Documente Academic
Documente Profesional
Documente Cultură
TEST AND INSPECTION PER: Purchase Order requirement & Specifications As Noted Below
0020 X Material Test Certificates As applicable code & standard for raw materials
0030 X Welding Procedure Specification (WPS) and Procedure Approved WPS as applicable. Verify if approval is required as
Qualification Records (PQR) per SAEP-352
0040 X NDT Personnel and Procedure Verify valid personnel qualification and manufacturer approved
procedure
0020
0010
***
X X
In process inspection & test requirement
PMI/Ferrite test (As applicable)
Specification Details / Notes:
Per SAES-A-206
0030 X X Tensile, Impact test, Hardness, flattening and Guided bend test Per PO requirement or applicable Code
0050 X X Nondestructive testing (MT, PT, UT, RT) (As applicable) Per applicable code
0030
0010
***
X X
Final inspection & test requirements
Visual and dimensional test
Specification Details / Notes:
Per approved drawing & fabrication tolerance
0020 X X Hydrostatic test or under water pressure test (as applicable) Per applicable code. For stainless steel, the water shall not
exceed 50 ppm chlorides.
IR010000 Continued...
INSPECTION & TESTING REQUIREMENTS REVISION: 11/17/2013 CODE NUMBER: PAGE:
SAUDI ARAMCO FORM-175 REPLACES: IR010000 2 of 2
(1) VISUAL INSPECTION WITNESSING BY INSPECTOR (Note 1)
(2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR
(3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER
0030 X X Pickling & Passivation (If required) Per PO requirement / Per applicable standard
0050 X Marking, Handling and preparation for shipment Per applicable Code
0040
0010
*** Additional/Supplemental Requirements
If any per PO
Specification Details / Notes:
Notes :
(1) May only be waived by the responsible Saudi Aramco, ASC, or AOC Inspection Offices.
(2) See form IR000003 for instructions on using this form.
End of IR010000