Documente Academic
Documente Profesional
Documente Cultură
Name of work : Providing Additiional Bath rooms and toilets to Govt., SW BH No. 2 at Rajampeta
RATES AS PER COMMON SSR OF 2018-2019 with cement and steel rates of June 2018
Lead in KM
unloading charges
Area
Loading charges
Convence
Avg. Initial Cost allowence on
Charges
Sl. Thick including Seignio- 1% towards loading &
Description SSR Sl.No. Source of Material including Total
No. ness in Stacking rage Charges storage unloading
MR CT Total Stacking
mm Charges charges @
Charges
20 %
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14) (15) (16)
1 Sand for Concrete M-005 Cheruvu 11.00 0.00 11.00 116.18 100.00 0.00 0.00 0.00 0.00 0.00 216.18
2 Sand for Mortar & Plastering M-006 -Do- 11.00 0.00 11.00 116.18 182.00 0.00 0.00 0.00 0.00 0.00 298.18
3 Sand for filling & blindage M-004 -Do- 11.00 0.00 11.00 116.18 100.00 0.00 0.00 0.00 0.00 0.00 216.18
4 Gravel M-008 Local 5.00 0.00 5.00 47.53 110.00 0.00 0.00 18.84 9.42 1.88 187.67
R.R. Stone(Granite, Dolamite M-148
5 Porigutta 5.00 0.00 5.00 48.32 240.00 0.00 0.00 37.94 18.97 3.79 349.02
&Trap variety)
C.R. Stone(Granite, Dolamite
6 CSSR-A.14 -Do- 5.00 0.00 5.00 48.32 481.48 0.00 0.00 37.94 18.97 3.79 590.51
&Trap variety)
trough stones25 x25x45 to 60
7 CSSR-A.76 -Do- 5.00 0.00 5.00 48.32 986.67 0.00 0.00 37.94 18.97 3.79 1095.69
cms
40mm HBG Metal M-055
8 -Do- 5.00 0.00 5.00 48.32 808.00 0.00 856.32
(IS383-1970)
20mm M/c chips M-053
9 Mangampeta 30.00 0.00 30.00 334.37 1303.00 0.00 1637.37
(IS383-1970)
13.2/12.5 mm M/c chips M-052
10 -Do- 30.00 0.00 30.00 334.37 1048.00 0.00 1382.37
(IS383-1970)
10mm M/c chips M-051
11 -Do- 30.00 0.00 30.00 334.37 894.00 0.00 1228.37
(IS383-1970)
6mm M/c chips M-050
12 -Do- 30.00 0.00 30.00 334.37 703.00 0.00 1037.37
(IS383-1970)
M-021
Stone crusher dust finer than
13 3mm with not more than -Do- 30.00 0.00 30.00 334.37 343.00 0.00 677.37
10% passing 0.075 sieve.
14 Quarry rubbish R&B 35 a -Do- 30.00 0.00 30.00 334.37 84.75 0.00 419.12
2nd Class Bricks of size BMT-A.01
15 Local 5.00 0.00 5.00 76.93 5607.00 0.00 0.00 52.19 52.19 10.44 5798.75
23x11x7cm
Fly ash cement/lime solid BMT-A.07
blocks with compressive
16 strength of 75 kg/sq.cm - Local 5.00 0.00 5.00 76.93 7000.00 0.00 0.00 52.19 52.19 10.44 7191.75
IS:12894-1990 - CLASS -
7.5 - 225 x 100 x 60 mm
Fly Ash Bricks of size 290 BMT-A.13 2.2925
x100 x140 mm with
17 compressive strength of 50 Local 5.00 0.00 5.00 176.36 10000.00 0.00 0.00 119.65 119.65 23.93 10439.58
Kg /sq.cm
Page 1 of 94
Lead in KM
unloading charges
Area
Loading charges
Convence
Avg. Initial Cost allowence on
Charges
Sl. Thick including Seignio- 1% towards loading &
Description SSR Sl.No. Source of Material including Total
No. ness in Stacking rage Charges storage unloading
MR CT Total Stacking
mm Charges charges @
Charges
20 %
Page 2 of 94
Lead in KM
unloading charges
Area
Loading charges
Convence
Avg. Initial Cost allowence on
Charges
Sl. Thick including Seignio- 1% towards loading &
Description SSR Sl.No. Source of Material including Total
No. ness in Stacking rage Charges storage unloading
MR CT Total Stacking
mm Charges charges @
Charges
20 %
CERTIFICATES:-
1 Certified that the above leads are true and correct to the best of my knowledge
Page 3 of 94
LEAD CHART
(17)
Cum.
Cum.
Cum.
Cum.
Cum.
Cum.
Cum.
Cum.
Cum.
Cum.
Cum.
Cum.
Cum.
Cum.
1000
Nos
1000
Nos
1000
Nos
Page 4 of 94
Unit
per
1000
Nos
1Sqm.
1Sqm.
1Sqm.
1Sqm.
1Sqm.
1Sqm.
KL
M.T
M.T
M.T
M.T
M.T
Page 5 of 94
Unit
per
Page 6 of 94
Name of work : Providing Additiional Bath rooms and toilets to Govt., SW BH No. 2 at Rajampeta
DATA
Overheads 13.615%
COMMON STANDARD SCHEDULE OF RATES FOR THE YEAR 2018-2019
20% AGENCY / MUNICIPAL / LALI
ALLOWANCE
LABOUR CHARGES
Sl.No Description SSR Initial Final Rate Unit
Sl.No. Rate
1 1st class mason I-11 490.00 588.00 per day
2 2nd class mason 43 440.00 528.00 per day
Mate 71 451.00 541.20 per day
3 1st class Brick Layer I-11 475.00 570.00 per day
4 2nd class Brick layer 44 440.00 528.00 per day
5 1st class Painter I-35 550.00 660.00 per day
6 2nd class Painter 46 440.00 528.00 per day
7 Head mazdoor (Skilled Mazdoor) II-10 440.00 528.00 per day
8 Man mazdoor (Unskilled mazdoor) III-3 400.00 480.00 per day
9 Woman mazdoor III-4 400.00 480.00 per day
10 Cost of binding wire CSSR- 53.00 53.00 per Kg
A.03
11 Labour charges for fixing flush door shutter BMM-V.23 383.00 459.60 per Sqmt.
of any thickness fixing the door shutter to
the frame and fixtures to the door shutter
SCAFFOLDING CHARGES
BRICK MASONRY rate per (0.23M 0.115 thick
sqm THICK)
a) For Superstructure in FF over the rate of P. No. 95 79.46 345.48 1 cu.m. 690.96
foundation and basement of Bldg.
SOR
b) For Superstructure in SF over the rate of FF 983 113.78 494.70 1 cu.m. 989.39
superstructure
c) For Superstructure in 3rd floor over the rate 984 148.09 643.87 1 cu.m. 1287.74
2nd floor superstructre
d) Add for every additional floor over 2nd floor 985 29.00 126.09 1 cu.m. 252.17
Scaffolding for Plastering of walls,ceiling or
painting of roof timber,or walls where height is
more than 3Mt.
1st and 2nd 986 44.00 10 Sqmt.
2nd and 3rd 987 88.00 10 Sqmt.
3rd and 4th 988 132.00 10 Sqmt.
Add for every additional floor over 4th floor 989 32.00 10 Sqmt.
CENTERING CHARGES (Providing Centring, shuttering and scaffolding with props and steel centering plates as per the
approved shuttering plan and other accessories as per the norms and stability calculations including cost and conveyance of all
accessories Using Cashewrina Ballies and Wooden runners & staging including all bracings, cross members etc complete for
finished item of work)
Sl NAME OF THE STRUCTURAL MEMBER Unit of Material Hire charges Labour charges Centring Charges for
Measurem 2013-14
ent
1 2 6 3 4 5
HIRE CHARGES FOR CENTERING & SCAFFOLDING -Unsupported Height upto 3.66 M Casurina Ballies, Bamboos, Wooden Reapers, Runners, Woo
Posts, Wall Plates etc
K WAFFLE - (GRID) SLABS (Rib Beams with Slabs) per 1 sqm Rs. 575.00 Rs. 607.00 Rs.
L PERGOLA SLABS (Only Rib Beams) per 1 sqm Rs. 403.00 Rs. 425.00 Rs.
M ARCH BEAMS - up to 1.5 M Span per 1 cum Rs. 1586.00 Rs. 1675.00 Rs.
N ARCH BEAMS - above 1.5 M Span per 1 cum Rs. 1609.00 Rs. 1698.00 Rs.
O DOME SLABS per 1 cum Rs. 2566.00 Rs. 2708.00 Rs.
P HELICAL STAIRCASES per 1 sqm Rs. 196.00 Rs. 207.00 Rs.
HIRE CHARGES FOR CENTERING & SCAFFOLDING - Unsupported Height upto 3.66 M Steel scaffolding pipes, jack Props, wallers, Foot plate
brackets, steel Centering Plates,etc.,
K WAFFLE - (GRID) SLABS (Rib Beams with Slabs) per 1 sqm Rs. 858.00 Rs. 783.00 Rs.
L PERGOLA SLABS (Only Rib Beams) per 1 sqm Rs. 602.00 Rs. 549.00 Rs.
M ARCH BEAMS - up to 1.5 M Span per 1 cum Rs. 2370.00 Rs. 2163.00 Rs.
N ARCH BEAMS - above 1.5 M Span per 1 cum Rs. 2404.00 Rs. 2193.00 Rs.
O DOME SLABS per 1 cum Rs. 3833.00 Rs. 3496.00 Rs.
P HELICAL STAIRCASES per 1 sqm Rs. 292.00 Rs. 267.00 Rs.
HIRE CHARGES FOR CENTERING & SCAFFOLDING - Unsupported Height up to 7.32 M - Steel scaffolding pipes, jack Props, wallers, Foot plates,
brackets, steel Centering Plates, etc.,
DOME SLABS
P HELICAL STAIRCASES per 1 sqm Rs. 505.00 Rs. 298.00 Rs.
Sl NAME OF THE STRUCTURAL MEMBER Unit of Material Hire charges Labour charges Centring Charges for
Measurem 2013-14
ent
CENTERING & SCAFFOLDING CHARGES- FLOOR WISE RATES for Steel scaffolding pipes, jack Props, Steel Cen
Unit per 1 cum per 1 sqm per 1 cum per 1 cum per 1 sqm
1st - Floor
Material Hire for any Floor H 1266.00 250.00 190.00 1916.00 215.00
Labour Charges for 1st Floor L 424.00 424.00 424.00 424.00 424.00
Total Hire Charges (H+L) T 1690.00 674.00 614.00 2340.00 639.00
LABOUR CHARGES for Further Floors
2nd - Floor L 466.00 466.00 466.00 466.00 466.00
3rd - Floor L 509.00 509.00 509.00 509.00 509.00
4th - Floor L 551.00 551.00 551.00 551.00 551.00
5th - Floor L 594.00 594.00 594.00 594.00 594.00
Unit per 1 cum per 1 sqm per 1 cum per 1 cum per 1 sqm
1st - Floor
Material Hire for any Floor H 279.00 55.00 42.00 422.00 47.00
Labour Charges for 1st Floor L 361.00 361.00 361.00 361.00 361.00
Total Hire Charges (H+L) T 640.00 416.00 403.00 783.00 408.00
LABOUR CHARGES for Further Floors
2nd - Floor L 397.00 397.00 397.00 397.00 397.00
3rd - Floor L 433.00 433.00 433.00 433.00 433.00
4th - Floor L 469.00 469.00 469.00 469.00 469.00
5th - Floor L 505.00 505.00 505.00 505.00 505.00
total
MATERIAL RATES OF MISCELLANEOUS BUILDING ITEMS
Sl. Description of Item SSR Sl. Unit Rate
No No
1 2 3 4 5
13 Synthetic enamel paint 1st quality (All Shades) BMT-J.30 Ltr 172.00
37 Nano polished /stain free soluble salt porcelain BMT-C.07 Sqmt. 443.00
vitrified tiles screen printed of size 600 x 600
mm and thickness between 8-10 mm 1st quality
material
Metal 40mm 0.9 cu.m. 856.32 1 cu.m. 770.69
Sand 0.45 cu.m. 216.18 1 cu.m. 97.28
Cement 129.6 Kgs. 3975.20 1000 Kgs. 515.19
Water 1.2 KL 132.49 1 KL 158.99
Machinery
concrete mixer300/200 (diesel) 1 Hour 389.50 1 Hour 389.50
LA oncrew charges 20% 241.80 1 48.36
material
Metal 40mm 0.9 cu.m. 856.32 1 cu.m. 770.69
Sand 0.45 cu.m. 216.18 1 cu.m. 97.28
Cement 162 Kgs. 3975.20 1000 Kgs. 643.98
Water 1.2 KL 132.49 1 KL 158.99
Machinery
concrete mixer300/200 (diesel) 1 Hour 389.50 1 Hour 389.50
LA oncrew charges 20% 241.80 1 48.36
Labour
1st class mason 0.1 cu.m. 588.00 1 cu.m. 58.80
Light Mazdoor 1.39 Nos. 480.00 1 Each 667.20
Add 13.615% over heads 2834.80 cu.m. 0.13615 1 cu.m. 385.96
Rate per Cu.m. Total 3220.80
8 Plain Cement Concrete corresponding to M5
grade as per IS 456 equivalent to (1:5:10)
proportion nominal mix (cement: fine
aggregate: Coarse aggregate) using 20mm size
Hard Blasted Granite (IS383, 1970) Machine
Crushed graded metal from approved quarry
including cost and conveyance of all materials
like cement, sand, coarse aggregate, water etc.
to site, including seigniorage charges, sales &
other taxes on all materials, all operational,
incidental, and labour charges such as mixing,
laying concrete, finishing top surface, curing
concrete, etc., complete for finished item of
work for Dummy Columns. (APSS No. 402)
materal
Graded Metal 20mm to 6mm 0.9 cu.m. 1477.77 1 cu.m. 1329.99
Sand 0.45 cu.m. 216.18 1 cu.m. 97.28
Cement 129.6 Kgs. 3975.20 1000 Kgs. 515.19
Water 1.2 KL 132.49 1 KL 158.99
Machinery
concrete mixer300/200 (diesel) 1 Hour 389.50 1 Hour 389.50
LA oncrew charges 20% 241.80 1 48.36
Labour
1st class mason 0.1 cu.m. 588.00 1 cu.m. 58.80
Light Mazdoor 1.39 Nos. 480.00 1 Each 667.20
Total 3265.31
Rate for other Floors GF FF SF TF
Basic Rate of P.C.C(1:5:10) per Cum. 3265.31 3265.31 3265.31 3265.31
Material
Material
Graded Metal 20mm to 6mm 0.9 cu.m. 1477.77 1 cu.m. 1329.99
Sand 0.45 cu.m. 216.18 1 cu.m. 97.28
Cement 331.2 Kgs. 3975.20 1000 Kgs. 1316.59
Water 1.2 KL 132.49 1 KL 158.99
Machinery
concrete mixer300/200 (diesel) 1 Hour 389.50 1 Hour 389.50
Material
Graded Metal 20mm to 6mm 0.8 cu.m. 1477.77 1 cu.m. 1182.22
Sand 0.4 cu.m. 216.18 1 cu.m. 86.47
Cement 350 kgs 3975.20 1000 kgs 1391.32
Water 1.2 KL 132.49 1 KL 158.99
Machinery
Batchingplant 0.5 cum 1.333 Hour 591.40 1 Hour 788.34
needle vibrator 40 mm (petrol) 1.333 Hour 203.50 1 Hour 271.27
LA on crew charges 20% 726.09 1 145.22
Labour
1st class Masons 0.1 Nos. 588.00 1 Each 58.80
Man and Mazdoor 1.39 Nos. 480.00 1 Each 667.20
Basic rate per Cum. 4749.82
Rate for other Floors GF FF SF TF
Basic Rate of P.C.C(1:1.5:3) per Cum. 4749.82 4749.82 4749.82 4749.82
Hire charges on centering material 288.00 288.00 288.00 288.00
Labour charges for centering 631.00 694.10 757.20 820.30
La on centering labour charges 20% 126.20 138.82 151.44 164.06
Lift Charges per Cum. 0.00 72.60 145.20 217.80
5795.02 5943.34 6091.66 6239.98
Add 13.615% over heads 0.13615 788.99 809.19 829.38 849.57
Rate per cu.m. Total 6584.05 6752.55 6921.05 7089.55
13 Coursed Rubble stone masonry 2nd sort, in CM (1:6) prop: (Cement: Sand) using hard blasted granite
stones from approved quarry including cost and conveyance of all materials like Granite stones,
cement, sand, water, etc., to site including seigniorage charges, sales & other taxes on all materials,
all operational, incidental, and labour charges such as cutting stones to required size and shape,
mixing of cement mortar, constructing masonry, curing etc., complete for finished item of work for
foundation and basement (APSS No. 601 & 612)
Material
Graded Metal 20mm to 6mm 0.9 cu.m. 1477.77 1 cu.m. 1329.99
Sand 0.45 cu.m. 216.18 1 cu.m. 97.28
Cement 400 kgs 3975.20 1000 kgs 1590.08
Water 1.2 KL 132.49 1 KL 158.99
Machinery
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) 1 Hour 389.50 1 Hour 389.50
capacity
Vibrator hire charges 1 Hour 203.50 1 Hour 203.50
LA on crew charges 20% 415.90 1 83.18
manpower
1st Class Mason 0.133 Nos. 588.00 1 Each 78.20
2nd Class Mason 0.267 Nos. 528.00 1 Each 140.98
Man Mazdoor 3.6 Nos. 480.00 1 Each 1728.00
Basic rate per Cum. Total 5799.70
a) For Foundationis
Rate as worked out above per Cum. 5799.70 5799.70 5799.70 5799.70
Hire charges on centering material 1390.00 1390.00 1390.00 1390.00
Labour charges for centering 1521.00 1673.10 1825.20 1977.30
La on centering labour charges 20% 304.20 334.62 365.04 395.46
Lift charges @ 10% extra on each floor 194.72 389.44 862.31
9014.90 9392.14 9769.38 10424.77
Material
Graded Metal 20mm to 6mm 0.9 cu.m. 1477.77 1 cu.m. 1329.99
Sand 0.45 cu.m. 216.18 1 cu.m. 97.28
Cement 400 kgs 3975.20 1000 kgs 1590.08
Water 1.2 KL 132.49 1 KL 158.99
Machinery
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) 1 Hour 389.50 1 Hour 389.50
capacity
Vibrator hire charges 1 Hour 203.50 1 Hour 203.50
LA on crew charges 20% 415.90 1 83.18
manpower
1st Class Mason 0.167 Nos. 588.00 1 Each 98.20
2nd Class Mason 0.167 Nos. 528.00 1 Each 88.18
Man Mazdoor 4.7 Nos. 480.00 1 Each 2256.00
Basic rate per Cum. Total 6294.90
a) For columns / RCC walls and Water tanks
Rate as worked out above per Cum. 6294.90 6294.90 6294.90 6294.90
Hire charges on centering material 790.00 790.00 790.00 790.00
Labour charges for centering 1251.00 1376.10 1501.20 1626.30
La on centering labour charges 20% 250.20 275.22 300.24 325.26
Lift charges @ 10% extra on each floor 244.24 488.47 732.71
8586.10 8980.46 9374.81 9769.17
Add 13.615% over heads 0.13615 1169.00 1222.69 1276.38 1330.07
Rate per cu.m. Total 9755.10 10203.15 10651.20 11099.25
Material
Graded Metal 20mm to 6mm 0.9 cu.m. 1477.77 1 cu.m. 1329.99
Sand 0.45 cu.m. 216.18 1 cu.m. 97.28
Cement 400 kgs 3975.20 1000 kgs 1590.08
Water 1.2 KL 132.49 1 KL 158.99
Machinery
Concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) 0.267 Hour 389.50 1 Hour 104.00
capacity
Vibrator hire charges 0.267 Hour 203.50 1 Hour 54.33
LA on crew charges 20% 111.05 1 22.21
manpower
1st Class Mason 0.067 Nos. 588.00 1 Each 39.40
2nd Class Mason 0.133 Nos. 528.00 1 Each 70.22
Man Mazdoor 2.5 Nos. 480.00 1 Each 1200.00
Basic rate per Cum. Total 4666.50
a) For roof beams
Rate for other Floors GF FF SF TF
Rate as worked out above per Cum. 4666.50 4666.50 4666.50 4666.50
Hire charges on centering material 1395.00 1395.00 1395.00 1395.00
Labour charges for centering 1473.00 1620.30 1767.60 1914.90
La on centering labour charges 20% 294.60 324.06 353.52 382.98
Lift charges @ 10% extra on each floor 14.90 261.92 392.89
7829.10 8020.76 8444.54 8752.27
Add 13.615% over heads 0.13615 1065.93 1092.03 1149.72 1191.62
Rate per cu.m. Total 8895.05 9112.80 9594.30 9943.90
Cost of RCC for 75 mm thick slab 0.075 cu.m. 4666.50 1 cu.m. 349.99
Cost of RCC for 100 mm thick slab 0.1 cu.m. 4666.50 1 cu.m. 466.65
Cost of RCC for 115 mm thick slab 0.115 cu.m. 4666.50 1 cu.m. 536.65
Cost of RCC for 125 mm thick slab 0.125 cu.m. 4666.50 1 cu.m. 583.31
Material
manpower
Material
Graded Metal 20mm to 6mm 0.8 cu.m. 1477.77 1 cu.m. 1182.22
Sand 0.4 cu.m. 216.18 1 cu.m. 86.47
Cement 350 kgs 3975.20 1000 kgs 1391.32
Water 1.2 KL 132.49 1 KL 158.99
Machinery
Batchingplant 0.5 cum 1.333 Hour 591.40 1 Hour 788.34
needle vibrator 40 mm (petrol) 1.333 Hour 203.50 1 Hour 271.27
LA on crew charges 20% 726.09 1 145.22
manpower
1st Class Mason 0.167 Nos. 588.00 1 Each 98.20
2nd Class Mason 0.167 Nos. 528.00 1 Each 88.18
Man Mazdoor 5.6 Nos. 480.00 1 Each 2688.00
Basic rate per Cum. Total 6898.19
a) For columns / RCC walls and Water tanks
Rate as worked out above per Cum. 6898.19 6898.19 6898.19 6898.19
Hire charges on centering material 790.00 790.00 790.00 790.00
Labour charges for centering 1251.00 1376.10 1501.20 1626.30
La on centering labour charges 20% 250.20 275.22 300.24 325.26
Lift charges @ 10% extra on each floor 287.44 574.87 862.31
9189.39 9626.95 10064.50 10502.06
Add 13.615% over heads 0.13615 1251.14 1310.71 1370.28 1429.86
Rate per cu.m. Total 10440.55 10937.70 11434.80 11931.95
Material
Graded Metal 20mm to 6mm 0.8 cu.m. 1477.77 1 cu.m. 1182.22
Sand 0.4 cu.m. 216.18 1 cu.m. 86.47
Cement 350 kgs 3975.20 1000 kgs 1391.32
Water 1.2 KL 132.49 1 KL 158.99
Machinery
Batchingplant 0.5 cum 0.308 Hour 591.40 1 Hour 182.15
needle vibrator 40 mm (petrol) 0.308 Hour 203.50 1 Hour 62.68
LA on crew charges 20% 167.77 1 33.55
manpower
1st Class Mason 0.067 Nos. 588.00 1 Each 39.40
2nd Class Mason 0.133 Nos. 528.00 1 Each 70.22
Man Mazdoor 3.077 Nos. 480.00 1 Each 1476.96
Basic rate per Cum. Total 4683.96
a) For roof beams
Rate for other Floors GF FF SF TF
Rate as worked out above per Cum. 4683.96 4683.96 4683.96 4683.96
Hire charges on centering material 1395.00 1395.00 1395.00 1395.00
Labour charges for centering 1473.00 1620.30 1767.60 1914.90
La on centering labour charges 20% 294.60 324.06 353.52 382.98
Lift charges @ 10% extra on each floor 158.66 317.32 475.97
Cost of VRCC for 75 mm thick slab 0.075 cu.m. 4683.96 1 cu.m. 351.30
Cost of VRCC for 115 mm thick slab 0.115 cu.m. 4683.96 1 cu.m. 538.66
Cost of VRCC for 125 mm thick slab 0.125 cu.m. 4683.96 1 cu.m. 585.50
Material
cost of cement for Cement Mortar (1:3) 0.96 Kgs 3.98 1 Kgs 3.82
cost of sand for Cement Mortar (1:3) 0.002 cu.m. 216.18 1 cu.m.
1st Class Mason 0.048 Nos. 588.00 1 Each 28.22
2nd Class Mason 0.112 Nos. 528.00 1 Each 59.14
Man mazdoor 0.05 Nos. 480.00 1 Each 24.00
Woman mazdoor 0.11 Nos. 480.00 1 Each 52.80
Material
Fly Ash Bricks 290x100x140mm 24 Nos 10439.58 1000 Nos 250.55
Cement for Cement Mortar (1:4) 7.2 Kgs 3.98 Kgs 28.66
Sand for Cement Mortar (1:4) 0.02 cu.m. 216.18 1 cu.m. 4.32
Labour
1st class mason 0.06 cu.m. 588.00 1 cu.m. 35.28
2nd class mason 0.06 Nos. 528.00 1 Each 31.68
Man Mazdoor 0.275 Nos. 480.00 1 Each 132.00
Add water charges 1.0% 482.49 1 4.82
Basic Rate per One Sqmt. 487.31
Rate for other Floors GF FF SF TF
Basic rate per sqm 487.31 487.31 487.31 487.31
Hire charges of stage scafflding per cum 10.32 10.32 10.32 10.32
Labour charges for stage scaffolding per cum 79.46 113.78 148.09 182.41
Add LA on Labour for scaffolding 20% 15.89 22.76 29.62 36.48
Lift charges @ 10% extra on each floor 19.90 39.79 59.69
592.98 654.07 715.13 776.21
Add 13.615% over heads 0.13615 80.73 89.05 97.37 105.68
Rate per One Sqmt. Total 673.75 743.15 812.55 881.90
29 Providing High Yield Strength Deformed
(HYSD) steel bars (Fe 415 grade as per IS
1786-1985) of 8mm to 40mm diameters,
cutting, bending, to required sizes and shapes
placing in position with cover blocks of
approved size and binding wire of 20SWG,
forming grills for reinforcement work as per
approved designs and drawings including cost
and conveyance of bars from approved sources
to site of work, including cost and conveyance
of binding wire, cover blocks, chairs, overlaps,
spacers, dowels, wastage etc., and all
operational, incidental, and labour charges such
as cutting, bending, placing in position, tying
etc., and sales & other taxes,on cost of all
materials complete for finished item of work
(APSS No.126) in all floors.
Material
Material
Cost of Mild steel 1.05 MT 39746.24 1 MT 41733.55
cost of binding wire 6 Kg 53.00 1 Kg 318.00
Labour
Blacksmith/Tin Smith/Rivetor 10 Nos 588.00 1 Nos 5880.00
Light mazdoor 10 Nos 480.00 1 Nos 4800.00
Rate per MT Total 52731.55
Rate for other Floors GF FF SF TF
Basic rate per MT 52731.55 52731.55 52731.55 52731.55
Lift Charges per MT @10% extra on labour per 1068.00 2136.00 3204.00
floor 52731.55 54279.55 54868.55 55935.55
Add 13.615% over heads 0.13615 7179.40 7390.16 7470.35 7615.63
Rate per One MT Total 59911.00 61669.75 62338.95 63551.20
31 Ornamental Plastering 12mm thick in two
coats with base coat of 8mm thick in CM
(1:5) and top coat of 4mm thick in CM (1:3)
dubara sponge finish including cost and
conveyance of all materials like cement, sand,
water etc., to site, seigniorage charges, sales &
other taxes on all materials,all operational,
incidental and labour charges such as mixing
mortar, scaffolding charges, lift charges,
including cutting of Grooves wherever
necessary as directed by Engineer - in - charge,
finishing, curing, etc., complete for Even
Surfaces of Wall for finished item of work.
(APSS 901,903 & 904)
Material
Base coat 8mm thick in C.M. (1:5)
Cement 3.17 kgs 3975.20 1000 kgs 12.60
cost of sand for Plastering 0.011 cu.m. 298.18 1 cu.m. 3.28
Top Coat 4mm thick in C.M. (1:3)
Material
Base coat 8mm thick in C.M. (1:6)
Cement 2.64 kgs 3975.20 1000 kgs 10.49
cost of sand for Plastering 0.011 cu.m. 298.18 1 cu.m. 3.28
Top Coat 4mm thick in C.M. (1:4)
Cement 1.44 kgs 3975.20 1000 kgs 5.72
cost of sand for Plastering 0.004 cu.m. 298.18 1 cu.m. 1.19
Labour
1st Class Mason 0.063 Nos. 588.00 1 Each 37.04
2nd Class Mason 0.147 Nos. 528.00 1 Each 77.62
Light mazdoor 0.39 Nos. 480.00 1 Each 187.20
Add water charges 1.0% 322.55 1 3.23
Basic rate per 1 Sqmt. 325.78
Rate for other Floors GF FF SF TF
Basic rate per 1 Sqmt. 325.78 325.78 325.78 325.78
Hire charges of access scafflding pers qm 1.03 1.03 1.03 1.03
Labour charges for access scaffolding per sqm 7.95 11.38 14.81 18.24
Material
Cost of Polished black Kadapa slabs minimum 1.1 Sqmt. 1365.96 1 Sqmt. 1502.56
of 15 mm thick (0.457x0.457M)
Cement for Morter and slurry 5.46 Kgs 3975.20 1000 Kgs 21.70
Coarse sand for mortor(C.M. 1:8) 0.012 cum 216.18 1 cum 2.59
Machinery
Machine charges for rubbuing/polishing floor 0.1 day 0.00 1 day 0.00
LA charges on crew charges 20% 0.00
Labour
1st Class Mason 0.31 Nos. 588.00 1 Each 182.28
Material
soluble salt porcelain vitrified tiles screen 1.1 Sqmt. 418.00 1 Sqmt. 459.80
printed and polished of size 600 x 600 mm and
thickness betweenMortar
sand for Cement 8-10 mm
(1:3)1st quality 0.012 cu.m. 216.18 1 cu.m. 2.59
cement for Cement Mortar (1:3) base coat 5.76 Kgs 3975.20 1000 Kgs 22.90
Cement for slurry 3.3 Kgs 3975.20 1000 Kgs 13.12
Labour
1st Class Mason 0.096 Nos. 588.00 1 Each 56.45
2nd Class Mason 0.224 Nos. 528.00 1 Each 118.27
Man Mazdoor 0.31 Nos. 480.00 1 Each 148.80
Add water charges @1% on labour 1% 821.93 8.22
Basic rate per 1 Sqmt. 830.15
Rate for other Floors GF FF SF TF
Basic rate per 1 Sqmt. 830.15 830.15 830.15 830.15
Lift charges @ 10% extra on each floor 33.17 66.35 99.52
830.15 863.32 896.50 929.67
Add 13.615% over heads 0.13615 113.02 117.54 122.06 126.57
Rate per 1 Sqmt. Total 943.20 980.90 1018.60 1056.25
in Single piece with the edges flat nosed and fixing of
set over a base coat of CM (1:3), 12mm thick,
and fixing in position with neat cement paste
including cost and conveyance of all materials
like cement, sand, water, stones etc. to site,
seigniorage charges, sales and other taxes on all
materials, all operational, incidental and labour
charges such as dressing of stones to the
required sizes, mixing of cement mortar, fixing
in position, curing, lift charges etc., complete
for finished item of work For raisers (APSS
No.701 & 707)
Material
soluble salt porcelain vitrified tiles screen 1.05 Sqmt. 418.00 1 Sqmt. 438.90
printed and polished of size 600 x 600 mm and
thickness between 8-10 mm 1st quality
Sand 0.012 cum 216.18 1 cum 2.59
Cement 2.16 Kgs 3975.20 1000 Kgs 8.59
Material
Non-skid red or white full body Ceramic floor 1.05 Sqmt. 411.00 1 Sqmt. 431.55
tiles of size 300 x 300 mm and thickness
between 7-8 mm
Sand 0.012 cum 216.18 1 cum 2.59
Cement 2.16 Kgs 3975.20 1000 Kgs 8.59
Grey Cement for slurry 3.3 Kgs 3975.20 1000 Kgs 13.12
White Cement for pointing 0.2 Kgs 27.00 1 Kgs 5.40
Labour
1st Class Mason 0.096 Nos. 588.00 1 Each 56.45
2nd Class Mason 0.224 Nos. 528.00 1 Each 118.27
Man Mazdoor 0.33 Nos. 480.00 1 Each 158.40
Add water charges @1% on labour 1% 794.37 7.94
Basic rate per 1 Sqmt. 802.31
Rate for other Floors GF FF SF TF
Basic rate per 1 Sqmt. 802.31 802.31 802.31 802.31
Lift charges @ 10% extra on each floor 34.11 68.21 102.32
802.31 836.42 870.52 904.63
Add 13.615% over heads 0.13615 109.23 113.88 118.52 123.17
Rate per Sqmt. 911.55 950.35 989.05 1027.85
Material
Polished shahbad / Thandur stone slab of 15 to 1.1 Sqmt. 1635.01 1 Sqmt. 1798.51
18 mm thick (0.457 x 0.304 m) or any other size
as specified
sand for Cement Mortar (1:3) 0.012 cu.m. 216.18 1 cu.m. 2.59
cement for Cement Mortar (1:3) base coat 5.76 Kgs 3975.20 1000 Kgs 22.90
Cement for slurry 3.3 Kgs 3975.20 1000 Kgs 13.12
Labour
1st Class Mason 0.096 Nos. 588.00 1 Each 56.45
2nd Class Mason 0.224 Nos. 528.00 1 Each 118.27
Man Mazdoor 0.31 Nos. 480.00 1 Each 148.80
Add water charges @1% on labour 1% 2160.64 21.61
Basic rate per 1 Sqmt. 2182.24
Rate for other Floors GF FF SF TF
Basic rate per 1 Sqmt. 2182.24 2182.24 2182.24 2182.24
Lift charges @ 10% extra on each floor 34.51 69.03 103.54
2182.24 2216.75 2251.27 2285.78
Add 13.615% over heads 0.13615 297.11 301.81 306.51 311.21
Rate per 1 Sqmt. Total 2479.40 2518.60 2557.80 2597.00
47 Polished Marble Slabs of any variety 16 to 20
mm thick (size 0.457 x 0.457 M / 0.6 x 0.6 M)
set over a base coat of CM (1:8), 12mm thick
(joints of stone must be flushed) over C.C. bed
already laid or R.C.C. roof slab only after it is
properly cured, cleaned, moistered and where
necessary treated with neat grey cement slurry
of honey like consistency spred at3.3 kgs of
cement for 1 sqm. and jointed with neat cement
paste to full depth, including cost and
conveyance of all materials like cement, sand,
water, flooring stones etc. to site, seigniorage
charges, sales and other taxes on all materials,
all operational, incidental and labour charges
such as dressing of flooring stones to the
required sizes, mixing of cement mortar, laying,
jointing, curing, lift charges etc., complete for
finished item of work.(APSS No.703 & 701)
Material
Polished Marble Slabs of any variety 16 to 20 1.1 Sqmt. 648.00 1 Sqmt. 712.80
mm thick (size 0.457 x 0.457 M / 0.6 x 0.6 M)
Cement for Morter and slurry 5.46 Kgs 3975.20 1000 Kgs 21.70
Coarse sand for mortor(C.M. 1:8) 0.012 cum 216.18 1 cum 2.59
Material
Polished shahbad / Thandur stone slab of 15 to 1.1 Sqmt. 1610.00 1 Sqmt. 1771.00
18 mm thick (0.457 x 0.304 m) or any other size
as specified
sand for Cement Mortar (1:3) 0.012 cu.m. 216.18 1 cu.m. 2.59
cement for Cement Mortar (1:3) base coat 5.76 Kgs 3975.20 1000 Kgs 22.90
Cement for slurry 3.3 Kgs 3975.20 1000 Kgs 13.12
Labour
1st Class Mason 0.096 Nos. 588.00 1 Each 56.45
2nd Class Mason 0.224 Nos. 528.00 1 Each 118.27
Man Mazdoor 0.31 Nos. 480.00 1 Each 148.80
Add water charges @1% on labour 1% 2133.13 21.33
Basic rate per 1 Sqmt. 2154.46
Rate for other Floors GF FF SF TF
Basic rate per 1 Sqmt. 2154.46 2154.46 2154.46 2154.46
Lift charges @ 10% extra on each floor 34.49 68.97 103.46
2154.46 2188.95 2223.43 2257.92
Add 13.615% over heads 0.13615 293.33 298.03 302.72 307.42
Rate per 1 Sqmt. Total 2447.80 2487.00 2526.20 2565.35
Glazed full body porcelain wall tiles of size 300 1.05 Sqmt 554.00 1 Sqmt 581.70
x 600 mm with any type of design texture
Grey cement 0.33 Kgs 3975.20 1000 Kgs 1.31
White cement 0.6 Kgs 27.00 1 Kgs 16.20
Cement for Cement Mortar CM (1:5) 3.45 Kgs 3.98 1 Kgs 13.73
Sand Mortar CM (1:5) 0.012 Cum 216.18 1 Cum 2.59
Labour
1st Class Mason 0.077 Nos. 588.00 1 Each 45.28
Man Mazdoor 0.08 Nos. 480.00 1 Each 38.40
Add water charges @1% on labour 1% 699.21 6.99
Basic rate per 1 Sqmt. 706.21
Rate for other Floors GF FF SF TF
Basic rate per 1 Sqmt. 706.21 706.21 706.21 706.21
Lift charges @ 10% extra on each floor 8.37 16.74 25.10
706.21 714.58 722.95 731.31
Add 13.615% over heads 0.13615 96.15 97.29 98.43 99.57
Rate per Sqmt. 802.40 811.90 821.40 830.90
50 Flooring with precast terrazzo chequered
tiles conforming to IS: 13801 using marble
aggregates of size 10 mm of any shade as
approved by Engineer - in - charge set over a
base coat of CM (1:8), 12mm thick laid over
flooring bed / V.R.C.C. slab, with neat cement
slurry of honey like consistency spread at the
rate of 3.3 Kgs of cement per Sq.m and jointed
with neat white cement paste to full depth
mixed with pigment of matching shade
including cost and conveyance of all materials
like cement, sand, water, ceramic tiles etc. to
site, seigniorage charges, sales and other taxes
on all materials, all operational, incidental and
labour charges such as mixing of cement mortar,
laying, curing, lift charges etc., complete for
finished item of work.(APSS No.701 & 707) in
All Floors
Material
Supplying precast terrazzo chequered tiles 1.05 Sqmt. 266.00 1 Sqmt. 279.30
conforming to IS: 13801 using marble
aggregates of size 10 mm
Sand 0.012 cum 216.18 1 cum 2.59
Cement 2.16 Kgs 3975.20 1000 Kgs 8.59
Grey Cement for slurry 3.3 Kgs 3975.20 1000 Kgs 13.12
White Cement for pointing 0.2 Kgs 27.00 1 Kgs 5.40
Labour
1st Class Mason 0.096 Nos. 588.00 1 Each 56.45
2nd Class Mason 0.224 Nos. 528.00 1 Each 118.27
Man Mazdoor 0.33 Nos. 480.00 1 Each 158.40
Add water charges @1% on labour 1% 642.12 6.42
Material
S&F Vinyl Flooring with Tiles 1.5mm thick in 1 Sqmt. 327.00 1 Sqmt. 327.00
rolls
Add 13.615% over heads 0.13615 327.00 44.52
Basic rate per 1 Sqmt. 371.52
52 Whiting to new walls and ceiling in two coats
with Surya cem or equavalent quality to give
an even shade after thoroughly brushing the
surface to remove all loose powdered materials
including cost and conveyance of all materials
and water to site, sales & other taxes, all
operational, incidental and labour charges such
as cleaning the surface, painting, curing etc.,
complete for finished item of work for internal
walls. (APSS No.901 & 908) in All Floors
Material
Cement Primer Grade I 0.35 Kgs 141.00 1 Kgs 49.35
Labour for Priming Coat
1st class painter 0.05 Nos. 660.00 1 Each 33.00
Man and women mazdoor 0.15 Nos. 480.00 1 Each 72.00
154.35
Add 13.615% over heads 0.13615 154.35 21.01
Rater per 1 Sqmt. for all floors Total 175.40
Material
Cement Primer Grade I 0.1 Kgs 141.00 1 Kgs 14.10
Snowcem Paint 0.35 Kgs 19.60 1 Kgs 6.86
Labour for Priming Coat
Material
Supply of wall putty of White Cement or 2.3 Kgs 35.65 1 Kgs 82.00
Polymer or Cement based (BMT-J.40)
Labour for Two Coats
1st class painter 0.0273 Nos. 660.00 1 Each 18.02
2nd class painter 0.0637 Nos. 528.00 1 Each 33.63
Light mazdoor 0.091 Nos. 480.00 1 Each 43.68
177.33
Add 13.615% over heads 0.13615 177.33 24.14
Rater per 1 Sqmt. for all floors Total 201.50
Material
Supply of water based Cement primer of 0.1 Kgs 180.00 1 Kgs 18.00
exterior grade-2 (BMT-J.02)
Supply of water proof Cement paint pack 0.35 Kgs 19.60 1 Kgs 6.86
(BMT-J.26)
Labour for Priming Coat
1st class painter 0.021 Nos. 660.00 1 Each 13.86
2nd class painter 0.049 Nos. 528.00 1 Each 25.87
Labour for Two Coats
1st class painter 0.015 Nos. 660.00 1 Each 9.90
2nd class painter 0.035 Nos. 528.00 1 Each 18.48
Material
Supply of water based Cement primer of 0.05 Kgs 77.00 1 Kgs 3.85
internal grade-1 (BMT-J.01)
Supply of acrylic based Oil bound washabale 0.17 Kgs 19.60 1 Kgs 3.33
Distemper (BMT-J.26)
Labour for Priming Coat
1st class painter 0.008 Nos. 660.00 1 Each 5.28
2nd class painter 0.019 Nos. 528.00 1 Each 10.03
Labour for Two Coats
1st class painter 0.036 Nos. 660.00 1 Each 23.76
2nd class painter 0.084 Nos. 528.00 1 Each 44.35
Man and women mazdoor 0 Nos. 480.00 1 Each 0.00
90.61
Add 13.615% over heads 0.13615 90.61 12.34
Rater per 1 Sqmt. for all floors Total 102.95
54.67
Add 13.615% over heads 0.13615 54.67 7.44
Rater per 1 Sqmt. for all floors Total 62.15
Cost of 110mm dia PVC Pipe.(page 312) 3.00 Rmt. 163.00 1 Rmt 489.00
Cost of P.V.C.Bend 391 BMW-G.57 1.00 No. 70.00 1 No 70.00
Cost PVC shoe 397 BMW-G.63 1.00 No. 59.00 1 No 59.00
Cost of Clips 440 BMW-G.106 3.00 Nos. 15.00 1 No 45.00
Plumber 1st Class 0.30 Nos. 588.00 1 Each 176.40
Plumber 2nd class 0.70 Nos. 528.00 1 Each 369.60
Man Mazdoor 1.00 No. 480.00 1 Each 480.00
Rate per 3 Rmt. 1689.00
563.00
Add 13.615% over heads 0.13615 563.00 76.65
Rate per Rmt. Total 639.65
materials
Costof rabit wire mesh 1.33 Sqmt 15.00 1 Sqmt 19.95
43 Grade cement 31.91 Kgs 3975.20 1000 Kgs 126.85
Cost of coarse sand 0.06 Cum 216.18 1 Cum 12.54
Labour
1st Class Mason 0.80 Nos. 588.00 1 Each 470.40
Miller operator 1.00 Nos. 588.00 1 Each 588.00
PRIMARY COAT
Luppam finish 0.1 Kg. 117.00 1 Kg 11.70
Ready mixed primer 0.07 lit 130.00 1 Lt 9.10
Ist class painter 0.021 Nos. 660.00 1 Each 13.86
2nd class painter 0.049 Nos. 528.00 1 Each 25.87
TWO COATS OF PAINTING
Synthetic enamel paint 0.12 lit 172.00 1 lit 20.64
1st class painter 0.036 Nos. 660.00 1 Each 23.76
2nd class painter 0.084 Nos. 528.00 1 Each 44.35
149.28
Add 13.615% over heads 0.13615 149.28 20.33
Rate per 1 Sqmt. for all Floors Total 169.65
66 Painting to old Wood work with two coats of
ready mixed synthetic enamel paint first quality
all shades over an existing steel primer
including cost and conveyance of all materials
to site, sales & other taxes, incidental,
operational and all labour charges etc., complete
for finished item of work. (APSS No. 1201,
1207 & 1212).in All Floors (BLD-CSTN-12-
12 - 196)
Unit = 1 Sqmt
A ) material
cost of 6mm thick corregated AC sheets 1.05 Sqmt 204.00 1 Sqmt 214.20
8mm dia G.I.J bolts & nuts 2.2 Nos. 9.00 1 Each 19.80
G.I washersBitumen washers 2.2 Nos. 2.00 1 Each 4.40
Bitumen washers 2.2 Nos. 2.00 1 Each 4.40
B) labour
Carpenter II class 0.043 Nos. 588.00 1 Each 25.28
Man Mazdoor 0.054 Nos. 480.00 1 Each 25.92
Sundries including 50 x 6 mm Iron wind ties 0.00
and white lead etc.,
294.00
Rate per 1 Sqmt. for all Floors 294.00
Add 13.615% over heads 0.13615 40.03
Rate per one Sqmt 334.05
Cost of MS Square Pipe 75 x 75 x 2.30 mm dia 5.14 Kgs. 52.00 1 Kgs. 267.28
asper (BMT-F.04)
Fabrication, Cutting and Fixing charges 5.14 Kgs. 24.00 1 Kgs. 123.36
(BMM-V.16)
390.64
Add 13.615% over heads 0.13615 390.64 53.19
Rate per Rmt. 443.85
Cost of MS Pipe 50mm dia asper (BMT-F.04) 5.1 Kgs. 52.00 1 Kgs. 265.20
Fabrication, Cutting and Fixing charges 5.1 Kgs. 24.00 1 Kgs. 122.40
(BMM-V.16)
387.60
Add 13.615% over heads 0.13615 387.60 52.77
Rate per Rmt. 440.40
1298.66
Add 13.615% over heads 0.13615 1298.66 176.81
Rater per 10 Sqmt. for all floors Total 1475.50
Rater per 1 Sqmt. for all floors 147.55
Cost of washable oil bound distemper 1.7 Ltr. 77.00 1 Ltr. 130.90
1st class painter 0.36 Nos. 660.00 1 Each 237.60
2nd class painter 0.84 Nos. 528.00 1 Each 443.52
Sundries including brushes , ladders etc., @ 1% 1% 812.02 1 8.12
820.14
Add 13.615% over heads 0.13615 820.14 111.66
Rater per 10 Sqmt. for all floors Total 931.85
Rater per 1 Sqmt. for all floors 93.00
Cost of alluminium sheet 24 Gauge BMS-W.18 1.00 Sqm 256.00 1 Sqm 256.00
Add for labour charges including cost 6.60 Rm 10.00 1 Rm 66.00
of nails, making holes to wall and in aluminium
sheet etc..
322.00
Add 13.615% over heads 0.14 322.00 43.84
Rate per 1 Sqm 365.85
81 Providing and Fixing of expansion joint filler
board for Buildings , Columns , Beams and
Slabs Armour Board " sillfill including cost and
convenyance of all materials to site, all
incidental, operational , labour charges etc.,
complete for finished item of work as per
approved drawing for all floors
As per SSR Item No : (Rate as per PH SOR P. 10 Rmt 349.00 1 Rmt 3490.00
No. 20, Table No. 1)
Add collars : (Rate as per PH SOR P. No. 21, 3 Nos 89.00 1 Nos 267.00
Table No. 2)
Labour charges for laying & jointing 10 Rmt 288.00 1 Rmt 2880.00
(Rate as per SOR 2014-15, P. I & IV, P. No. 56
(3) of 11 b)
Rate per 10 Rmt. 134.4 6637.00
Rate per 1 Rmt. 663.70
Add 13.615% over heads 0.13615 90.36
Rate per 1 Rmt. 754.10
As per PH SSR Table No. 2 (page 20) 1 No., 3385.00 1 No., 3385.00
Add collars (page 282) 0 Nos 1131.00 1 Nos 0.00
Labour charges for laying & jointing 1 Rmt 1152.00 1 Rmt 1152.00
(Rate as per SOR 2018-19, P. I & IV, P. No. 4,
11 b)
Rate per 1 No., 4537.00
Rate per 1 No., 4537.00
Add 13.615% over heads 0.13615 617.71
Rate per 1 No., 5154.75
Materials
High polished granite 16 to 18mm thick 10.50 Sqm 2698.57 1 sqm Sqm 28334.99
corese sand for C.M. 1:8 0.20 Cum 216.18 1 cum Cum 43.24
Cement for CM1: 8 base coat 36.00 Kgs 3975.20 1000 kgs Kgs 143.11
Cement for slurry 33.00 Kgs 3975.20 1000 kgs Kgs 131.18
Cement for joining 6.00 Kgs 3975.20 1000 kgs Kgs 23.85
Labour
1 st class mason 3.00 Nos 588.00 each Nos 1764.00
2nd class mason 1.00 Nos 528.00 each Nos 528.00
Man Mazdoor 8.00 Nos 480.00 each Nos 3840.00
Add water charges @1% on labour 1% 34808.37 1 348.08
35156.45
Rete per 1 sqm 3515.65
Add 13.615% over heads 0.13615 478.66
Rete per 1 sqm 3994.35
92 Half Rounding the edges of granite slab
including polishing all labour charges, hire
charegs of tools and plants All incidental
charges etc., complete for finished item of work
as directed by the engineer incharge
Unit = 10 sqm
A) Chlorpyriphos/ Lindane emulsifiable
concentrate of 20%
1 liter : 19 Parts water Therefore: 868.55 L /20 4.100 Lit 217 1 Lit 889.70
(Rate as per Bldg. SOR 2013-14, P. No. 1009,
Sl. No. 953, Item code. BMS-W.09)
Add 12%wastage 0.41 Liters 217 1 Liters 88.89
Total Quantity 4.51
B) Add Water Charges @ 1% 1% 978.59 9.79
C) Labour Charges
Man Mazdoor 3.0 day 480.00 1 day 1440.00
Sprayer 0.22 day 528.00 1 day 116.16
D) Hire charges
Sprayer, drilling machine etc 10% 1556.16 1 155.62
sundries & contingencies 3% 1556.16 1 46.68
Water charges & electricity 1.50% 1556.16 1 23.34
Add OH & CP 0.13615 2770.18 1 377.16
Rate per 10 Sqm 3147.34
Rate per 1 Sqm 314.73
a) 101.60 mm dia SWG pipe upto 3' depth BMW-A.02 1.00 Rmt 376.00 1.00 Rmt 376.00
Area allowence on labour charges BMW-A.05 20% 232.00 1.00 0.00 46.40
422.40
add overheads @ 0.13615 57.51
Total rate per 1 Rmt 479.95
b) 152.40mm dia SWG pipe upto 5' depth BMW-A.03 1.00 Rmt 559.00 1.00 Rmt 559.00
Area allowence on labour charges BMW-A.06 20% 288.00 1.00 0.00 57.60
616.60
add overheads @ 0.13615 83.95
Total rate per 1 Rmt 700.55
c 101.60 mm dia SWG pipe upto 5' depth BMW-A.01 1.00 Rmt 378.00 1.00 Rmt 378.00
Area allowence on labour charges BMW-A.06 20% 288.00 1.00 0.00 57.60
435.60
add overheads @ 0.13615 59.31
Total rate per 1 Rmt 494.95
152.40mm dia SWG pipe upto 3' depth BMW-A.04 1.00 Rmt 550.00 1.00 Rmt 550.00
Area allowence on labour charges BMW-A.05 20% 232.00 1.00 0.00 46.40
596.40
add overheads @ 0.13615 81.20
Total rate per 1 Rmt 677.60
basic rate as per ssr item BMW-B.03 1.00 Nos 5518.00 1.00 Nos 5518.00
Area allowence on labour charges 20% 0.00 1.00 0.00 0.00
5518.00
add overheads @ 0.13615 751.28
Total rate per 1 Nos 6269.30
basic rate as per ssr item BMW-B.04 1.00 Nos 8619.00 1.00 Nos 8619.00
Area allowence on labour charges 20% 0.00 1.00 0.00 0.00
8619.00
add overheads @ 0.13615 1173.48
Total rate per 1 Nos 9792.50
basic rate as per ssr item BMW-B.02 1.00 Nos 8965.00 1.00 Nos 8965.00
Area allowence on labour charges 20% 0.00 1.00 0.00 0.00
8965.00
add overheads @ 0.13615 1220.58
Total rate per 1 Nos 10185.60
basic rate as per ssr item BMW-B.01 1.00 Nos 5697.00 1.00 Nos 5697.00
Area allowence on labour charges 20% 0.00 1.00 0.00 0.00
5697.00
add overheads @ 0.13615 775.65
Total rate per 1 Nos 6472.65
Basic rate as per ssr item BMW-A.72 1.00 Nos 485.00 1.00 Nos 485.00
Area allowence on labour charges BMW-A.74 20% 30.00 1.00 0.00 6.00
491.00
add overheads @ 0.13615 66.85
Total rate per 1 Nos 557.85
A Basic rate as per ssr item BMW-D.24 1.00 Nos 1566.00 1.00 Nos 1566.00
Area allowence on labour charges BMW-D.28 20% 319.00 1.00 0.00 63.80
1629.80
add overheads @ 0.13615 221.90
Total rate per 1 Nos 1851.70
B Basic rate as per ssr item 12.7MM DIA PVC
conection with brass union nut CP coated BMW-I.48 1.00 Nos 86.00 1.00 Nos 86.00
Area allowence on labour charges BMW-I.49 20% 17.00 1.00 0.00 3.40
89.40
A Basic rate as per ssr item BMW-D.23 1.00 Nos 2551.00 1.00 Nos 2551.00
Area allowence on labour charges BMW-D.28 20% 319.00 1.00 0.00 63.80
2614.80
add overheads @ 0.13615 356.01
Total rate per 1 Nos 2970.85
Basic rate as per ssr item BMW-I.28 1.00 Nos 208.00 1.00 Nos 208.00
Area allowence on labour charges BMW-I.29 20% 12.00 1.00 0.00 2.40
210.40
add overheads @ 0.13615 28.65
Total rate per 1 Nos 239.05
Basic rate as per ssr item BMW-I 105 1.00 Nos 452.00 1.00 Nos 452.00
Area allowence on labour charges BMW-I.106 20% 116.00 1.00 0.00 23.20
475.20
add overheads @ 0.13615 64.70
Total rate per 1 Nos 539.90
a) 300 grams
Basic rate as per ssr item BMW-E.09 1.00 Nos 223.00 1.00 Nos 223.00
Area allowence on labour charges BMW-E.10 20% 29.00 1.00 0.00 5.80
228.80
add overheads @ 0.13615 31.15
Total rate per 1 Nos 259.95
b) 400 gms
Basic rate as per ssr item BMW-E 07 1.00 Nos 349.00 1.00 Nos 349.00
Area allowence on labour charges BMW-E 08 20% 29.00 1.00 0.00 5.80
354.80
add overheads @ 0.13615 48.31
Total rate per 1 Nos 403.15
Basic rate as per ssr item BMW-G.55 1.00 No., 42.00 1.00 No., 42.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
42.00
add overheads @ 0.13615 5.72
Total rate per 1 RMT 47.75
Basic rate as per ssr item BMW-G.56 1.00 No., 59.00 1.00 No., 59.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
59.00
add overheads @ 0.13615 8.03
Total rate per 1 RMT 67.05
Basic rate as per ssr item BMW-G.57 1.00 No., 70.00 1.00 No., 70.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
70.00
add overheads @ 0.13615 9.53
Total rate per 1 RMT 79.55
22 Supply and fixing of 75 mm dia - Bend 45 Degree -
UPVC/SWR Pipe fittings
Basic rate as per ssr item BMW-G.61 1.00 No., 33.00 1.00 No., 33.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
33.00
add overheads @ 0.13615 4.49
Total rate per 1 No., 37.50
Basic rate as per ssr item BMW-G.62 1.00 No., 46.00 1.00 No., 46.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
46.00
add overheads @ 0.13615 6.26
Total rate per 1 No., 52.30
Basic rate as per ssr item BMW-G.63 1.00 No., 59.00 1.00 No., 59.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
59.00
add overheads @ 0.13615 8.03
Total rate per 1 No., 67.05
Basic rate as per ssr item BMW-G.58 1.00 No., 57.00 1.00 No., 57.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
57.00
add overheads @ 0.13615 7.76
Total rate per 1 No., 64.80
Basic rate as per ssr item BMW-G.59 1.00 No., 80.00 1.00 No., 80.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
80.00
add overheads @ 0.13615 10.89
Total rate per 1 No., 90.90
Basic rate as per ssr item BMW-G.60 1.00 No., 91.00 1.00 No., 91.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
91.00
add overheads @ 0.13615 12.39
Total rate per 1 No., 103.40
Basic rate as per ssr item BMW-G.67 1.00 No., 50.00 1.00 No., 50.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
50.00
add overheads @ 0.13615 6.81
Total rate per 1 No., 56.85
Basic rate as per ssr item BMW-G.68 1.00 No., 75.00 1.00 No., 75.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
75.00
add overheads @ 0.13615 10.21
Total rate per 1 No., 85.25
Basic rate as per ssr item BMW-G.69 1.00 No., 91.00 1.00 No., 91.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
91.00
add overheads @ 0.13615 12.39
Total rate per 1 No., 103.40
Basic rate as per ssr item BMW-G.70 1.00 No., 62.00 1.00 No., 62.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
62.00
add overheads @ 0.13615 8.44
Total rate per 1 No., 70.45
Basic rate as per ssr item BMW-G.71 1.00 No., 91.00 1.00 No., 91.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
91.00
add overheads @ 0.13615 12.39
Total rate per 1 No., 103.40
Basic rate as per ssr item BMW-G.72 1.00 No., 110.00 1.00 No., 110.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
110.00
add overheads @ 0.13615 14.98
Total rate per 1 No., 125.00
Basic rate as per ssr item BMW-G.73 1.00 No., 96.00 1.00 No., 96.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
96.00
add overheads @ 0.13615 13.07
Total rate per 1 No., 109.10
Basic rate as per ssr item BMW-G.74 1.00 No., 155.00 1.00 No., 155.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
155.00
add overheads @ 0.13615 21.10
Total rate per 1 No., 176.10
Basic rate as per ssr item BMW-G.75 1.00 No., 183.00 1.00 No., 183.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
183.00
Basic rate as per ssr item BMW-G.76 1.00 No., 128.00 1.00 No., 128.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
128.00
add overheads @ 0.13615 17.43
Total rate per 1 No., 145.45
Basic rate as per ssr item BMW-G.77 1.00 No., 242.00 1.00 No., 242.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
242.00
add overheads @ 0.13615 32.95
Total rate per 1 No., 274.95
Basic rate as per ssr item BMW-G.78 1.00 No., 237.00 1.00 No., 237.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
237.00
add overheads @ 0.13615 32.27
Total rate per 1 No., 269.30
Basic rate as per ssr item BMW-G.79 1.00 No., 63.00 1.00 No., 63.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
63.00
add overheads @ 0.13615 8.58
Total rate per 1 No., 71.60
Basic rate as per ssr item BMW-G.80 1.00 No., 100.00 1.00 No., 100.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
100.00
add overheads @ 0.13615 13.62
Total rate per 1 No., 113.65
Basic rate as per ssr item BMW-G.81 1.00 No., 115.00 1.00 No., 115.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
115.00
add overheads @ 0.13615 15.66
Total rate per 1 No., 130.70
Basic rate as per ssr item BMW-G.82 1.00 No., 80.00 1.00 No., 80.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
80.00
add overheads @ 0.13615 10.89
Total rate per 1 No., 90.90
Basic rate as per ssr item BMW-G.83 1.00 No., 126.00 1.00 No., 126.00
Basic rate as per ssr item BMW-G.84 1.00 No., 145.00 1.00 No., 145.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
145.00
add overheads @ 0.13615 19.74
Total rate per 1 No., 164.75
Basic rate as per ssr item BMW-G.97 1.00 No., 8.00 1.00 No., 8.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
8.00
add overheads @ 0.13615 1.09
Total rate per 1 No., 9.10
Basic rate as per ssr item BMW-G.98 1.00 No., 12.00 1.00 No., 12.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
12.00
add overheads @ 0.13615 1.63
Total rate per 1 No., 13.65
Basic rate as per ssr item BMW-G.99 1.00 No., 14.00 1.00 No., 14.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
14.00
add overheads @ 0.13615 1.91
Total rate per 1 No., 15.95
Basic rate as per ssr item BMW-G.48 1.00 RM 150.00 3.00 RMT 50.00
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
50.00
add overheads @ 0.13615 6.81
Total rate per 1 RMT 56.85
Basic rate as per ssr item BMW-G.49 1.00 RM 220.00 3.00 RMT 73.33
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
73.33
add overheads @ 0.13615 9.98
Total rate per 1 RMT 83.35
(c) 110mm dia 3 Mts Double Socket PVC/SWR pipe - 6
Kg/sq.cm
Basic rate as per ssr item BMW-G.50 1.00 RM 266.00 3.00 RMT 88.67
Area allowence on labour charges BMW 20% 0.00 1.00 0.00 0.00
88.67
add overheads @ 0.13615 12.07
Total rate per 1 RMT 100.75
51 Manufacture, Supply and Delivery of Unplasticised
PVCs Pipes for potable water supplies conforming to
IS : 4985/2000 (3rd revision) with bell ends (Socket)
as per specification in light Grey/Natural Ivory Grey/
Any other Color (except White) inclusive of
transportation to the sub-divisional stores anywhere
in AP excluding taxes - 160 mm dia UPVC pipe 6
Kgs/Cm2
f) 65 mm GM peet valve
Basic rate as per ssr item BMW-F.29 1.00 Nos 4868.00 1.00 Nos 4868.00
Area allowence on labour charges BMW-F.30 0% 112.00 1.00 0.00 0.00
4868.00
add overheads @ 0.13615 662.78
Total rate per 1 No 5530.80
c) 40 mm PPR tee
Basic rate as per ssr item BMW-I 287 1.00 Nos 76.00 1.00 Nos 76.00
Area allowence on labour charges BMW-F.26 20% 67.00 1.00 0.00 13.40
89.40
add overheads @ 0.13615 12.17
Total rate per 1 No 101.60
d) 50 mm PPR tee
Basic rate as per ssr item BMW-I 288 1.00 Nos 135.00 1.00 Nos 135.00
Area allowence on labour charges BMW-F28 20% 90.00 1.00 0.00 18.00
153.00
add overheads @ 0.13615 20.83
Total rate per 1 No 173.85
e 63 mm PPR tee
Basic rate as per ssr item BMW-I 289 1.00 Nos 275.00 1.00 Nos 275.00
Area allowence on labour charges BMW-F.30 20% 112.00 1.00 0.00 22.40
297.40
add overheads @ 0.13615 40.49
Total rate per 1 No 337.90
c) 40 mm PPR Elbow
d) 50 mm PPR Elbow
Basic rate as per ssr item BMW-I 279 1.00 Nos 119.00 1.00 Nos 119.00
Area allowence on labour charges BMW-F28 20% 90.00 1.00 0.00 18.00
137.00
add overheads @ 0.13615 18.65
Total rate per 1 No 155.65
e 63 mm PPR Elbow
Basic rate as per ssr item BMW-I 280 1.00 Nos 232.00 1.00 Nos 232.00
Area allowence on labour charges BMW-F.30 20% 112.00 1.00 0.00 22.40
254.40
add overheads @ 0.13615 34.64
Total rate per 1 No 289.05
Basic rate as per ssr item BMW-I.361 1.00 Nos 505.00 1.00 Nos 505.00
Area allowence on labour charges BMW-F.22 20% 44.00 1.00 0.00 8.80
513.80
add overheads @ 0.13615 69.95
Total rate per 1 No 583.75
Basic rate as per ssr item BMW-I.362 1.00 Nos 706.00 1.00 Nos 706.00
Area allowence on labour charges BMW-F.22 20% 44.00 1.00 0.00 8.80
714.80
add overheads @ 0.13615 97.32
Total rate per 1 No 812.15
Basic rate as per ssr item BMW-I.364 1.00 Nos 1737.00 1.00 Nos 1737.00
Area allowence on labour charges BMW-F.22 20% 44.00 1.00 0.00 8.80
1745.80
add overheads @ 0.13615 237.69
Total rate per 1 No 1983.50
Basic rate as per ssr item BMW-D.33 1.00 Nos 810.00 1.00 Nos 810.00
Area allowence on labour charges BMW-D.36 20% 127.00 1.00 0.00 25.40
835.40
add overheads @ 0.13615 113.74
Total rate per 1 No 949.15
Basic rate as per ssr item BMW-D.34 1.00 Nos 2385.00 1.00 Nos 2385.00
Area allowence on labour charges BMW-D.36 20% 127.00 1.00 0.00 25.40
2410.40
add overheads @ 0.13615 328.18
Total rate per 1 No 2738.60
Basic rate as per ssr item BMW-i.63 1.00 Nos 68.00 1.00 Nos 68.00
Area allowence on labour charges BMW-i.64 20% 22.00 1.00 0.00 4.40
72.40
add overheads @ 0.13615 9.86
Total rate per 1 No 82.30
Basic rate as per ssr item BMW-A.72 1.00 Nos 485.00 1.00 Nos 485.00
Area allowence on labour charges BMW-A.74 20% 30.00 1.00 0.00 6.00
491.00
add overheads @ 0.13615 66.85
Total rate per 1 No 557.85
Basic rate as per ssr item BMW-D.04 1.00 Nos 1399.00 1.00 Nos 1399.00
Area allowence on labour charges BMW-D.06 20% 377.00 1.00 0.00 75.40
1474.40
add overheads @ 0.13615 200.74
Total rate per 1 No 1675.15
Providing brick masonry seat
BMW-d.09 1.00 Nos 278.00 1.00 Nos 278.00
add overheads @ 0.13615 37.85
Total cost (A +B) 1991.00
Basic rate as per ssr item BMW-d.04 1.00 Nos 1399.00 1.00 Nos 1399.00
Area allowence on labour charges BMW-d.06 20% 377.00 1.00 0.00 75.40
Supply and Fixing 10 Litres capacity Single Flush
white PVC low level flushing system parryware,
slimline with internal components and short bend
including cost and conveyance of all materials to site,
all labour charges, sales and other taxes on all
materials etc., complete for finished item of work for
all floors.
Initial cost SSR item No 319
BMW-G.08 1.00 Nos 1254.00 1.00 Nos 1254.00
Labour charges only for fixing low down porcelain
flushing tank with internal components
BMW-d.12 1.00 Nos 528.00 1.00 Nos 528.00
Area allowence on labour charges 20% 0.00 1.00 0.00 0.00
3256.40
add overheads @ 0.13615 443.36
Total rate per 1 No including flush tank 10 Ltrs 3699.80
Basic rate as per ssr item BMW-d.14 1.00 Nos 1703.00 1.00 Nos 1703.00
Labour charges only for fixing European Water Closet
with 'P' or 'S' trap as per standard practice BMW-d.15 1.00 Nos 264.00 1.00 Nos 264.00
Area allowence on labour charges BMW-d-15 20% 264.00 1.00 0.00 52.80
Supply and Fixing 10 Litres capacity Single Flush
white PVC low level flushing system parryware,
slimline with internal components and short bend
including cost and conveyance of all materials to site,
all labour charges, sales and other taxes on all
materials etc., complete for finished item of work for
all floors.
Initial cost SSR item No 319
BMW-G.08 1.00 Nos 1254.00 1.00 Nos 1254.00
Area allowence on labour charges 20% 0.00 1.00 0.00 0.00
3273.80
add overheads @ 0.13615 445.73
Total rate per 1 No including flush tank 10 Ltrs 3719.55
Basic rate as per ssr item BMW-D.18 1.00 No., 8260.00 1.00 No., 8260.00
Labour charges only for fixing Indian makeFlat Back BMW-D.28 1.00 No., 319.00 1.00 No., 319.00
Wash Hand Basin with waste fittings like rubber plug,
chain,32 mm nominal size C.P. Fitting Pillar Taps
complete with standard CI brackets including wooden
block
Area allowence on labour charges BMW-D.28 20% 319.00 1.00 0.00 63.80
8642.80
add overheads @ 0.13615 1176.72
Total rate per 1 No., 9819.55
Basic rate as per ssr item BMW-g.01 1.00 Lit 5.00 1.00 Lit 5.00
Area allowence on labour charges BMW-g.02 20% 1.00 1.00 0.00 0.20
5.20
add overheads @ 0.13615 0.71
Total rate per 1 Ltr 5.95
Basic rate as per ssr item BMW-D.40 1.00 Nos 704.00 1.00 Nos 704.00
Area allowence on labour charges BMW-D.41 20% 225.00 1.00 0.00 45.00
749.00
add overheads @ 0.13615 101.98
Total rate per 1 No 851.00
Basic rate as per ssr item BMW-I.119 1.00 Nos 6471.00 1.00 Nos 6471.00
Area allowence on labour charges BMW-I.120 20% 506.00 1.00 0.00 101.20
6572.20
add overheads @ 0.13615 894.81
Total rate per 1 No 7467.05
Basic rate as per ssr item BMW-I.130 1.00 Nos 633.00 1.00 Nos 633.00
Area allowence on labour charges BMW-I.120 20% 506.00 1.00 0.00 101.20
734.20
add overheads @ 0.13615 99.96
Total rate per 1 No 834.20
Basic rate as per ssr item BMW-H.05 1.00 Nos 1902 1.00 Nos 1902.00
Area allowence on labour charges BMW- 20% 0.00 1.00 0.00 0.00
1902.00
add overheads @ 0.13615 258.96
Total rate per 1 No 2161.00
94 Supply and Fixing of Vent Cowls 90 mn dia with
all necessary requirements including all
operational , incidental sales and other taxes
and all labour charges etc., complete including
cost and convenyance of all materials complete
for finished item of work for all Floors.
Basic rate as per ssr item BMW-G.99 1.00 Nos 14.00 1.00 Nos 14.00
Area allowence on labour charges BMW-I.37 20% 14.00 1.00 0.00 2.80
16.80
add overheads @ 0.13615 2.29
Total rate per 1 No 19.10
102 Supply & Fixing 3" dia (75 mm) UPVC Plug
(Door) bends 1st quality ISI marked conforming
to IS with cement caulked joints and fixing as
per site requirements with standard practice
including cost and conveyance of all materials
to site, all labour charges, sales and other
taxes on all materials etc., complete for
finished item of work for all floors
Initial cost SSR item No 73
Basic rate as per ssr item BMW-C.11 1.00 Nos 322.00 1.00 Nos 322.00
Area allowence on labour charges BMW-C.14 20% 72.00 1.00 0.00 14.40
336.40
add overheads @ 0.13615 45.80
Total rate per 1 No 382.20
PH SSR P. 76.63
75 table 27 1.00 Kg 1.00 Kg 76.63
add overheads @ 0.13615 10.43
Total rate per 1 Kg 87.10
b) b. 80mm dia x 1.00 CI D/F pipes initiate cost only
PH SSR P. 76.63
75 table 27 1.00 Kg 1.00 Kg 76.63
add overheads @ 0.13615 10.43
Total rate per 1 Kg 87.10
c. 80mm dia x flonged spigot CI tail pieces
PH SSR P. 76.63
75 table 27 1.00 Kg 1.00 Kg 76.63
add overheads @ 0.13615 10.43
Total rate per 1 Kg 87.10
d. 80mm dia CI sluice valves
page 380 1.00 nos 4468.00 1.00 nos 4468.00
add overheads @ 0.13615 608.32
Total rate per 1 Nos 5076.35
e. 80mm dia CI duct foot bends
Page 380
table 26 1.00 Kg 76.63 1.00 Kg 76.63
add overheads @ 0.13615 10.43
Total rate per 1 Kg 87.10
f. Rubber packing 3/6mm thick
table 33 1.00 kg 93.00 1.00 kg 93.00
add overheads @ 0.13615 12.66
Total rate per 1 Kg 105.70
g. Bolts & nuts
table 33,
Sl. No. 5 1.00 Kg 111.00 1.00 Kg 111.00
add overheads @ 0.13615 15.11
Total rate per 1 Kg 126.15
Basic rate as per ssr item BMW-d.14 1.00 Nos 1703.00 1.00 Nos 1703.00
Plastic seat & lid as per IS 2548-1996
BMW-d 16 1.00 Nos 766.00 1.00 Nos 766.00
Supply and Fixing 10 Litres capacity Single Flush
white PVC low level flushing system parryware,
slimline with internal components and short bend
including cost and conveyance of all materials to site,
all labour charges, sales and other taxes on all
materials etc., complete for finished item of work for
all floors.
BMW-G.08 1.00 Nos 1254.00 1.00 Nos 1254.00
3723.00
add overheads @ 0.13615 506.89
e 65 mm GM peet valve
Basic rate as per ssr item BMW-F.29 1.00 Nos 4868.00 1.00 Nos 4868.00
Area allowence on labour charges BMW-F.30 0% 112.00 1.00 0.00 0.00
4868.00
add overheads @ 0.13615 662.78
Total rate per 1 No 5530.80
Basic rate as per ssr item BMW-I.161 1.00 Nos 1164.00 1.00 Nos 1164.00
0% 0.00 1.00 0.00 0.00
1164.00
add overheads @ 0.13615 158.48
Total rate per 1 No 1322.50
Basic rate as per ssr item BMW-I.185 1.00 Nos 646.00 1.00 Nos 646.00
0% 0.00 1.00 0.00 0.00
646.00
add overheads @ 0.13615 87.95
Total rate per 1 No 733.95
2138.00
add overheads @ 0.13615 291.09
Total rate per 1 No 2429.10
880.00
add overheads @ 0.13615 119.81
Total rate per 1 Rm 999.85
678.00
add overheads @ 0.13615 92.31
Total rate per 1 Rm 770.35
Basic rate as per ssr item BMW-I.156 1.00 No., 12584.00 1.00 No., 12584.00
12584.00
add overheads @ 0.13615 1713.31
Total rate per 1 No., 14297.35
114 Supply and fixing wall mirror with provision for over
head shower and 115 mm long bend pipe with wall
flange Jaquar make queen series with 7 years
warranty: Ivory gold / Jupiter Aqua Lines-JALor
equivalent series & Supply & fixing overhead shower
rose with revolving joint and 150 mm long swivel
shower arm Jaquar make queen series. with 7 years
warranty: IvoryGold / Jupiter Aqua Lines-JALor
equivalent series
Cost of wall mixeer two in one BMW-I.153 1.00 No., 7469.00 1.00 No., 7469.00
Over head shower rose BMW-I.155 1.00 No., 3228.00 1.00 No., 3228.00
10697.00
add overheads @ 0.13615 1456.40
Total rate per 1 No., 12153.40
547.00
add overheads @ 0.13615 74.47
Total rate per 1 No., 621.50
525.00
add overheads @ 0.13615 71.48
Total rate per 1 No., 596.50
Basic rate as per ssr item BMW-I.170 1.00 No., 2769.00 1.00 No., 2769.00
2769.00
add overheads @ 0.13615 377.00
Total rate per 1 No., 3146.00
118 Supply & fixing bib cock cum health faucet with 1 m
long flexible tube and wall hook of Jaquar make
queen series with 7 years warranty: Ivory gold/ Jupiter
Aqua Lines-JALor equivalent series
Basic rate as per ssr item BMW-I.142 1.00 No., 6319.00 1.00 No., 6319.00
6319.00
add overheads @ 0.13615 860.33
Total rate per 1 No., 7179.35
327.00
add overheads @ 0.13615 44.52
Total rate per 1 No., 371.55
Basic rate as per ssr item BMW-I.138 1.00 No., 301.00 1.00 No., 301.00
301.00
add overheads @ 0.13615 40.98
Total rate per 1 No., 342.00
Basic rate as per ssr item BMW-I.144 1.00 No., 2658.00 1.00 No., 2658.00
2658.00
add overheads @ 0.13615 361.89
Total rate per 1 No., 3019.90
Basic rate as per ssr item BMW-I.149 1.00 No., 2484.00 1.00 No., 2484.00
2484.00
add overheads @ 0.13615 338.20
Total rate per 1 No., 2822.20
Basic rate as per ssr item BMW-I.146 1.00 No., 2976.00 1.00 No., 2976.00
2976.00
add overheads @ 0.13615 405.18
Total rate per 1 No., 3381.20
3684.80
add overheads @ 0.13615 501.69
Total rate per 1 No., 4186.50
3817.00
70.00
add overheads @ 0.13615 9.53
Total rate per 1 No., 79.55
127 Supply and Delivery of Unplasticised PVCs Pipes for
potable water supplies conforming to IS : 4985/2000
(3rd revision) with bell ends (Socket) as per
specification in light Grey/Natural Ivory Grey/ Any
other Color (except White) inclusive of transportation
to the sub-divisional stores anywhere in AP excluding
Excise duty and Sales Tax etc