Documente Academic
Documente Profesional
Documente Cultură
configUpload
Uploads system configuration data to a file.
Synopsis configupload
configupload [-all] [-p ftp | -ftp] [”host”,”user”,”path”,[”passwd”]]
configupload [-all] [-p scp| -scp] [”host”,”user”,”path”]
configupload [-all] [-force] [-local | USB |-U] [“file”]
configupload [-fid FID | -chassis | -all ] [-p ftp | -ftp] [”host”,”user”,”path”,[”passwd”]]
configupload [-fid FID | -chassis | -all ] [-p scp| -scp] [”host”,”user”,”path”]
configupload [-fid FID | -chassis | -all ] [-force] [-local | USB |-U] [“file”]
whitespace {“ ” | t”}
component {“a” - “z” | “A” - “Z” | “0” - “9” | “_” | “-”}
value {<any character not including n”>}
Elements enclosed in braces ( {...} ) indicate zero or more occurrences of the enclosed elements.
The switch configuration file includes the following sections:
[Configuration upload Information]
Contains configuration format version, switch firmware version, time stamp,
and number of logical switches. This section is the same in the chassis
configuration file.
[Switch Configuration Begin]
Displays switch name and Fabric ID.
[Boot Parameters]
Contains the switch boot parameters that define the switch identity. This
section includes the switch name and IP addresses. The configUpload
command supports DNS names, IPv4, and IPv6 addresses.
[Configuration] Contains general switch configuration variables, such as diagnostic settings
and other switch-specific settings
[Zoning] Contains the zoning configuration.
[Defined Security policies]
Contains the Defined Security Policies for the switch.
[Active Security policies]
Contains the Active Security Policies for the switch.
[iSCSI] Contains iSCSI-related configuration parameters.
[cryptoDev] Contains configuration settings for encryption.
[FICU Saved Files] Contains the FICON CUP-related configuration parameters.
[Banner] Contains banner header information.
The chassis configuration file contains the following sections:
[Configuration upload Information]
Displays configuration format version, switch firmware version, time stamp,
and number of logical switches. This section is the same in the switch
configuration file.
[fcRouting] Contains the Fibre Channel Router configuration.
[chassis configuration]
Contains configuration parameters relating to passwords, SNMP, ipFilter
settings and other parameters.
[LicensesDB] Contains license keys for the chassis. License keys should not be moved or
edited.
[DMM_WWN] Contains Data Migration Manager World Wide Names.
[Licenses] Contains license keys.
For Admin Domains (AD), refer to the Fabric OS Administrator's Guide for details regarding
configuration upload and download behavior.
Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Do not manually edit a configuration file after uploading the file and before downloading the file to
a switch. Manual editing bypasses sanity checks for some configuration parameters and results in
unpredictable system behavior
Examples To upload the switch configuration interactively from a switch that is not enabled for Virtual Fabrics:
switch:admin> configupload
Protocol (scp, ftp, local) [ftp]:
Server Name or IP Address [host]: 192.168.38.245
User Name [user]: jdoe
File Name [config.txt]:
Password:
To upload the switch configuration that belongs to a logical switch with FID 100:
switch:admin> configupload
Protocol (scp, ftp, local) [ftp]:
Server Name or IP Address [host]: 10.32.220.100
User Name [user]: jdoe
File Name [config.txt]: config.fid100.txt
Section (all|chassis|FID# [all]): 100
Password:
To upload a chassis configuration to a local file from the command line forcing an overwrite:
switch:admin> configupload -chassis -local -force config.txt
To upload the configuration file for a logical switch with FID 8 to an attached USB device:
switch:admin> configupload -fid 8 -ftp -USB config.txt
Diagnostics The configuration upload might fail for one or more of the following reasons:
• The host name is not known to the switch.
• The host IP address cannot be contacted.
• The user does not have permission on the host.
• The FTP server is not running on the host.