Documente Academic
Documente Profesional
Documente Cultură
A. Upgrade version
Overview
We will follow 5 steps to complete the upgrade for MA5600 from current version to
the new one MA5600V300R003C03D029:
1. Check the current version
2. Reduce capacity of packet file
3. Load packet file
4. Load data file
5. Reboot system
6. Check new version
Note:
- Please read detail and careffuly when you follow steps to guaranty your upgrade is
done smoothly.
- Any problem happen during upgrade you have to call to me immediately (Nguyen
Xuan Tuan: 0904331910).
General:
Description: ENGLISH (DEFAULT LANGUAGE)
Version: MA5600V300R002B02D256229
MA5600(config)#display version 0/7
Main Board: H561SCUB
---------------------------------------
PCB Version: H561SCU VER A
Base BIOS Version: 106
Extended BIOS Version: 103
Software Version: MA5600V300R002
Logic Version: (U11)102(U88)102
MAB Version: 0008
SubBoard (0):
PCB version: H531O2GS Ver A
MAB version: 0001
Note: when you display but the version is different than the above one, you can email
or call directly to me for help.
2. Reduce capacity of packet file
Because the packet file is too big (26 Mbps) and can not tranfer in version V300R002,
so we have to reduce capacity of this file lower than 20 Mbps by Packing tool.
In “Please select a license file”, you browe to license file (OR3619.DAT) and click
OK.
Now the tool is running normally.
2.2, Reduce capacity of packet file
Open Packagin Tool:
Click “Open” and choose file scubv3r3c03b029_packet.bin:
We only choose some boards that are suitable and with the current equipment and
capability of extention in the future. After we uncheck some unnecessary board, we
will see some usefull boards below:
Click “Package(P)” button to package the file and save to another file.
Note: When you save file, you must put the file name different with the original one
(scubv3r3c03b029_packet.bin) to keep the original file, for example you can put file
name: scubv3r3c03b029_packet2.bin like above window and click “save”:
Now we finish step 2 and we will work with the new packet file:
scubv3r3c03b029_packet2.bin
You can see in TFTP screen, the file is trafering from laptop to MA5600.
To see the progress, you can type command:
MA5600(config)#display progress load
If the system inform: No such kind of operation is running
Then the load is completed and finish step 4
5. Reboot system
MA5600(config)#reboot
{ Options<E><system,active,standby> }:active
Command:
reboot active
Please check whether data has saved, the unsaved data may lose if reboot
active board, are you sure to reboot active board? (y/n)[n]:y
Standby board failure or not exist, reboot active will cause system reboot,
are you sure to reboot active board? (y/n)[n]:y
MA5600(config)#display language
Local:
Description: CHINESE SIMPLIFIED (DEFAULT LANGUAGE)
Version: MA5600V300R003C03B029
General:
Description: ENGLISH (DEFAULT LANGUAGE)
Version: MA5600V300R003C03B029
MA5600(config)#display io-packetfile information
Version of the board software packetfile: MA5600V300R003C03B029
--------------------------------------------------------------------------
Index File Type Version File Length
--------------------------------------------------------------------------
0 H561AIUG PROGRAM 319 1403776
1 H561AIUG BIOS 109 258176
2 H561SHEA BIOS 309 370816
3 H561SHEA PROGRAM 326 856448
4 H569ADEE BIOS 112 182784
5 H569ADEE PROGRAM 327 1464320
-------------------------------------------------------------------------
B. Do configuration
MA5600>enable
MA5600# config
MA5600(config)#display board 0
(Board will be registered as “Auto_find”, after boards confirmed successfully it will show as
“Normal”)
//confirm boards
MA5600(config)#board confirm 0
Then check status all of boards, the status should be normal
MA5600(config)#sysname AAA.BBB.CCC
Note:
The name must follow rule: AAA.BBB.CCC
This is the colum Shortname in Network Design file
You can access the Network Design of Hai Duong province as an example:
Hai Duong.rar
This name is very important, using to identify sites. Each site has one unique name.
Notice: Fan must be configured for all sites! Otherwise the fan cannot work well.
**Pay attention: At the right top of the FAN, there are some switches marked as S1 to S7,
before configuring FAN, we must switch on S1, S2, S3, and for other switches no need to
care.
7. Add NMS
9. Active adsl user port with the correct line-profile ( Kích hoạt lại - profile 2)
// add the vlan to uplink (uplink only checks the outer vlan)
MA5600 (config)#port vlan 100 0/7 0
MA5600 (config)#port vlan 100 0/7 1
MA5600 (config)#port vlan 100 0/7 2
MA5600 (config)#port vlan 100 0/7 3
MA5600 (config)#port vlan 100 0/7 4
MA5600 (config)#port vlan 100 0/7 5
(This traffic table index will be used in service-port configuration, and car is required to set
as off, note: the priority for internet service is 0)
MA5600 (config)#multi-service-port vlan 100 port 0/x 0-31 vpi 0 vci 35 rx-cttr 7 tx-cttr 7
(configure service-port for slot1 from port 0 to 31, the vlan is 100, and vpi/vci is 0/35, x is
slot number)
......
(Using multi-service-port command can configure virtual channel in batch, one command
can create 32 virtual channels for one slot of adsl board. Traffic table use index 7)
------------------------------------------------------------------------
OBJECT: pitp-pmode MODE: user-defined
CID: anid atm rack.frame.slot.port vpi.vci
-
-
RID:-
------------------------------------------------------------------------
MA5600(config)#save