Documente Academic
Documente Profesional
Documente Cultură
We print buildings
Technical specifications of construction 3D printer What is the output capacity of the printer 3D?
Building structure characteristics Performance of the 3D printer for 1 cubic meter of the building structure (a wall consisting of two
connected by a bridge sine wave (Pic 1), 150 mm thick.) - is 2 machine-hour, or 6,7 sq.m. of partitio
Construction economics
The same volume for structure 400 mm. thick with additional straight layer (Pic 2) is 1.13 machine
of wall in 68 minutes. In this case the output is constant and doesn’t vary from machine to machin
and it does not depend on the complexity and frequency of curves of the building structure.
Pic. 1
http://apis-cor.com/en/faq/texnicheskie-xarakteristiki-3d-printera/ 1/2
04/04/2018 Technical specifications of construction 3D printer | Apis Cor. We print buildings
Dimensions of the Apis Cor 3D printer in folded state: 4×1,6×1,5 m, weight - 2 tons.
http://apis-cor.com/en/faq/texnicheskie-xarakteristiki-3d-printera/ 2/2