Documente Academic
Documente Profesional
Documente Cultură
EVENT SPONSOR
PRINCIPAL SPONSOR
ASSOCIATE SPONSORS
CORPORATE SPONSORS
KNOWLEDGE PARTNER
Valves Conference 2015
CONTENTS
1. Programme 2-5
3. Notes 48-59
Content 1
Programme
Confederation of Indian Industry
Programme
Valves Conference 2015
Valves Conference
“Indian Valves Engineered for Global Market”
24 November 2015: Hotel The Lalit, Connaught Place, New Delhi
Programme
0900 – 1000 hrs Registration
Programme 2
Valves Conference 2015
Valves Conference
“Indian Valves Engineered for Global Market”
24 November 2015: Hotel The Lalit, Connaught Place, New Delhi
PLENARY SESSION – I Global Perception challenges and Key Ingredients for Success for the
Indian Valve Industry
Panel discussions
End users and Manufacturer’s come together to discuss and debate
1130 – 1245 hrs the bottlenecks to address and overcome
Mr M Venugopal
Asst. Vice President
Reliance Procurement
Mr Arvind K Goel
Managing Director
AUMA India Pvt. Ltd
Mr G R Gangadhar
Director
Forbes Marshall Pvt. Ltd.
Programme 3
Valves Conference 2015
Valves Conference
“Indian Valves Engineered for Global Market”
24 November 2015: Hotel The Lalit, Connaught Place, New Delhi
PLENARY SESSION – II Industry outlook and End users Expectations from the Industry
1330 – 1500 hrs End users and EPC’s present their views on the future of the
Indian valve Industry and highlight the current status from
their Perspective.
Emerging opportunities, Future demands & projections
Programme 4
Valves Conference 2015
Valves Conference
“Indian Valves Engineered for Global Market”
24 November 2015: Hotel The Lalit, Connaught Place, New Delhi
Programme 5
Confederation of Indian Industry
Speaker Profiles
Valves Conference 2015
“Indian Valves Engineered for Global Market”
24 November 2015: New Delhi
Speaker Profiles
Valves Conference 2015
Arunkumar Janarthanan
Associate Director - Automation & Electronics Practice
Frost & Sullivan
Speaker Profiles 6
Valves Conference 2015
Arvind K Goel
Managing Director
Auma India Private Limited
Mr. Goel has over 30 years of experience in Industry, of which 20 years has been of
heading the companies in the fields of Automotive Components, Electrical Industry
and Aerospace.
Mr Goel is the Managing Director of AUMA India Pvt Ltd., Bangalore for the last 12
years and has been involved in significant growth of the company in this period.
Mr Goel is widely travelled and was Vice Chairman of CII Valves and Actuators
Division from 2010 - 2012 and Chairman from 2012 - 2014.
Speaker Profiles 7
Valves Conference 2015
D K Nayyar
DDG (Standardization)
Bureau of Indian Standard
Speaker Profiles 8
Valves Conference 2015
E S Ranganathan
Executive Director (O&M – CO)
GAIL (India) Limited
Speaker Profiles 9
Valves Conference 2015
Gangadhar R Gubbi
Director
Forbes Marshall
Mr Gangadhar is working with Forbes Marshall for last 30+ years since completing
masters degree in 1984.
Mr Gangadhar has lead the cross functional team as the Chairman of the Steering
Committee and successfully implemented the Oracle R12 ERP System and gone
live in June, 2012
A Member of the Steering Committee for setting up the new greenfield Forbes
Marshall Factory at Chakan near Pune.
A member of the CII Valves and Actuators Division and CII Pune Chapter’s IT-ITES
Division.
Speaker Profiles 10
Valves Conference 2015
K Nandakumar
Chairman And Managing Director
Chemtrols Industries Limited
Through Chemtrols, Mr. Nandakumar made “Brand India” well recognised and
respected in Global Process Analytical arena.
The major Associations where he is associated, in various capacities include –
- Chairman of the Instrumentation and Automation Division of CII
- Director of the Process Plant Manufacturer’s Association (PPMAI)
- Member of the CII MSME National Council
- Member : Governing Council : Capital Goods Skill Council : NSDC, Government
of India
- Member of Capital Goods Committee of FICCI
- Member of the American Institute of Chemical Engineers, since 1981.
Speaker Profiles 11
Valves Conference 2015
K C Rout
Additional Director General of Foreign Trade
Directorate General of Foreign Trade
Department of Commerce
Speaker Profiles 12
Valves Conference 2015
4. Preparing high quality documents: Prepared very high quality papers on India’s
engagements in bilateral/regional trade arrangements with South Asia, South East
Asia, Mercosur (South America), South African Customs Union(SACU), Gulf
Cooperation Council(GCC). At bilateral level, with Pakistan, Nepal, Bhutan,
Thailand & Chile are some of the countries I was involved. These documents were
discussed at the highest level of government and decisions were taken. This also
included presentations(including PPP) for the Cabinet/ TERC/WTO
meetings/GOMs.
Speaker Profiles 13
Valves Conference 2015
K S Goutham
Senior Manager- Applications
Bray Control India Pvt Ltd
Prior to bray he worked at CCI – a world leader in Severe service valves – he has
worked in a aftermarket division as an application manager involved in product
upgrades and replacements. As a part of the global team of application managers
he had travelled extensively to sites in South America and Malaysia to provide
valve solutions. During the span of his experience he was involved in providing
solutions to demanding applications like turbine bypass valves and anti-surge
valves.
Mr Goutham has handled a range of severe service valve products for demanding
application like Turbine Bypass and Anti Surge for Power and Oil & Gas markets.
Speaker Profiles 14
Valves Conference 2015
Madhukar Anand
General Manager, Project Engineering (Mechanical)
NTPC Limited
Mr Anand currently heads the Layout & Piping Group. He was earlier head of mine
planning and design, and material handling groups. He has close to 30 years of
experience in design, planning, feasibility studies, and preparing detailed project
reports and engineering for power plants. He has extensive knowledge of mining,
material handling systems (coal and ash handling), Power plant layouts, Critical &
Station Piping including valves, air conditioning and ventilation systems, and other
plant utilities. He has been involved in the development of key projects including
the N. Karanpura, Khargone Lara, Kudgi ,Gadarwara,Solapur, Meja etc. He has
experience in developing Pakri-Barwadih, Chattti-Bariatu and other mining
projects.He has been actively involved in setting up of NTPC projects in
Bangladesh & Sri Lanka.
Speaker Profiles 15
Valves Conference 2015
M M Chetri
Deputy General Manager - M&I
Indian Oil Corporation Limited
SCOPE Complex, Core-2
7, Institutional Area, Lodhi Road
New Delhi -110003
T : +91 11 24361459
E : m_chetri@indianoil.in
Mr M M Chetri has been in Indian Oil for last 30 years working in Instrumentation
under different capacity. Presently working as DGM (M&I) at Indian Oil ( Refinery
Head Quarter), New Delhi for last three years. Role in M&I is to monitor functioning
of maintenance activities in Indian Oil Refineries and provide guideline to
enhance reliability.
Speaker Profiles 16
Valves Conference 2015
Mummadi Venugopal
Asst. Vice President - Project Procurement
Reliance Industries Limited
Mr Venugopal has widely travelled and visited most of the global valve
manufacturers. He has a good knowledge about various types of valves and
various valve manufacturers.
Speaker Profiles 17
Valves Conference 2015
Nagarajan K
Addl. General Manager, Valves
Bharat Heavy Electricals Ltd
Speaker Profiles 18
Valves Conference 2015
N R Venkatesh
Sr DGM – Design and Development
Ball Valves and R&D
L&T Valves Limited
Speaker Profiles 19
Valves Conference 2015
N V Venkatasubramanian
Chief Executive & Director
L&T Valves Limited
He started his professional career with Larsen & Toubro Limited, Valves Business
Unit, in 1987, and currently he is the Chief Executive of L&T Valves Limited
(erstwhile Audco India Limited – a JV of L&T and Flowserve Corporation of USA), a
wholly owned subsidiary of Larsen & Toubro Limited. He is in the Boards of L&T
Valves Limited, L&T Construction Equipment Limited and L&T Kobelco Machinery
Private Limited as a Director.
L&T Valves Limited is the leading manufacturer of Industrial Valves in India, with a
turnover of over 265 million US Dollar, of which nearly 50% is exported to various
countries in the Oil& Gas and Power markets.
Widely travelled, interacted with many international customers & industry leaders,
and gained good knowledge of the global valves market.
Speaker Profiles 20
Valves Conference 2015
Pramod B Shrawage
Senior Manager – Materials
Solid Fuel SBU, Boiler & Heater Division
Thermax Limited
Mr Pramod B Shrawage have done his Diploma in Mech. Engineering in 1988 from
VJTI, Mumbai. Subsequently completed Part Time Degree in Mech. Engineering
from Wadia College, Pune. He has also done Masters in Management Science
course from Pune University and PGDBM from Nursee Monji Institute of
Management Studies while working in Thermax. He joined Thermax in the year
1988 and since then working in Thermax Materials Management. Currently
heading the Raw Material, Bought Outs & E&I material procurement groups.
Speaker Profiles 21
Valves Conference 2015
Mr Pranay Shanker Garg is the Jt. Managing Director at Advance Valves. He is the
Key driver in establishing the global footprint of Advance Valves as a premier
solution provider to the industry. The focus has been the energy sector with the Oil
& Gas players, getting recognized with the apex Oil Companies across the globe to
forging exclusive strategic ties with premier EPCs. He has traveled extensively,
with a very wide appreciation of regional preferences and cultural expectations.
Mr Garg is an active Advisory Board member of the Oil & Gas, Industrial
Automation chapters of the Chemtech Foundation, and also a member of the ISA &
IEC societies. He is an MBA from Indian Institute of Management, Bangalore
(2002) and graduated in Economics (Hons.) from Sri Ram College of Commerce,
Delhi University.
Speaker Profiles 22
Valves Conference 2015
R Priyamvada
General Manager (E&I)
Engineers India Limited
As EIL nominee she is currently the member of BIS Committee for Industrial
Process Measurement and Control Section, ET-18.
Speaker Profiles 23
Valves Conference 2015
R Ramesh Babu
Managing Director – India
Velan Valves India P Ltd
Mr Babu is currently the Managing Director of Velan India responsible for the India
Business. He has spent 23 years of his career in the Valve Industry setting up
plants to manufacture various types of Industrial valves. He specializes in
Operations Management, Sales and Operations Planning and lean thinking. He
has also served in various positions with Dezurik, TVS Suzuki Sanmar
Engineering and Sundram Fasteners.
Mr Babu is currently the vice chairman of the CII Valves & Actuators Division.
Speaker Profiles 24
Valves Conference 2015
Rangaswamy Senthilvel
Head – Process & Equipment Engineering
Alstom India Pvt Ltd
Mr Senthilvel Joined Alstom on July 2013 in Steam division and working as Head-
Process and equipment engineering.
Before joining Alstom, I have also worked in the boiler manufacturing companies
such as Ansaldo and Thermax Babcock and Wilcox Ltd.
Speaker Profiles 25
Valves Conference 2015
Sanjeev Khasnis
Head Divisional Sourcing Group - B & H Division
Thermax Ltd
Speaker Profiles 26
Valves Conference 2015
Shastri Bhawan
New Delhi-110 001
T : +91 11 23383428
E : samir.biswas@gov.in
Speaker Profiles 27
Valves Conference 2015
Sreedip Biswas
Project Procurement Manager
Bechtel India Private Limited
Have experience in working with major Oil and Gas companies like British
Petroleum, SHELL, GASCO, TPX and Reliance etc.
Prior to joining Bechtel, Sreedip Biswas have worked in MIAL (Mumbai Airport
Project) Mumbai; Thyssen Krupp (UHDE), Mumbai and Hammon Group (GEI).
Achievements
Project Procurement Manager – managed all the procurement functions on
the project including client interaction.
Speaker Profiles 28
Valves Conference 2015
Close co-ordination with engineering, project control, construction and client.
Extensive experience of managing project procurement for Oil & Gas,
Petrochemical, Fertilizer, Chemical, Power plants and Airport.
Strengths
Mr Biswas Experienced in developing Purchasing master pro-forma
documents, procurement execution plan, project procurement procedures,
formation and administration of purchase orders through the several steps of
bidder prequalification, compilation of bid requests, receipt of bids, bid
evaluation, negotiations, e-auction, award, monitoring the performance of
suppliers, backcharge procedures, resolution of claims and disputes, and
other such related steps.
Mr Biswas has experience in working in multi-cultural environment and have
served in Bechtel US office also. He has visited numerous supplier shops
globally for shop surveys and/or shop expediting. He has experience in
procurement of Gas Turbines, HRSG, CFBC Boilers, Steam Turbine,
Columns, Reactors, Fired Heaters, Compressors, Pressure Vessels, Heat
Exchangers, Pumps, Skids, Transformers, Substation (GIS), Critical valves,
Control Valves, Structural Steel, Piping, Electrical and Instrumentation bulks.
He also has experience in design and detailing of various types of equipment
for Oil & Gas and power plants i.e., heat exchangers, air cooled heat
exchangers, pressure vessels and structural steel and is familiar with design
codes such as ASME Section VIII & IX, TEMA. He is also experienced in
selection of rotating equipment, motors and piping bulks.
Speaker Profiles 29
Valves Conference 2015
Sridhar Ramakrishna
Business Manager for International Sales
Auma India Private Limited
Speaker Profiles 30
Valves Conference 2015
Takahide Yago
Chief Engineer
KITZ Corporation
Mr yago designed bellows seal valves and HVAC valves with flow measurement
device, and worked for type approval test such as fire test and fugitive emission
test of industrial ball valves. And also, he was member of development team of new
trunnion mounted ball valves (KITZ global trunnion), contributed to establish new
sealing technologies. Now, he is in charge of technical sales promotion of
industrial ball valves to worldwide distributors and users.
Speaker Profiles 31
Valves Conference 2015
Tejas Parikh
Regional Sales Director
Bray Control India Pvt Ltd
Mr Tejas Parikh , Regional Sales Director has more than 12 years experience in
Sales and Applications of engineering products. He is a Mechanical Engineer, an
MBA and Charter Finance Analyst. He is recipient of Gold Medal in MBA from
honourable Ex- CM of Gujarat and India’s Prime Minister Shree Narendra Modi.
Prior to joining Bray he has spent several years in Sanmar group of companies in
sales and applications of safety relief valves and rupture discs. He is credited for
bringing US MNC, FIBA Tech, in India through a successful Joint Venture for gas
storage and transportation systems during his tenure with an emerging
engineering firm in Vadodara. He has participated in International symposiums,
conferences and training schools in countries like USA and UAE. Successful
achievement of sales target has been his forte over the years
Speaker Profiles 32
Valves Conference 2015
Uma Shanker
Chairman
Advance Valves
Advance Valves always focuses on top tier technology and today manufacturer’s
exclusive range of Balancing Valves, Dual Plate Check Valves, Concentric
Butterfly Valves, High Performance Double Offset and Triple Offset Butterfly
Valves in vast range in terms of Pressure / Temperature ratings, sizes and
metallurgies to suit wide applications including cryogenic. It participates on global
basis alongwith other 2 to 6 prominent vendors.
Speaker Profiles 33
Confederation of Indian Industry
Sponsor Profiles
Valves Conference 2015
“Indian Valves Engineered for Global Market”
24 November 2015: New Delhi
Sponsor Profiles
Valves Conference 2015
L&T Valves is a leader in flow-control solutions for critical services. A wholly owned
subsidiary of L&T, the company leverages its fifty-year heritage of excellence to
manufacture valves for key sectors of the economy such as oil & gas, power,
petrochemicals, chemicals, fertilizers and pharmaceuticals.
Product Range:
• Gate, Globe & Check Valves
• Valves for Power
• Trunnion-mounted Ball Valves
• Process Ball Valves
• Triple-offset Butterfly Valves
• Flanged & Wafer-type Butterfly Valves
• Double Block and Bleed Plug Valves
• Automated & Control Valves
• Customised Solutions
The valves are designed using state-of-the-art 3D design, simulation and analysis
software. Finite Element Analysis (FEA) and Computational Fluid Dynamics
(CFD) are used to fine-tune product performance. Prototypes models are tested -
both in-house and at advanced flow-control research establishments - to ensure
that the valves deliver consistent high performance.
The Quality Management System of L&T Valves is certified to comply with ISO
9001 and API Spec Q1. The company is licensed to offer products monogrammed
API 600, API 6D and API 609 as well as valves with CE Marking (Pressure
Equipment Directive 97/23/EC) and ATEX certification (Council Directive
94/9/EC). Ball and Butterfly Valves with SIL-3 certification (IEC 61508) also are
offered.
Sponsor Profiles 34
Valves Conference 2015
CNC machines and special purpose machines. International safety, health and
environment standards govern every phase of the manufacturing process.
L&T Valves has a marketing network that spans the globe reinforced by strategic
alliance with key international distributors. In India, it has a presence in every
industrial centre through a network of offices, distributors, automation centres and
service franchisees.
Sponsor Profiles 35
Valves Conference 2015
AUMA India is the market leader in the field of Electric Actuation products and is the
largest manufacturer of Electric Actuators and Valve Gearboxes for the
automation of Industrial valves and dampers in the country.
AUMA India shares the proud heritage and proven expertise of the AUMA Group,
Head-Quartered in Germany. A combination of world class, in-house
manufacturing and German engineering, enables AUMA India to offer premium
range of product to market.
Be it power, nuclear, water, petroleum, cement or steel, AUMA India actuators are
at work behind the scene, controlling some of the critical processes in industry.
What’s more, AUMA India also has the widest range of torque solutions from 30
Nm to 720000 Nm.
AUMA India has state-of-the-art manufacturing facility and Sales head office at
Bangalore and Regional Sales offices at Pune, Noida, Kolkata and Chennai with
their strong customer service support network across the length & breadth of the
country.
NANDA C KUMAR – MANAGER (DEP) – BUSINESS ANALYTICS & MARKETING COMMUNICATIONS, AUMA INDIA
Sponsor Profiles 36
Valves Conference 2015
Since then Advance Valves has established its position among the top 5 quality
manufacturers internationally in its product range. Advance Valves is today
considered a pioneer in technology for its Dual Plate Check & Balancing Valves,
and even for its Butterfly Valves, especially in the domestic market.
Advance Valves has introduced world’s first Large Size Balancing Valve, upto size
1000mm(40”), a unique patent pending design, available only from us in the world.
Advance Valves has regularly been supplying its products to the Oil and Gas,
Refineries and Petrochemical, Power, Water, Fertiliser, Steel, and HVAC sectors.
Today, Advance Valves interacts with all the major clients and EPC’s both in the
domestic markets as well as globally.
Advance Valves is considered by its clients – both in the national and international
marketplace – to be amongst the top few vendors in its range of products. This is
because of its:
• Ability to supply valves of exotic metallurgies, including superior Nickel alloys &
Titanium;
• Ability to supply valves of sizes between 50 mm (2”)to 3000 mm (120”) NB.;
• Ability to supply valves upto ANSI 2500, and API 6A;
• Ability to meet client’s stringent quality requirements, including bubble–tight
shutoff;
• Ability to manufacture valves for Cryogenic applications down to -196 deg. C;
• Ability to manufacture valves for Fire-Safe applications up to 550 deg C;
• Ability to manufacture valves complying with Fugitive Emission norms;
• Ability to manufacture valves for Oxygen Application.
• Ability to Supply UL Certified Valves for Fire-Water Service;
• Ability to supply valves with the API 6D & API 609 Monograms;
Sponsor Profiles 37
Valves Conference 2015
Advance Valves specializes in the manufacturing of Dual Plate Check Valves (as
per 594/API 6D), High Performance Metal Seated and Soft Seated Butterfly
Valves (as per API 609) in metallurgies suitable for all petrochemical, sour
services, seawater services, power & chemical, mining, power and oxygen
sectors, amongst other applications. These include offerings in Aluminium Bronze,
Duplex S.S, Titanium, Hastelloy, Alloy 20, Inco Alloy amongst other super alloys.
Our Balancing Valves are considered to be a de-facto standard in the Indian HVAC
sector.
Advance Valves products have been widely accepted and repeatedly used in very
diverse applications, the energy and process industries in particular, and others on
a wider note.
Sponsor Profiles 38
Valves Conference 2015
Option 1
KITZ produces more than 40,000 types of valves for broad range of applications.
We have the complete range of Industrial and commercial valves. KITZ's products
are highly durable, efficient as well as environment-friendly. Our commercial and
Industrial range as below:
Commercial Valves
KITZ Commercial products are essential to the operation of water and sewer
systems, the distribution of hot water, heating, ventilation and air conditioning
equipment, and many other items that are part of daily activities. Many of these
products are made of cast bronze or iron.
• Cast bronze gate, globe, check and ball valves and strainers
• Cast iron gate, globe and check valves
• Cast aluminium butterfly valves
• Cast ductile iron gate, globe, check and ball valves and strainers
• Ductile Iron Butterfly Valves Major Products
Industrial Valves
KITZ industrial valves are widely used in petroleum refineries, chemical and
petrochemical plants, LNG handling facilities, pulp and paper mills, power
generators and other types of plants. Many of these products are made of stainless
steel or carbon steel.
• Cast bronze gate, globe, check and ball valves and strainers
• Cast iron gate, globe and check valves
• Cast aluminium butterfly valves
• Cast bronze gate, globe, check and ball valves and strainers
• Cast iron gate, globe and check valves
• Cast aluminium butterfly valves Major Products
Sponsor Profiles 39
Valves Conference 2015
Sponsor Profiles 40
Valves Conference 2015
VVI manufactures in accordance with the design of Velan Inc, Canada. The
designs of Velan Inc were already established and proven through our supplies in
Indian Industrial sector and Overseas in Power , Oil & Gas and Fertilizers
Chemicals and various process industries .
Based on the design and technical know-how from Velan Inc-Canada , Velan Valve
India Pvt Ltd (VVI) has secured very large supply orders of Cast Steel Gate, Globe
and Check Valves from Reliance Industries and from Velan, USA for the
distribution network in last one and half year.
Sponsor Profiles 41
Valves Conference 2015
The Quality practices and procedure being adopted at Velan Valves India Pvt
Limited is mirror of some of best Velan manufacturing works in Canada and other
location.
All the products manufactured by Velan Valves India are backed with Velan Inc
guarantee. The manufacturing process established in Velan Valves India Pvt
Limited is a replica of Velan Inc, Canada factory.
Sponsor Profiles 42
Valves Conference 2015
VAAS Automation Private Limited; a 100% subsidiary of Bray Controls India Pvt
Ltd & VAAS Knife Edge Gate Valve Group are recent addition in the bucket Bray
Controls India Pvt Ltd
Bray Controls India has been established in the year 2009 as sales office to cater
to the need of higher quality Butterfly Valves, Ball Valves, Knife Edge Gate Valves
and Actuators in India. Looking at the increased demand and growth, Bray has set-
up fully equipped manufacturing facility with high end blended CNC machine in
India and operational from year 2012 at Savli GIDC, Manjusar near Vadodara.
Bray Controls India has two additional manufacturing units at Chennai which are
equipped with most modern manufacturing and testing equipment’s, qualified
engineers and skilled technicians to manufacture and supply world class products.
Throughout the history, Bray has earned a reputation of excellence by creating
products of superior value and world class quality, providing dedicated customer
service and on-time delivery.
Sponsor Profiles 43
Valves Conference 2015
S98(450 Nm-
100000 Nm)
Sponsor Profiles 44
Valves Conference 2015
Sponsor Profiles 45
Valves Conference 2015
We provide products and solutions for steam and energy conservation, optimizing
processes across generation, distribution, utilisation and condensate recovery.
Our energy conservation audits, systems and customised solutions have been
able to save millions of rupees in energy and fuel costs for our customers. We
design and manufacture a wide range of advanced technology instrumentation for
continuous stack emission monitoring, road tunnel atmosphere sensing, and plant
safety equipment that is capable of meeting today’s tough environmental and
legislative demands.
We consistently bring new and innovative products to the market. Several of our
products like the Minimax Modular Boiler, the Effimax (a unique boiler efficiency
monitoring system), the Wireless Trap Monitoring System for remote monitoring of
multi-location traps and the Electronic Compound Regulation Burner Operation
and Control System, have received awards for innovation.
Our core values of Family Spirit, Integrity, Innovation & Entrepreneurship and
Delivering Value not only to our customers, but also to our members and society
make Forbes Marshall a place that puts people first: members, customers,
suppliers, associates and the community.
We are concerned with the community beyond our factory's gate. Since the
inception of the company, sustainable social initiatives have been the key drivers
of our philosophy to contribute and give back to the community in which we
operate. Our diverse and sustained programs support health, education and life
skills development in communities. We also help the community, particularly
Sponsor Profiles 46
Valves Conference 2015
We have been listed several times among the Top 10 “Best Workplaces in India”,
and first in the manufacturing industry by surveys conducted by the Great Place to
Work Institute in association with Economic Times.
Sponsor Profiles 47
Confederation of Indian Industry
Notes
Valves Conference 2015
Notes
Notes 48
Valves Conference 2015
Notes
Notes 49
Valves Conference 2015
Notes
Notes 50
Valves Conference 2015
Notes
Notes 51
Valves Conference 2015
Notes
Notes 52
Valves Conference 2015
Notes
Notes 53
Valves Conference 2015
Notes
Notes 54
Valves Conference 2015
Notes
Notes 55
Valves Conference 2015
Notes
Notes 56
Valves Conference 2015
Notes
Notes 57
Valves Conference 2015
Notes
Notes 58
Valves Conference 2015
Notes
Notes 59
The Confederation of Indian Industry (CII) works to create and sustain an environment
conducive to the development of India, partnering industry, Government, and civil society,
through advisory and consultative processes.
CII charts change by working closely with Government on policy issues, interfacing with
thought leaders, and enhancing efficiency, competitiveness and business opportunities
for industry through a range of specialized services and strategic global linkages. It also
provides a platform for consensus-building and networking on key issues.
Extending its agenda beyond business, CII assists industry to identify and execute
corporate citizenship programmes. Partnerships with civil society organizations carry
forward corporate initiatives for integrated and inclusive development across diverse
domains including affirmative action, healthcare, education, livelihood, diversity
management, skill development, empowerment of women, and water, to name a few.
In its 120th year of service to the nation, the CII theme of Build India - Invest in
Development: A Shared Responsibility, reiterates Industry’s role and responsibility as
a partner in national development. The focus is on four key enablers: Facilitating Growth
and Competitiveness, Promoting Infrastructure Investments, Developing Human Capital,
and Encouraging Social Development.