Sunteți pe pagina 1din 4

Soal MTCNA AKU

[Back To Main Menu]


Translate to Bahasa indonesia : OFF

00:17:59
last save: 2015-10-03 06:02:31
1. Netinstall can be used to
A. Install package for different hardware architecture
B. Install different software version (upgrade or downgrade)
C. Reinstall software without losing licence
D. Keep configuration, but reset a lost admin password
2. RouterOS DHCP server is able to send any DHCP options (specified in RFCs) to DHCP
clients

3. Each queue in HTB has two rate limits, except:


A. MIR
B. TIR
C. CIR
4. The total-max-limit under Simple Queues will limit the combined upload and download of
the target-address of your simple queue.

5. Can you manually add drivers to RouterOS in case your PCI Ethernet card is not
recognized, and you suspect it is a driver issue?
A. No
B. Yes
6. Which tunneling protocol can be created only between two RouterOS devices?

A. EOIP
B. GRE
C. L2TP
D. PPTP
E. IPIP
7. Which rule is used to block SMTP protocol from Lan interface for clients?
A. /ip firewall filter add chain=input protocol=tcp dst-port=25 action=drop in-
interface=Lan
B. /ip firewall filter add chain=output protocol=tcp dst-port=25 action=drop in-
interface=Lan
C. /ip firewall filter add chain=forward dst-port=25 action=drop in-interface=Lan
D. /ip firewall filter add chain=forward protocol=tcp dst-port=25 action=drop in-
interface=Lan
8. Router A and B are both running as PPPoE servers on different broadcast domains of your
network. It is possible to set Router A to use "/ppp secret" accounts from Router B to
authenticate PPPoE customers.

9. Simple Queue number 0 defines 2M for upload and download for target IP 10.10.0.33.
Simple Queue number 1 defines 4M for upload and download for target IP 10.10.0.33. Client
10.10.0.33 is be able to obtain
A. 2M upload/download
B. 0M upload/download
C. 4M upload/download
D. 6M upload/download
10. Same IP address can be included in multiple address-lists, and these lists can be used
separate from one another.

11. An IP address pool can contain addresses from more than one subnet.

12. What is the minimal possible wireless configuration to create an Access Point?
A. band
B. mode
C. frequency
D. radio name
E. scan-list
F. WDS
G. DFS mode
H. ssid
13. There are two routes in the routing table:
0 dst-addr=10.1.1.0/24 gateway=5.5.5.5
1 dst-addr=10.1.1.4/30 gateway=5.6.6.6

Which gateway will be used to get to the IP address 10.1.1.6?


A. both - half of the traffic will be routed through one gateway, half through the other
B. the required route is not in the routing table
C. 5.5.5.5
D. 5.6.6.6
14. You wish to secure your RouterOS system. You do not want the RouterOS to be
discoverable using MNDP or CDP. You also want to deny management via the MAC
addresses on all interfaces. Select the correct actions to accomplish this.

A. Place a proper input firewall rule to block mac discovery


B. Add a Deny All input firewall rule
C. Remove/Disable all discovery interfaces
D. Remove/Disable all interfaces under mac-server telnet
E. Place a proper forward firewall rule to block mac discovery
F. Remove/Disable the Interfaces
G. Remove/Disable all interfaces under mac-Server winbox
15. It is required to make a web server on a private LAN visible on the Public Internet. Only
the web server port should be visible to the public. Which of the following configuration
steps must be met. (select all that apply)
A. Connection Tracking must be enabled on NAT router
B. A route between the NAT Router and the webserver must exist
C. Public IP address of the webserver must be installed on the NAT Router
D. in ip firewall NAT there should be a dst-nat between the public ip of the router and
the private ip of the webserver
E. LAN address of the webserver should be routable on the internet
16. A station can connect to AP if they both use different country regulation settings, but the
frequency chosen is allowed in both countries

17. What kind of users are listed in the Secrets window of the PPP menu?
A. pppoe users
B. pptp users
C. winbox users
D. wireless users
E. l2tp users
F. hotspot users
18. Which options are correct ?
A. DST-NAT to redirect all packets to router itself
B. DST-NAT to define new destination address in our local network for incoming
packets
C. SRC-NAT to prevent access from outside to our local network clients
D. SRC-NAT to prevent local network clients access to outside
19. In order to use dynamic keys in your security profile for an AP, you MUST set up the
dhcp server to provide the dynamic keys.

20. How long is level 1 (free) license valid?


A. 1 month
B. 24 hours
C. Infinite time
D. 1 year
21. Wireless clients (mode=station) will work properly if bridged to ethernet

22. If 'check-gateway' option is enabled on one route it will affect all routes with the same
gateway:

23. When viewing the routes in Winbox, some routes will show "DAC" in the first column.
These flags mean:

A. Dynamic,Available,Created
B. Direct,Available,Connected
C. Dynamic,Active,Console
D. Dynamic,Active,Connected
24. It is possible to have PPTP Client and PPTP server on one MikroTik router at the same
time.

25. For static routing functionality, additionally to the RouterOS 'system' package, you will
also need the following software package:
A. no extra package required
B. routing
C. advanced-tools
D. dhcp

© Mikrotik : RouterBOARD : Forum : MUM : Training : Wiki : Newsletters : Twitter

S-ar putea să vă placă și