Documente Academic
Documente Profesional
Documente Cultură
[1]. Gur, Y. and Wagner, D. (2017). Damping properties and NVH modal analysis results of
carbon fiber composite vehicle.
[4]. Jin, T. , Hong, K. & Ran, M. (2010). Preparation and Properties Of Fumed Silica/Kevlar
Composite Fabrics For Aplication of Stab Resistant Material.
[5]. KHAFIDH, M., SCHIPPER, D. J., MASEN, M. A., VLEUGELS, N., DIERKES, W. K.,
& NOORDERMEER, J. W. M. (2019). Validity of Amontons’ law for run-in short-cut
aramid fiber reinforced elastomers: The effect of epoxy coated fibers.
[6]. Chul, S., Seok, J. K., & Jin, H. Y. (2011). Experimental and Numerical Investigations of
Mode I Delamination Behaviors of Woven Fabric Composites with Carbon, Kevlar and
Their Hybrid Fibers.
[7]. Chul, S., Seok, J. K., & Jin, H. Y. (2016). A study on comparisons of composite and
conventional steel bogie frames.
[8]. Liu, L. , Dean, H., You, M. Z., & Xu, H. (2018). Experimental research on the
mechanism of non-monotonic characteristic between curing temperature and
mechanical behaviors of Kevlar/epoxy composite.
[9]. Young, M. L. and Gyun, T. C. (2015). Research Trends in Polymer Materials for Use in
Lightweight Vehicles.
[15]. Shcheglov, B.A. and Safonov, A.A., (2015). Teoreticheskie osnovy i prikladnye zadachi
tekhnologii kompozitov(Theoretical Foundations and Applied Problems of Composite
Technologies),
[16]. Safonov, A.A., (2010). Mathematical modeling for impregnation of reinforcing filler of
fiberglasses during vacuum infusion.