Documente Academic
Documente Profesional
Documente Cultură
EXCELLENT VISIBILITY
Optimal visibility of the
front wheels due to the
PERFORM SIMULTANEOUS MOVEMENTS narrow turret.
Increase productivity with the ability to
combine three hydraulic movements
at the same time along with reaching
the maximum lift height in 30 seconds.
ENGINE / CHASSIS
The engine is located in the
rear of the chassis providing
COMPACT / LIGHT WEIGHT a lower center of gravity of
This unit is designed to transport the unit making the MAN’GO 33
with a narrow width of 5’10” (1.8 m) lighter and more compact than
and machine weight of only competitive units in its category.
9,150 lbs. (4150 kg).
SMOOTH PLATFORM
OPERATION
All hydraulic movements
are proportionate allowing
for smooth operation and
precise adjustments in HIGH GROUND CLEARANCE
tight areas.
13" [320 mm] OUTSIDE TURNING RADIUS
13'6" [4.11 m]
2
MAN’GO 33
SWING GATE
PLATFORM ENTRANCE
The swing gate makes for easy
and quick operator entrances to
and from the platform.
REMOVEABLE GALVANIZED
PLATFORM FLOOR
The platform floor is removable
and easy to replace if needed.
POWER OUTLET
Power outlet is located
in the platform to
power electric tools
and accessories.
SELF-DIAGNOSTIC AT
SERVICE MADE EASY
GROUND CONTROL PANEL Accessible, tool-free
The self-diagnostic system is fully integrated panels allow for quick
for fast detection of fault codes, saving time and easy maintenance,
during maintenance and unit configuration. drastically reducing
downtime on the job.
CONNECTED MACHINE
Manage unit location,
maintenance cycles,
service warnings and more
with the EasyMANAGER
telematics feature.
NO DEF REQUIRED
3
MAN’GO 33 SPECIFICATIONS & DIAGRAMS STANDARD FEATURES
• 3 Simultaneous Movements • Slinging and Securing Rings
Platform Height (m) 32’6” (9.91)
• Audible Alarm and Illuminated Lamp • Steel Turret Covers
Horizontal Outreach (m) 21’11” (6.70)
(Leveling, Overload, Lowering) • Lockable Fuel Cap
Up and Over Height (m) 15’3” (4.80) • Self-Diagnostic System
CAPACITIES
F
I y
*Changes according to options and standard
of the country where the machine will be delivered. C
A B