Documente Academic
Documente Profesional
Documente Cultură
The unit is compact and easy to install. Each spray pole quickly clamps to any of the
Flexco Secondary Belt Cleaners P-Type®, R-Type®, U-Type®, and MHS.
An optional Water Control Manifold is also available to maintain the correct spray
pressure and water flow. It is complete with a strainer to minimize clogging of the
nozzles, a pressure regulator that can be set to the recommended water pressure,
a solenoid and bypass for maintenance, and a pressure gauge to visually check the
pressure during routine inspections— all mounted on a stainless steel backing plate.
Spray Pole Control Panel
Other Key Features and Benefits
• The spray nozzles are angled at 45° to the belt to create a chiseling effect
on the carryback without blasting the material from the belt.
• Provides superior cleaning power without the need to overtension the
cleaner blades, reducing the potential for premature blade wear.
• Helps suppress dust when cleaning off dry materials.
• Most of the residual water is removed by the secondary
cleaner, leaving the belt clean and dry.
• Minimal maintenance is required. All that is needed is a periodic
check of the water pressure and an occasional cleaning of the strainer.
Spray Pole Spray nozzles can be easily removed for cleaning if necessary.
• Available in sizes for belt widths from 450-3000 mm.
www.flexco.com
www.flexco.com
water spray pole system
Specifications
• Stainless steel pole with stainless
Belt
steel clamping brackets
• Spray nozzles are spaced typically
at 300 mm centers
• Delivers 3.9 liters per minute
at 300 kPa per nozzle
• Generally will affect moisture content Overlapping Spray Pattern
of material by less than .5%
• Typical pressure setting is 300 to 400 kPa
Spray Nozzles 1 2 3 3 3 4 5 5 5 6
Authorised Distributor:
Flexco (Aust.) Pty. Ltd • 18-20 Brookhollow Ave. • Baulkham Hills NSW 2153 Australia
Tel: 612-9680-3322 • Fax: 612-9899-1237 • New Zealand: Tel: 021-762-285 • 021-908-019
E-mail: sales@flexco.com.au • Web: www.flexco.com