Documente Academic
Documente Profesional
Documente Cultură
Product range
Engineering Services
Where to use
deva.metal®
advanced powder metallurgy. It is fully
compacted, unlike oil-impregnated
porous bronze materials that are weak
by comparison. deva.metal® is provi-
ded with an evenly distributed solid Reference applications
lubricant throughout its metallic matrix. Iron and steel works, furnace con-
deva.metal® struction, fans, foundry machinery,
- is suitable for dry running at slow waste water cleaning plants, water-,
sliding speeds and high loads, steam- and gas-turbines, pumps and
- is stick-slip free, compressors, food and beverage
- has high resistance to temperature industry machinery, packing
and corrosion, machinery, apparatus engineering,
- is insensitive to contamination and mechanical handling equipment,
edge pressures, etc.
Material properties
(depending on alloy
Material property and operating conditions) Unit Value Tolerances
–)
Max. permitted static load ( p MPa 260 Housing bore H7
Max. sliding speed (U) m/s 0.4 Bearing inner Ø C7 for D8 after inst.
–U-value
Max. p MPa × m/s 1.5 Shaft Ø h7
Tolerances Installation
Other installation tolerances are The recommended method for instal-
possible, provided that a safe fit in ling bushes is supercooling (bronze
the housing and the necessary alloys only) or press-fit.
running clearance are maintained.
3
Other forms and
variants on request.
deva.bm®
maintenance-free
Where to use
Material properties
Tolerances Installation
Other installation tolerances are Press-fit installation or supercooling.
possible, provided that a safe fit in
the housing and the necessary
running clearance are maintained.
Sliding surface
Sliding layer (bronze)
Solid lubricant (graphite)
Backing
Photomicrograph deva.bm ® Custom parts Sliding plates Thrust washers
4
Other forms and
variants on request.
deva.bm®/9P
maintenance-free
Where to use
deva.bm ®/9P
al. The sliding layer is applied to a machinery, packing machinery, food
stainless steel backing in a combined and beverage industry machinery,
rolling/sintering process. printing machinery, shut-off valves,
PTFE serves as lubricant and offers hydro-mechanical engineering, tire
very low friction and wear rates. molds, apparatus engineering, etc.
An optional running-in film can extend
the bearing lifetime under certain
operating conditions.
Material properties
Max. permitted dynamic load ( –p ) MPa 150 Bearing inner Ø H8/H9 after inst.
Friction coefficient (dep. on operating cond.) µ 0.05 to 0.15 Shaft surface finish Ra 0.2 to 0.8 µm
Tolerances Installation
Other installation tolerances are Press-fit installation or supercooling.
possible, provided that a safe fit in
the housing and the necessary
running clearance are maintained.
Sliding surface
Sliding layer (bronze)
Solid lubricant (PTFE)
Stainless-steel backing
Photomicrograph deva.bm ®/9P Custom parts Sliding plates Thrust washers
5
Other forms and
variants on request.
deva.glide®
maintenance-free
Where to use
Material properties
Max. silding speed (U) m/s 0.4 Bearing inner Ø E8 for H10 after install.
–U-value
Max. p MPa × m/s 1.5 Shaft Ø c8 /d8
Friction coefficient (dep. on operating cond.) µ 0.10 to 0.15 Counter material hardness > 180 HB
Tolerances Installation
Other installation tolerances are Press-fit installation or supercooling.
possible, provided that a safe fit in
the housing and the necessary
running clearance are maintained.
Sliding surface
Solid lubricant ingots
Bearing material (bronze)
6
Other forms and
variants on request.
deva.tex®
maintenance-free
Where to use
deva.tex®
The machinable sliding layer con-
sists of fibres which are embedded
in epoxy resin. The resin carries PTFE
as lubricant for excellent tribological
performance.
deva.tex ® bearings are available in
standard dimensions up to 200 mm Reference applications
according to DIN 1850 and are Water turbines, hydromechanical
characterized by a very high engineering, agricultural machines,
corrosion and wear resistance. They earth moving equipment, railroad
are insensitive to contamination as vehicles, shut-off valves, chemical
well as to vibrations and shock industry, apparatus engineering,
loads. Custom dimensions are also wind turbines, etc.
Material properties
Max. permitted dynamic load ( –p ) MPa 120 Bearing inner Ø see techn. manual
Max. sliding speed (U) m/s 0.3 Shaft Ø see techn. manual
–U-value
Max. p MPa × m/s 1.8 Counter material hardness > 180 HB
Friction coefficient (dep. on operating cond.) µ 0.03 to 0.12 Shaft surface Ra 0.2 to 0.8 µm
Tolerances Installation
As the outer and inner diameters are Press-fit installation. Supercooling in
machinable, other tolerances are liquid nitrogen possible for inner
possible. diameters above 150 mm.
7
Other forms and
variants on request.
GLYCODUR® F
maintenance-free
Where to use
tin bronze layer sintered onto a stability and good thermal con-
copper plated steel base. The pores ductivity.
of this layer are filled during a rolling
process with PTFE and other friction
and wear reducing additives. A 5 to
30 µm top layer made of the same
material forms the running-in layer. Reference applications
GLYCODUR ® F sliding bearings General dry running applications,
combine the mechanical properties shock absorbers, hydraulics, pneu-
of the sintered bronze with the matic cylinders, medical equipment,
sliding and lubrication properties of textile machines, agricultural
a PTFE mixture. machinery, office applications, etc.
Material properties
Friction coefficient (dep. on operating cond.) µ 0.03 to 0.25 Counter material hardness > 50 HRC
Tolerances Installation
For tolerances please refer to the Installation by press-fitting or glue-
GLYCODUR® catalogue. ing. For details see GLYCODUR ®
catalogue.
Polytetrafluorethylene (PTFE)
Tin bronze
Copper layer
Sheet steel backing
Copper layer
Tin layer
8
Other forms and
variants on request.
GLYCODUR® A/AB
marginal maintenance
Where to use
GLYCODUR ® A / AB
have a copper-plated steel base and machining of the sliding surface
a 0.2 to 0.4 mm sintered tin bronze on installed bushings by boring or
layer. The major characteristic of turning, or in exceptional cases
these bearings is the POM top layer by rubbing, in order to eliminate
on the sintered bronze. possible misalignments, or to
This surface layer has a thickness of achieve small operating clearance.
0.3 mm and features pockets for
lubricant. GLYCODUR ® A bearings
are insensitive to misalignment and
subsequent edge load.
GLYCODUR® AB sliding bearings Reference applications
have a similar composition to With oil or grease lubrication such
GLYCODUR® A sliding bearings, as slowly rotating gears or aligning
but they have a 0.35 mm top layer movements.
Material properties
Max. permitted dynamic load ( –p ) MPa 120 Bearing outer Ø see catalogue
Max. silding speed (U) m/s 2.5 Bearing inner Ø see catalogue
–U-value
Max. p MPa × m/s on request Shaft Ø h8
Friction coefficient (dep. on operating cond.) µ 0.02 to 0.2 Counter material hardness > 50HRC
Tolerances Installation
For tolerances please refer to the Installation by press-fitting or glue-
GLYCODUR® catalogue. ing. For details see GLYCODUR ®-
Catalogue.
Polyoxymethylene (POM)
Lubrication indentation
Tin bronze
Copper layer
Sheet steel backing
Copper layer Tin layer
9
Other forms and
variants on request.
deva.eco®
marginal maintenance
Where to use
deva.eco® sliding bearings are thin- filled with solid lubricant to allow
walled, rolled CuSn8 parts with operation without additional lubri-
lubrication deposits. They can take cation.
deva.eco®
Material properties
Max. silding speed (U) (lubricated) m/s ≈ 2.5 Bearing inner Ø H9 after installation
–U-value
Max. p MPa × m/s 2.8 Shaft Ø e7 / f7
Friction coefficient (dep. on operating cond.) µ 0.015 to 0.15 Counter material hardness > 200 HB
Tolerances Installation
Other installation tolerances are the housing and the necessary Press-fit installation or supercooling.
possible, provided that a safe fit in running clearance are maintained.
Basic forms
10
Other forms and
variants on request.
Federal-Mogul Deva GmbH
Notes
The coefficients of friction and wear rates mentioned and also indicated in our catalogues or other technical literatures are no assured
properties. These values resulted from tests carried out on our test rigs under conditions not matching exactly the operating and
environmental conditions of the application of our products involved. Hence the real occurring operating conditions cannot be
extensively simulated. Guarantees can only be given upon written agreement on all decisive product features, test procedures and
parameter required.
All transactions conducted by DEVA® are subject to our terms of sale and delivery as indicated in our offers, product brochures and
price lists. Copies are available on request. Our products are subject to a constant process of development. DEVA® reserves the
right to amend the specification or improve the technological data without notice.
DEVA®, deva.bm®, deva.bm®/9P, deva.metal®, deva.glide®, deva.tex® and deva.eco® are registered trademarks of Federal-Mogul
Deva GmbH, D-35260 Stadtallendorf, Germany.
GLYCODUR®, GLYCODUR® F and GLYCODUR® A/AB are registered trademarks of Federal-Mogul Wiesbaden GmbH & Co. KG,
D-65201 Wiesbaden, Germany.
11
Further infomation about our products: