Sunteți pe pagina 1din 7

Department of Mechanical and Automation Engineering

Amity School of Engineering and Technology


Amity University Madhya Pradesh, Gwalior

Declaration

I, Vivek Singh Bhadoriya, student of Bachelor of Technology in Mechanical and


Automation Engineering hereby declare thatthe practicaltraining report entitled
“MANUFACTURING OF SOAPS” which is submitted by me to Department of
Mechanical and Automation Engineering, Amity School of Engineering &
Technology, Amity University Madhya Pradesh, in partial fulfillment of the
requirement for the award of the degree of Bachelor of Technology in Mechanical
and Automation Engineering, has not been previously formed the basis for the
award of any degree, diploma or other similar title or recognition.

Vivek Singh Bhadoriya


Date: (Enrollment No. A60205416008)

i
Department of Mechanical and Automation Engineering
Amity School of Engineering and Technology
Amity University Madhya Pradesh, Gwalior

CERTIFICATE

This is to certify thatVivek Singh Bhadoriya(Enrollment N0. A60205416008), student


of B.Tech(MAE)Vsemester, Department of Mechanical and Automation Engineering,
ASET, Amity University Madhya Pradesh, has done his practicaltraining entitled
“MANUFACTURING OF SOAPS” under my guidance and supervision during “26 May
2018 – 7July 2018”

The work was satisfactory. He has shown complete dedication and devotion to the given
project work.

Date:

(Mr.Arvind Singh Tomar)


Assistant Professor External Examiner

(Mr.Nasir Khan)
Head of the Department

ii
iii
Acknowledgement

Iam very much thankful to our honorable Vice Chancellor Lt Gen. V. K. Sharma AVSM
(Retd) for allowing us to carry out my practical training. I would also like to thank Prof.
(Dr.) M. P. Kaushik, Pro-Vice Chancellor, Amity University Madhya Pradesh for his
support.

I extend my sincere thanks to Maj. Gen. (Dr.) S. C. Jain, VSM** (Retd), HOI, Amity
School of Engineering and Technology, Amity University Madhya Pradesh, Gwalior for
his guidance and support for the selection of appropriate industry for my practical training.
I would also like to thank Prof.(Mr.) Nasir Khan Head of Department (MAE), for his
kind concern throughout the practical training.

I am also very grateful to Mr. Arvind SinghTomar, Assistant Professor, Department of


Mechanical and Automation, Amity School of Engineering and Technology, Amity
University Madhya Pradeshand Mr. Shailendra Singh, GODREJ CONSUMER Pvt. Ltd.
my internal and external supervisor respectively, for their constant guidance and
encouragement provided in this endeavor.

I am also thankful to the whole staff of GODREJ CONSUMER Pvt. Ltd. for the co-
operation and giving mefriendlyenvironment which made very comfortable for learning
and that of ASET, AUMP for teaching and helping me always. Last but not the least I
would like to thank my parents and friends for their constant support.

Vivek Singh Bhadoriya


(Enrollment No. -A60205416008)

iv
ABSTRACT

Soap is producing and the characteristics of the soap is contrasted and a synthetics
detergent. Soap is readied utilizing vegetable oil, ethanol and sodium hydroxide. These
reagents are combined and warmed up until the point when the soap framed. After the soap
performed, the soap is being cooled in the water shower before being tried. There are two
examinations done in comparing soap and detergent which are precipitation and
emulsification test. Each test yields a variety of results. For precipitation test, soap and
detergent are tried utilizing a couple of drops of HCl until the pH of the arrangement is
equivalent to 3. The quantity of drops used to get the estimation of 3 is counted. For
emulsification test, each soap and detergent are tried with different sorts of arrangements
with the end goal to decide the emulsification impact. The arrangements which are
emulsified by either soap or detergent will play out a solitary layer. Every one of the
information are accumulated and recorded.

Keywords:Soaps, Detergent, Sodium Hydroxide.

v
LIST OF FIGURES

Figure No. Figure Caption Page No.


Figure1.1 Soap 1
Figure2.4 Detergent 4
Figure2.1 Manufacturing process of soap 9

vi
LIST OF ABBREVIATIONS

S.No. Terms Expanded Form


1 B.C Before Christ
2 A. D Anno Domini
3 Na Sodium
4 K Potassium

vii

S-ar putea să vă placă și