Documente Academic
Documente Profesional
Documente Cultură
com
Note: These parts available for sale to North American locations only.
Amp Rating
3 Pole
100,000
20,000
30,000
40,000
50,000
60,000
70,000
80,000
90,000
10,000
1000
2000
3000
4000
5000
6000
7000
8000
9000
100
200
300
400
500
600
700
800
900
50
60
70
80
90
10,000 10,000
Circuit Breaker Time/Current Curves
2 HOURS
2 HOURS
1 HOUR
rated wire (60/75˚C) per terminal. Tested in open air with
1 HOUR
2,000 2,000
M ax im um Vo lts
Breaker AC Volts
Type 60 Hz
G 3P 480
1,000 1,000
100 100
1 MINUTE
1 MINUTE
50 50
30 30
20 20
10 10
M axim um
M inim um 5
5
3 3
2 2
TIME IN SECONDS
1 1
.5 .5
TIME IN SECONDS
.3 .3
.2 .2
.1 .1
.05 .05
.03 .03
.005 .005
.003 .003
.002 .002
.001 .001
1000
2000
3000
4000
5000
6000
7000
8000
9000
100
200
300
400
500
600
700
800
900
10,000
20,000
30,000
40,000
50,000
60,000
70,000
80,000
90,000
100,000
50
60
70
80
90
GHMVD12B $76.00 NEMA 1/12 black rotary handle for G-Frame MCCB. Shaft length: 12”
FHMVD12B $76.00 NEMA 1/12 black rotary handle for F-Frame MCCB. Shaft length: 12”
HM1R12X $108.00 NEMA 4/4X black rotary handle for F-Frame MCCB. Shaft length: 12”
HM1R24X $122.00 NEMA 4/4X black rotary handle for F-Frame MCCB. Shaft length: 24”
KHMVD12B $110.00 NEMA 1/12 black rotary handle for K-Frame MCCB. Shaft length: 12”
HM3R12X $133.00 NEMA 4/4X black rotary handle for K-Frame MCCB. Shaft length: 12”
HM3R24X $148.00 NEMA 4/4X black rotary handle for K-Frame MCCB. Shaft length: 24”
LHMVD12B $127.00 NEMA 1/12 black rotary handle for L-Frame MCCB. Shaft length: 12”
HM4R12X $174.00 NEMA 4/4X black rotary handle for L-Frame MCCB. Shaft length: 12”
HM4R24X $183.00 NEMA 4/4X black rotary handle for L-Frame MCCB. Shaft length: 24”
HM1R12X
F0S06C $331.00 NEMA 1/12 flex shaft cable operator for G-Frame MCCB. Cable length: 6’
F0S03C F1S03C $331.00 NEMA 1/12 flex shaft cable operator for F-Frame MCCB. Cable length: 3’
F1S06C $360.00 NEMA 1/12 flex shaft cable operator for F-Frame MCCB. Cable length: 6’
F3S03C $395.00 NEMA 1/12 flex shaft cable operator for K-Frame MCCB. Cable length: 3’
F3S06C $417.00 NEMA 1/12 flex shaft cable operator for K-Frame MCCB. Cable length: 6’
F4S04C $452.00 NEMA 1/12 flex shaft cable operator for L-Frame MCCB. Cable length: 4’
F4S06C $522.00 NEMA 1/12 flex shaft cable operator for L-Frame MCCB. Cable length: 6’
A1X3PK
Auxiliary Contact Accessory Selection Guide
Part Number Price Description
A1X3PK $195.00 Field installable auxiliary contact for K-Frame MCCB, SPDT, 18” pigtail leads
A1X4PK $200.00 Field installable auxiliary contact for L-Frame MCCB, SPDT, 18” pigtail leads
Undervoltage Release
This product monitors a voltage (typically a line voltage) and trips the circuit breaker
when the voltage falls to between 70% and 35% of the solenoid coil rating. It consists
of a continuous rated solenoid, with a plunger and tripping lever mounted in a
plug-in module.
Note: The undervoltage release is a pre-installed accessory on G-Frame and F-Frame breakers.
GDIN
NEMA 12 Safety Door Hardware
Type C361 door interlocking safety handle kits are designed for use with AutomationDi-
rect 3P series MCCBs and flexible handle, when mounted in an SDN12, or equivalent,
enclosure. These handles secure the SDN12 enclosure, protecting against unauthor-
ized entry while the MCCB is in the ON position. Use them on enclosures with right
side flanges only and material thickness from 16 gauge through 3/16”. All mounting
hardware is included for enclosures up to 40” tall. The addition of the C361KR roller
kit is necessary for enclosures taller than 40” that require a 3-point latch. See SDN12
Handle
Enclosures section for enclosure specifications in OFF
position
Safety Door Hardware Selection Guide
Part Number Price Description
Handle length: 4”. Mounting hardware included for enclosures up to 40” tall. For Release
C361KJ4 $240.00 taller enclosures that require a 3-point latch, the C361KR (purchase separately) will Screw
also be needed.
Handle length: 6”. Mounting hardware included for enclosures up to 40” tall. For
C361KJ6 $253.00 taller enclosures that require a 3-point latch, the C361KR (purchase separately) will
also be needed.
Door Interlocking safety roller kit for use with the C361KJ4 and C361KJ6 safety
C361KR $55.00 handle kits when the SDN12 series enclosure is taller than 40 inches and 3-point
latching is required. Kit includes roller and all hardware.
Safety Handle
Note: The 1/4” x 1/2” standard mill rectangular locking bar is not supplied with these kits. The bar is
supplied with the enclosures.
shown on enclosure