Sunteți pe pagina 1din 2

ROHI International Complete Fastener Solutions

Hexagon Head Bolts / Screws DIN 931/933


Metric Series - Dimensions

Note:

1. The bolts and screws will generally


conform to ISO 4014, ISO 4017 and
DIN 931/933.
2. Threads will conform to Class 6g of
ISO 965/2 Coarse Series.
3. Material: High grade carbon/alloy
steel.
4. Heat Treatment: Property Class 8.8
or 10.9 *
5. Thread Length LT:
LT1 for L ≤ 125
LT2 for L > 125 to 200
LT3 for L > 200
6. Screw length equal to or shorter
than those listed in column ‘LFT’
will be fully threaded.
7. Sizes in brackets are non-preferred
standards.
8. All dimensions are in millimeters.

Nominal Length of Thread


W C Length
Thread Pitch B Max. H Nom. R Min.
Max. Min. LT1 LT2 LT3 LFT Range
Size
M6 1.0 10.0 11.05 6.0 4.0 0.25 18 - - 25 15 - 100
M8 1.25 13.0 14.38 8.0 5.3 0.4 22 28 - 30 15 - 100

M10 1.5 17.0 16.0 18.90 17.80 10.0 6.4 0.4 26 32 45 35 15 - 100
M12 1.75 19.0 18.0 21.10 20.03 12.0 7.5 0.6 30 36 49 40 20 - 150
(M14) 2.0 22.0 21.0 24.49 23.35 14.0 8.8 0.6 34 40 53 45 25 - 150

M16 2.0 24.0 26.75 16.0 10.0 0.6 38 44 57 50 25 - 200


(M18) 2.5 27.0 30.14 18.0 11.5 0.6 42 48 61 60 35 - 200
M20 2.5 30.0 33.53 20.0 12.5 0.8 46 52 65 60 35 - 200

(M22) 2.5 32.0 34.0 35.72 37.72 22.0 14.0 0.8 50 56 69 65 40 - 200

M24 3.0 36.0 39.98 24.0 15.0 0.8 54 60 73 75 40 - 200


(M27) 3.0 41.0 45.20 27.0 17.0 1.0 60 66 79 85 70 - 200
M30 3.5 46.0 50.85 30.0 18.7 1.0 66 72 85 85 75 - 300
(M33) 3.5 50.0 55.37 33.0 21.0 1.0 72 78 91 95 75 - 300
M36 4.0 55.0 60.79 36.0 22.5 1.0 78 84 97 100 80 - 300
M39 4.0 60.0 66.44 39.0 25.0 1.0 84 90 103 110 90 - 300
M42 4.5 65.0 72.02 42.0 26.0 1.2 90 96 109 120 90 - 300

Dimensions in accordance with revised standards - in the process of being implemented.


* Also can be supplied in 5.8 and 6.8 as special.

4
ROHI International Complete Fastener Solutions

Physical Properties:

PROPERTY CLASS 5.8 6.8 8.8 10.9


Diameter All Diameters All Diameters ≤M16 >M16 All Diameters
2 2 2 2 2
Unit N/mm N/mm N/mm N/mm N/mm
Tensile Strength, (Min.) 520 600 800 830 1040
Yield Strength, 0.2% offset (Min.) 420 480 640 660 940
Proof Load Stress 380 440 580 600 830
Shear Strength, (Min.) 300 360 480 498 624
Hardness
HR B82 - B99.5 B89 - B99.5 C22 - C32 C23 - C34 C32 - C39
Rockwell
Elongation % on GL= 5.65 √A (Min)
10 8 12 9
A = Cross Sectional Area.

Recommended Tightening Torques and Induced Loads:

5.8 * 6.8 * 8.8 10.9


Nominal Stress
Area Induced Induced Induced Induced
Thread Torque Torque Torque Torque
Load Load Load Load
Size
2
mm Nm N Nm N Nm N Nm N
M6 20.1 6.42 5,348 7.43 6,188 10.3 9,005 15.1 13,230
M8 36.6 15.57 9,736 18.03 11,270 25.0 16,400 37.0 24,080
M10 58.0 30.85 15,428 35.70 17,850 50.0 26,360 74.0 38,700
M12 84.3 53.82 22,424 62.33 25,970 87.0 38,300 128.0 56,300
(M14) 115.0 85.65 30,590 99.18 35,420 139.0 52,300 205.0 76,800
M16 157.0 133.64 41,762 154.78 48,370 214.0 72,300 315.0 106,300
(M18) 192.0 183.86 51,072 212.94 59,150 304.0 91,200 435.0 129,900
M20 245.0 260.68 65,170 302.40 75,600 431.0 116,400 615.0 165,800
(M22) 303.0 354.63 80,598 409.64 93,100 586.0 144,000 835.0 205,100
M24 353.0 450.24 93,898 520.80 108,500 745.0 167,700 106.00 238,700
(M27) 459.0 657.72 122,094 763.56 141,400 109.00 218,100 155.00 310,400
M30 561.0 894.60 149,226 1037.40 172,900 148.00 266,600 210.50 379,400
(M33) 694.0 1219.68 184,604 1409.10 213,500 201.30 329,800 286.50 469,300
M36 817.0 1562.40 217,000 1809.36 251,300 258.60 388,200 368.00 552,500
(M39) 976.0 2025.66 259,700 2342.34 300,300 334.60 463,800 476.00 660,000
M42 1120.0 2502.53 297,920 2897.66 344,960 413.50 532,200 588.00 757,400
Note: * Special
The Tightening Torques are calculated to induce approximate stresses as detailed below:
2
266 N/mm for Property Class 5.8
2
308 N/mm for Property Class 6.8
2
448 N/mm for Property Class 8.8, dia ≤ M16
2
462 N/mm for Property Class 8.8, dia ≤ M16
2
658 N/mm for Property Class 10.9

S-ar putea să vă placă și