Documente Academic
Documente Profesional
Documente Cultură
-->
Home About Us Products IS Code & Guidelines Clients & Gallery FAQ Contact Us
http://paversindia.com/iscode.html#cross 1/3
3/13/2019 Different Type Pavers Block Thickness Dimensions
S.No. Dimensions Measurement Method, Ref to Recommended Value Tolerance Limit for Paver
Block
Thickness Thickness
100 mm 100 mm
(1) (2) (3) (4) (5) (6)
i) With, W Annex B To be specified by ± 2 mm ± 3 mm
manufacturere
ii) Length L Annex B To be specified by ± 2 mm ± 3 mm
manufacturere
iii) Thickness, T Annex B 50 to 120 mm ± 3 mm ± 4 mm
iv) Aspect Ratio Annex B Maximum : 4.0 +0.2 + 0.2 (L/T)
v) Arris/chmfer Annex B Maximum : 5 mm ± 1 mm ± 1 mm
Minimum : 7 mm
vi) Thickness of 6.2.3 Maximum : 6 mm + 2 mm + 2 mm
wearing layer
vii) Plan Area Asw Annex B Maximum : 0.03 m2 +0.001m2 +0.001m1
viii) Wearing area, Annex B Maximum 75 percent of -1 percent -1 percent
Asw plan Area
http://paversindia.com/iscode.html#cross 2/3
3/13/2019 Different Type Pavers Block Thickness Dimensions
80-100
Commerccial Traffic Axle Load Blocks 80-100
20-40
Repetitions 20-50 msa Sand Bed 20-40
250
Arterial Streets WBM/WMM Base 250
150
Or WBM/WMM Base 150
75
and DLC Over it* 75
250
Granular Sub-base 200
Note : 1. A Typical cross section of block pavement for heavily trafficked roads
http://paversindia.com/iscode.html#cross 3/3