Documente Academic
Documente Profesional
Documente Cultură
Plumbing/Roofing
®
)DVWDQG(I¿FLHQWLQVWDOODWLRQ
:UDSVDURXQGH[LVWLQJRUGLI¿FXOWWRDFFHVVSLSHV
2XUEDVHPDNHVHDV\ZRUN
$OXPLQLXPEDVHFRQIRUPVWRURRIZLWKHDVH
®
Environmentally friendly
Safe alternative when drinking water is important
Easy Installation
and slate roofs -XVW¿[LWDQGWDELWXQGHUWKHWLOH
! " " # $ % !
" $ # !
&
Easy to Work With
Evap Flashing
Easy to Install
Flashing your Evaporative
Cooler is now so much easier! For Tiled or Metal Roof
® 20 Year Warranty
www.deks.com.au
Easy to Work With
Selection Guide
Duct External Base Size
Roof Type mm inch mm inch Colour Deks Code
Metal 550 x 550 21½ x 21½ 854 x 723 33½ x 28½ Black DFE550B
Tile 550 x 550 21½ x 21½ 1040 x 1290 41 x 51 Slate Grey SDA550GB
Tile 550 x 550 21½ x 21½ 1040 x 1290 41 x 51 Tuscan Red SDA550REB
Tile 550 x 550 21½ x 21½ 1040 x 1290 41 x 51 Caulfield Green SDA550GRB
Product Information
DEKS new Evap Flashing makes flashing evaporative cooling units easier than ever before.
It gives metal droppers a water tight seal when penetrating through corrugated iron or tiled roofs.
The aluminium base of the tile roof version is available in 4 colours - Slate Grey, Tuscan Red,
Caulfield Green or Plain Aluminium. Plain Aluminium can be painted to suit your roof colour.
The corrugated iron version is available in black only.
Bend back approx Form aluminium base to Cut lower edge and Apply silicone to inner Screw fix EPDM
10mm of aluminium contour of tiles by hand tuck under tile to face of EPDM flashing flashing at locations
upper edge to prevent or using a DEKS sand secure against wind where it touches the marked on product
water leakage (tile hammer (tile version uplift (tile version only dropper box. using metal washers
version only). only - SDA). Apply - SDA). provided.
silicone under
aluminium edges and
screw fix at approx
25-40mm centre (metal
roof version only - DFE).
www.deks.com.au
Easy to Work With
Skylights
Dekstrip Kit
®
Flashes hi-rib & standing seam profiles
www.deks.com.au
Easy to Work With
Selection Guide
Deks Code Length Width
m feet mm inch
EXCLUSIVE
DS23-180 23 75‘ 180 7¨ ‘CONCERTINA’
DS23-235 23 75‘ 235 9¨ EDGES STRETCH
UP TO
DS23-305 75‘
23 305 12¨
25%
DS15-450 15 50‘ 450 18¨
DS10-180 10 32‘ 180 7¨
Sealant
DS10-235 10 32‘ 235 9¨ Because of the unique properties of TPE, Deks recommends
DS10-305 10 305 Butyl Mastic as a sealant in all applications.
32‘ 12¨
235
DS3-235 3.1 10‘ 9¨ Paint to Match Roof
Easy to fix
After installation, and preferably after a period of ‘weathering’,
®
Dekstrip can be painted with any good quality 100% acrylic
paint after priming with an epoxy resin-based primer.
Square Ducts, Chimney, Skylights
www.deks.com.au
Easy to Work With
Easy to Install
Light weight, easy to trim and fully self-adhesive
Self Adhesive and very Slower set Adhesive
workable lead Allows time for repositioning
Product Range
Rolls in three standard sizes, and colours Black, Grey
and Brick Red
Environmentally Friendly
Aluminium stretch netting cast in polymer rubber
Easy to Work With
)DVW)ODVKTXLFNZHDWKHUSURRIÀDVKLQJ
Fast Flash consists of aluminium stretch netting cast in environmentally friendly polymer rubber.Fast Flash is self-adhesive on the
reverse and protected by cover foil that is removed before installation. Fast Flash is available in rolls in three standard sizes
and comes in grey, black and brick red.
ttttt tttt tt
ttttt
ttttt
1ROHDFKLQJRIFKHPLFDORUFRORXULQJDJHQWV
)OH[LEOHURRIƃDVKLQJ
7KHIXWXUHLVOHDGIUHH 3HUIRUPLVWKHZHLJKWRIOHDG
!
)DVWDQGHDV\PRXQWLQJ
" # $ $ #
5DQJHRIUROOVDQGVKHHWVLQYDULRXVVL]HVDQGDYDLODEOHLQ*UH %
7HUUDFRWWDDQG%ODFN
XVW ƂW W DQG J W W J W X G
7
@ A
& ' ( ) * + , , -
) 2 + 3 4 5 6 7 8 2 0 9 : ; ) + , , < 3
< + >
& ' ( ) * + , , ( .
) 2 + 3 4 5 6 7 8 2 0 9 : ; )
& ' ( ) * + , , /
) 2 + 3 4 5 6 7 8 2 0 9 : ; ) < + > + , , < 3
& ' ( ) * ) , , -
0 2 ? 1 4 5 6 7 < 3 2 1 ? 9 : ;
& ' ( ) * ) , , /
& ' ( ) * ) 0 , -
) < =
) ) 0 ,
< + > < =
& ' ( ) * ) 0 , ( .
1 2 ) = 4 5 6 7 < ) 2 3 1 9 : ;
< =
& ' ( ) * ) 0 , /
1 , , 3 )
< + >
& ' ( ) * 1 , , ( .
= 2 1 0 4 5 6 7 < 8 2 < 1 9 : ; 1 , , 3 )
) < + > 1 , , 3 )
www.deks.com.au
Deks Couplings
Easy to Work With
Code Description Pipe Size Range mm Box QTY Colour Code Description Pipe Size Range mm Box QTY Colour
6001 32 DWV PVC 32-38 80 Black 6013 100 PVC 105 - 112 27 Black
6002 40 DWV PVC 38-46 48 Black 6015 100 EW 135 - 142 27 Black
6003 50 DWV PVC 50-61 90 Black 6014 100 EW PVC 135/142 - 105/112 12 Black
6003G 50 DWV PVC 50-61 90 Grey 6016 150 PVC 155 - 165 18 Black
6004 65 DWV PVC 63-72 36 Black 6018 150 EW 192 - 198 5 Black
6005 80 DWV PVC 76-85 36 Black 6017 150 EW PVC 192/198 - 155/165 5 Black
6006 100 DWV PVC 105-112 27 Black 6026DC 225 EW 277 - 284 1 Black
6006G 100 DWV PVC 105-112 27 Grey 6028DC 225 PVC 247 - 252 1 Black
6010 150 DWV PVC 155-165 18 Black 6027DC 225 EW PVC 277/284 - 247/252 1 Black
6010G 150 DWV PVC 155-165 18 Grey 6031DC 300 PVC 310 - 317 1 Black
6028 225 DWV PVC 247-252 1 Black 6032DC 300 EW PVC 365/371 - 310/317 1 Black
6031 300 DWV PVC 310-317 1 Black
6060 375mm storm water PVC 397-402 1 Black
6069 90mm storm water PVC 83-94
83-94
48 Black Caps
6069G 90mm storm water PVC 48 Grey
Bushes
AC-PVC / EW - PVC Couplings
Code Description Pipe Type
Code Description Pipe Size Range mm Box QTY Colour 6029 150 PVC - 100 PVC Bush PVC - PVC
6047 50 PVC - 40 Copper Bush PVC Copper
6007 100 EW PVC 135/142 - 105/114 27 Black
6038 50 PVC/Cast Iron - Copper Bush PVC/CI - Copper
6007G 100 EW PVC 135/142 - 105/114 27 Grey
6040 100 PVC/Cast Iron - Copper Bush PVC/CI - Copper
6011 150 EW PVC 195/198 - 155/165 12 Black 6041 150 PVC/Cast Iron - Copper Bush PVC/CI - Copper
6027 225 EW PVC 277/284 - 247/252 1 Black
6044 70 PVC/Cast Iron - 65 Copper Bush PVC/CI - Copper
6032 300 EW PVC 365/371 - 310/317 1 Black
6042 150 AC PVC 170/190 - 155/165 12 Black
6051 100 PVC AC/DI 105/114 - 115/124 10 Black Stainless Steel Worm Drive Clamps
Code Description Used for
H316028 25 - 45mm 32 PVC
Stops Noise
Stops Smells
Stops Suds
Stops Vermin
No more Waste
Quick and easy to install
Grate Problems!
Fits both 80 & 100mm grates
www.deks.com.au
Easy to Work With
2. Lift grate lid and insert Dekfit GrateMate so that it sits just below the top of the grate. Where there is an
internal grate, fit the Dekfit GrateMate below ther level of the grate.
3. Remove Dekfit GrateMate and check water mark on the poly pipe to ensure that at least 50mm of the
pipe is sitting in the water in the ‘S’ trap *.
* If no water mark is visable, the waste pipe is probably longer than usual and the longer poly pipe will be needed to improve sound reduction. Measure from
grate to below water level to determine length of pipe required. (20mm ID diam. pvc or poly pipe is available at plumbing and hardware stores).
† If the Dekfit GrateMate is sitting too high to allow the grate to be replaced properly, simply trim the poly pipe so that at least 50mm sits in the water in the ‘S’
trap.
Retrofitable in minutes
Applications Floor
Dekfit ™ GrateMate ™
Head Office
5/841 Mountain Hwy, Bayswater Vic 3153 • P.O. Box 569, Bayswater Vic 3153
Phone: 1800 882 098 or (03) 8727 8800 Fax: (03) 9720 1000
Email: info@deks.com.au Website: www.deks.com.au
Pan Adaptors(F).pdf 13/2/10 8:56:40 PM
Dekfit Pan ®
& pipes
Australian
Designed
Pan Adaptor
Connecting the Waste Pipe to the Pan
Our range of adaptors will suit just about any existing waste pipe - so renovations and
repairs are a breeze. See over for instructions on how to select the right adaptor to
suit your pan and pipe. All adaptors come with a stainless steel clip.
M
Brass pipes
Y
CM
PVC pipes
MY
CY Copper pipes
CMY
K Earthenware pipes
Connecting the
Pan Cone Cistern to the Pan
FS 520679
QUALITY ISO9001
www.deks.com.au
Pan Adapters(B).pdf 13/2/10 8:55:05 PM
Dekfit Pan ®
Pan Adaptor
Choosing the right Dekfit Pan Adaptor
®
Measure the outside diameter of the pan waste pipe at its widest end. Check the type
of pipe material. Choose from the list below (within a 5mm tolerance).
Existing Pipe OD Existing Pipe Material Part Number
75mm Copper PA310
80mm PVC PA320
100mm Copper PA410
110mm Cast Iron or PVC PA420
135mm Brass Bossed PA550
C
150mm Cast Iron Bossed PA610
M
180mm Earthenware Bossed PA710
Y
CM
MY
Steel clips are included with the Pan Adaptors and are also sold separately.
CY
CMY
Part Number Clip Diameter To Suit Pan Adaptor
K H316048 65-89mm S/S PA310
H316048 66-89mm S/S PA320
H316080 76-127mm S/S PA410
H316080 76-127mm S/S PA420
H316096 121-165mm S/S PA550
H316096 129-178mm S/S PA610
H316136 178-228mm S/S PA710
Pan Cone
Choosing the right Dekfit Pan Cone
®
Pipe diameters are a standard of 40 or 50mm. After measuring the size of the pipe
from your cistern select the correct part number.
Existing Pipe OD Existing Pipe Material Part Number
40mm PVC 40990
50mm PVC 41010
For installation advice and selection guides for other products in the Dekfit range, call +61 3 8727 8800
®
www.deks.com.au
Easy to Work With
Compound
repairs, concrete, metal and steel
www.deks.com.au
Civil / Underground
Civil / Underground
Gibaults
Lids & Covers
Boxes & Surrounds
Repair Clamps
Grates
Cast Iron Fittings
Easy to Work With
For use with 2009 Silt Trap 4009 Cast Iron Stop Box 225 x 150
Product Product
Code Description Code Description
4010 CI Fire Plug Cover & Lid (VIC) 4037 Recycled Hydrant Cover NSW Grey
4018 CI Fire Plug Cover & Lid (QLD) 4069 Recycled Hydrant Cover NSW Yellow
4061L CI Hydrant, Lid only (No Body) Available
Colours
4012 CI Valve Cover & Lid, Melbourne Recycled Plastic Block for
4073 CI Valve Cover & Lid, Queensland 4045
Lamp Hole Cover
4012L CI Sluice Valve Cover, Lid Only, Drop in
4043 Fire Plug Lug 4058 Gas Cover Plastic Yellow with CI Gas Lid
Product Product
Description Description
Code Code
4002 199 Heavy Cast Iron Cover Square J21075 15 x 75mm Stainless Steel Half Clamp
4003 199 Cast Lid Only J21150 15 x 150mm Stainless Steel Half Clamp
4048 199 Recycled Plastic surround with lid J26075 20 x 75mm Stainless Steel Half Clamp
4004 200 Heavy Cast Iron Cover Square J33075 25 x 75mm Stainless Steel Half Clamp
4005 200 Cast Iron Cover Lid Only J33150 25 x 150mm Stainless Steel Half Clamp
3020 Long Lifting Handle - Heavy Duty J73075 65 x 75mm Stainless Steel Half Clamp
Gibaults
All Gibaults have cast iron bodies and end rings and are assembled with 3 galvanised bolts and supplied with 2 sealing
rings. Sealing rings manufactured to AS681-1. Cast Iron meets requirements of AS1830.
Gibaults are supplied assembled as shown.
Product Product
Description Description
Code Code
5001 100 STD - STD Gibault 5019 100 STD Blank Gibault
5002 150 STD - STD Gibault 5020 150 STD Blank Gibault
5004 100 PVC - PVC Gibault 5026 150 STD - COP Gibault
5005 150 STD - PVC Gibault 5030 100 STD - O/SIZE Gibault
5006 150 PVC - PVC Gibault 5080 100 STD - 80 STD Gibault
5015 100 STD - STD Long Gibault 5123 80 STD - STD Gibault
5016 150 STD - STD Long Gibault 5127 150 STD - O/SIZE Gibault
Technical drawings on all Deks Civil products are Load classification of selected Deks covers.
available on request (5001 pictured) AS 3996 Access Covers and Grates
Deks Code Description Class
4002 199 Heavy Cast Iron cover square C
4004 200 Heavy Cast Iron cover square B
4009 Cast Iron stop box 225mm x 150mm A
4010 Cast Iron fire plug cover & lid D
4012 Cast Iron valve & lid, Melbourne D
4016 Cast Iron stop box 450mm x 300mm A
4036 Round water box 100mm C
4038 Sluice Valve Cover Plastic B
4037 Recycled hydrant cover, NSW C
4048 199 recycled plastic surround with lid B
4049 Sluice Valve cover plastic B
4062 Recycled hydrant cover & CI lid B
Brisbane
Launceston
®
IAPMO PS 64 - 2007a BSI ISO 9001:2008 WSAA PA12/04
Watermark 21557
0RXQWDLQ+Z\%D\VZDWHU9LF32%R[%D\VZDWHU9LF
3KRQHRU)D[
(PDLOLQIR#GHNVFRPDX:HEVLWHZZZGHNVFRPDX
Electrical
Electrical
Dektites
(Refer to Plumbing / Roofing section for more information)
Extra Cables
UP Multicable to allow easy antenna installation
C
Environmentally Friendly
Aluminium stretch netting cast in polymer rubber
www.deks.com.au
A Skellerup Industries Company
Installation Instruction
STEP - 1 STEP - 2 STEP - 3 STEP - 4 STEP - 5
Cut the Dektite Pass the pipe Lift the tile above Make sure the tile is Remove the
DF10ABB cone and/or cable the penetration (if free from any dirt or protective plastic
and/or cable inlets through the necessary) to dust. Press base film from the base
to relevant size Dektite® allow the base to into the contour of sheet and replace
using snips. lay flat on the tile. the roof to stick the the tile.
flashing
permanently after 10
minutes curing time.
Sharp tin snips or scissors must be used to ensure a neat, parallel cut at the desired position on the
nipple. Do not use any sharp instruments, or any other tool including craft knives to puncture a hole.
www.deks.com.au
HVAC & R
HVAC & R
Pipe Insulation
Roof Flashings
HVAC Accessories
Washers
Washers
Solar
Pipe Insulation
Multi Cable
Multipurpose Flashing
Solar
Easy to Work With
Pipe External Base Size Base Deks Code Cable External Base Size Base Deks Code
mm inch mm inch Type Black EPDM P mm inch mm inch Type Black EPDM
0 - 35 0 - 1½˝ 490 x 410 16 x 19˝ Nu-Lead DNL100B 0-8 x10 0 - ¼˝ x 10 490 x 410 19 x 16˝ Nu-Lead DNLS10MB
0 - 35 0 - 1½˝ 500 x 600 20 x 24˝ Aluminium SDA MINI 0-8 x10 0 - ¼˝ x 10 500 x 600 20 x 24˝ Aluminium SDA 10MB
Deks Dis tribution, Wes t E nd Trading E s tate, B lackfriars R oad, Nails ea, B ris tol B S 48 4DJ
Tel: 01275 858866 Fax: 01275 855887 s ales @deks .org.uk www.dektite.co.uk
© 2006 DE K S Indus tries P ty Ltd A S kellerup Indus tries C ompany
® Dektite and DE K S are regis tered trademarks of DE K S Indus tries P ty Ltd
SolarFlashing
Solar Flashingfor
formetal
metalroofs
roofs
Dektite® Premium
Perfect for Flashing Pipes and Cables on Metal Roofs
The multi-application flashing in a highly durable EPDM or silicone, edged with a flexible aluminum band, flashes
pipes and cables on metal roofs. The square base fits most roof profiles.
Dektite® Premium DFE101BM
High UV resistance
Fit the acrylic lead or Aluminum apron in the same way as a conventional
lead sheet. The area where the tiles have been cut or moved should be
completely covered. It will normally be inserted under the tiles above the
penetration and dressed over the adjoining tiles as shown right.
Cables should be passed through the flashing as follows:
1. Check exact outside diameter of the cables.
2. Cut the nipples as indicated for 4-6mm or 6-8mm cables. Use tin snips or
scissors ensuring that the cut is straight and parrallel to give a tight fit to
the cable. DO NOT pierce the cable nipple with a craft knife or other
pointed implement.
3. Pass cables through using water as a lubricant if needed.
Universal Solution
Dektite Flashing Adhesive is a one part neutral cure (no acid) engineering grade Silicone
Adhesive with primerless adhesive to most substrates and is formulated to adhere Dektite
Silicone Flashings to these substrates including Tiles and Slate. The adhesive reacts with
atmospheric moisture to produce a long life silicone rubber joint that is resistant to UV and will
remain permanently flexible and withstands temperatures from -50°C to +165°C