Documente Academic
Documente Profesional
Documente Cultură
Assignment No 1
Grade: AA / AB / BB / BC / CC / CD /DD
CO1; Draw the curves of intersection of solids and true shape of inclined surface.
CO2: Draw the standard conventions of machine elements used in engineering practice.
Syllabus Module covered: 1
Q2. An equilateral triangular prism of 70mm side of base and 90mm height has its base on HP. And one
of the rectangular face perpendicular to VP. It is completely penetrated by another equilateral triangular prism
of 40mm side and 90 mm length of axis. The axis of smaller prism is parallel to both HP and VP and bisects
the axis of vertical prism. One of the rectangular faces of horizontal prism is parallel to VP and away from
observer. Draw three views.
Assignment No 2
Grade: AA / AB / BB / BC / CC / CD /DD
Mapping with Signature of the Staff In-charge with date: Course Outcome
CO3: Analyze the field of application of given machine and also the functional requirement of
individual parts.
CO4: Draw part drawings and assembly drawing of machine using CAD software
Syllabus Module covered: 2
Prepare an assembly of Bush pin type flexible coupling from given parts
Assignment No 3
CAMD /Sem IV BSS JAN_APR 2018
Grade: AA / AB / BB / BC / CC / CD /DD
CO3: Analyze the field of application of given machine and also the functional requirement of
individual parts.
CO4: Draw part drawings and assembly drawing of machine using CAD software
Syllabus Module covered:3
Figure shows an assembly of Plummer block. Prepare part drawing of all parts with part list
Assignment No 4
Grade: AA / AB / BB / BC / CC / CD /DD
Figure shows an assembly of Non- return valve. Draw part drawing of all given parts
Assignment No 5
Grade: AA / AB / BB / BC / CC / CD /DD
Details of the Drill Jig are given. Prepare an assembly of given parts (Part list must be shown in assembly
drawing)
Assignment No 6
Grade: AA / AB / BB / BC / CC / CD /DD
PART-B
Refer Part A questions and draw the given drawing using Autodesk inventor.