Documente Academic
Documente Profesional
Documente Cultură
Summary
(workbench,consumables,
platform)
No. DESCRIPTION
Ⅰ. Equipment overview
electrical installation equipment is the designated equipment for China selection
competition of the 44th world skills competition, in compliance with the requirements and
standards of WSC. It will train various kinds of innovated design ability, practical operation ability,
and engineering practical ability of students according to the standards and processes of WSC. It,
as a designated equipment in China national selection competition for world skills competition,
has received great attention in China. The equipment is also equipped with the world's skills
competition supporting resource package.
This equipment also includes building intelligent control training system, using KNX digital
distributed control system for automation and centralized control management within the area of
all kinds of lighting, air conditioning, curtains and other electrical equipment. It can fulfill the
energy monitoring, not only effectively managing the electrical equipments, and providing
flexible functions and effects, but also maintain and extend the service life of lamps and electrical
equipment to achieve safety, energy saving, hommization , intelligentization . It can also be
conveniently used according to the needs of users for expansion in the feature.
Electrical installation device project, taking world skills competition modes and ideas for
reference, is designed by combining with the practical training characteristics of technical schools.
It is synchronous with the latest information of electrical installation device project in WSC,
complete sharing the resources. The built equipment, in full compliance with the world
competition site environment, let students experience the charm of the world competition.
Related supporting information of this equipment consists of not only supporting test and
evaluation standard of world skills competition and national skills competition, but also the
training simulation questions and evaluation standards for WSC, and safety and health standards,
etc.
No. DESCRIPTION
Ⅲ. Features
(1) It uses the actual housing construction structure to isolate each room, close to the work site and
of full compliance with the guidelines and scope of knowledge of the World Skills Competition .
(2) It is installed by use of patch board and wooden mounting plate structure, which is in full
compliance with the equipments requirements of the World Skills Competition. Features: a. This
equipment complies with architectural standards; b. The use of wood plates makes it closer to the
wall mounting for students; c. Patch board structure increases the flexibility of equipments which
is convenient for practical teaching after competition; d. Open room with trapezoidal structure,
fully consistent with the World Skills Competition environment, makes students easily complete
installation of different lines within the three-dimensional space and master various installation
technology; e. Patch board is adopted for easy training and simulation test. It can be repeatedly
used and easy to operate by using patch board. The wooden plate in skills assessment can simulate
real race conditions.
(3) It provides with a fault detection module which contains lighting and electric drive control
principle. Students will complete the task of failure detection through the device including
detecting the fault type and the fault area, and accordingly making analysis according to the
setting of the fault .
(4) One student is to compete(or train) independently who needs to compete within the specified
time in accordance with the requirements of the task module (or training). Combined with
technical colleges practice teaching characteristics, this total task consists of several sub tasks,
which are interrelated to fully train the electrical equipment installation and debugging capabilities
of students, especially the repair and maintenance ability of electrical equipments.
5/20
No. DESCRIPTION
Ⅳ.Configuration
No Item Picture(for reference only) Functions
No. DESCRIPTION
8 Computer table
No. DESCRIPTION
No. DESCRIPTION
No. DESCRIPTION
No. DESCRIPTION
No. DESCRIPTION
No. DESCRIPTION
8)Rotating and counter-rotating control circuit of three phase asynchronous motor with
connector interlocking
9)Rotating and counter-rotating control circuit of three phase asynchronous motor with double
interlocking
10)Automatic back and forth control circuit
11)Rotating and counter-rotating point move and start control circuit
12)Automatic round trip control circuit with point motion
13)One way point move and start control circuit of asynchronous moto
14) KNX overall installation and wiring training
15) KNX Smart Panel Installation and wiring training
16) KNX binary output module installation and wiring training
17) KNX smart curtain controller and wiring installation training
18) KNX logic controllers and wiring installation training
19) KNX twelve into one sensor wiring installation training
20) KNX dimming module and wiring installation training
21) KNX communication connections training
22) KNX software training
23) KNX programming and programming methods training
24) KNX cognition and wiring of various components
13/20
No. DESCRIPTION
I Overview
The company designed the intelligent building control training system that uses DL-KNX full digital distributed control
system within the region all types of lighting, air conditioning, curtains and other electrical equipment for automation
and centralized control management, energy monitoring, not only can effectively manage electrical equipment buildings,
provide flexible functions and effects, can also maintain and extend the life of the lamp and electrical equipment, to
achieve safety, energy conservation, humane, intelligent effects, and can easily use and be expanded according to the
needs of users. The training building intelligent control system, is a comprehensive training system for higher education
and vocational and technical education and development, applicable to all types of vocational schools (college) of
mechatronics, automation, and other professional teaching and engaged in related professional training technical
personnel. The system not only can be used as building automation and network of teaching and training systems, and
subsystems may also cooperate to form a network of residential and intelligent building classrooms.
II Technical parameter
1. Input power: single-phase three-wire AC220V ± 10% 50HZ
2. Working environment: Temperature -10 ? - + 40 ? Relative humidity <85% (25 ?) Altitude <4000m
3. Power control: automatic air switch off power supply, overcurrent protection, leakage protection devices
4. Output Power:
DC power supply: 24V / 3A, with a current-limiting short-circuit soft protection and self-recovery function.
No. DESCRIPTION
No. DESCRIPTION
No. DESCRIPTION
Features:
ETS is truly unique: everywhere in the world, you may simply use one and the same ETS tool for every KNX project
and for every KNX certified device.
This installation tool is a de facto part of the KNX standard.
All product databases with certified products from all KNX manufacturers can be imported in ETS!
The KNX system together with ETS offers an easy to handle manufacturer independent toolbox for all planners
and installers.
17/20
No. DESCRIPTION
V System configuration
VI Training content
1. KNX overall installation and wiring training
2. KNX Smart Panel Installation and wiring training
3. KNX switch value output module installation and wiring training
4. KNX smart curtain controller and wiring installation training
5. KNX logic controllers and wiring installation training
6. KNX twelve in one sensor wiring installation training
7. KNX dimming module and wiring installation training
8. KNX communication connections training
9. KNX software training
10. KNX programming and programming methods training
11. KNX cognitive and wiring of various components
18/20
Item Description
Features:
• Replicates proper machine set-up using a Welding Procedure
Specification. Students must select gas type, process, gas
flow, amperage/voltage and wire-feed speed in the system.
• Retractable SMAW stick stinger, GMAW/FCAW gun and GTAW
TIG torch, filler metal and adaptive foot pedal devices
realistically simulate the look, feel and action of actual
guns and torches
• Practice flat, horizontal, vertical and overhead 5G and
6G on mild steel, aluminum, stainless steel
• Extremely realistic weld puddle is visually and audibly
responsive to operator behavior, helping welders learn
when to adjust welding technique. Welding discontinuities
appear when improper technique is used.
• Simulates sparks, slag, grinding and weld cooling.
• Welding discontinuities appear when improper welding
technique is used
• Virtual bend test provides results instantly and reveals what causes a weld to pass or fail.
• Tracks and scores key weld parameters including work angle, travel angle, travel speed, distance and position
• Replay mode (in multiple views) helps instructors and welders identify what went wrong or well.
• SMAW and GMAW Welding Training Curriculum, Student Workbook, Instructor Guide
Processes:
• Simulated SMAW
• Simulated GTAW
• Simulated GMAW
• Simulated FCAW
Equipment Details:
Input Power: 230V/60Hz Single User
Input Current: 2A at 230
Net Weight: 950.00 (430.92 kg)
Dimensions:
Machine: 34.4H x 19.8W x 38.4D in. (874H x 503W x 975D mm)
Stand: 78.5H x 36W x 46.38D in. (1993.9H x 914.4W x 1178.1D mm)
19/20
No. Description
Features:
• Automatically adjusts to input power from 200-600V, 50 or 60 Hz, single phase or three phase. Welding output
remains constant through the entire input voltage range.
• High power factor and efficiency
• Cloud based system to view or analyze welding data
• Compact and Durable Case
• Over 65 standard welding waveforms
• Standard Ethernet – Allows for effortless software upgrades
Equipment Details:
Input Power: 208/230/380/415/460/575/1/3/50/60
Rated Output: 350A/31.5V/40%
Input Current
3PH/40% - 39/35/19/17/14A
1PH/40% - 60/61/NA/NA/NA A
Output Range: 5-350A DC
Processes:
• Stick
•DC TIG
•Pulsed DC TIG
•MIG
•Pulsed MIG
•Flux-Cored
Includes:
• Advanced Process Welding Machine
•Wire Feeder
•.035 in. (0.9 mm) Drive Roll and Split Wire Guide Kit
•.040 - .045 in. (1.0 - 1.2 mm) Drive Roll and Split Wire Guide Kit
•Gun and Cable Package
•Work Lead and Wire Feeder Power Source Cables Package
•Inverter and Wire Feeder Cart
•Flowmeter and Regulator
•Arc Start Switch
•Advanced Module
□Provides multi-process reverse polarity (DC+), straight polarity (DC-), AC, high frequency TIG and STT
functionality.
□Integrated Control Cables
□Quick Lock Mounting System
□Ingress Protection Safety
□Power Source Output Pigtail Adapter Cable
□25 ft. (7.6 m) Remote Voltage Sense Lead
□ArcLink Output Receptacle
□Differential Input and Output
□Shielding Gas Input
•10 ft. (3.0 m) input power cord
•Portable Welding Fume Extractor
20/20
We trust that we have given you our best offer. We look forward to receiving your valuable order soon.
Thank you very much.