Documente Academic
Documente Profesional
Documente Cultură
Management System
Manage your critical processes
better, increase your productivity
and save energy
schneider-electric.us/tesyst
schneider-electric.us/tesyst TeSys T Motor Management System | 2
®
High performance
Advanced motor TeSys™ T covers all load monitoring and protection needs, from feeders to
management and critical process automation. Your equipment is protected, while advanced
diagnostics, statistics, and alarms help you anticipate unexpected production
halts and minimize downtime. TeSys T is compact and a natural fit for control
protection for your panels with IEC or NEMA standards. In addition, the system’s connectivity
and access to real-time data provide key information so you can enhance the
----------------
----------------
----------------
----------------
----------------
----------------
----------------
----------------
STOP ----------------
----------------
----------------
----------------
START RESET ----------------
----------------
----------------
----------------
----------------
----------------
----------------
----------------
----------------
----------------
----------------
----------------
--------------
possible configuration
LTMCU
Network or bus
LTME + LTMR
Protection Functions
• Thermal overload SoMOVE
• Phase imbalance and phase overloads
• Thermal motor protection via temperature probes
• Phase reversal
• Ground fault detection
• Long start and Jam protection SCADA
HMI
• Load shedding LTMR
• Load fluctuations (current, voltage, power)
• Variations of Cos (power factor)
Statistical and Diagnostic Functions • Independent mode: Starting of full voltage non-reversing motors
• Reverser mode: Starting of full voltage reversing motors
• History of the last five detected faults
• Two-step mode: Two-step starting of motors (star-delta by auto transformer
• Motor statistics and by resistor)
• Controller operations • Two-speed mode: Two-speed starting of motors (Dahlander, pole changer)
• Warning of potential faults A Custom logic mode is available allowing for user created specific control
schemes.
Communication
Custom Logic has the basic functions of a small programmable logic
TeSys T is a flexible motor management controller (PLC). Programming can be done in structured text mode or in
system that supports five major communication function block diagrams through SoMove. To ensure consistency, the same
protocols Modbus serial, Profibus®, CANopen®, software used to commission TeSys T controller, is used for custom logic
DeviceNet™, Modbus TCP/IP, EtherNet/IP. programming.
These communication protocols allow the TeSys
T controller to integrate seamlessly into your
automation system.
Introducing Modbus
TCP and EtherNet/IP
for reliable control
TeSys T now combines industry-
standard Modbus TCP and EtherNet/IP
protocols into one package.
New connectivity options bring new advantages TeSys T with Modbus TCP and EtherNet/IP
gives you:
Ethernet is the perfect choice for fast and failure-resistant connectivity in
industrial control networks. EtherNet/IP enables easier integration of the • Fast integration: Significantly reduced
TeSys T Motor Management System with any PLC, SCADA, or DCS controller configuration and testing time due to standard
package, while providing maximum speed, performance, and reliability during device profiles, preconfigured connections, and
both startup and operation. integration with both Schneider Electric and
third-party PLC, SCADA, and DCS systems
• Real-time exchange: Enhanced bandwidth,
Quality-of-Service message priority, and built-
in java-free web pages support data access,
Overall industrial automation architecture control, and other functions
• Superior reliability: Rapid Spanning Tree Protocol
MES ERP (RSTP) for fast failure recovery, broadcast storm
protection to prevent oversaturation of available
INTERNET TCP/IP
network bandwidth
MAINTENANCE
REMOTE STATION
• Dual Ethernet ports: Fast 100 Mbps peer-
to-peer communication, simple daisy-chain
connections, and support for redundant
SCADA REDUNDANT SERVERS architectures
• Fast device replacement (FDR) allows to replace
the device quickly with automatic download of
MAINTENANCE
configuration
STATION
1
Required for Voltage and Power measurement
Current Range
2
4 digital inputs
0.4 - 8 A 08
0.3 LTM9CEXP03
3
Sold in lots of 6
Network Protocol
CAN Open C
24 V DC BD
Length (m) Reference
100 . . .240V AC FM 1.0 LTM9CU10
3.0 LTM9CU30
6 digital inputs/4 relays output
1 input for external ground current sensor
1 input for motor temperature sensor
Current Transformers 4
TeSys T 4
To be used with controller LTM 8 •••
85 50 50438
d 160 80 50439
schneider-electric.us
1, August, 2016
Document Number 8502BR1602
©2015 Schneider Electric. All Rights Reserved. This document has been
All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies. printed on recycled paper