Documente Academic
Documente Profesional
Documente Cultură
Individual work
Student name
Group 31
CODIGO 1054545267
2019 16-04
Introduction
In introducing the document's usually described, and a brief explanation or summary thereof is given. A reader to read
the introduction should be able to get an idea about the content of the text before reading itself. (4 to 10 lines).
Questions: (write with your own words)
1. What are the modes of propagation of electromagnetic waves?
Los modos de propagación son propagación directa, propagación por reflexión en el plano de la tierra,
propagación por reflexión atmosférica, propagación por retransmisión vía satélite, propagación a través de
Polarizar una onda significa que su campo eléctrico está dirigido en una sola dirección ya sea Y o Z, (vertical,
El fenómeno de reflexión total de una onda electromagnética se da cuando una onda incide de forma
perpendicular a la frontera entre un dieléctrico sin perdidas y un conductor perfecto se presenta una condición
El fenómeno de refracción total de una onda electromagnética se da cuando la suma de los ángulos de
que significa que el campo eléctrico paralelo no se refleja, sino que se refracta completamente.
5. What is the purpose of Snell's Law in the study of the propagation of waves?
Establecer la relación entre los ángulos de incidencia, reflexión y refracción generados por la propagación de
ondas.
Application exercises:
1. An electromagnetic wave of 𝑓 = 31𝑀𝐻𝑧 and 𝑃1+ = 200𝑚𝑊/𝑚2 , incident from the air (𝜂1 = 120𝜋 𝛺),
perpendicular to an infinite wall with an intrinsic impedance 𝜂2 = 105 𝛺. Calculate the reflected power 𝑃1− and
the transmitted power 𝑃2+ to the wall.
Coeficiente de reflexión
𝑛2 − 𝑛1
┌=
𝑛2 +𝑛1
105 − 120𝜋
┌=
105 + 120𝜋
−271.9
┌=
481.9
┌ = −0.5
La reflectancia es de:
𝑅 = |┌2 |
𝑅 = |0.52 |
𝑅 = 25%
La transmitancia
𝑇 =1−𝑅
𝑇 = 1 − 25%
𝑇 = 75%
La potencia reflejada
𝑃1− = 𝑅𝑃1+
𝑃1− = 50𝑚𝑊
𝑚2
La potencia transmitida
𝑃2+ = 𝑇𝑃1+
𝑃2+ = 150𝑚𝑊
𝑚2
2. An electromagnetic wave of 𝑓 = 31 𝑀𝐻𝑧 and 𝑃1+ = 200𝑚𝑊/𝑚2 , coming from a wave generator located 30𝑐𝑚
from the wall, which impinges from the air (𝜂1 = 120𝜋 𝛺) perpendicularly on a wall with an intrinsic impedance
𝜂2 = 105 𝛺 and 10𝑐𝑚 thick. The wall is made of a non-magnetic and non-dissipative material. On the other
side of the wall is a receiver located 20cm away.
𝐸𝑟 = √12.98
η_2 = 120π Ω
η_1 = 105 Ω
𝑟𝑎𝑑
𝛽 = 0.64
𝑚
𝜂2 + 𝑗𝜂1 tan(𝛽𝑥)
𝜂𝑖𝑛 = 𝜂1
𝜂1 + 𝑗𝜂2 tan(𝛽𝑥)
120𝜋 + 𝑗105 tan(0.64 ∗ 0.12)
𝜂𝑖𝑛 = 105
105 + 120𝜋 tan(0.64 ∗ 0.12)
Coeficiente de reflexión
𝜂𝑖𝑛 − 𝜂𝑎𝑖𝑟𝑒
┌1 =
𝜂𝑖𝑛 + 𝜂𝑎𝑖𝑟𝑒
𝜂𝑖𝑛 − 𝜂𝑎𝑖𝑟𝑒
┌1 =
𝜂𝑖𝑛 + 𝜂𝑎𝑖𝑟𝑒
𝑇1 = 1 − |┌1 |2
𝑇1 =
𝑅1 = 1 − 𝑇1
𝑅1 =
┌2 =
Transmitancia equivalente a:
𝑇2 = 1 − |┌2 |2
𝑇1 =
La potencia transmitida del generador al receptor se obtiene como producto de las dos transmitancias:
𝑇𝑡 = 𝑇1 ∗ 𝑇2
𝑇𝑡 = 𝑇1 ∗ 𝑇2
Determine en [%] y [mW / m ^ 2] la potencia que se transmite al receptor.
La potencia transmitida del generador al receptor se obtiene como producto de las dos transmitancias:
𝑇𝑡 = 𝑇1 ∗ 𝑇2
𝑇𝑡 =
𝑃2+ = 𝑇𝑃1+
𝑃2+ = 𝑇 ∗ 200𝑚𝑊
𝑚2
𝑚𝑊
𝑃2+ = 𝑚2
Initially the ray travels through the ice layer striking the air layer at point B,
forming an angle of 𝜃𝑎 = 44,9°. Using Snell's Law, calculate step by step the
total path of the wave to determine the value of "d". Note that each layer is
105 𝑚𝑚 thick and that at point C there is a total refractive effect, so it is
necessary to identify which material is in layer 3 by calculating its refractive
index.
𝜂1 sin 𝜃 = 𝜂2 sin 𝜃
𝜂1
sin 𝜃 = sin 𝜃
𝜂2
1.31
sin 𝜃 = sin 45.1
1
sin 𝜃 = 0.9279
𝜃 = sin−1 0.9279
𝜃 = 68.1°
En el punto c existe un efecto de refracción total, esta condición se da cuando Cuando la suma de
los ángulos de incidencia y de refracción es de 90°, tenemos el valor de 𝜃𝑖 = 68.1° por tal motivo
el ángulo de refracción 𝜃𝑟 = 22.9°, el índice de refracción de 𝜂1 = 1, se debe calcular el índice de
refracción de 𝜂2
𝜂1 sin 𝜃 = 𝜂2 sin 𝜃
𝑠𝑖𝑛 𝜃
𝜂2 = 𝜂1
sin 𝜃
𝑠𝑖 𝑛 68.1 °
𝜂2 = 1
21.9°
𝜂2 = 2,48
Conociendo el índice de refracción 𝜂2 = 2,48 podemos decir que el material es el diamante.
Para calcular el ángulo 𝜃𝑏 de la última capa
𝜂1 sin 𝜃 = 𝜂2 sin 𝜃
𝜂1
sin 𝜃 = sin 𝜃
𝜂2
2.48
sin 𝜃 = sin 21.9°
1.54
sin 𝜃 = 0.3729
𝜃 = sin−1 0.3279
𝜃 = 36.9°
Para calcula la trayectoria total de la onda el valor de "d"
𝑑 = ℎ ∗ tan 𝜃𝑟 + ℎ ∗ tan 𝜃𝑟 + ℎ ∗ tan 𝜃𝑟
𝑑 = 10.5𝑐𝑚 ∗ tan 68.1 + 10.5𝑐𝑚 ∗ tan 21.9 + 10.5𝑐𝑚 ∗ tan 36.9
𝑑 = 27.19𝑐𝑚 + 4.2𝑐𝑚 + 7.87𝑐𝑚
𝑑 = 39.26𝑐𝑚
Conclusions
Conclusion 1:
Conclusion 2:
The conclusions should be written with their own words and should focus on the concepts explored, learned, discovered
and practiced in the development of the activity, it is suggested to present a conclusion by topic, the result of learning
obtained as evidence of conceptual assimilation.
To obtain a good writing it is suggested to read the written several times, correcting and adjusting the text until obtaining
a clear and coherent postulate. Avoid superficiality and simplicity.
Bibliography
Paz, A. (2013). Ondas en medios abiertos acotados. Electromagnetismo para ingeniería electrónica. Capítulo 7.
(p.280). Recovered from
https://drive.google.com/drive/folders/1hIcqmguT4nvfzCdYMVpd_DmYOigWM_UI?usp=sharing