Documente Academic
Documente Profesional
Documente Cultură
Recommended use: As a primer/sealer for solvent-borne as well as waterborne coating systems on walls,
ceilings, gypsum boards, concrete, masonry, wood, etc.
PHYSICAL CONSTANTS:
Colours/Shade nos: White/10000
Finish: Flat
Volume solids, %: 33 ± 1
Theoretical spreading rate: 11.0 m²/litre - 30 micron
448 sq.ft./US gallon - 1.2 mils
Flash point: 38°C/100°F
Specific gravity: 1.1 kg/litre - 9.2 lbs/US gallon
Dry to touch: 1 (approx.) hour at 20°C/68°F
The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. They are
subject to normal manufacturing tolerances and where stated, being standard deviation according to ISO 3534-1.
APPLICATION DETAILS:
Application method: Air spray Brush/Roller
Thinner (max.vol.): 08080 (30%) 08080 (15%)
Cleaning of tools: THINNER 08080
Indicated film thickness, dry: 30 micron/1.2 mils
Indicated film thickness, wet: 100 micron/4.0 mils
Recoat interval, min: 1 hour (20°C/68°F)
Recoat interval, max: None
Safety: Handle with care. Before and during use, observe all safety labels on packaging and
paint containers, consult HEMPEL Material Safety Data Sheets and follow all local or
national safety regulations. Avoid inhalation, avoid contact with skin and eyes, and do
not swallow. Take precautions against possible risks of fire or explosions as well as
protection of the environment. Apply only in well ventilated areas.
SURFACE The surface should be stable, firm, dry and free of rust and contaminants like dust, old paint, dirt,
PREPARATION: oil, grease, etc. Further reference is made to the painting specification.
PRECEDING None.
COAT:
REMARKS:
Spreading rate: Figures quoted in this data sheet are theoretical. The practical (actual) spreading rate of the
product varies with the method of application, skills of applicator, shape and texture of the
substrate to be painted, film thickness applied and working conditions.
Note: HEMPEL’S ACRYLIC PRIMER/SEALER 26630 is for professional use only.