Documente Academic
Documente Profesional
Documente Cultură
419
Support changes:
[MediaTek tab]
ADD: Meizu SLA Auth support
Meizu Mediatek Devices will work just like other Mediatek Devices in
general(requires internet connection)
ADD: Automated [Coolpad] Exit Factory Mode on firehose flashing procedure
[Qualcomm tab]
ADD: Support for Official LGE TOT Firmware extraction
ADD: Automated General CDT handling for Other Qualcomm devices(Lenovo) on firehose
flashing procedure
BUGFIX: Oppo Qualcomm OFP extraction bug fixed
BUGFIX: Revised DA handling for MT6750,MT6755(Helio P10),MT6757(Helio
P20),MT6795(Helio X10),MT6797(Helio X20)
BUGFIX: Revised [Oppo] Exit Fastboot Mode, now it should works on any known
firmware variants
--------------------------------------------------------------
ADD: Auto listing brand from "Android ToolBox" firmware directory on Factory Image
tab
ADD: Custom Ext_CSD preset
You may create your own custom EXT_CSD preset file, see example.txt in
\UFI\emmc\def\Config
BUGFIX: Minor bugfixes and improvements
Android ToolBox changes:
[MediaTek tab]
ADD: Storage type selection
ADD: Bypass security moved to Special Task
[Qualcomm tab]
ADD: UFS provisioning support for Qualcomm based devices
New "blank" UFS memory should be configured so the flashing procedure can be
done.
Provisioning task will configure new UFS chip according to device partitions
layout.
Provisioning UFS is a irrecoverable ONE time operation so make dure to select
correct "xml provisioning file" based on UFS manufacturer
ADD: "Show All Partition" option
ADD: Partial flashing support from userarea binary
ADD: Full erase before flash option
ADD: Firmware and partitions validation when loading rawprogram xml
ADD: Automated [Oppo] Exit Fastboot Mode on firehose flashing procedure
ADD: Support for Official Oppo firmware package (*.ofp)
ADD: .tar.bz2 firmware handling to support official Oppo firmware package
BUGFIX: [Oppo] Exit Fastboot Mode revised, now it should works on any known
firmware variants
BUGFIX: Official Oppo firmware package (*.ofp) for Qualcomm Devices
BUGFIX: Fixed DA handling for MT6750,MT6755(Helio P10),MT6757(Helio
P20),MT6795(Helio X10),MT6797(Helio X20)
Vivo MT67xx Devices now supported
BUGFIX: Minor bugfixes and improvements
--------------------------------------------------------------
--------------------------------------------------------------
UFI Software version 1.2.0.399
--------------------------------------------------------------
--------------------------------------------------------------
--------------------------------------------------------------
--------------------------------------------------------------
--------------------------------------------------------------
UFI Software version 1.2.0.341
ADD: Automated reset partition config and boot bus with factory erase on Factory
reset for moviNAND
ADD: eMMC product name definition updated
ADD: eMMC TP pinout definition updated
ADD: FFU files for KMNJS000ZM-B205(3), KMVYL000LM-B503(37), KMVZL000LM-B900(26)
ADD: [User Partition] Reading eMMC User partitions for Qualcomm devices will also
generate rawprogram0.xml
The generated dump may be used for Qualcomm debrick function with Android
ToolBox, -
but you have to spesify the required loader (Sahara or Firehose) files
BUGFIX: Partition scaning and Resize User Data bugfixes for some devices (Xperia)
BUGFIX: [Factory Image] Writing Qualcomm files may result in invalid MBR
generation
#ProudToBeUfiBoxUser
--------------------------------------------------------------
UFI Software version 1.2.0.337
NOTE that most of Android ToolBox function will use adb, and it might fail when
there are softwares that will connect to adb also.
SO, please close any other software that using adb when you're using Android
ToolBox.
--------------------------------------------------------------
UFI Software version 1.2.0.335
FlashTool
FASTBOOT
- Universal Android Fastboot flash client
- Brand and Model based firmware definition
- Support for Official ASUS .raw and .zip files
- Backup and Restore Android user data, apk files for before and after flashing
- Factory reset(erase cache and data ) for Android devices
- "Factory erase before flash" to clean-up user data
- "Erase all partitions(blankphone)", this will erase all userdata partition
including factory and config, imei and calibration data will be permanently
deleted.
this should only be used for "empty board", for example after you replace the eMMC.
- Included Root script for ASUS Intel devices('#' icon), based on:
http://forum.xda-developers.com/android/development/intel-android-devices-root-
temp-cwm-t2975096
there are 4 fastboot oem triggers available. For newer device usually "T4" will
work, but for A400CG please select "T2".
INTEL
- Intel SoC Platform Flasher for bricked devices
Supported platform: Moorestown, Medfield, Merrifield, Moorefield, CloverView and
CloverViewPlus
- Pre-packaged debrick file(UFI-ASUS_intel_debrick_package.zip) available for the
following devices:
ASUS_T00F(A500CG), ASUS_T00J(A501CG)
ASUS_T00G(A600CG), ASUS_Z002(A601CG)
ASUS_T00I(A400CG)
ASUS_T00K(A502CG)
ASUS_T00Q(A450CG)
ASUS_Z007(ZC451CG)
ASUS_Z008(ZE550ML)
ASUS_Z00A(ZE551ML)
K00Z(ME175CG)
K012(FE170CG)
ImeiTool
currently implemented:
- Imei repair for Intel SoC platform, specially for ASUS Intel devices.
- Generic Imei repair for Qualcomm.
WARNING: IMEI changing is illegal in most countries. Only use this function to
restore the original IMEI !!!
AdbTool
- Dump all the eMMC partitions
extcsd, boot1, boot2, gp part and userarea partition
- Read and write single partition for example factory, config, modemst1, modemst2,
etc
WARNING: dump result might be corrupted due to limitation of adb server and client
in the windows environment, to resolve this please insert microSd into the device
and use the "Dump to microSD" checkbox
- Screencap to capture the device screen, might be useful for documentation or
repair phone with faulty lcd
- Clear or Disable PERM_WRITE_PROTECT bit in the csd field, to fix or avoid "cannot
be wipe" problem
- DragAndDrop handler for adb sideload
- DragAndDrop handler for apk install
--------------------------------------------------------------
UFI Software version 1.2.0.327