reply
Jordan
I was wondering if there is a cheat so that I can aquire heart scales and if so can you please let me know
the code and how to get it to work
Reply
Nate
There’s an issue with Shiny Cheat, it works but it gives my pokemon a really weird name when I catch
them, is that supposed to happen?
Reply
PokemonCoders
That’s another issue with the shiny cheat, yes that supposed to happen to some rom versions. In your
case I suggest not using it.
Reply
Anonymous
Ive encountered this name issue aswell ,the name changer guy in slateport was my solution
Reply
PokemonCoders
Hi there, thanks for sharing this information. I actually haven’t tried this yet but I hope this really works
cuz this could be very useful.
Reply
Pokefan
If you guys want to fix the name bug with the shiny cheat, disable the cheat before you catch it.
Reply
PokemonCoders
I never tried this method before but I hope this will work.
Azure345
If youre playing on an android, maybe you can use Pokemanager Advance app. It lets you edit gba
pokemon save files.
Reply
PokemonCoders
If that’s an apk file and do not exist on Play store I don’t recommend downloading it. APK’s may contain
harmful files such as viruses.
Reply
Emeraldra9965
PokemonCoders
May 31, 2019 at 7:03 AM
Jai Jo
Reply
PokemonCoders
Yes, there is a cheat for all items but I don’t recommend using it and same as with the all pokeball cheat.
These cheats will just populate your bag with useless items and make it hard for you to find the item you
really need.
Reply
Anonymous
Luthor mendez
Sir? Goodafternoon.. I just want to ask? Why infinite money doesn’t work? I used emeral v.1 already.
Legendary pokemon.. I’ve already get them. But infinite money, not yet.. My money still 100$ sorry for
some grammars.. What should i do? I need your help and advice sir on how to use that code..
Reply
PokemonCoders
Hello Luthor, if the money doesn’t work try going in and out the Pokemart or any building for about 5
times, then check your money. If nothing happens use the rare candy cheat, grab as many rare candies
as you can and sell them for money. Rare candy is expensive so you can get a lot of money selling them.
Reply
Azure345
If it dont work, try usimg rare candy cheats,then take tons of rare candies. So you can sell them for tons
of money too. Thats my way to get moneys.
Reply
Dielan
March 15, 2019 at 6:02 AM
Just wanting to know if the shiny cheat makes all pokemon have your starters nature? I started it from
the beginning with the shiny cheat and everything has the mild nature.
Reply
PokemonCoders
That’s not possible if you’ll pair the nature cheat with shiny.
Reply
Ty
Do you know an easy catch cheat because it is hard to catch even a mudkip for some reason
Reply
PokemonCoders
I can’t find a working easy catch pokemon cheat but you can always use masterball by enabling the
masterball cheat as an alternative.
Reply
Anonymous
March 21, 2019 at 11:49 PM
When I use the shiny cheat for my iOS it gives me a red screen during the battles. The Pokémon are
shiny I just don’t get to see the battle sequence. How do I fix?
PokemonCoders
Shiny cheat is buggy and effect varier per emulator or device. I don’t recommend using it if you notice
irregularities.
Gingin
For the wild Pokemon modifier, does it work for ios gba emulator, I’ve tried but so far haven’t had any
luck? All the others did though
Reply
Warren
Do these cheats work for Pokémon emerald (trash man) I’ve been trying to use the Pokémon modifier
and it doesn’t work at all
Reply
Me
Reply
PokemonCoders
First off, be sure to have V1.0 rom, second, use recommended GBA emulator check best GBA emulator
for Android and Best GBA Emulators for PC. For Android I highly recommend My Boy and for PC I suggest
VBA. In your case, if the money doesn’t appear after going in and out the Pokemart at least 5x then I
suggest following the recommendation I mentioned.
Reply
kai yo
Reply
PokemonCoders
Reply
Bryan
March 12, 2019 at 2:52 PM
Hey your cheat is work on me. You doing a great job man, i apreciate it. Btw we know that there are a
lots of TM in pokemon Emerald and u only write some tm, can i get the other tm pls, like stun spore
maybe or anything thank you
PokemonCoders
Hi there Bryan, I’m happy to know that the listed codes worked out for you. Regarding the other TM
codes sorry but that’s all I got unless someone will share the cheat.
Doc
Reply
PokemonCoders
Hey Doc, thank you so much. I just tested your code and yes it’s perfectly working.
Reply
Azazel
Reply
PokemonCoders
Reply
Anonymous
Mender
Reply
PokemonCoders
Reply
Tanu Yorpen
Reply
PokemonCoders
Hi there, thanks for posting your comment Tanu, so far these are the cheat codes for Dark Rising we
currently have check it here.
Reply
Nagesh
PokemonCoders
Hello Nagesh, better check our Pokemon emerald cheats Youtube video to see it for yourself.
Justine
Why it doesn’t work for me even through I’m playing Pokèmon Emerald with no MODs but this is the
pokemon that doesn’t work for Anorith,Wynaut,Tropius,Clamperl,Huntail,Gorebyss,Absol,ETC. And I
cannot do a single thing and I dont know what to do please help me I really need those pokemon 🙂
Reply
ZTemplar
hi, will there be item cheat? like, other items besides Rare Candy and Master Ball. some items are pretty
useful but rare, like PP Ups
Reply
PokemonCoders
Hey there ZTemplar, check out “Msc Items” section for the item cheats.
Reply
Karan
The wild pokemon modifier cheat for latios and chimecho is not working…
Help
Reply
PokemonCoders
It does work for me without problems, you have to put the code correctly. Kindly read the instructions
how to use the cheat.
Reply
ASGAMING
Good
Reply
Anonymous
I have a question , when i use the shiny cheat , there are only male shiny pokemon appearing , can that
be fixed or Not ? Just asking 🙂
Reply
PokemonCoders
Unfortunately there’s no fix for this even when paired with gender modifier code, it was really exciting
though if that’s possible but it’s not. 🙂
Reply
Denied
Is there a code for all berries? After the ev resetting berries even a item code with the respected codes
to buy them at a pokemart
Reply
PokemonCoders
Reply
NuclearRage99
I’ve a problem… I cant off shiny cheat bc it disapear from list. Can it be repaired?
Reply
Anonymous
While searching for a shiny vulpix both male and female came up but while looking for shiny shuppet
only male appeared. Had to search the comments to see if this was a problem because I still managed to
get multiple genders for vulpix
Reply
PokemonCoders
Hi there, wow! really? That’s my first time hearing such situation. Honestly I don’t have any idea why
both male and female shiny vulpix came up, maybe you’re just lucky? Try restarting your game and
search for shiny vulpix and see if that happens again, I would like to know. Thanks for dropping your
comment mate.
Reply
Does it matter
Just caught female shiny milotic now I know it wasn’t a messup because I didn’t use the gender change
on it at all so I’m trying to figure out it’s quirks more info to come you guys ( specifically for you to use
Pokecoder)
PokemonCoders
Good to know that pal, keep those information coming. Also, as far as I know, it’s not a good idea to
breed those shiny Pokemon caught from cheating.
POK'EGAMA
Reply
PokemonCoders
Dom
My normal pokemon cheat will not work its a invalid code or it crashes my game and I have to restart it
over I use my boy paid version I just want a Gyarados.
Reply
PokemonCoders
Are you sure you entered the codes correctly? Kindly check instructions on how to enter the cheat.
Timothy Mings
Reply
Gelo
Its working for My boy Thank you i have a mew now and a mewtwo
Reply
PokemonCoders
Oh wow! I’m glad the cheats worked out for you Gelo. Have fun!
Reply
Anonymous
Reply
PokemonCoders
MKII
Reply
PokemonCoders
I don’t recommend enabling the all berries code, it’ll just ruin your bag. I suggest enabling individual
berry code. See berries section above for the codes.
Beau
I used the master ball cheat and now I can’t hold any tms because my bag is full is there an unlimited
bag cheat
Mantel
Reply
Twinmill4
Hey when i used the shiny cheat all the pokemon i caught were named really weird and always at a quiet
nature…help?
Reply
PokemonCoders
Actually that’s the disadvantage of the shiny cheat and we can’t do anything about it.
Reply
Anonymous
I don’t know about emerald, but when I used a shiny cheat in FireRed, if you turned the cheat off before
you got to the nickname screen it wouldn’t screw up the name. Never checked nature, so not sure on
that.
Reply
Salohcin Htes
Why does the Pokemon Cheat Codes doesn’t work? Please help me! 🙂🙂🙂
Reply
PokemonCoders
Reply
Salohcin Htes
Nope… Actually my Brother help me. Thank for asking anyway! 🙂 Oh, and by the way…Is there a Cheat
that your Pokemon could surf to lava?
Reply
PokemonCoders
Good to know that pal. Nope, haven’t heard that cheat before.
Anonymous
Hi anyone
Reply
PokemonCoders
June 21, 2019 at 5:57 AM
Check Pokemoncoders Youtube channel to see the cheat in action. Basically, once the cheat is activated
it will give lots of exp after a battle.
Dielan
I started the game with the shiny cheat on….and all my pokemons natures are mild
Reply
Anonymous
Reply
MrDiz
I used Trashman’s Pokemon Emerald, disabled all cheats except the master Code and the modifier, and
it doesn’t work, any help?
Reply
PokemonCoders
January 31, 2019 at 7:06 AM
But how about your emulator which one do you use? I suggest using My Boy for Android or VBA for PC.
Reply
Nathan
Reply
Harris Z
Pokemon Coders, Can you add an cheat Infinite EXP to the cheat list, please cause im bored of training
Pokemon all the time
Reply
PokemonCoders
Hi there bro, I have no luck finding infinite exp cheat for this game. I found some codes but it didn’t
worked out for me. For now I would suggest using the rare candy cheat.
Reply
Anonymous
February 1, 2019 at 8:50 PM
hey bro?! Using rare candy for our pokemon does evolve our pokemon and also our levels but i am
worried that it does not gives us their powerful attacks
Reply
Anonymous
Hey um so I was trying to get a shiny charizard so I put on the shiny code and the charizard code but it
crashes every time
Reply
PokemonCoders
Hi, have you tried turning off all enabled cheats except the shiny code? Your situation happens usually
when too many cheats are activated at once. Let me know if this works for you.
Reply
Fran Lynch
Heyyyyyy when i use raiku cheat, the game send me to the starting screen, do you know why??
PokemonCoders
Hi Fran, try disabling all other cheats except the code for Raiku.
Reply
Anonymous
Reply
Harris Z
Hey there, can you add an cheat: Infinite EXP for Pokemon Emerald
Reply
Joel
Reply
PokemonCoders
Hi there Joel, try any of these codes and let me know how it goes to you.
Female:
7F06853C D823D089
0A694B5A 43A6964F
Male:
7F06853C D823D089
7980105E FC3721D0
Please note that this cheat will not change the gender of your current Pokemon. You have to go in wild
to encounter the Pokemon with your chosen gender.
Reply
Joel
ok thanks
Reply
Joel
Are You Done Testing The Gender Modifiers PokemonCoders? If Not Then Im Sad 🙂
Reply
Anonymous
Reply
xiantayco
hey Pokemon coder I have a compalin about the cheat(catch other trainers Pokemon) cheat it said on
instuctions that I should hold or press L+R before throwing a pokeball to avoid getting bad egg but it
worked but when I checked i had a bad egg🙂🙂🙂🙂🙂and it turnedostly all my.pokemon into bad egg please
reply🙂🙂🙂🙂🙂
Reply
PokemonCoders
Whoa, that’s insane, how’s that possible? As a rule of thumb do not save game progress if notice bad
egg in your party, so I hope you didn’t saved the game. Sorry for what happen and I would suggest not
using the cheat.
Reply
Anonymous
Reply
@g
Is there a solution on the chinese names when you catch a shiny pokemon? I tried giving them
nicknames but still chinese name
Reply
PokemonCoders
This is a bug of the shiny cheat, I suggest not using it, as I can see your rom version is not compatible
with the code or try to find another emerald version that works for this cheat such as US Emerald V1.0
or Emerald Trashman.
Reply
Anonymous
PokemonCoders
First off, may I know the GBA emulator to play the game? Try restarting the game several times while
the shiny code is enabled and see if this changes Pokemon gender. This works most of the time
according to some of my readers who tried it.
ASHY
UNLI PP
ED59169F CEB6
79BA7465 DC00
Reply
Anonymous
PokemonCoders
I guess you are referring to no random battle cheat? Kindly check it, using the cheat you will not
encounter battle in the wild.
Reply
Joel
Reply
PokemonCoders
Hello there Joel, sorry but I’m not familiar with Pokemon Jupiter Ruby but if the game is based on Ruby
rom then the regular Pokemon Ruby cheats should work for that game.
Reply
Joel
oh im sorry but is there gender modifers on pokemon emerald? i found one in pokemonn ruby cheats.
PokemonCoders
Actually there’s a code for Gender modifier but I haven’t tested it yet. I’ll post the code here as soon as
I’m done testing them.
Joel
PokemonCoders
Brandon
Hey poke, how does the nature modifier one work? I tried to use it on my starter Pokemon and didn’t
work. Does the pokemon need to be a wild one or a caught one?
PokemonCoders
Monte193
Hey does anyone know the item codes to buy whatever item you need from the poke mart? Ive found
some but the all say invalid code help please
Reply
Ash
Reply
PokemonCoders
Check the Wild Pokemon level modifier for the level 100 Pokemon.
Reply
Manish
Reply
DuckyMaster7
Reply
Snobber
I couldn’t get the rare candy cheat to work but everything else I tried worked.
Reply
Tobi
Hello, I’m having trouble getting the legendary Pokemon code to work, can you please help me, thank
you
Reply
PokemonCoders
Reply
Maleficus
Can you please send me a 1.0 version by e-mail? I can’t find it anywhere!
Reply
PokemonCoders
Sorry Maleficus but I can’t do it. It’s not legal to share GBA rom files, you can find it elsewhere maybe a
friend who has V1.0 or the Trashman version.
Reply
Maleficus
I found some version and the legendary poke cheat works there. Does this indicate that it’s 1.0?
PokemonCoders
Yep, most likely it is 1.0 as most cheats especially the legendary or wild Pokemon modifier will work only
for V1.0 and not for V1.1.
Joel
PokemonCoders Did You Finish Gender Modifier? I Can Help If You Want To
PokemonCoders
I wasn’t able to test the gender modifier yet. I would gladly accept your help Joel and it’s so much
appreciated.
Joel
Im Sad 🙂 I Guess No Gender Modifiers Or If You Can’t Share Roms Files Then Romsmania Is Just The
Right Website With Roms… You Dont Have To Share The Links To Them And May I Have A Ups Or A Ips
File For The Hack Please Or I will Be Sad 🙂 And I Didnt Mean It
Joel
Reply
adel
November 30, 2018 at 1:47 AM
Reply
Anonymous
did you actually activate the master code and put the first code before putting the legendary code???
Reply
Someone
Why does metagross transform into a mewtwo, with all the move is sketch, except for the tm?
Reply
Robson
the level cheat won’t work with wally’s catching demo how i can fix that
Reply
Anonymous
Reply
Von
I’ve tried so many cheats even ones not from here, I’ve followed everything correctly and my cheats still
wont work!
Reply
PokemonCoders
Let me guess, you have emerald V1.1 right? If so, then you need V1.0 to make all these cheats to work.
Reply
Joel
Reply
PokemonCoders
Reply
Anonymous
Does anyone know a one line cheat for shiny pokemon for a My Boy Free emulator?
Reply
Anonymous
Use visualboy.
Reply
Ryter
Reply
Anonymous
Yeah it’s
B56nd5G dIc4Kpeni5
Reply
Anonymous
Hey sometimes the walk through walls cheat code stops working and i get sick in the middle of walls
Reply
PokemonCoders
That is usually the case because of the design by default. Just like imagine you can’t walk through the
edge of the screen in some areas because there is nothing there. In cases where you can’t pass through
walls, that’s also due to the coding so just find an alternate path.
Reply
David
An easy solution that I found was to just make sure that the cheat is on then close the game and open it
again.
Reply
Anonymous
Other thing, you can add a X infinite item on pc? if that is posible.
Reply
John
How about the cheat code for the max stats of the other pokemon?
Reply
Anonymous
you can just move your pokemon to the first of your party
Reply
Allen
Would love to try these but where is the master code? I don’t see it typed out anywhere.
Reply
PokemonCoders
July 26, 2018 at 3:39 PM
Hey there Allen, you may check my Youtube channel to see how I added the cheats. Just want you to
know that there are cheats that don’t need to have master codes activated.
Reply
Greg
So when doing the legendary pokemon cheat do I have to input the master code then the code for the
pokemon for it to work?
Reply
PokemonCoders
Yes that’s correct, also please note that master code and the Pokemon code should be added as
separate cheat.
Reply
Kei
Hey buddy, the code breaker type cheats work for me but the game shark action replay ones don’t, can
you help me out here? Thanks
Reply
PokemonCoders
July 4, 2018 at 2:50 PM
Hi there Kei, I’m here to help, but first may I know your Emulator?
Reply
Anonymous
Reply
Anonymous
Reply
PokemonCoders
Reply
Anonymous
July 11, 2018 at 8:57 PM
Reply
Anonymous
Reply
Garth
Hello,
I’m using GBA4iOS on iPhone. The master ball code works correctly but the wild Pokémon codes crash
the game. The Pokémon I choose will appear occasionally but will eventually crash while attempting to
catch. I was able to catch one, turn off the code, save, then reload the game and it does not crash.
Although any other Pokémon I try, the crashing continues. Any solution? I am entering in the master
code and activating then entering a separate code with the master and Pokémon.
Thank you
Reply
PokemonCoders
Reply
Jp
Is there anything I can do to get around that? I’m having the same issue…
Reply
Aaron
I’m having the same w problem too, is there a fix for this?
Reply
Ruben
Hey,
Are the Master code and the warp codes supposed to be input as separate codes or as one combined
code? I’m asking this because when I use my Codedevil device (which also uses gameshark/action replay
codes) it doesn’t work when I create a separate Master code. I’ve also tried the birth island warp which
did work, but the Navel rock and faraway island ones didn.t Any idea how to solve this? I’m using a
regular gameboy advance with a European version of Emerald (no emulator).
Hope you;re able to help me.
Reply
PokemonCoders
Hi there Ruben, the warp code should be inputted as one. Let’s say you want to warp to the player’s
house, you just have to enter the code 6266061B C8C9D80F as single cheat and enter to any doors/cave
to warp.
Reply
Ruben
Hi there,
I tried it again and this time the navel rock warp worked :). Guess I did something wrong somewhere.
gonna try faraway island after.
thanks!
Reply
PokemonCoders
Jacob
Is there a relicanth code for the wild pokemon modifier? If there is, I can’t find it.
PokemonCoders
There’s Relicanth in the list, the code is 74F229CD 33D699AD. I suppose you already how to use the
cheat?
Chris
Is there a free version of emulator that you can enter multiple lines of code on Android.
Reply
PokemonCoders
My Boy free is simply fine, just remove the lines of the codes to make it single line and it will work the
same as with the paid version.
Reply
Anonymous
June 5, 2018 at 7:49 PM
Reply
So I have a problem with when I try to do the wild pokemon cheat its always the normal wild pokemon,
not the ones Im trying to get.
Reply
Evan
Reply
PokemonCoders
Probably you guys have the emerald version 1.1 that’s why the cheat didn’t work. Emerald cheats works
best for Emerald V1.0. If you have V1.0 but still didn’t work, maybe you are using GBA4iOS? Sorry but in
most cases Pokemon encounter won’t work in GBA4iOS.
Anonymous
October 26, 2018 at 4:30 AM
How do you remove the lines of codes?…do you just put everything in one line?
Reply
PokemonCoders
In the latest version of My Boy for Android, removing the lines of codes doesn’t work anymore. An
alternative solution is putting each line of codes as a separate cheat. Here’s what I mean
https://www.youtube.com/watch?v=H88cmpQFW5A
Reply
Anonymous
Can someone please post a froakie cheat for emerald it’ll really help
Reply
PokemonCoders
You can’t find Frokie in the original Pokemon Emerald game unless you are using an Emerald based rom
hack. What rom hack are you playing?
Reply
Pokemon master
September 27, 2018 at 6:21 PM
My hack is legendary
Reply
Anonymous
Reply
Anonymous
Gen 6 bro
Reply
Floor
Hi Guys!
I’ve been trying to try the Pokémon modifier codes for some while now but they don’t seem to work.
Other codes that fit on my screen like the shiny/masterball/teleport work perfectly.
I really want to play with a team of selected Pokémons to make the game more interesting.
The code for Ivysaur for example, I think it will work when I try this:
Now it doesn’t fit on my screen, so the last part wil be like this:
7F67 3FA554EE
Reply
PokemonCoders
Hi there, switch to another app such as Bluestacks or Nox App player to emulate Android on your MAC
and then install My Boy in it. After thorough testing, I found out that OpenEmu doesn’t support Action
replay cheat type codes. That’s so unfortunate because OpenEmu is the best emulator for MAC but it
lacks support on cheats.
Reply
Martin
Reply
Anonymous
Reply
PokemonCoders
Did you use the all pokeball cheat? better stay away from that cheat and use the master ball cheat as an
alternative. It will just ruin your TM case. I included a warning message in it and I hope you didn’t save
your progress before applying the cheat. I’m thinking of removing it in my collection.
Reply
Anonymous
Hi, I have emerald V1.0 all codes work thanks a lot. I just have a problem with the shiny code. When I
catch a shiny pokemon and even when I rename it, the pokemon name is still something like “Tôî sé”. Do
you know a way to get the shiny pokemons with their real name ?
Reply
PokemonCoders
May 16, 2018 at 8:55 AM
Sorry pal but there’s no way to fix that glitchy name in your ROM. You have the v1.0 emerald but there’s
the other v1.0 version that works best for the code.
Reply
Galoth
Go to the name rater in Slateport. He will let you change its name. I had the same problem and solved it
with this method.
Reply
Pukemon
Cant get any rare candies in my pokemon center pc, i am using gba android, it seems to be valid, but I
just cant see the rare candies its empty.
Reply
jen
Reply
ash
April 28, 2018 at 1:31 PM
Reply
Anonymous
He the tm hm doesn’t work for me I’ve seen the other cheats & they have 16 digits but tm& hm have
just 12 would that be the problem?
Reply
JHVJUK
Hiya, I’m looking for a code to max out my IVs on all wild Pokémon. Do you have anything that works?
Nothing I’ve tried so far has done so. I’m playing a variety of emerald hacks on GBA4iOS.
I’ve just gone from playing cloud white where the ivs are shown as letter grades and know what a gulf
there is between those with 31 and those with none, especially at level 100. Also, the master code I’ve
used makes every item I have as well as my bank balance start with a question mark and I’m worried
how that might impact items in my bag going forward. Indeed, the last time I encountered this I ended
up losing items in my bag with no warning. Cheers for your time
Reply
PokemonCoders
Reply
Adrian Willaert
Reply
PokemonCoders
Hey there Adrian, sorry but till now we can’t find any working codes for IV’s. Let’s hope someone will
share the codes here.
Reply
Anonymous
Hey pokemon coders i wrote the code of master ball but when i went to the pokemart there is no
masterball there in the list could you plss help
Reply
PokemonCoders
No worries pal your English is perfectly fine. What’s the version of your Emerald rom? Unfortunately you
need a V1.0 or the Trashman version and not the V1.1 for it to work.
Reply
Anonymous
Im trying to get groudon but like everytime I catch him with the master Ball (cheat) it would go to the
main menu… what do I do???
Reply
PokemonCoders
Try disabling other cheats besides the groudon cheat, if nothing happens reset your rom and try again
Reply
Ryan Skaggs
I got the trash man version but the Pokémon modifiers still don’t work. It won’t show me the Pokémon I
want and it crashes when I run away or battle the unwanted Pokémon.
Reply
Anonymous
Code for Master Ball is 128898B6 EDA43037, don’t worry I tested it out myself and it worked. I’m a
Filipino too ^_^
Reply
symon
Reply
Anonymous
Reply
Anonymous
Reply
My mom
May 11, 2018 at 11:41 PM
Lol haha
Reply
Anonymous
I am using myboy for android and the wild pokemon modifier cheat does not seem to work for me
Reply
PokemonCoders
Thanks for stopping hear pal, it looks like you have Emerald (U) V1.1 which incompatible with the
cheats. You need a V1.0 for them to work.
Reply
GBA fan
I can get v1.1 but I’m having trouble getting 1.0 could you post a link
Reply
PokemonCoders
April 28, 2018 at 8:44 AM
Sorry but I’m not allowed to do it. I share v1.0 roms before but I decided to took down the download
pages and stop sharing rom files. I share only .ips/ups rom hack patch files but not the original
FR/LG,Ruby/Sapphire and Emerald rom files. Thank you for understanding.
Reply
Anonymous
Your cheats work all the time thanks for the wonderful cheats
Reply
PokemonCoders
You’re welcome buddy, you may also want to check our collection of Pokemon ROM hacks, check “GBA
ROMS” section.
Reply
Thisboi
THANKS for posting these useful cheats, i’ve tried them all, and all of them worked!
Reply
PokemonCoders
April 3, 2018 at 5:32 PM
Yeah these cheat works all the time as long as you have the right ROM version. Congratulations and
enjoy the cheats pal.
Reply
Cassie
Hey, I used the shiny code and it works but the name of the pokemon is all jumbled and every pokemon
I encounter (not legendary) is ALWAYS female, (nothing against it, I just want a male Treecko) I am using
a laptop if that information matters..
Reply
PokemonCoders
Hi Cassie, these issues could possibly happen to anyone and that’s the downsides when using cheats. To
be honest with you, we can do nothing about it.
Reply
Cassie
Reply
PokemonCoders
Reply
Jeff
Derrik Girardin
I found if you turn the cheat off then catch the pokemon it fixes it
Reply
jayvered
Reply
PokemonCoders
March 16, 2018 at 6:36 AM
Check my previous answers, this question has been repeated many times already.
Reply
jayvered
i used the code rare candy and used it then what happened next is my blaziken turned to egg. do you
know what to do about it? thanks.
Reply
PokemonCoders
Maybe your ROM version is compatible with the rare candy cheat. Sorry we can do nothing about it
unless you get the emerald V1.0
Reply
Daniel Whiddon
Hey I for some reason can’t get the infinite money cheat to work. Tried all the codes and nothing. I’m
using my boy for Android. Any suggestions?
Reply
PokemonCoders
March 16, 2018 at 6:39 AM
Are you using the free version of My Boy? If yes, then It will not work because the free version of My
Boy won’t accept multiple lines of cheat codes. But I guess editing the code to make it one line would fix
the problem.
Reply
jayvered
Even editing the codes don’t work. You really need to buy it first. I did it several times already.. 🙂
Reply
PokemonCoders
I totally understand your frustration pal, yes some codes don’t work even when edited. But I can assure
you, you won’t regret when you buy the paid version of My Boy.
Reply
Choi Dal Po
PokemonCoders
Choi Dal Po
i’ve new trick… cause infinite rare candy is working,, so we can sell rare candy but be carefull to
withdraw rare candy to ur bag, and sell em
i’ll more happy if this site have other item codes (y)
Anonymous
I used the Shiny cheat and It worked fine and well but I wanted to turn off the cheat and go back to the
non-shiny pokemon and instead got shiny still ;_;
Reply
PokemonCoders
If unchecking won’t disable the cheat, you need to save your game progress and restart the game.
Reply
Anonymous
ok
Reply
David
Im using openemu on the lastest version for my Macbook air, (early 2014 13-inch). I can get infinite
money and master balls but I can’t find out (I’ve looked everywhere) how to get pokemon encounters to
work, like, I want to be able to catch charmander, either the codes I put in are wrong, or what im doing
is wrong. But eh, i need some help getting my Emerald cheats working for pokemon encounters.
(Openemu)
Reply
PokemonCoders
Hi there David, I can feel you and that’s so frustrating. You can’t make the wild Pokemon modifier to
work because OpenEmu don’t support Action Replay v3 code which the required cheat type for wild
Pokemon Modifier. As what OpenEmu suggested, users can convert the action replay v3/v4 code to
GameShark using https://gamehacking.org/?sys=gba but I haven’t tried it personally.
Another solution is switching another emulator, I suggest installing Bluestacks and downloading My Boy
for Android. My Boy is the best GBA emulator I ever tried and it works best for many.
Reply
Ana
Hello, could you walk me to through using the code convertor? I’m trying to catch Deoxys but I’m using
OpenEmu.
Reply
PokemonCoders
Apologies but I haven’t used the code convertor, when I’m on my MacBook I use Bluestacks with MyBoy
installed to run Pokemon GBA games.
Reply
Hypershadichero
Reply
iiDupl1cate
Hey, I may need help. I do have the right version for the masterball cheat. I have tried it and it worked.
My game was corrupted so I made a new game. Now the masterball cheat is not working?? I checked
pokemart and did codebreaker and gameshark. Please help.
Reply
iiDupl1cate
ASAP_AMP
Hey bro, the legendary Pokémon cheat won’t work for me, I put in the master codes on their own and
says code invalid, I put the master codes and the code for the Pokémon I want all to together and it still
won’t work. I’m using GBA4IOS.
Reply
Ok
Reply
Anonymous
I input the codes and turn them ON and then either the code just doesn’t work or the game starts
rebooting.
Reply
PokemonCoders
Reply
NizNiz
And when I teleport to the elite four Sidney I just walk backwards and get stuck.
Reply
Ryan
I use the same app and just put in both sets of codes in
Reply
Jacob
What if I was trying to spawn in a Zapdos do i go to the bush and he would be there ,but I’ve tried and
still didn’t work .
Reply
PokemonCoders
Reply
Anonymous
Reply
PokemonCoders
Some works and some do not. Cheating is not fully supported on OpenEmu but feel free to give the
listed cheats above a try. Also, I guess theirs an improvement in their latest update.
Reply
Faded charizard
How do you get the catch the trainers Pokémon to work? I’ve inputted the cheat correctly but I just
sleep getting bad eggs
Reply
PokemonCoders
Reply
Anonymous
Reply
PokemonCoders
This is to avoid getting a bad egg after catching the trainer’s Pokemon.
Reply
Ryan
I’ve pressed L + R before throwing the ball and it still gives me bad eggs. I mash the buttons repeatedly
sometimes, I’ve tried both at the same time and both seperately and I just get bad eggs. Could you go
further into explanation?
PokemonCoders
What version of Emerald do you have? The cheat works best for Emerald V1.0 or the Emerald Mugs
version.
Ryan
I don’t know what version I am using sadly, I’ll try to find the version(s) you’re talking about
Jon
Hey I have a galaxy S6 and the John gba emulator. I was wondering were do I put the master codes for
some of the cheats. The rare candy and master ball cheats worked but the teleport cheats didn’t. I
wanted to get mew and deoxys but idk how to get there. Any suggestions?
Reply
PokemonCoders
After activating the teleport, go inside on any door and you’ll automatically teleported to the described
location.
Reply
LargoMaster
I’ve tried this and without results, every time I go through a door it fails.
PokemonCoders
Please double check your Emerald ROM, if you have V1.1 then the cheat should not work cuz it requires
V1.0.
Reply
Rango
Thank you for these cheat codes now I have a team of legendarys level 100 super strong.? Legendarys
(I’m using): Mew, Groudon, Rayquaza, Kyogre, Latios and Latias.?
Reply
PokemonCoders
Wow, those are really strong Pokemon. Maybe you could try playing any of these popular Pokemon
ROM hacks after playing emerald. These games are a lot more fun in my opinion.
Reply
Anonymous
How can I get the Pokémon from where should I collect them if I have entered the cheats.
Reply
after u entered the *cheats* u should walk in the grass or water or wherever u find a pokemon it will
change like u can find only pikachu in that route it will base of what cheats u enter and after u catch it. It
will go to PC
Reply
Corey dickinson
How do you get to the legendary pokemon you have put cheats in for
Reply
Tyler
Hi,
I have a question, the codes are not working for me now but I want them to work so badly. I am playing
on a Mac with OpenEmu. What can I do to let the codes work, I have tried it but none of them work. Do
I maybe have to download an other emulator? Please let me know!
Reply
PokemonCoders
Hello Tyler, if the codes don’t work you it could be either of your Emerald rom version or the OpenEmu
itself. The listed cheats above and most Emerald cheats need an Emerald version V1.0 to make it fully
work.
The first thing you need to do, I would suggest downloading Emerald V1.0 (Maybe I can give you this file
through Request form) or switch to another emulator, try using VisualBoy Advance-m for Mac, you can
find it in Emulators section.
Reply
Deo
Reply
Tyler
Hi,
My codes are not working for me, I am playing on a Mac with OpenEmu. I really want the cheats to work
and I have tried almost every way. Do I have to download another emulator maybe? Please help!!
Reply
sam
Reply
In Need
Hello, just wondering why my game keeps on resetting? I was using GBA4iOS to emulate Emerald, all the
cheats are working except the wild Pokémon modifier. I had it set to Feebass and at first it didn’t spawn
so I tought “maybe it keeps the Pokémon’s encounter rates” before it restarted. I was fine and thought
“okay, maybe it did that to plug in the data.”
But then I ran into a Feebass named Zigzagoon and the game reset! It happened 3 times when I
encountered one, but twice when I had it active and randomly spoke to a dude on route 101! I activated
the mastercode first and everything!
Reply
PokemonCoders
Hi there bro, I can see two possibilities with your restarting problem. First, the Wild Pokemon Modifier
code is not compatible with GBA4iOS and second, your version of Emerald do not support the cheat. If
you believe you did the correct steps in putting the codes then it’s something to do with your emulator
or ROM.
I have few solutions I can offer; First, Switch to another GBA emulator you can use MyBoy (Android) and
Visual Boy Advance(Windows), second find and download Emerald V1.0, third simply do not use the wild
Pokemon modifier cheat.
Reply
Karunesh
It’s working good ya thanks but only tm and hm cheats is not working what we want to do for that it’s
not coming in bag and pc
Reply
PokemonCoders
Apologies pal, my bad. It supposed to be in the PokeMart and not bag or PC. After activating the cheat
you need to visit PokeMart and purchase the first item in the list. The first item should be your TM/HM.
See the cheat again and take a look at the image for clearer illustration.
Reply
Jake
I’m trying to use the infinite rare candy in pc cheat but it won’t work
Reply
Anonymous
December 28, 2017 at 6:37 AM
Reply
gadgetnano
For some reason not all the pokemon modifier codes won’t work for me. I can use the Pikachu, Pidgey,
Pidgeotto, Pidgeot codes but when I try pretty much anything else it doesn’t work. I am using them to
EV train my pokemon. I have tried Wigglytuff, Machamp, Blastoise, Alakazam, and Golem. None of
which work
Reply
PokemonCoders
May I know the version of your Emerald rom and where did you get it?
Reply
Ewan
Reply
PokemonCoders
January 1, 2018 at 4:14 PM
Reply
legendzekrom
Excuse me, im lookin for 1 hit kill or BP cheats if theres any so..plz.
Reply
West Ninja
Reply
PokemonCoders
Sorry mate but that’s not possible, the ThunderPunch TM was only available in Generations II, that was
TM41 but later removed in Generations III. If you want to teach your Pokemon with ThunderPunch you
need to beat the Elite Four and go to the move tutor in the Battle Frontier. Hope this helps.
Reply
april balingit
November 30, 2017 at 3:29 PM
hello, I I’m using my gameboy advancED to run the game, and the codes are working,, but the walk
though walk codes is not work when i tried to walk in the sea and wall
unaided eye
Reply
PokemonCoders
Hi April, seems like you have the ROM V1.1 version of FireRed (US). The FireRed (US) V1.0 works
perfectly for all of the listed cheats here.
Reply
Angel
Hello, I I’m using mGBA to run the game, and the codes seem to sometimes work, and not work, any
idea’s on how to fix? Or should I use a different emulator?
Reply
PokemonCoders
Hi there Angel, to make the cheat to fully work you need an Emerald (US) with version V1.0 not the
V1.1. I haven’t tried using mGBA but the GBA4iOS works well for my readers.
Reply
Sweden
The rare candy cheat doesn’t work what should I do from where should I withdrew them
Reply
PokemonCoders
Reply
Power House
I looked at the whole Pokemon spawn codes and can’t find Ralts I have seen Gardevoir but I like to start
from its first stage and level it and evolve personally can you tell me where since its the only site which
works for me.
Reply
rafeh waqar
Juraijf
The teleport cheat for rout 120 doesn’t work on me,but everything else does.I’m using my boy emulator
Reply
Anonymous
Reply
PokemonCoders
Seems like the wild Pokemon modifier cheat won’t work for V1.1 emerald roms. Where did you get your
emerald?
Reply
Cristian
Is there ANY way to get codes that ACTUALLY work? I only found ONE website that has codes that work.
All I want is level modifiers but they all crash my game. I can’t download an emerald rom 1.0 because
none specify what kind of version it is. And worst of all, i don’t want to restart my entire game since save
files can’t be downloaded (or maybe I just don’t know)
I’m using GBA4iOS app.
Reply
PokemonCoders
Hi there Cristian, did you put first the mastercode before the level code? Master code should be entered
separately from the level code. I just tested the cheat code with my Emerald ROM and it’s working
perfectly fine for me. Let me know if there’s anything I can help.
Reply
Isiah
Hey what’s the master code? I’m blind so sorry if you did say it.
PokemonCoders
Master code for what cheat? FYI, some cheats do not need to have master code.
counter
Corben
Umm, how does the teleport cheats work? I put it in, and I’m still in the same place.
Reply
PokemonCoders
You have to get into any doors to teleport. Check my Youtube channel, I made a video for this.
Reply
Noot
Reply
PokemonCoders
What particular cheat are you referring? If the cheat has mastercode then you have to put it first as a
separate cheat and next will be the main cheat. You gotta check my Youtube channel to see how it is
done.
Reply
Pokemon fan
RARE CANDY CHEAT IS NOT WORKING FOR ME(BOTH)……I AM USING MY BOY EMULATOR
Reply
PokemonCoders
Reply
Nov30gamin
Reply
PokemonCoders
Not sure but I believe there are reddit members sharing the file.
Reply
SPC
Finally, some wild pokemon codes that work. None of the codes from other sites worked, not even
GameFAQs, though I suppose those guides are very old…
Reply
PokemonCoders
Yeah it seems those guides are old, I’m glad the codes helped you.
Reply
Anonymous
Reply
hmm?
And mines keeps kick me out so I start all over again and some times when a summon the legenderies
they do pop up but If I picked Mewtwo instead of that name it says a different pokemons name why is
that?
Reply
PokemonCoders
It could be you missed to enter the master code or just your rom version don’t support the cheat. What
emerald rom version you have? These cheats works best for v1.0.
Reply
Anonymous
Reply
PokemonCoders
Fascinating, I’m glad it worked for you. I’m afraid I can’t help you if you need a cheat for complete
Pokedex. I’ve been looking for that but no luck so far but I hope someone could give us the code.
Reply
zk678
when the walk though walls cheat was on blaziken just turned into a bad egg and after I closed it it said
the save file is corrupted the last save file will be loaded and it just keeps doing that.
Reply
PokemonCoders
Don’t use the cheat, your ROM version do not support it or look for the emerald version 1.0.
Reply
zk678
Reply
counter
Reply
counter
thanks a lot
Reply
PokemonCoders
Reply
PokemonFan524
Help!!
I am using VBA.
Reply
PokemonCoders
Reply
Anonymous
Rickles
I’m playing Pokémon Emerald using the full version of John GBA emulator and none of them work. What
am I doing wrong?
Reply
PokemonCoders
Most likely your ROM version do not support the cheat. Try looking for another version of Emerald (US).
Reply
waillllllorrrrd!!!!!!!!!!!!!!!
this works perfectly. I play fire red emerald and sapphire and emerald. cheats work for emerald. 5 star
rating
Reply
PokemonCoders
Glad it worked for you pal. Have fun. After playing emerald, I would suggest checking any of these
Pokemon GBA ROM hacks. ROM hacks are a lot more fun and amazing to play.
Reply
Anonymous
Reply
PokemonCoders
Reply
Kaushik
Hey I’d like to have TM codes please if u got them for emerald.
Reply
PokemonCoders
Hi there Kaushik, check the TMs & HMs section for the cheat.
Reply
Anonymous
Reply
PokemonCoders
Reply
When I use the pokemon modifer,it didn’t work. Can I know why and how to make it work?
Reply
PokemonCoders
Try another ROM. If possible get the Pokemon Emerald (U) Trashman version if you can find one.
Reply
Whyudodis
I used the pokemon modifier code and it keeps showing bagons and I turned off the code
Reply
BooBear
so if you use the rare candies in the pc one does it actually put it in there cuz if so its not working for me
and thats the only cheat that is active
Reply
BooBear
Reply
I have tried the masterball cheat multiple times and it isn’t seeming to work I’ve looked In the stores and
it never shows up am I missing a step?
Reply
Haru( Pokemon Player )
Reply
AntSwizzle
Hi so I use the GBA4iOS 2.1 and am using trash’s poke emerald rom. The codes that have worked for me
so far are the walkthrough walls, rare candies, masterballs, and teleporting to different cities etc. The
only one that keeps crashing and causing my game to restart is the pokemon cheat, I’ve looked at your
video and tried to troubleshoot to no avail. Was wondering if you could do a detailed step by step on
how you get the cheat to work. Every time I walk in the grass, i see a quick glimpse of the pokemon I’m
trying to catch and then the game resets. Very frustrating! I hope you could figure it out for me. Thank
you!
Reply
PokemonCoders
Awts AntSwizzle, that must very frustrating. Have you tried disabling other cheats except the wild
Pokemon modifier cheat?
Reply
AntSwizzle
D8BAE4D9 4864DCE5
A86CDBA5 19BA49B3
B749822B CE9BFAC1
A86CDBA5 19BA49B3
then I walk into the grass and boom the game resets after the encounter.
Reply
PokemonCoders
Whoa that’s weird. Try deleting other unused cheats and activate the cheat again.If the problem persist
try looking for another ROM.
Reply
Hi
I tried using GBA4IOS but the pokemon modifier cheat won’t work so i try using My Boy Emulator on
android phone and the cheat works.
PokemonCoders
emerald
the walk through walls cheat is not working. It works for the first few minutes and just restarts the
game.
Reply
PokemonCoders
Reply
emerald
Reply
Skyf
June 30, 2017 at 10:49 AM
Hey,pokemoncoders. I tried the infinite rare candy cheat and it doesn’t work. Can you help me?
Reply
PokemonCoders
There are plenty of reasons why a don’t work, first double check the code, next be sure to use a US
version Emerald ROM. To get the rare candy head over to your PC and withdraw them.
Reply
mouse
Reply
PokemonCoders
D8BAE4D9 4864DCE5
A86CDBA5 19BA49B3
B749822B CE9BFAC1
A86CDBA5 19BA49B3
3F63F9C8 5DCC780C
The mastercode is very important to make the cheat work and don’t forget to read and follow what is
instructed.
Reply
Mohd Asif
Your codes are awesome. Finished off emerald and fire red. Plz. Suggest me more games like this and
emulator too. I new to this type of games. I love it.. Once again thanks for codes. All of them worked
Reply
PokemonCoders
Man, there are dozens of ROM hacks you can play, maybe you haven’t yet tried any of them. Check em
out here https://www.pokemoncoders.com/pokemon-gba-rom-hacks/
Reply
James
Okay so I have an issue. I am playing Pokémon Fire Red, and Pokémon emerald, both “(U)” versions and
none of the Pokémon modifier codes for fire red have any effect at all. With emerald, the codes seem to
only cause the game to return to the title screen every two seconds. I am using GBA4IOS and have
checked my versions and codes multiple and have gotten no results. Please help!
Reply
PokemonCoders
For FireRed use the (U) Squirrels version, for emerald I think the cheats perfectly works for (U)
Trashman, you can get these ROMS on EmuParadise.
Reply
Anonymous
I used roms from loveroms.com and all the cheats work for me also the different versions have a slight
variation in the coding for some also I use the myboy gba and it works fine
Reply
PokemonCoders
Reply
mythicloss
Reply
PokemonCoders
Somethings wrong with the code. The first 4 is missing. Thanks for letting me know and I already fixed it.
Reply
mythicloss
Reply
PokemonCoders
No problem my friend, It’s my pleasure to help you and my fellow Pokemon gamers. ?
Reply
LukeLucky
Reply
PokemonCoders
Don’t activate too many cheats at once. Disable a cheat after use, or be sure to use a US version of
Emerald.
Reply
gxkuthegxat
Reply
Anonymous
Reply
PokemonCoders
April 17, 2017 at 2:50 AM
After activating a teleport cheat, go inside a door on any building such as Pokemart, center and you will
automatically teleport to your selected place.
Reply
WrittenWithout
I have tried the teleport cheat many times and it still doesn’t work. I have tried disabling other cheats
first and that doesn’t help. It just causes my game to lag whenever I turn it on or off, but doesn’t take
me anywhere. I’m using MyBoy so all the other cheats seem to work except the teleport cheat.
Reply
WrittenWithout
Nevermind I figured it out. I read farther down in the comments and found one where someone asked
about master codes. I turned the master code off I had activated and it worked fine. You guys are
awesome, great and flawless codes.
Reply
PokemonCoders
Good to hear that you figured it out yourself mate. Congratulations and have fun.
Fiq
April 14, 2017 at 4:37 AM
Reply
PokemonCoders
Check Pokemart after activating the cheat, you can get it for 0.
Reply
Sergiost40
Reply
Pokemoncoders.com
Reply
Colemanbro
May 17, 2017 at 4:14 AM
Is there an email i could send some other cheats to that could be useful?
Reply
Alec
Hey can you put a cheat we’re the lengedary area are so I can get there and the lengedary are kyogre
and groudon
Reply
PokemonCoders
Anonymous
Reply
PokemonCoders
Reply
Ron
My game file is corrupt from using this codes and my game is useless and my poked em was already at
140 before I can’t get in my pc or it freezes
Reply
PokemonCoders
Don’t activate too many cheats at once. Cheats can be cool and useful if used correctly but can be a big
problem when inappropriately used.
Reply
James Miller
How do you nickname the shiny pokemon? The names after being caught are always gibberish.
Reply
PokemonCoders
Reply
ness
Reply
Terry chasteau
True true
Reply
PokemonCoders
Oh okay.
William
There is just turn off cheat when it asks for nickname when catching them they will still be shiny or use
this
Master code:
D8BAE4D9 4864DCE5
A86CDBA5 19BA49B3
Shiny code:
77BFC010 FE8DCA24
B2C5E8F4 074034FB
9C1FE7D6 B07AE5A0
63149984 A8C01E2C
You won’t need to turn on and off shiny cheat and works with starter
Reply
William
FYI this was for myboy gba and emerald from loveroms.com
Reply
William
Have the cheat on catch Pokemon when it asks for nickname turn off cheat and say no they will have
their names I also have a cheat that works without turning on and off cheat also works for your starter
Reply
William
June 21, 2017 at 11:57 PM
This is them
Master code:
D8BAE4D9 4864DCE5
A86CDBA5 19BA49B3
Shiny cheat:
77BFC010 FE8DCA24
B2C5E8F4 074034FB
9C1FE7D6 B07AE5A0
63149984 A8C01E2C
Reply
Anonymous
Just turn code off before catching, Nick name or not, their name won’t be gibberish
Reply
AlRocks
I have gba my boy android emulator. I entered the masterwork the pokemon spawned code but now I
can’t get all pokeballs pls help
Reply
PokemonCoders
March 11, 2017 at 8:16 AM
Did you try deactivating the master code? Or, is your Emerald ROM a US version?
Reply
Ede
Reply
PokemonCoders
That’s not possible on original Emerald game, unless you use ROM hacks.
Reply
Reply
PokemonCoders
December 15, 2016 at 2:51 AM
Reply
at least legendary pokemon worked i got all them 🙂 except the regis cause i gathered those ones by
myself in the chambers.
PokemonCoders
unkown again
Reply
PokemonCoders
Reply
Winter Kai
Whats the code for bulbasaur ? The one up there isnt working.
Pokemoncoders.com
Please double check the cheat code. The code for bulbasaur is
B749822B CE9BFAC1
A86CDBA5 19BA49B3
427AB7E FA5ACF46
Dolfo
Reply
Anonymous
January 23, 2017 at 11:03 AM
For some reason when using shiny cheat all i see are male pokemon no female i want a shiny female
pokemon but its not working help
Reply
PokemonCoders
Sorry to hear that mate but I’m afraid it isn’t possible for shiny cheat.
Reply
Anonymous
All I see is female lol, I think it has something to do with the gender of your Character.
Reply
Injustice
Why the cheat wild pokemon modifier for Bulbasaur is nit working..pls help
Reply
PokemonCoders
Reply
Try using venusaur or ivysaur then breeding them at the daycare with ditto
Reply
Pokemoncoders.com
Reply
user
Reply
pokemon master
Reply
PokemonCoders
Cool 🙂
Reply
Gaming
I use the mew code but it just crashed,then i use the island code mew flys away
Please help
Reply
Anonymous
ggggsdgggsgs
Reply
PokemonCoders
October 3, 2016 at 2:36 PM
Reply
D4RKSAVAVGE
Reply
PokemonCoders
Reply
DarkEdge
PokemonCoders
You can’t find Yveltal in regular Pokemon emerald game unless you play a rom hack. You can only find
Yveltal in Pokemon X&Y and onwards.
osvaldas
Reply
Pokemoncoders.com
The problem is not the code but it’s OpenEmu. I suggest installing Bluestacks and download My Boy
android app to play GBA games on your Mac.
Reply
daniel gonzales
I’m on openemu
Reply
daniel gonzales
Reply
B
I’m trying to find the emerald rom you provided, but your emerald rom page listed on here no longer
has the download option. Where can I find the exact rom needed.
Reply
Kayle
Reply
PokemonCoders
Reply
Anonymous
I have a mac and play on openemu but its basically just the legendary pokemon cheats that work
Reply
PokemonCoders
September 1, 2016 at 7:46 AM
Mate, OpenEmu is unstable right now for Pokemon GBA cheats. I suggest installing bluestacks and
download My Boy android app as an alternative.
Reply
Deepak Zachariah
I tried the walk through walls cheat the first time. It worked, with the master code. But I tried it again
and it didnt. Please tell my why.
Reply
PokemonCoders
Reply
Luis flores
This is great
Reply
PokemonCoders
August 16, 2016 at 11:03 PM
Thanks man.
Reply
tehpastaboy
Reply
PokemonCoders
It varies on the ROM version you have or your emulator, this works on MyBoy for Android.
Reply
Hob
Reply
PokemonCoders
September 1, 2016 at 7:48 AM
Reply
Raleith
Hello mate! i just have to ask: Why at the momento i input the codes i get a dropdown on my Throttle
(Frame Skip>Throttle) and how do i solve it
Reply
Leave a Reply
Comment
Name
This site uses Akismet to reduce spam. Learn how your comment data is processed.
report this ad
Primary Sidebar
Pokemon DarkDiamond
View Results
Poll: Vote For Your Best FireRed Based Pokemon ROM Hacks
Pokemon AshGray
Pokemon Clover
Pokemon Rusty
Pokemon Unbound
Pokemon Outlaw
Pokemon Vega
Pokemon Fuligin
Pokemon Eclipse
Pokemon Cyan
View Results
Did we missed to list your favorite FireRed rom hack? See our Pokemon FireRed ROM Hacks page and
mention the game with some details.
Poll: 5 Best Pokemon Emerald ROM Hacks (Max 5 votes per user)
Pokemon Glazed
Pokemon CrystalDust
Pokemon CAWPS
View Results
Did we missed to list your favorite Emerald rom hack? See our Pokemon Emerald ROM Hacks page and
mention the game with some details.
Trending
Footer
About PokemonCoders
About PokemonCoders.com
Pokemoncoders.com is your resource for your Pokemon gaming needs. This website is NOT sponsored
or endorsed by Nintendo, GAMEFREAK, or The Pokémon Company.
Please be aware that some of our posted cheats are not tested, use them at your own risk.
We only share ROM hack IPS/UPS patch files. We don’t share and greatly discouraged giving information
about ROM files.
Useful Guides
How to Fix Not Working and Glitchy Cheats for Pokemon GBA Games
Recently Updated
Pokemon Yellow Cheats – Gameshark Codes for Game Boy and Game Boy Color
Search
Recent Comments/Replies
PokemonCoders on Pokemon Yellow Cheats – Gameshark Codes for Game Boy and Game Boy Color
PokemonCoders on Pokemon Leaf Green Cheats – Gameshark Codes for Game Boy Advance
Sean cameron on Pokemon Emerald Legendary Pokemon Cheats with Gameshark Code
PIYUSH on Pokemon Leaf Green Cheats – Gameshark Codes for Game Boy Advance
Site Footer
Home
About
Terms of Service
Privacy Policy
Contact Us
Sitemap
xx