Documente Academic
Documente Profesional
Documente Cultură
Pressure Guidelines*
X50 Fiber X40 Fiber FRP
279 mm
5-25°C, 9.3 barg (41-77°F, 135 psig)
Maximum Shellside LIQUID Working 5-50°C, 7.2 barg (41-122°F, 105 psig) (11.0 in)
Housing Characteristics
Fiber Reinforced Plastic (FRP) with 316L SS Vessel/CF3M SS End Caps.
Material PVDF for all wetted surfaces ≤ 32RA (0.8μm SI) on schedule
and FRP flanges 10S pipe per ASTM A312.
Flange Connections
• 3 inch class 150 raised face
• 3 inch class 150 raised face Lumenside
flange per ANSI B16.5
flange per ANSI B16.5
Shellside (Liquid Inlet/Outlet) • 80A 10K flat face flange per
• 80A 10K flat face flange per Shellside
JIS B2238
JIS B2238
• 3 inch sanitary
• 1 inch class 150 raised face Note: All dimensions are
• 1 inch class 150 raised face
flange per ANSI B16.5 nominal values for the
flange per ANSI B16.5
Lumenside (Gas/Vacuum) • 25A 10K flat face flange per PVDF-lined FRP housing.
• 50A 10K flat face flange per
JIS B2238 SS contactor uses a different
JIS B2238
• 1.5 inch sanitary end cap design. Sanitary
connections are only available
Mounting Kit with 316 SS housing. See
full housing drawing on
A Mounting Kit with 2 cradles and 2 straps is available and sold separately. 3M.com/Liqui-Cel for
It will hold the contactor horizontally or vertically. additional details.
Regulatory 70
Complies with the limits as set by RoHS Directive 2011/65/EU Annex II. 3M™
Liqui-Cel™ EXF-10x28 Series Membrane Contactors are constructed of FDA 60
Title 21 CFR § 175-190 compliant materials for wetted parts only. For FDA Title
21 CFR compliance on the PVDF-lined FRP vessel 20,000 gallons of liquid 50
should be flushed through the contactor prior to use.
0 11 23 34 45 57
Water Flow Rate (m3/hr)
Water Flow Rate (US gpm)
Water Flow Rate (US gpm)
0 50 100 150 200 250 100
100 0 50 150 200 250
12.0 0.83
80
60 8.0 0.55
6.0 0.41
40
4.0 0.28
20
2.0 0.14
0 0.0 0.0
0 11 23 34 45 57 0 11 23 34 45 57
Water Flow Rate (m3/hr) Water Flow Rate (m3/hr)