Documente Academic
Documente Profesional
Documente Cultură
3
AX
AY
Marking scheme
Q.3 AX & AY
Note:
1. Wrong quadrant (not third quadrant)- 50% deduction (marking will start from 15 not 30)
2. Wrong orientation of the solids - 50% deduction (marking will start from 15 not 30)
3. No marks for drawing the solids separately (Square prism not at the exact position)
4. Incomplete labelling is considered as no-labelling
5. If the hidden lines are of linetype- continuous, 1 mark has been deducted.
6. No marks have been deducted for change in scale of the drawing. But if the dimensions
are wrong, then as mentioned in point (2), 25% deduction is considered.
7. Drawing only the solids at correct position, without points transfer, drawing hidden lines,
trimming lines, drawing the profile, (1) marks have been awarded.
BX
BY
Marking Scheme
Q.3 BX & BY
Note:
8. Wrong quadrant (not third quadrant)- 50% deduction (marking will start from 15 not 30)
9. Wrong orientation of the solids - 50% deduction (marking will start from 15 not 30)
o Hexagonal pyramid not 75mm away from VP (seen in TV)
o Square prism not oriented properly (CW/CCW, 150mm away from ground,
150mm to the right/left of pyramid axis)
10. No marks for drawing the solids separately (Square prism not at the exact position)
11. Incomplete labelling is considered as no-labelling
12. If the hidden lines are of linetype- continuous, 1mark has been deducted.
13. No marks have been deducted for change in scale of the drawing. But if the dimensions
are wrong, then as mentioned in point (2), 50% deduction is considered.
14. Drawing only the solids at correct position, without points transfer, drawing hidden lines,
trimming lines, drawing the profile, (2) marks have been awarded.