Sunteți pe pagina 1din 1

Reactions Input Summary of Results

Load combination Maximum Bearing Stress 8.38 MPa < 15 Mpa Hence Safe
Actions
100 101 102 103 Maximum Tension in bolt 75.60 kN < 180.67 kN Hence Safe
M (kN-m) 54 250 150 175 Maximum Shear in bolt 11.34 kN < 115.9 kN Hence Safe
Fy (kN) 744 -244 25 10 Check for combined check and shear 0.18 < 1 Hence Safe
Fx (kN) 50 55 30 75 Anchor bolt pull out 537.14 mm
Fz (kN) 50 60 30 85

Column Dimensions
d(mm) tw(mm) bf(mm) tw(mm) Material Properties Steel Plate Bolt
492 8 350 16 Yield stress fy(N/sqmm) 350 250
Base Plate Ultimate stress fu(N/sqmm) 490 400
Length N 790 mm
Width B 250 mm Concrete Properties
Thickness tp 16 mm Grade of Concrete M25
Characteristic
Bolt Parameters compressive 2
25
fck(N/mm )
strength

Dia db 32 mm Bond stress tbd(N/mm 2) 1.4


No of Bolts 10 mm
Pitch p 130 mm γmb 1.25
Gauge g 130 mm γmo 1.1
Bolt C/C Lb 508 mm

Area of Base plate,A (BXN) 197500 mm 2


Section modules of Base plate ,Z (B*N 2/6) 26004166.67 mm 3

Maximum Bearing Pressure (0.6 fck) 15 N/mm 2

Calculation of Tension in Bolts


e<N/6 Base plate to be checked for compression case (No Tension)
e>N/6 Base plate to be checked for tension case (No Compression)
N/6 = 131.67 mm
C= N*Pmax/(Pmax+Pmin)
a= N/2-C/3
e1= (N-Lb)/2
y= N-C/3-e
T= M-(Pa)/y
No of bolts in Tension n t 5 no's
No of bolts in Shear n t 10 no's

Anchor Bolt Allowable Capacity as per chapter -10 of IS:800-2007 (LSD)


Vdb= 115.90 kN Vdb=Vnsb/ϒmb= (fu/SQRT(3) * (nn*Anb+ns*Asb)/γmb) Cl - 10.3.3 of IS:800-2007
Tdb = 180.67 kN Tdb = Tnb/ϒmb = (0.9 fub An < fyb Asb (γmb / γmo))/ϒmb Cl- 10.3.5 of IS:800-2007
Combined tension and Shear of anchot bolt as per cl-10.4.6 of IS:800-2007
(Vsf/ Vdf)2 + (Tf/ Tdf)2 < 1

Check anchor bolt for Pull out


L= Tf/(π xdb.)xtbd
Output Data
Load Data Bearing Pressure check Eccentricty check Tension in Bolts Forces per Bolt (kN) Capacity of Bolt in Combined
Moment Axial Shear Pmax Pmin e=M/P Tension Shear Tension Shear check of
LC Check Check C(mm) a(mm) y(mm) Tf (kN)
(M) (P) Shear P/A+M/Z P/A-M/Z (mm) Tf= T/nt Vsf = V/nv Tdb (kN) Vdb (kN) bolt
100 54.00 744.00 70.71 5.84 1.69 Pmax<0.6fck 72.58 No Tension 0.00 0.00 0.00 0.00 0.00 7.07 180.67 115.90 0.00
101 250.00 -244.00 81.39 8.38 10.85 Pmax<0.6fck 1024.59 No Comp 344.24 280.25 534.25 378.00 75.60 8.14 180.67 115.90 0.18
102 150.00 25.00 42.43 5.89 5.64 Pmax<0.6fck 6000.00 No Comp 403.67 260.44 514.44 137.34 27.47 4.24 180.67 115.90 0.02
103 175.00 10.00 113.36 6.78 6.68 Pmax<0.6fck 17500.00 No Comp 397.97 262.34 516.34 169.92 33.98 11.34 180.67 115.90 0.04

Thickness of plate Calculation for Tension


Maximum tension ,T 75.60 kN
Moment, M=Txg/8 1.23 kN-m
t = √(6 M γmo /1.2* fy*p) 12.186 mm

S-ar putea să vă placă și