Documente Academic
Documente Profesional
Documente Cultură
Congratulations on purchasing your HIFI WALKER H2 1. Battery 1. Category Access all your music files from here. Gain: Memory play: a. Press Next/Previous button to adjust the backlight time.
Battery will be fully charged in approximately 4 hours on a Press Play/Pause to enter the Music Category. OTG Press Play/Pause to select Choose your memory play position from: b. The default time is 30 seconds.
To use HIFI WALKER H2, you put songs and other audio files You will see: Connect an external USB drive via USB-OTG cable - High gain output -Last song. - Brightness
wall charger. If charging on a computer or other devices, the
on your H2's MicroSD card. Songs: - Low gain output The next time you power on H2, it will start playing from the - Idle Shutdown Time;
charging time varies as the input differs on each device.
Press Next/Previous to select music file and press Play/Pause 3. Setting This is to ensure you have the best experience when paring beginning of the song you were listening before powered off. a. Press Next/Previous to adjust the time to let H2
Use H2 to: to play Press Play/Pause to enter. H2 with earphones, headphones, or amplifier. -Last poition automatically turn off when no operation.
2. Power On/Off
-Sync songs and playlists (*.m3u/*.m3u8 format only) for My favorite: You will see: The default setting is low. H2 will start playing from the location of the song when you b. The default setting is 5 minutesScheduled Power off time
Press and hold the Power button to turn on the H2. The blue
listening on the go You will see your favorite music from here Music Scan: previously powered off.
status light will light up once turned on.
-Store or back up files and other data, using H2 as an Playlist: Scan the entire Micro SD card and build your music library. Replay Gain -Off. Bluetooth:
Press and hold to turn off.
external disk Your *.m3u playlist file will be displayed from [Explorer], not -Automatic: Scan will be automatically activated every time - Track: Volume will be the same for all music files. The H2 supports bi-directional (2-way) Bluetooth feature.
3. Lock Mode here. We apologize for the misleading menu title. This will be you insert your Micro SD card. - Album: Volume will be the same within each album. Volume set: You can either use H2 as a portable amplifier to receive
What's in the box? deleted from the [Category] and will be moving to [Explorer] -Manually: Scan will be activated only when you manually Enter to set the volume. Bluetooth music from your other device or as a sender to
Press the Power button to lock the device. The screen will be
1*HIFI WALKER H2 HIFI Digital Audio Player turned off and all buttons will be locked except the Power in the next firmware update. ask H2 to scan your Micro SD card. Balance: -Memory: keep using your previous volume. send the music to your Bluetooth speaker.
1*Micro USB cable button. Recent played songs: Press and hold the Menu button in the Music Scan section. Press Previous or Next to adjust the left and right channel -Default: the default volume is 30
1*HIFI WALKER Hi-Res Earphone A2 Records of 50 most recent played songs will be shown in here Once you release the Menu button, the player will activate balance. - Bluetooth scaning: Press Next/Previous to select your target
1*User Manual 4. Reboot the player Album (ID3 tag info required) : music scan. 4. System Setting device. Then, press Play/Pause to connect the device. When
If the player freezes, press and hold the Power button for 8 Enter to select your favorite Album. Lyric: Press Play/Pause to enter System Settings. successfully connected, H2 will display “Connected” next to
H2 HIFI Digital Audio Player sec to reboot the player. All settings will be reset to the Genre (ID3 tag info required) : Equalizer: The default setting is On. You will see: your Bluetooth device.
factory settings. Enter to select your favorite Genre. Press Play/Press to select your favorite EQ style. The name of *.lrc file and the music file must be the same. Language: - Paired device: Press Next/Previous to see your connected
User Manual Artist (ID3 tag info required) : The H2 includes: For e.g., you should have testsong111.lrc and testsong111. The H2 supports Multilanguage: devices. You can also reconnect your device from here.
1.Power button 9.Back
2.Volume Up 10.Line out port Enter to select your favorite Artist. - Rock - Classic - Jazz - Pop - Dance - Vocal mp3 or testsong111.wav or testsong111.flac or testsong111. -English -German -French -Italian - Available devices: you can see all available Bluetooth
3.Volume Down 11.Micro USB port Clear record: - Blues - Heavy Metal - Custome - Off ape to successfully display the lyric. -Japanese-Spanish -Chinese -Korean devices in here.
4.Micro SD card slot 12.Status light All records under [Category] will be deleted. Audio files will
5.Strap mount 13.Earphone port not be affected. Play mode: Album cover: Theme Press Play/Pause to turn on the Bluetooth. The H2 will now
6.LCD monitor 14.Menu button Press Play/Pause to select your favorite play mode: Press Play/Pause to turn on the album cover Enter to select Theme A, B or C. scan for Bluetooth devices. It is normal to take few seconds
7.Previous/Rewind 15.Play/Pause 2. Explorer -Play in order: Play the entire music library once. before successfully connected to your devices. When
8.Next/Fast-forward 16.Scroll wheel Press Play/Pause to enter the Explorer. -Single Repeat: Looping the single song. Gapless: Display scanning, your other Bluetooth devices (e.g., Bluetooth
You will see: -Random: Randomly play a song from your entire library Press Play/Pause to turn on the gapless play. - Backlight time: headphones or speakers) should also be in scanning/pairing
-Repeat all:Looping the entire music library repeatedly The default setting is Off. mode.