Documente Academic
Documente Profesional
Documente Cultură
- K8202-210-CAL-S-0007
CONSULTING ENGINEERS Title:- Design of ID Fan Foundation
Form No:- SPM-007-072001
5.4 DESIGN OF WALL SUPPORTING BEAM AT MIDDLE SLAB LEVEL OF FDN BLOCK
[For Unit # 3]
UDL on beam from wall , w = 267 kN/m [Refer Wall loading in Sec - 5.3.6]
span = 1.175 m
DESIGN LOADS
Model Left Support Mid. Span Right Support
Beam Load
mkd.
Element
Case Load
No M(+) M(-) S M(+) M(-) S M(+) M(-) S
Factor
(KN.M) (KN.M) (KN) (KN.M) (KN.M) (KN) (KN.M) (KN.M) (KN)
B1 1 55.294 235 69.1175 55.294 235
As(total)= 942 As(total) 942 As(total)= 942 As(total) 942 As(total)= 942 As(total)= 942
Extent of Left suprt Shear Reinf.(L1 in MM.): Extent of Rightt suprt Shear Reinf.(L2 in MM.):
DEVELOPMENT CONSULTANTS LTD Job No.- Doc. No.-
CONSULTING ENGINEERS Title:-
Form No:- SPM-007A-092001
Longitudinal Steel
Area of Steel required :: At Top = ### MM2 At Bottom = ### MM2
At Each side Face = 0.0 MM2
Transverse Steel
Area of Steel of stirrup required= ### MM2/MM
Additional required for stirrup = 0.000 MM2/MM
L1
Left support shear Mid span shear Reinforcement Right support shear
Reinforcement Reinforcement
Face of Column/support