Documente Academic
Documente Profesional
Documente Cultură
FENILKUMAR M SHINGALA
patelfenil63@gmail.com,fms.shingala@gmail.com
India: Mob. No. +91-7016113901,+91-9426618074
Present Location: GUJARAT,INDIA
Objective
Over 7 years of total experience in Oil & Gas EPC Sector for Refinery, Petrochemical, Power Plant and
Pharmaceuticals for Instrumentation System Design & Detail Engineering and Execution work. To work
in a challenging environment of a firm where I could prove myself and persistently contribute to the
growth of the organization.
3 month overseas experience in TATA PROJECTS LTD, ABU DHABI, U.A.E, deputed through
ANI Instruments Pvt. Ltd in 01/01/2017 to 14/04/2017.
Educational Qualification
4 Years Full time Graduate Degree B.E., Instrumentation and control Engineering from
GUJARAT TECHNOLOGICAL UNIVERSITY ,securing First Class with score 66.00%,India in
2013.
Higher Secondary Level – HSC with First Class completed in 2009.
Area of Interest
Designing Instrumentation Automation & Process Automation & Control System through DCS.
Selection of Instruments, sizing calculations & protection co-ordination.
Hazardous Area Classification & Selection of all Instruments in Classified areas.
Skill Profile
Engineering Skills :
Automation System Studies: International standard,Saudi Aramco Engineering standard (SAES)
and procedure for preparation of new drawings, P & ID review, Scope of work, ESD System
studies.
Selection & Sizing of various Instruments: Including control valve, orifice plate and pressure relief
valve using SMART PLANT INSTRUMENTATION (INTOOL)
Engineering Documents : Design Basis & Philosophy, Instrument I/O List, Instrument specification
sheet (ISS),Instrument installation Schedule (IIS), Instrument mounting and piping details,
Instruments points and line diagram, ILD, Terminals Block diagrams & Interconnection
diagrams,
Block diagrams, Cable Schedule, Study & Reports, Project Specification, Datasheets
& MTO for all Instrumentation equipment’s.
Other Technical Skills : Vendor Drawing Review, Technical Liaison with Vendors, Interaction with
Clients & Contractors, Coordination with other disciplines, Interdisciplinary review, Support to
Procurement team/Technical Bid Evaluation (TBE), floating of inquiries, Support to Construction
team & attending Site Engineering Request (SER) & Revising Engineering deliverables in accordance
with SER.
Software Skills :
Experience on Instrumentation Design Tool’s (INTOOL’s) Intergraph’s Smart Plant
Instrumentation (Version SPI - 2013)
Spread Sheet/Office Packages MS-Office 2003, 2007,2010
Equipment Sizing and Calculation tool Instrucalc.
Scope of Work - INtools Software
Responsibilities:
Professional Experience
Present Experience
Organization: RELIANCE INDUSTRIES LTD.(DEPUTATION)
Duration : AUG,2018 – Till Date
Position : Instrumentation Design Engineer
Responsibilities:
Prepare / Review of Instrument index according to Vendor P&ID and Feed P&ID.
Prepare / Review of Vendor Instrument I/O List according to Vendor P&ID and Feed P&ID.
Prepare / Review of Vendor Instrument Logic Diagram according to Vendor P&ID and Feed
P&ID.
Prepare / Review of Vendor Instrument Junction Box Wiring Diagram according to Vendor P&ID and
Feed P&ID.
Prepare / Review of Vendor Instrument Cable Data sheet / Junction Box according to Vendor
P&ID and Feed P&ID.
Review of Vendor Cause & Effect Chart according to Vendor P&ID, Feed P&ID and Process P&ID.
Prepare / Review of Vendor Unit Control Panel Layout and Wiring Diagram according to Vendor
P&ID and Feed P&ID.
Prepare / Review of Vendor Local Control Panel Layout and Wiring Diagram according to Vendor
P&ID and Feed P&ID.
Prepare / Review of Vendor PLC Specification and Serial I/O Link Mapping details according to
Vendor P&ID and Feed P&ID.
Review of Vendor Bently Nevada Panel Drawing for Vibration and Temperature Monitoring System
details according to Vendor P&ID and Feed P&ID.
Prepare / Review of Vendor Architecture Diagram according to Vendor P&ID and Feed P&ID.
Co-ordination between Mechanical Package, Electrical, Process, Procurement Department.
Prepare Technical Bid Evaluation (TBE) and Technical Query with Concession Request to Company
Prepare / Review Fire & Gas Instrument Index and I/O List with respect to P&ID’s.
Prepare / Review Cable Calculation for Fire & Gas Instrument with respect to Vendor Offers.
Experience on Vendor Package HAZOP Study and Safety Integrity Level (SIL).
Previous Experience
Organization: SAIPEM SAUDI ARABIA, SAUDI ARABIA.
Duration : OCT ,2017 – JULY,2018
Position : Instrumentation Design Engineer
Previous Experience
Organization: ANI INSTRUMENTS PVT LTD,INDIA.
Duration : JAN 2017 – OCT 2018
Position : Instrumentation Design Engineer
Project : J3-DTA-HPIB.
Client : Reliance industries ltd Jamnagar,India
Previous Experience
Organization: VEDANT CHLORO CHEM,INDIA.
Duration : MAY 2015 – JAN 2017
Position : Instrumentation Engineer
Project : J3-DTA-HPIB.
Client : Reliance industries ltd Jamnagar,India
Engages in Plant Erection, Maintenance Work, Calibration, Loop Checking, Functional test,
Trouble shooting, Commissioning and Start up activates in Utilities and Process areas
Instruments also Fire and Gas MARK VI and Yokogawa DCS Systems
Involved in Calibration of all kind of field Instrument such as Rosemount, Foxboro, Yokogawa
Transmitter by Using HART-275,375 Communicator, Fisher and Masoneilan Control Valves
with Electro Pneumatic Positioner also Neles, BIFFIS on-off Valves, Indicators,
Thermocouples, RTD, and Skin Thermocouples
Assist Vendor for Pre Commissioning and Commissioning on Gas and Steam Turbines.
Witnessed The Final Loop Checking and Parepration Of Logic Folder During Loop Checking
Previous Experience
Organization: SINCLUS ENGG. AND CONS. PVT LTD.
Duration : DEC 2014 – APR 2015
Position : Instrumentation Engineer
Project : QAFCO-3 & QP,KNPC-MAA REFINERY,SHUT DOWN
Client : DOPET & KCCEC
Previous Experience
Organization: TAPI PIGMENTS.
Duration : MAY 2013 – NOV 2014
Position : Instrumentation Engineer
Installation, Calibration and Commissioning of Field Instruments Scanners, Level transmitter, Flow
transmitter, Pressure transmitter, Control Valves, I/P Converters, Pressure Switches, Draft
Indicators, Level Indicators, RTD, Pressure Gauges, Temperature Gauges etc.
Loop Checking and trouble shooting of PLC Control Panels, DCS etc
Techno-commercial evaluation of quotation of various items which are required for project.
Reviewing various vendor drawings like GA, ILD, Layout plan, Logic diagrams, Schematic diagrams,
Wiring Diagrams, Terminal block diagrams & BOM.
Personal Details:
DECLARATION:
I hereby declare that the informations furnished above are true to the best of my
knowledge and belief.