Documente Academic
Documente Profesional
Documente Cultură
22
Multifunctional with 2 c/o contacts
Data sheet
Features
2CDC 251 054 F0t07
ABB 1
Electronic timer CT-MBS.22
Multifunctional with 2 c/o contacts
Data sheet
Marker label
Remote potentiometer
50 kΩ±20 % ‑ 0.2 Ω, degree of protection IP66
Type Material Diameter in mm Order code
SK 615 562-87 Symbol (see drwg. in data sheet remote potentiometer) GJD6 155 620 R0087
SK 615 562-88 Skale 0 - 10 GJD6 155 620 R0088
MA16-1060 Skale 0 - 30 1SFA 611 940 R1060
Application
The CT‑S range timers are designed for use in industrial applications. They operate over a universal
range of supply voltages and a large time delay range, within compact dimensions. The easy‑to‑set
front‑face potentiometers, with direct reading scales, provide accurate time delay adjustment.
Multifunction timers are ideally suited for service and maintenance applications, because one device can
replace a number of time relays with different functions, voltage and time ranges. This reduces inventory
and saves money.
Operating mode
The CT‑MBS.22 with 2 c/o contacts offers 10 timing functions. The function is rotary switch selectable
on the front of the unit. Each function is indicated by an international function symbol.
One of 10 time ranges, from 0.05 s ‑ 300 h, can be selected with an other rotary switch. The fine adjust‑
ment of the time delay is made via an internal potentiometer, with a direct reading scale, on the front
of the unit. When an external potentiometer is connected to terminals Z1‑Z2, the internal adjustment is
disabled and external adjustment is enabled.
By means of a front‑face rotary switch, the function of the 2nd c/o contact can be set to instantaneous
contact.
Timing is displayed by a flashing green LED labelled U/T.
2 ABB
Electronic timer CT-MBS.22
Multifunctional with 2 c/o contacts
Data sheet
Function diagrams
Remarks
Legend:
G Control supply voltage not applied / Output contact open
B Control supply voltage applied / Output contact closed
Y1‑Z2 Control input with volt‑free triggering
A ON‑delay
This function requires continuous control supply voltage for timing.
If control input Y1‑Z2 is open, timing begins when control supply voltage is applied. Or, if control supply
voltage is already applied, opening control input Y1‑Z2 also starts timing. The green LED flashes during
timing. When the selected time delay is complete, the output relay energizes and the flashing green LED
turns steady.
If control input Y1‑Z2 closes before the time delay is complete, the time delay is reset and the output
relay remains de‑energized.
If control supply voltage is interrupted, the output relay de‑energizes and the time delay is reset.
A1-A2
2CDC 252 162 F0206
Y1-Z2
15-18, 25-28
15-16, 25-26
21-24
21-22
green LED
t t
ABB 3
Electronic timer CT-MBS.22
Multifunctional with 2 c/o contacts
Data sheet
Function diagrams
B OFF‑delay with auxiliary voltage
This function requires continuous control supply voltage for timing.
If control input Y1‑Z2 is closed, the output relay energizes immediately. If control input Y1‑Z2 is opened,
the time delay starts. The green LED flashes during timing. When the selected time delay is complete,
the output relay de‑energizes and the flashing green LED turns steady.
If control input Y1‑Z2 closes before the time delay is complete, the time delay is reset and the output
relay does not change state. Timing starts again when control input Y1‑Z2 re‑opens.
If control supply voltage is interrupted, the output relay de‑energizes and the time delay is reset.
A1-A2
A1-A2
t1 = adjusted ON-delay
t2 = adjusted OFF-delay
t1 = t2
CA Impulse‑ON
This function requires continuous control supply voltage for timing.
The output relay energizes immediately when control supply voltage is applied and de‑energizes after
the set pulse time is complete. If control input Y1‑Z2 is open, timing begins when control supply voltage
is applied. Or, if control supply voltage is already applied, opening control input Y1‑Z2 starts timing. The
green LED flashes during timing. When the selected pulse time is complete, the output relay de‑energiz‑
es and the flashing green LED turns steady.
Closing control input Y1‑Z2, before the pulse time is complete, deenergizes the output relay and resets
the pulse time.
If control supply voltage is interrupted, the output relay de‑energizes and the time delay is reset.
A1-A2
2CDC 252 164 F0206
Y1-Z2
15-18, 25-28
15-16, 25-26
21-24
21-22
green LED
t t
4 ABB
Electronic timer CT-MBS.22
Multifunctional with 2 c/o contacts
Data sheet
Function diagrams
CB Impulse‑OFF with auxiliary voltage
This function requires continuous control supply voltage for timing.
If control supply voltage is applied, opening control input Y1‑Z2 energizes the output relay immediately
and starts timing. The green LED flashes during timing. When the selected pulse time is complete, the
output relay de‑energizes and the flashing green LED turns steady.
Closing control input Y1‑Z2, before the pulse time is complete, de‑energizes the output relay and resets
the pulse time.
If control supply voltage is interrupted, the output relay de‑energizes and the time delay is reset.
A1-A2
A1-A2
A1-A2
2CDC 252 032 F0206
Y1-Z2
15-18, 25-28
15-16, 25-26
21-24
21-22
green LED
t t t t
ABB 5
Electronic timer CT-MBS.22
Multifunctional with 2 c/o contacts
Data sheet
Function diagrams
H Pulse former
This function requires continuous control supply voltage for timing.
Closing control input Y1‑Z2 energizes the output relay immediately and starts timing. Operating the
control contact switch Y1‑Z2 during the time delay has no effect. The green LED flashes during timing.
When the selected ON time is complete, the output relay de‑energizes and the flashing green LED turns
steady. After the ON time is complete, it can be restarted by closing control input Y1‑Z2.
If control supply voltage is interrupted, the output relay de‑energizes and the time delay is reset.
A1-A2
G ON/OFF‑function
This function is used for test purposes during commissioning and troubleshooting.
If the selected max. value of the time range is smaller than 300 h (front‑face potentiometer “Time sector”
not 300 h), applying control supply voltage energizes the output relay immediately and the green LED
glows. Interrupting control supply voltage, de‑energizes the output relay.
If the selected max. value of the time range is 300 h (front‑face potentiometer “Time sector” = 300 h) and
control supply voltage is applied, the green LED glows, but the output relay does not energize.
Time settings and operating of the control inputs have no effect on the operation.
A1-A2
A1-A2
2CDC 252 039 F0206
15-18
15-16
25-28
25-26
green LED
t1 t2
6 ABB
Electronic timer CT-MBS.22
Multifunctional with 2 c/o contacts
Data sheet
Examples of application
Star‑delta change‑over
Control circuit diagram
95
F2
96
S1 21
0
22
S2 13 53
I K2
14 54
15 25 13 13
K1T K2 K1
18 28 14 14
22 22
K3 21
K1 21
A1 A1 A1 A1
K1T K1 K3 K2
A2 A2 A2 A2
N
Y N
Star‑delta change‑over
Power circuit diagram
2CDC 252 012 F0b07
L1 L2 L3
1 3 5
-F1
2 4 6
1 3 5 1 3 5 1 3 5
-K2 2 4 6
-K3 2 4 6
-K1 2 4 6
1 5 4 97 95
-F2 98 96
3 2 6
-M1
W1 W2
V1 M V2
U1 3~ U2
Connection diagram
A1 15
2CDC 252 007 F0b06
25 21
Z2 Z1 15‑16/18 1. c/o contact
25
A1 15 21
21‑22/24 2. c/o contact as instantaneous contact
25‑26/28 2. c/o contact
A2 16 18 26
22
28
24 A1‑A2 Rated control supply voltage US
28 24 26 22 Y1
18 16 A2 24‑48 V DC or 24‑240 V AC
Y1‑Z2 Control input
Z1‑Z2 Remote potentiometer connection
ABB 7
Electronic timer CT-MBS.22
Multifunctional with 2 c/o contacts
Data sheet
Wiring instructions
Control input
(volt‑free triggering)
L(+)
A2 Z2
N(-)
Remote potentiometer
L(+)
2CDC 252 136 F0b06
A1 Z1
A2 Z2
N(-)
L(+) +V
2CDC 252 105 F0b06
A1 Y1
A2 Z2
N(-) 0V
8 ABB
Electronic timer CT-MBS.22
Multifunctional with 2 c/o contacts
Data sheet
Technical data
Data at Ta = 25 °C and rated values, unless otherwise indicated
Input circuits - Supply circuit 1SVR 630 010 R3200
Rated control supply voltage US A1‑A2 24‑48 V DC
A1‑A2 24‑240 V AC
Shield connection Z2
Impulse‑ON
Pulse former
ON/OFF‑function
ABB 9
Electronic timer CT-MBS.22
Multifunctional with 2 c/o contacts
Data sheet
DC12 (resistive) at 24 V 4A
DC13 (inductive) at 24 V 2A
10 ABB
Electronic timer CT-MBS.22
Multifunctional with 2 c/o contacts
Data sheet
Rated impulse withstand voltage Uimp between all isolated circuits 4 kV; 1.2/50 µs
(IEC/EN 60664‑1, VDE 0110)
Power‑frequency withstand voltage test between all isolated circuits routine test: 2.0 kV; 50 Hz, 1 s
(test voltage) type test: 2.5 kV; 50 Hz, 1 min
Basic insulation (IEC/EN 61140) input circuit / output circuit 500 V
Protective separation (IEC/EN 61140; input circuit / output circuit 250 V
VDE 0106 part 101 and part 101/A1)
Pollution degree 3
(IEC/EN 60664-1, VDE 0110, UL 508)
Overvoltage category III
(IEC/EN 60664-1, VDE 0110, UL 508)
ABB 11
Electronic timer CT-MBS.22
Multifunctional with 2 c/o contacts
Data sheet
12 ABB
Electronic timer CT-MBS.22
Multifunctional with 2 c/o contacts
Data sheet
Technical diagrams
Load limit curve
DC voltage [V]
resistive load
resistive load
Derating factor F
1.0
2CDC 252 124 F0206
Derating factor F
0.9
0.8
0.7
0.6
0.5
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
cos ϕ
Contact lifetime
2CDC 252 148 F0206
Switching cycles
250 V
resistive load
Dimensions
in mm
109,5 4.31“ 22,5
.886“
102 4.02“
2CDC 252 188 F0b05
78 3.07“
100 3.94“
CT-MBS.22
ABB 13
Electronic timer CT-MBS.22
Multifunctional with 2 c/o contacts
Data sheet
Dimensions accessories
in mm
0.394”
0.787”
10
20
60 2.362”
70 2.756”
7 .275”
2CDC 252 185 F0005
22,5
3,5 .138”
.886”
68,5 2.70 ”
front-to-back
size 107
3A11
.315”
8
20
.787”
Remote potentiometer
14 ABB
Electronic timer CT-MBS.22
Multifunctional with 2 c/o contacts
Data sheet
Synonyms
Further documentation
Electronic Products and Relays Technical catalogue 2CDC 110 004 C020x
CT-AHS, CT-ARS, CT-MBS, CT-MFS Instruction manual 1SVC 630 010 M0000
Remote potentiometer for CT-S Data sheet 2CDC 111 108 D0201
range time relays
ABB 15
Contact us
Note:
We reserve the right to make technical changes or
modify the contents of this document without prior
notice. With regard to purchase orders, the agreed
particulars shall prevail. ABB AG does not accept
any responsibility whatsoever for potential errors or
possible lack of information in this document.