Sunteți pe pagina 1din 1

Antennas for Concealment Configurations

Slant +/- 45° Dual Polarized, Panel 60°/ 15.5 dBi

BXA-185060/4 ___ FP
Mechanical specifications
When ordering, replace “___” with connector type.
Length 639 mm 25.16 in
1)
Width 154 mm 6.06 in Radiation-pattern
Typical 3-antenna array using three
Depth 80 mm 3.15 in
BXA-185060/4 _ FP antennas
4) -100 -90 -80
Weight 2.27 kg 5.00 lbs -120
-110 -70
-60
-130 -50
Antenna consisting of aluminum alloy with brass feed- -140 -40
lines covered by a UV safe fiberglass radome. -150 -30

-160 -20

Mounting: -170 -10

Mounting bracket kit #26799997 included. 180 35 30 25 20 15 10 5 0

170 10
See notes (below, right) regarding minimum 160 20
diameters of mounting pipe and concealment 150 30
radome. 140 40
130 50
120 60

Equipment requirements 110


100 90 80
70

Due to limited space in concealed Horizontal


configurations, it is necessary to order 90°
elbow connectors for jumper cables. -110
-100 -90 -80
-70
-120 -60
-130 -50
-140 -40
-150 -30

Electrical specifications -160 -20

-170 -10
Frequency Range 1850-1990 MHz 180 35 30 25 20 15 10 5 0

Impedance 50Ω 170 10

3) 160 20
Connector NE, E-DIN 150 30
1)
VSWR ≤1.4:1 140
130 50
40

120 60
Polarization Slant ± 45° 110
100 90 80
70

1)
Isolation Between Ports < -30 dB Vertical
1)
Gain 15.5 dBi Radiation patterns for all antennas are
2) measured with the antenna mounted on a
Power Rating 250 W fiberglass pole.
1)
Half Power Angle
Mounting on a metal pole will
H-Plane 60° typically improve the Front-to-Back Ratio.

E-Plane 14°
1)
Electrical Downtilt 0° The BXA-185060/4 _ FP can be used in a 3-Antenna Array with the
1)
Null Fill 15% following specifications
Lightning Protection Direct Ground Outside Diameter of Mounting Pipe Inside Diameter of Concealment Radome
63.5 mm 2.5 in 419.1 mm 16.5 in
88.9 mm 3.5 in 444.5 mm 17.5 in

Patented Dipole Design: U.S. Patent No. 6,597,324 B2 101.6 mm 4.0 in 457.2 mm 18.0 in
1)
Typical Values
2)
Power Rating limited by connector only.
3)
NE indicates an elongated N Connector.
E-DIN indicates an elongated DIN Connector.
4)
The antenna weight listed above does not include the
bracket weight.
Improvements to mechanical and/or electrical performance of the
antenna may be made without notice.
1850-1990 MHz
1300 Capital Drive Rockford, IL 61109 Toll-Free (888) 417-9562 Tel. (815) 399-0001 Revision Date: 6/3/04
Fax. (815) 399-0156 Email: antel@antelinc.com www.antelinc.com

S-ar putea să vă placă și