Documente Academic
Documente Profesional
Documente Cultură
RATES OF LABOUR
Sch. Sch.
Item Description Unit Rate Actual 5% 10% Sl. No. Item
No. No.
8 Bullocks pair with driver (with bandy) Day 787.00 787.00 826.35 865.70 2 b
8A Bullocks single with driver (with bandy) Day 566.00 566.00 594.30 622.60 2
20 Fitter (Pipe Laying / Bar bending) I Class Day 566.00 566.00 594.30 622.60 4
20A Fitter (Pipe Laying / Bar bending) II Class Day 549.00 549.00 576.45 603.90 9 a
26 Head Mazdoor for Well Sinking Day 422.00 422.00 443.10 464.20 15 a
36 Maistry, Road Inspector & Work Inspector Day 484.00 484.00 508.20 532.40 15 b
37A Mason for Brick Work - II Class Day 609.00 609.00 639.45 669.90 17 b
38 Mason for Stone Work - I Class Day 652.00 652.00 684.60 717.20 12
38A Mason for Stone Work - II Class Day 609.00 609.00 639.45 669.90 18 a
44A Painter / Varnisher - II Class Day 505.00 505.00 530.25 555.50 23A
55 Sprayer Mazdoor (for bitumen, tar etc.,) Day 398.00 398.00 417.90 437.80 33 24
68 Well Diver for removing silt-I Class Day 501.00 501.00 526.05 551.10 50 35
68A Well Diver for removing silt-II Class Day 483.00 483.00 507.15 531.30 51 36
76A Technical Assistant-Grade-I (B.E. Passed) Day 837.00 837.00 878.85 920.70 57 42
Technical Assistant-Grade-II
76B (Diploma in Engineering Passed / B.E. Failed / Day 754.00 754.00 791.70 829.40 58 43 a
Degree in Geology for Ground water works)
Technical Assistant-Grade-III
76C (Diploma in Engineering Failed / Day 638.00 638.00 669.90 701.80 59 44 a
I.T.I (civil) Passed
76D Cinema Operator (I.T.I. Passed) Day 526.00 526.00 552.30 578.60 60 b
Laboratory Assistant-Grade-I
77A Day 638.00 638.00 669.90 701.80 62 45 a
(Post Graduate in Science)
Laboratory Assistant-Grade-II
77B (Degree in Science / Day 584.00 584.00 613.20 642.40 63 b
Degree in Geology for Ground water)
Laboratory Assistant-Grade-III
77C Day 526.00 526.00 552.30 578.60 64 c
(With Degree Qualifiacation to work as works clerk)
78A Mazdoor employed for Geological maping Day 426.00 426.00 447.30 468.60 65 d
78D Head Mazdoor to Supervise exploratory works Day 450.00 450.00 472.50 495.00 68 g(i)
79 Mixer Operator (including concrete mixer) Day 463.00 463.00 486.15 509.30 69 g(ii)
Computer Operator-Grade-I
89A [B.E. (Computer Science) / Day 837.00 837.00 878.85 920.70 72 c
M.Sc., (Computer Science)]
Computer Operator-Grade-II
89B [B.Sc. (Computer Science) / Day 754.00 754.00 791.70 829.40 73 d
Diploma in Computer Science]
100 Wireman Grade-I / Electrician Grade-I Day 568.00 568.00 596.40 624.80 81 vii
101 Wireman Grade-II / Electrician Grade-II Day 537.00 537.00 563.85 590.70 82 viii
Sl.
Name of Material Unit Rate ii
No.
1 Water proofing compound Kg 41.50 iii
iv
b ii
96 58A
97 58B
c Sinthetic Grey, Paradise and Similar varieties. sq.m. 1420.00 114 75 (I)
76
126 ii
151 c
152 d
153 e
154 90.2
53 C.I. Brackets for A.C. pipe 100mm dia Each 19.50
155 91
156 92
157 93
158 111
58 G.I. "J" or "L" Bolts with nuts 6mm Dia Each 3.80
161 113 b
59 Steel - special extruded sections for steel windows Kg 60.90
and ventilators conforming to I.S.S. 7452 / 1990
including Fabrication charges 162 114
73 Bolts and Nuts 10mm dia for false ceiling Each 5.50 37
85 Teakwood beading
a 15mm x 12mm RM 15.00
93 Solid core Flush shutters with Teak ply on both side sq.m. 2190.00
with teak wook lipping alround 35 mm thick
94 Solid core Flush shutters with Teak ply on one side sq.m. 1925.00
and commercial ply on other side with teak wook
lipping alround 35 mm thick
97a FRP door Sutter with FRP door frames made out of sq.m. 3880.00
FRP Sheets of 3mm thick of over all size 65mm x
50mm with rebate suitably reinforced using MS
Angle / Flats, cost of holdfasts and solid core FRP
shutter Panel of 5mm thick and hollow core frames
of 3m wall thickness for styles and rails etc., of
sizes specified by Engineers.
98a PVC panelled door shutters hollow type - 200 mm x sq.m. 1995.00
20 mm panels with 1 mm wall thickness for panels
and styles and rails of suitable size with 2 mm wall
thickness suitably reinforced using MS Angle / Flat
including cost of necessary Aluminium hinges and
other furniture fittings.
b Excluding door frames sq.m. 1685.00
103 Barbed Wire - 10 Gauge - Two ply and four pronged 1 Kg or 60.30
(Galvanised) 6 RM
104 Chain link - 2" x 2" using 10 Gauge Galvanised Iron sq.m. 155.70
Wire (of all sizes)
105 Pin Headed / Fluted / Figured Glass 3mm thick sq.m. 220.00
106 Plain Glass - 4mm thick sq.m. 298.00
i 65 mm dia RM 242.00
ii 50 mm Dia RM 207.00
iv 32 mm Dia RM 149.90
v 25 mm Dia RM 126.80
vi 20 mm Dia RM 97.70
119 G.I.Specials
A Union
B G.I. Elbow
C G.I. Bend
D G.I. TEE
E G.I. COUPLING
F G.I. REDUCER
124 Brass chromium plateed pillar Tap (Heavy type)- Each 263.00
15/12mm Dia
125 Brass chromium plated shower Rose - 100mm Dia Each 189.00
138 Brass chromium plated soap tray of size 150mm x Each 160.30
100mm
139 Brass chromium plated towel rail 60cm long and Set 261.20
20mm dia with brackets
140 Anodised Aluminium Towel Rail 60cm long and Set 128.00
20mm dia with Brackets.
142 Stone ware gully trap of size 150mm x 100m with Each 165.50
cast Iron Double Gratings
A Plain Bend
C Plain TEE
i 150mm Dia Each 1068.00
G COWL
Note (1) For Rainwater down fall pipe works, only PVC
Pipe of working Pressure of 4 kg. per sq.cm. shall
be adopted.
B Elbow
C BEND
E End Cap
F Reducer
G Reducer Tee
H Reducer Elbow
I Jet Nipple
NEW ITEMS
A Elbow
B Door Elbow
C Tee
F Bend
G "Y"
L Reducer
M Shoe
N Vent Cowl
OTHER ITEMS :
203 PVC screw down tap heavy type 20 mm dia Each 79.40 79.40 75.70 75.70
204 PVC screw down tap heavy type 15 mm dia Each 61.40 61.40 58.50 58.50
206 PVC low level flushing tank with all internal fittings
- (wall mounting type)
I Elbow
II Tee
III UNION
IV REDUCER
a 50 mm x 40 mm Dia Each 51.10
V REDUCER ELBOW
VI REDUCER TEE
I Elbow
II Tee
III COUPLING
V NIPPLE
NEW ITEMS
170 Add for painting / tarring for Hex Nipple Each 2.75
168 Manhole Cover 60 x 60cm (heavy duty) with frame Each 1810.00
164 Special clamp, teak wood plugs and screws Set 21.00
165 PVC clamp, teak wood plugs and screws Set 8.30
158 Colour designed glazed tiles 300 x 200 x 6mm Each 28.30
171 Labour charges for fixing cuddapah slab to cup- sqm 44.70
board
175 Double charged Vertified tiles 600 x 600 x 8mm sq.m. 900.00
176 Double charged Vertified tiles 800 x 800 x 10mm sq.m. 1150.00
26 Skilled Mason Class - I for Heritage Work Day 920.00 920.00 966.00 1012.00
27 Skilled Mason Class - II for Heritage Work Day 805.00 805.00 845.25 885.50
30 Skilled Sthapati Brick Mason for Heritage Work Day 1150.00 1150.00 1207.50 1265.00
33 Skilled Sthapati Stone Mason for Heritage Work Day 1150.00 1150.00 1207.50 1265.00
209 Incinerator for Ladies Bathroom (For School Works) Each 33600.00
115 Supplying and fixing of PVC Sliding Door with Roller Sqm. 3000.00
201 Providing Cornice Work for Gyp Board False Ceiling RM 185.00
203 Termite Proof / Water Proof Plywood 19mm thick Sqm. 1300.00
(ii) Outgoing
a. Main Fire Pump
400 A TPN SDFU with HRC fuses with suitable HP
fully automatic starter / delta starter with over load
protection , digital ammeter with built- in selector
switch and suitable CTs, current sensing type single
phasing preventer complete with all accessories and
internal wiring required for automatic operaton,
selector switch for auto/ manual / OFF operation - 1
No......
b. Jockey Pump
125 A TPN SDFU with HRC fuses with suitable HP
fully automatic starter/ delta starter with over load
protection, current sensing type single phasing
preventer complete with all accessories and internal
wiring required for automatic opertion, selector
switch for auto / manual operation - 1 No.
c. Diesel Engine Control comprising of :
1. Auto / manual selector switch and 3 attempt
starting device, timers and relays as required, push
buttons, start / stop in manual mode.
2. Indication lamp for high/ low lubircant oil
pressure, high water termperature and engine ON
indication.
3. Battery charger suitable for 12V/ 24 V DC with
boost and tickle selector switch, 0-15V/0-30V DC
volt meter, 0-20A DC ammeter
4. All standard relays and accessories for automatic
operation of diesel engine.
5. The above combined panel mounted over MS
channel fabricated frame with cement concrete
platform, all other connection works carried out as
per standard methods and including conveying,
fixing and incidental charges, etc., complete as per
standard specifiction and as directed by the
Departmental Officers.
Motor Driven Fire Pumpset suitable for automatic
operation and consisting of following .
A. 1 No. horizontal split casing centrifugal type fire
pum capable of delivering 4550 LPM against a total
head of 110 metres, so as to ensure a miniimum
pressure of 3.5kg. per sq.cm at the fartherst top
most hydrant / outlet with pum pcasing of cast iron
to grad FG 200, IS 210-1978 and parts like
impeller, shaft sleeve, bearing ring etc., of non
corrosive metal either like brone, brass or gun
metal and shaftof stanless steel.
b. 1 No. suqirrel cage induction motor of 175 HO,,
415 Volt, 3 phase 50 Hz rating, conforming to IS
325-1978 with class "F" insulation, totally enclosed,
333 IP 55 for enclosure fan cooled type conforming to Each 825000.00
relevant protection clause of IS 4691, synchronous
speed of 2900 RPM.
c. Common bed plate fabricated with MS channel /
Cast iron type for assembling the pump and motro
flexible coupling between the pump and the motor
wiht coupling guard for protection - 1 No.
d. Making cement concrete foundation suitable for
the above pumpset including vibration isolation
pads as necessary, foundation bolts, brackets,
clamp fixtures, grouting etc., In accordance with
the manufacture's design and as per standard
methods and including conveying, fixing and
incidiental charges, etc., complete as per standard
specification and as directed by the Departmentaql
Supply, installation, testing and commissioning of
Diesel Engine Driven Main Fire Pump suitable for
automatic operation and consisting of following and
complete in all respects as required.
A. 1 No. horizontal split casing centrifugal type fire
pump capable of delivering 4550 LPM against a total
head of 110 metres, so as to ensure a minimum
pressure of 3.5kg. per sq.cm at the fartherst top
most hydrant / outlet with pump casing of cast iron
to grade FG 200, IS 210-1978 and parts like
impeller, shaft sleeve, bearing ring etc., on non -
corrosive metal either like bronze, brass or gun
334 Each 1240000.00
metal and shaft of stainless steel.
b. 190 HP, 1500 RPM water cooled with radiator,
diesel engine conforming to relevant BS & IS
standard complete.
c.Auto starting mechanism, 12 volts / 24 volts
eletric starting equipment like self motor, dynamo,
solenoid switches etc.
d. 110 litres capacity diesel tank mounted over
stand fabricated using 25mm x 25mm x 6mm size
MS angle providing with level indicator, inlet port,
outlet port, drain port and diesel return line port
and fuel pre-filter, after filter etc..............
e.Exhaust system having flexible metallic mufler,
100mm dia MS heavy pipe extended upto 1m
ouside pump house duly insulated with 50mm thick
glass wool wth 1mm thick aluminium sheet
cladding, residential silencer with necessary MS
support arrangements from wall or ceiling as per
site condition.
f. Dash board consisting the instruments like
Temperature Gauge, Galvano Type DC Ammeter,
Lubricant Oil Pressure Gauge, Ignition Switch,
Emergency stop and all other protection equipment
as per specification, stop soleneid for auto stop in
the event of fault wtih audio indications, painted
with Post Office Red Colour etc.,as required.
g. 12V /24V storage battery, maintenance free
tape, 180 AH rating, MS fabricated common base
plate, coupling guard, foundation bolts etc., as
required.
h. Postioning the diesel engine driven fire pump
over cement concrete foundation using suitable size
anti-vibration mounting arrangement.
All works including conveying , fixing and incidental
charges etc., complete as per standard specification
and as directed by the Departmental Officers.
Make: KIRLOSKAR ? EQUIVALENT.
Supplyu, installation testing and commissioning of
Diesel Engine Driven Main Fire Pump suitable for
automatic operation and consisting of followings
complete in all respects as required.
A. 1 No. horizontal split casing centrifugal type fire
pump capable of delivering 4550 LPM against a total
head of 110 metres, so as to ensure a minimum
pressure of 3.5kg. per sq.cm at the fartherst top
most hydrant / outlet with pump casing of cast iron
to grade FG 200, IS 210-1978 and parts like
impeller, shaft sleeve, bearing ring etc., on non -
corrosive metal either like bronze, brass or gun
335 Each 1145000.00
metal and shaft of stainless steel.
b. 100 BHP, 1500 RPM water cooled with radiator,
diesel engine conforming to relevant BS & IS
standard complete.
c.Auto starting mechanism, 12 volts / 24 volts
eletric starting equipment like self motor, dynamo,
solenoid switches etc.
d. 110 litres capacity diesel tank mounted over
stand fabricated using 25mm x 25mm x 6mm size
MS angle providing with level indicator, inlet port,
outlet port, drain port and diesel return line port
and fuel pre-filter, after filter etc..............
e.Exhaust system having flexible metallic mufler,
100mm dia MS heavy pipe extended upto 1m
ouside pump house duly insulated with 50mm thick
glass wool wth 1mm thick aluminium sheet
cladding, residential silencer with necessary MS
support arrangements from wall or ceiling as per
site condition.
f. Dash board consisting the instruments like
Temperature Gauge, Galvano Type DC Ammeter,
Lubricant Oil Pressure Gauge, Ignition Switch,
Emergency stop and all other protection equipment
as per specification, stop soleneid for auto stop in
the event of fault wtih audio indications, painted
with Post Office Red Colour etc.,as required.
g. 12V /24V storage battery, maintenance free
tape, 180 AH rating, MS fabricated common base
plate, coupling guard, foundation bolts etc., as
required.
h. Postioning the diesel engine driven fire pump
over cement concrete foundation using suitable size
anti-vibration mounting arrangement.
All works including conveying , fixing and incidental
charges etc., complete as per standard specification
and as directed by the Departmental Officers.
Make: KIRLOSKAR ? EQUIVALENT.
Supplym erection, testing and commissioning of
180 LPM, 70 metres, Head Pressurization Pump
with 10 HP electrical motor of Kirloskar make with
suitable base frame incluidng necessary vibration
336 Each 102000.00
bad mounting etc.,m including conveying, fixing and
incidental charges, etc., complete as per standard
specification and as directed by the Departmental
Officers. Make : KIRLOSKAR / EQUIVALENT.
New Items
364
UPVC Union 50mm dia Each 240.00
III d
IV Coupler
Drainage Composite
A.Geosynthetics - Geotextiles
B. Geosynthetics - Geomembranes
C.Geogrids
E.Drainage Composite
Supplying and laying of drainage composite for use
behind walls, between two different fills, alongside-
drains of road, below concrete lining of canals etc.
Gepcomposite for planar drainage, realized by
thermo bonding a draining core in extruded
monofilaments with two filtering nonwoven
Geotextiles that may also be working as separation
or protecting layers. The draining three dimensional
core will have a "W" confiquration as longitudinal
parallel channels. Minimum thickness to be 7.2mm,
with two filtering UV stabilized polypropylene
19 Sqm. 804.20
nonwoven Geotextiles of minimum thickness of
0.75mm characteristic opening size (0.90) of 110
micron and tensile strength of 8.0 kN/m that will be
working as separation or protecting layer,
Geocomposite having in plane flow capacity of 2.1
L/(m.s) at hydraulic gradient of 1.0 & 20 kPa
pressure and tensile strength of 18 kN/m with mass
per unit area of 740 gsm, supplied in the form of
roll for easy transportation to site work as per
detailed specification all complete as per directions
of Engineer-in-Charge
Supplying and laying of drainage composite for use
behind walls, between two different fills, alongside-
drains of road, below concrete lining of canals etc.
having thermo bonding a draining core - HDPE
geonet comprises of two sets of parallel overlayed
ribs integrally connected to have a rhomboidal
shape with a polyethylene film and a novwoven
Geotextiles having mass per unit area 130 gsm and
tensile strength of 8.0 kN/m that will be working as
20 Sqm. 951.35
separation or protecting layer, Geocomposite
having in plane flow capacity of 0.7L/(m.s) at
hydraulic gradient of 1.0 & 20 kPa pressure and
tensile strength of 13.5 kN/m, with mass per unit
area of 830 gsm, at easily accessible location
including top and bottom, with all leads and lifts,
materials, manpower and machinery, materials,
labour etc. complete and as directed by Engineer-
in-Charge
VI Gabion
B Panchavarnam Work
C Sudhai Work
D Wood Work
II RATES OF MATERIALS
Supply of high quality Burma Teak wood meant for
1
the purpose of making the following items
Temple Pattern Ornamental Doors with high quality
Burma Teak wood with 2" minimum to 7" maximum
thick Ornamental frames, 2" thick to 5" thick
a Kamala (Flower Planks), Creeper, Birds, Animal cum 309800.00
Figures, Sculptures, etc. Backside 1" thick to 3"
plank including necessary carving, shaping ,
wastage, etc., as per approved plan and design.
PART - A
c Post top lantern fitting with S.C. holder suitable for Each 2100.00
160W blended lamp / incandescent lamp
STARTERS FOR FLUORESCENT TUBES
Water tight bulk head fitting suitable for 100 / 60 Each 336.00
Watts lamp with guard heavy type (PHILIPS / BAJAJ
/ CROMPTON GREAVES)
Ceiling Rose Each 16.80
Fan clamp (dia 12mm) with 6mm MS side plates & Each 134.00
45 cm cross arm
CALL BELLS
PART "B"
EXHAUST FANS
a A.C Exhaust Fan 225mm (9") sweep (Light duty) Each 1240.00
b A.C Exhaust Fan 300mm (12") sweep (Light duty) Each 1420.00
c A.C Exhaust Fan 375mm (15") sweep (Light duty) Each 1460.00
d A.C Exhaust Fan 450mm (18") sweep (Light duty) Each 2060.00
e A.C Exhaust Fan 375mm (15") sweep (Heavy duty) Each 2700.00
f A.C Exhaust Fan 450mm (18") sweep (Heavy duty) Each 3360.00
PART "C"
SWITCHES
a 100 Amps TPN Switch with HRC fuses sheet steel Each 6820.00
double break
b 125 Amps TPN Switch with HRC fuses sheet steel Each 7470.00
double break
c 200 Amps TPN Switch with HRC fuses sheet steel Each 9650.00
double break
d 315 Amps TPN Switch with HRC fuses sheet steel Each 13700.00
double break
e 400 Amps TPN Switch with HRC fuses sheet steel Each 17640.00
double break
f 16 Amps TPN Metal clad switch with rewirable fuse Each 1035.00
units.
g 32 Amps TPN Metal clad switch with rewirable fuse Each 1530.00
units.
h 63 Amps TPN Metal clad switch with rewirable fuse Each 3330.00
units.
i 100 Amps Metal clad switch with rewirable fuse Each 6550.00
units.
j 200 Amps metal clad switch with rewirable fuse Each 9940.00
units.
1 63A TPN switch disconnector fuse units interior only Each 2780.00
with HRC fuses Double break.
a 4 Way DB 16 Amps / Way with fuse & Neutral each Each 539.00
(250V)
b 6 Way DB 16 Amps / Way with fuse & Neutral each Each 733.00
(250V)
c 8 Way DB 16 Amps / Way with fuse & Neutral each Each 909.00
(250V)
a 4 Way TPDB 16A / Way with fuse & Neutral link Each 2125.00
b 6 Way TPDB 16A / Way with fuse & Neutral link Each 2910.00
c 8 Way TPDB 16A / Way with fuse & Neutral link Each 3520.00
d 4 Way TPDB 32A / Way with fuse & Neutral link Each 2690.00
e 6 Way TPDB 32A / Way with fuse & Neutral link Each 3590.00
f 8 Way TPDB 32A / Way with fuse & Neutral link Each 4540.00
g 4 Way TPDB 63A / Way with fuse & Neutral link Each 6280.00
h 6 Way TPDB 63A / Way with fuse & Neutral link Each 8080.00
d 100 Amps three phase 500V 4 pole Change over Each 6010.00
switch
e 200 Amps three phase 500V 4 pole Change over Each 11300.00
switch
PART "D"
a 5 Amps 3 pin & 2 pin combined flush type wall Each 28.20
socket only.
b 5 Amps / 15 Amps 3 pin flush type wall socket only. Each 63.50
PART "E"
CONDUCTOR
k Cable gland suitable for 31/2 core 120 sq.mm UG Each 125.90
cable
l Cable gland suitable for 31/2 core 150 sq.mm UG Each 165.70
cable
m Cable gland suitable for 31/2 core 185 sq.mm UG Each 196.00
cable
n Cable gland suitable for 31/2 core 240 sq.mm UG Each 196.00
cable
o Cable gland suitable for 31/2 core 300 sq.mm UG Each 234.00
cable
p Cable gland suitable for 31/2 core 400 sq.mm UG Each 334.00
cable
q Cable gland suitable for 31/2 core 500 sq.mm UG Each 389.00
cable
PART "F"
d M.S. Box complete with Lock & Key arrangements Each 336.00
with painting of size (300 x 200 x 100mm)
PART "G"
MS ANGLES
ALUMINIUM FLAT
COPPER FLAT
PART "H"
PART "I"
P.V.C COUPLES
P.V.C. TEES
PART "J"
Size
Aluminimum Copper
PART "L"
BRASS SCREWS
CONDUIT SADDLES
1 RCCB / ELCB
2 RCCB / ELCB
FOUR POLE
HRC - FUSES
Schedul
Description Unit Rate e Item
No.
Cement MT 5750.00
Steel MT 45000.00
Flat Tiles 14
Brick Jelly 17
Pressed Tiles 20
20 x 20 x 2cm 1000 Nos. 10920.00 22
Pan Tiles 24
Mosaic Chequered tile Grey colour size 25 x 25 x 2cm 1000 Nos. 14385.00
Rough stone for masonry works (Hard Granite) cu.m. 433.00 39A
Cut stone pillar of size 0.15 x 0.15 x 2.1m Each 160.00 42B
Ashlar arch stone fully dressed to size all faces cu.m. 4704.00 50A
Flooring stone SS Size (Not less than 10cm thick) cu.m. 344.00 50B
Stone slab for culvert (3 faces two line dressed) cu.m. 4998.00 61
Quartz metal 2
LIME 156F
Freshly Slaked & Screened Burnt Lime Stone cu.m. 937.00 156H
TW Scantlings (over 3m for joist and rafters) - Malabar cu.m. 116600.00 318
TW Scantlings (for Tie beams and principal rafters) -
cu.m. 114700.00 319
Malabar
TW Planks (30 - 45cm wide & 12mm Thick) cu.m. 114300.00 338
TW Planks (30 - 45cm wide & 12 - 25mm Thick) cu.m. 107000.00 339
TW Planks (15 - 30cm wide & 12mm Thick) cu.m. 99900.00 357
TW Scantling (15 - 30cm wide & 12-25mm Thick) cu.m. 95000.00 357A
TW Planks (15 - 30cm wide & 25- 40mm Thick) cu.m. 93100.00 357B
TW Planks (Upto 15cm wide & 12mm Thick) cu.m. 91300.00 357C
TW Planks (Upto 15cm wide & 12-25mm Thick) cu.m. 91300.00 357 D
TW Planks (Upto 15cm wide & 25-40mm Thick) cu.m. 86200.00 357 E
Casurina poles 7
Casurina poles 13cm - 15cm dia RM 33.00
Eucalyptus Poles
NEW ITEMS 50 C
Terrace bricks 6" x 3" x 1" for Heritage Works 1000 Nos. 9450.00 iii
Uprooting & removing large palmyrah / coconut stumps Each 105.00 105.00 110.25 115.50
Uprooting & removing small palmyrah / coconut stumps Each 75.40 75.40 79.17 82.94
Removing weeds in channel and drain sq.m. 1.40 1.40 1.47 1.54
Cleaning Juliflora jungle with uprooting sq.m. 5.90 5.90 6.20 6.49
Cleaning Juliflora jungle without uprooting sq.m. 4.50 4.50 4.73 4.95
B. Dismantling
Dismantling, clearing away and carefully stacking materials
useful for re-use for any thickness of walls
Brick / stone in clay walls under 3m high cu.m. 44.80 44.80 47.04 49.28
Mud / sun dried brick walls under 3m high cu.m. 30.00 30.00 31.50 33.00
Mud / sun dried brick walls, add for every additional 3m or part
cu.m. 8.60 8.60 9.03 9.46
there of over the initial height of 3m
Brick / stone masonry in lime mortar walls under 3m high cu.m. 137.00 137.00 143.85 150.70
Brick / stone masonry in Cement mortar walls under 3m high cu.m. 168.00 168.00 176.40 184.80
Flag stone in roof or floor including lifting sq.m. 24.00 24.00 25.20 26.40
Cut stone slab over culverts upto 3.3m height below G.L cu.m. 700.00 700.00 735.00 770.00
Cut stone slab over culverts over 3.3m height below G.L cu.m. 730.00 730.00 766.50 803.00
Removal of cut stone slabs & RCC cover slabs sq.m. 305.00 305.00 320.25 335.50
Refixing cut stone slab cu.m. 334.00 334.00 350.70 367.40
Pantile or Mangalore tiled roof without roof timbers sq.m. 11.90 11.90 12.50 13.09
Flat & pan tiles or Manglore tile over flat tiles, with out roof
sq.m. 16.60 16.60 17.43 18.26
timbers
AC sheet roofing without roof timbers sq.m. 10.60 10.60 11.13 11.66
Corrugated iron sheet roofing with pan tiles over, without roof
sq.m. 17.80 17.80 18.69 19.58
timbers
Old thatched roof, including tying materials into small bundles for
sq.m. 5.20 5.20 5.46 5.72
reuse.
Wrought & putup framed timbers in roofs / floors cu.m. 440.00 440.00 462.00 484.00
Dry stones apron or revetment, stacking within 40m lead cu.m. 78.00 78.00 81.90 85.80
Chipping of concrete & roughening the surface sq.m. 24.00 24.00 25.20 26.40
Pressed tiles & weathering course sq.m. 27.30 27.30 28.67 30.03
One course of pressed tile roof finish in Cement Mortar sq.m. 15.20 15.20 15.96 16.72
One course of terrace bricks roof finish in Cement mortar sq.m. 17.80 17.80 18.69 19.58
Two course of flat tiles roof finish in cement mortar sq.m. 17.80 17.80 18.69 19.58
Hard rock measured in solid including blasting & stacking cu.m. 517.00 517.00 542.85 568.70
Mediun rock and dense medium rock requiring blasting cu.m. 264.00 264.00 277.20 290.40
Extra for every additional 10m lead or part thereof over the
cu.m. 6.20 6.20 6.51 6.82
initial lead for blasted materials
Extra for every additional 1m lead or part thereof over the initial
cu.m. 6.40 6.40 6.72 7.04
lift of 2m for blasted materials
Benching, hard rock upto an average 10 cm depth sq.m. 500.00 500.00 525.00 550.00
Drilling holes in hard granite 40mm diameter RM 166.00 166.00 174.30 182.60
Drilling holes in hard granite 45mm diameter RM 194.00 194.00 203.70 213.40
Drilling holes in hard granite 50mm diameter RM 233.00 233.00 244.65 256.30
Drilling holes in hard granite 75mm diameter RM 265.00 265.00 278.25 291.50
Drilling holes in hard granite 32mm diameter RM 140.00 140.00 147.00 154.00
D. Earth Work
Sand & Silt Under Water SS20B Earth work excavating and
depositing on bank with a initial lead of 10 m & initial lift of 2m in
cu.m. 61.10 61.10 64.16 67.21
Slush and silt under water upto 0.75m depth requiring the aid of
basket and vessels SS.20.B
Trimming the bed and the side slope of the bank in all soils
except hard rock upto a thickness of 7.5 cm and making it ready cu.m. 12.50 12.50 13.13 13.75
to receive the concrete
Trimming the bed and the side slope of the bank in all soils
except hard rock upto a thickness of 7.5 cm to 15 cm and cu.m. 15.10 15.10 15.86 16.61
making it ready to receive the concrete
Sectioning during forming bunds when earth moving
cu.m. 9.20 9.20 9.66 10.12
machineries, lorries and rollers are used for consolidation.
Extra for every additional 10 metre lead or part thereof over the
cu.m. 8.90 8.90 9.35 9.79
initial lead
Extra for every additional 1 metre lift or part thereof over the
cu.m. 7.10 7.10 7.46 7.81
initial lift
Breaking clods, consolidating and sectioning cu.m. 4.40 4.40 4.62 4.84
By power roller including hire charges cu.m. 25.50 25.50 26.78 28.05
Benching Old Embankment Slopes 45cm x 45cm cu.m. 2.80 2.80 2.94 3.08
Sinking well in loose soils, light black cotton soil, sandy loam and
ordinary soil under water including bailing or pumping charges if cu.m. 75.70 75.70 79.49 83.27
necessary etc., complete First depth of 2 metres
Sinking well in Sand, including bailing or pumping charges if
cu.m. 106.20 106.20 111.51 116.82
necessary etc., complete - First depth of 2 metres
Sinking well in hard stiff clay, light black cotton soil, hard red
earth, shales, murram, gravel, stoney earth, and earth mixed
with small size boulders and hard gravelly soil including bailing or cu.m. 106.20 106.20 111.51 116.82
pumping charges if necessary etc., complete - First depth of 2
metres
Earth work in all soils except hard rock requiring blasting and
conveying for formation of bund with lead of 0 to 100 metre
deploying earth moving machineries and tippers including cu.m. 45.55 45.55 47.83 50.11
benching, formation of bunds, breaking clods, sectioning etc
complete
Earth work in all soils except hard rock requiring blasting and
conveying for formation of bund with an extra lead of every 100
metre or part thereof deploying earth moving machineries and cu.m. 3.60 3.60 3.78 3.96
tippers including benching, formation of bunds, breaking clods,
sectioning etc complete
Add to the basic rates for works upto 4.50M height in ground
floor (height to be reckoned from floor level ie., plinth level in cu.m. 78.20 78.20 82.11 86.02
GL)
Add for works in every upper floor over the rate of preceeding
cu.m. 154.00 154.00 161.70 169.40
floor
Add to the basic rates for works upto 4.50M height in ground
floor (height to be reckoned from floor level ie., plinth level in cu.m. 51.50 51.50 54.08 56.65
GL)
Add for works in every upper floor over the rate of preceeding
cu.m. 103.80 103.80 108.99 114.18
floor
STATEMENT II
Concrete, Below ground level
Add the basic rate for works above 1.50m depth and upto 4.5m
cu.m. 77.00 77.00 80.85 84.70
depth below ground level
Add the basic rate for works above 4.50m depth and upto 9m
cu.m. 154.50 154.50 162.23 169.95
depth below ground level
Add extra over the above item 2 for every additional 4.50m
cu.m. 154.50 154.50 162.23 169.95
depth beyond 9.0m depth below ground level
Add the basic rate for works above 1.50m depth and upto 4.50m
cu.m. 51.70 51.70 54.29 56.87
depth below GL
Add the basic rate for works above 4.50m depth and upto 9.0m
cu.m. 103.80 103.80 108.99 114.18
depth below GL
Add extra over the above item 2 for every additional 4.50m
cu.m. 103.80 103.80 108.99 114.18
depth beyond 9.0m depth below ground level
Scaffolding Charges for Painting for Repair Works only over 10m
sq.m. 0.00 0.00
above Ground Level
Clean removal of lime plaster from walls and racking out joints
20 mm deep or from terraced roofs racking out joints 12 mm sq.m. 6.20 6.20 6.51 6.82
deep
Clean removal of lime plaster from walls sq.m. 4.80 4.80 5.04 5.28
Clean removal of Cement plaster from walls sq.m. 5.10 5.10 5.36 5.61
Thorough scrapping of old plastered surface sq.m. 2.80 2.80 2.94 3.08
Washing of plastered surface with soap, soda and water (or with
sq.m. 3.50 3.50 3.68 3.85
soda lime, brush and water)
Removing old paint from doors and windows by blow lamp and
sq.m. 22.60 22.60 23.73 24.86
scrapping, including removal and re-fitting of shutters.
Removing old paint from iron surface with sand paper sq.m. 5.70 5.70 5.99 6.27
L. Miscellaneous
Supplying and filling up the empty cement gunny bags with sand,
stitching them, conveying the same to site and stacking as
Bag 5.70 5.70 5.99 6.27
directed within a lead of 10 m excluding cost of bags, Jute,
thread, needle,sand etc., (Labour only)
Brush wood bundles one metre girth and one metre long within one
2.90 2.90 3.05 3.19
an initial lead of 1.6 K.M. bundle
one
Extra for every additional lead of 1.6 KM (for the above item) 0.34 0.34 0.36 0.37
bundle
Driving casurina piles into bed including scaffolding etc.,
RM 7.30 7.30 7.67 8.03
complete
40 mm dia G.I. Pipe Threading (48.40) Each 27.90 27.90 29.30 30.69
50 mm dia G.I. Pipe Threading (13.50) Each 31.00 31.00 32.55 34.10
100 mm dia G.I. Pipe Cutting Each 31.00 31.00 32.55 34.10
100 mm dia G.I. Pipe Threading Each 62.40 62.40 65.52 68.64
P.Breaking Metals
Q.Cement Mortar
Grinding Mortar (Special Grinding lime) cu.m. 241.00 241.00 253.05 265.10
Grinding Mortar (Ordinary grinding lime) cu.m. 184.00 184.00 193.20 202.40
Mixing Mortar - Cement by Machine Mixing cu.m. 100.00 100.00 105.00 110.00
Petty ironwork for truss, straps etc., (Wrought & fixed) labour
Kg 36.20 36.20 38.01 39.82
only
Iron works for trusess & record racks (labour only) Kg 33.40 33.40 35.07 36.74
Supplying & fixing mild steel grills for windows, ventilators, etc.,
Kg 20.90 20.90 21.95 22.99
including priming coat.
Fixing M.S.Rods round / square for windows Kg 19.40 19.40 20.37 21.34
Fixing Iron bars in windows and ventilators Kg 19.40 19.40 20.37 21.34
Dismantling RCC Using deploying machinaries cum 3229.00 3229.00 3390.45 3551.90
3000000.00
3000000.00
200000.00
298704.00
298704.00
499783.00
1487411.00
1487411.00
500000.00
2484906.00
1495360.00
100000.00
50000.00
500000.00
400000.00
159300.00
20000.00
13000.00
500.00
208507.00
15356.00
1800000.00
1700000.00
208507.00
15356.00
1800000.00
208507.00
15356.00
1800000.00
187000.00
1787480.00
994920.00
-25000.00
208507.00
1800000.00
187000.00
1787480.00
994920.00
-25000.00
26711068.00
179027425.00
500000.00
LEAD STATEMENT - 2019-2020
Page 1
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
1.00 cu.m. SAND FOR MORTAR 733.96 cu.m. 733.96
1.00 cu.m. GRINDING MORTAR 184.00 cu.m. 184.00
Rate for 1 cu.m. 1553.96
9.50 cu.m. Broken Brick Jelly (40mm size ) 722.00 cu.m. 6859.00
3.80 cu.m. Lime Mortar 1:2 1386.46 cu.m. 5268.55
1.80 Nos. Mason II Class 609.00 Each 1096.20
17.70 Nos. Mazdoor I Class 426.00 Each 7540.20
14.10 Nos. Mazdoor II Class 368.00 Each 5188.80
Total for 10 cu.m. 25953.00
Rate for 1 cu.m. 2595.30
* 9.50 cu.m. Broken Brick Jelly (20mm size ) 798.00 cu.m. 7581.00
J 3.80 cu.m. Lime Mortar 1:2 1386.46 cu.m. 5268.55
1.80 Nos. Mason II Class 609.00 Each 1096.20
17.70 Nos. Mazdoor I Class 426.00 Each 7540.20
14.10 Nos. Mazdoor II Class 368.00 Each 5188.80
Total for 10 cu.m. 26675.00
Rate for 1 cu.m. 2667.50
Page 2
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
12 Priming coat for new iron work - 10 sq.m.
1.33 lit. Red oxide primer 133.00 lit. 176.89
0.70 Nos. Painter I Class 522.00 Nos. 365.40
Sundries for brushes etc., LS 2.65
Page 3
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
MAIN DATA
1 Earth work excavation for foundation (for narrow excavation) in all
soils and sub-soils and to full depth as may be directed except in rock
requiring blasting inclusive of shoring shuttering, bailing out water
wherever necessary and depositing the surplus earth within the compound
in places shown by the departmental officers with an initial lead of 10 mts
and initial lift of 2 mts. and clearing and levelling the site, etc., complete
complying with standard specification.
Note: The cost of earth work excavation shall be calculated based on the
classifications of soils furnished in the trial pit details appended with the
estimates
cu.m. Earth work excavation in soil 60.95 cu.m. 60.95
1.00
(average rate) (HS+OS)/2 (42.50+63.60/2)
1.00 cu.m. Add 100% extra 60.95 cu.m. 60.95
0.33 cu.m. Refilling charges 25.50 cu.m. 8.50
130.40
Rate for 1 cu.m. 130.40
2 Earth work open excavation in all soils and sub-soils and to full depth
as may be directed except in rock requiring blasting inclusive of shoring
shuttering, bailing out water wherever necessary and depositing the
excavated earth with a lead of 10 mts. within the compound in places
shown by the departmental officers and clearing and levelling the site,
etc., complete complying with standard specification.
1.00 cu.m. Earth work excavation in soil (average rate) 60.95 cu.m. 60.95
Rate for 1 cu.m. 60.95
4 Refilling with excavated earth other than sand with an initial head load of
100 mts. and depositing the earth as shown by the departmental officers in
layers of not more than 15 cm thick well rammed, watered and consolidated etc.
complete complying with standard specification
Page 4
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
317.10
Rate for 1 cu.m. 317.10
7 Supplying and filling 40mm guauge HBGS stone jelly for dispersion
trench including loading conveying and unloading and as directed by the
departmental officers etc. complete complying with standard specification.
8 Supplying and filling 25mm guauge HBGS stone jelly for dispersion
trench including loading conveying and unloading and as directed by the
departmental officers etc. complete complying with standard specification.
MAIN DATA
0.50 M3 Cost of filling sand 733.96 M3 366.98
0.50 M3 Cost of filling Graval 291.60 M3 145.80
1.00 M3 Mixing charges 75.70 M3 75.70
0.50 M3 Labour for filling sand 22.40 M3 11.20
0.50 M3 Labour for filling gravel 25.50 12.75
612.43
Rate for 1 cu.m. 612.40
11 Providing and laying sand gravel mix (1:1) at the rate of 0.62 cu.m of
filling sand and 0.66 cu .m of gravel to consolidated 1hide of 150mm
designed to attain a CBR value of not less than 20 including cost and
conveyance of sand gravel from approved sources to work site and
stacking them to the departmental gauge for premeasurement including
labour charges labour charges for power roller watering and all other tools
and plants employed including all other incidental charges etc., complete
(For road works)
Page 5
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
47.90
=40.20/2 23.95
MAIN DATA
0.55 M3 Cost of filling sand 733.96 M3 403.68
0.58 M3 Cost of filling Graval 291.60 M3 169.13
1.00 M3 Mixing charges 119.87 M3 119.87
1.00 M3 Filling charges 23.95 M3 23.95
716.63
Rate for 1 cu.m. 716.63 /M3 716.60
12 Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken
stone jelly) using 40 mm gauge hard broken granite stone jelly for
foundation including dewatering wherever necessary and laid in layers
of not more than 15 cm thick well rammed, consolidated and curing etc.
complete complying with standard specification
9.00 cu.m. Broken stone Jelly - 40mm size 1199.28 cu.m. 10793.52
4.50 cu.m. Cement mortar (1:5) 2471.17 cu.m. 11120.28
1.80 Nos. Mason II Class 609.00 Each 1096.20
17.70 Nos. Mazdoor I Class 426.00 Each 7540.20
14.10 Nos. Mazdoor II Class 368.00 Each 5188.80
Total for 10 cu.m. 35739.00
3573.90
Rate for 1 cu.m. 3573.90
13 Cement Concrete 1:5:10 (One cement, Five sand and Ten hard broken
stone) using 40 mm gauge hard broken jelly for flooring including laying,
consolidating, finishing, rendering the top surface rough to receive the
floor, curing, etc. complete complying with standard specification. (The
rate is inclusive of necessary planking for panelling wherever necessary
and as directed by the departmental officers
9.00 cu.m. 40mm Machine Crushed Stone Jelly 1199.28 cu.m. 10793.52
4.50 cu.m. Cement mortar (1:5) 2471.17 cu.m. 11120.28
1.80 Nos. Mason II Class 609.00 Each 1096.20
17.70 Nos. Mazdoor I Class 426.00 Each 7540.20
14.10 Nos. Mazdoor II Class 368.00 Each 5188.80
Total for 10 cu.m. 35739.00
3573.90
Rate for 1 cu.m. 3573.90
14 Cement Concrete 1:4:8 (One Cement, Four sand and eight hard broken
stone jelly) using 40 mm gauge hard broken granite stone jelly for
foundation including dewatering wherever necessary and laid in layers of
not more than 15 cm thick, well rammed, consolidated and curing etc.
complete complying with standard specification
* 9.00 cu.m. Broken stone Jelly - 40mm size 1199.28 cu.m. 10793.52
M 4.50 cu.m. Cement mortar (1:4) 2886.55 cu.m. 12989.48
1.80 Nos. Mason II Class 609.00 Each 1096.20
17.70 Nos. Mazdoor I Class 426.00 Each 7540.20
14.10 Nos. Mazdoor II Class 368.00 Each 5188.80
Total for 10 cu.m. 37608.20
Rate for 1 cu.m. 3760.80
Page 6
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
15 Cement Concrete 1:3:6 (One Cement, Three sand and Six broken stone
jelly) using 40mm size hard broken stone jelly for dummy columns,
excluding cost of centering shuttering reinforcement grills and fabrication
charges but including curing etc. complete. (Reinforced Cement Concrete
1:2:4 for slab to be extended upto top of splashing with pressed tiles and
future extension rods to be embedded in CC 1:3:6 (One Cement, Three
Sand and Six hard broken stone jelly). Dummy columns should be at
least 1 metre height)
16 Plain Cement Concrete 1:2:4 (one cement, two sand and four hard
broken stone jelly) using 20mm jelly for wearing coat including laying,
compacting, finishing and curing, etc., complete as per standard
specificatins and as directed by the departmental officers.
17 Damp proof course with Cement Mortar 1:4 (One Cement and Four
sand) 12mm thick mixed with best approved quality water proofing
compound conforming to Indian Standard specification as specified by the
departmental officers at 2% by weight of cement used, finishing and
curing etc. complete complying with standard specification.
Page 7
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
18 Supplying and erecting steel centering including necessary supports for
plane surfaces for Reinforced Cement Concrete works such as column
footings, column pedestals, plinth beams, grade beams, staircase steps,
etc. which require only nominal strutting using mild steel sheets of size
90cm x 60cm and 10 BG stiffened with welded mild steel angles of size
25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size
10cm x 6.5cm spaced at about 75cm centre to centre or at suitable
intervals etc. complete in all floors complying with standard specifcation.
(Payment for centering shall be given after the concrete is laid)
a For plane surfaces such as RCC floor slab, roof slab, beams, lintels,
bed blocks, landing slab, waist slab, portico slabs and beams, etc.
Sub Data: 1
Cost of MS sheets and angles for each set:
Weight of MS sheets 10 gauge of size 90cm x
60cm x 3.175mm
3.175 x 7850 / 1000 x 0.54 = 13.46 Kg
Weight of MS angles of size 25cm x 25mm x
3mm:
3.6 x 1.1 kg / m = 4.00 Kg
Page 8
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Set Cost of MS sheets and MS angles (as per A) 791.29 Each 15034.46
19.00
(Adopting 40 uses)
Total for 40 uses 15034.46
Total for 1 use / sq.m. (B) 375.86
0.12 cu.m. Cost of silver oak joists of size 10cm x 6.5cm 15500.00 cu.m. 1860.00
98.50 RM Cost of casurina props 10 to 13cm dia. 25.20 RM 2482.20
Total for 5 uses 4342.20
(Adopting 5 uses for silver oak / country wood 4342.20
joists and casurina props
Total for 1 use / sq.m. (C) 868.44
1.00 sq.m. Centering for slab, etc., as per (a) 667.00 1 sq.m. 667.00
Add 10% extra 66.70
Total for 1 sq.m. 733.70
(or) Total for 1 sq.m. 733.70
c For plane surfaces such as rectangular or square RCC columns,
sunshades, top and bottom slab of RCC boxing, etc.
1.00 sq.m. Centering for slab and beams etc., as per (a) 667.00 1 sq.m. 667.00
Add 20% extra 133.40
Total for 1 sq.m. 800.40
(or) Total for 1 sq.m. 800.40
Page 9
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
20 Providing additional strutting to centering of RCC slabs of plain surface
for every additional 1.0 metre height or part thereof but not less than 30
cm, over the initial 3.00 metre height from floor level using casurina props
of 10cm to 13cm dia including cross bracing etc., complete complying with
standard specification and as directed by the department officers.
21 Cement Concrete 1:2:4 (One Cement, Two sand and Four hard broken
stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC
items of works excluding cost of reinforcement grill and fabricating
charges, centering and shuttering but including laying, vibrating with
mechanical vibrators, finishing, curing, etc. and providing fixtures like fan
clamps in the RCC floor / roof slabs wherever necessary and bearing
surfaces of walls, beams etc. shall be finished smooth with Cement Mortar
1:3 (One Cement and Three Sand) and kraft paper laid over it without
claiming extra, etc., complete complying with standard specification and
as directed by the departmental officers
9.00 cu.m. 20mm Machine Crushed Stone Jelly 1583.28 cu.m. 14249.52
4.50 cu.m. Sand 733.96 cu.m. 3302.82
3231.00 kg Cement 5769.14 MT 18640.09
3.50 Nos. Mason II Class 609.00 Each 2131.50
21.20 Nos. Mazdoor I Class 426.00 Each 9031.20
35.30 Nos. Mazdoor II Class 368.00 Each 12990.40
Total for 10 cu.m. 60345.53
6034.60
Add for vibration charges 61.50
Rate for 1 cu.m. 6096.10
Rate for 1 cu.m.:
a Foundation and Basement 6096.10
b For Ground floor 6096.10 78.20 6174.30
c For First floor 6174.30 154.00 6328.30
d For Second floor 6328.30 154.00 6482.30
e For Third floor 6482.30 154.00 6636.30
f For Fourth floor 6636.30 154.00 6790.30
g For Fifth floor 6790.30 154.00 6944.30
22 Cement Concrete 1:1-1/2:3 (One Cement, One and a half sand and
Three hard broken stone jelly) using 20 mm gauge hard broken granite
stone jelly for all RCC items of works excluding cost of reinforcement grill
and fabricating charges centering and shuttering but including laying,
vibrating with mechanical vibrators, finishing, curing, etc. and providing
fixtures like fan clamps in the RCC floor / roof slabs wherever necessary
and bearing surfaces of walls, beams etc. shall be finished smooth with
Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid
over it without claiming extra, etc., complete complying with standard
specification and as directed by the departmental officers
9.00 cu.m. 20mm Machine Crushed Stone Jelly 1583.28 cu.m. 14249.52
4.50 cu.m. Sand 733.96 cu.m. 3302.82
Page 10
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
4308.00 kg Cement 5769.14 MT 24853.46
3.50 Nos. Mason II Class 609.00 Each 2131.50
21.20 Nos. Mazdoor I Class 426.00 Each 9031.20
35.30 Nos. Mazdoor II Class 368.00 Each 12990.40
Total for 10 cu.m. 66558.90
6655.89
Add for vibration charges 61.50
Rate for 1 cu.m. 6717.39
Rate for 1 cu.m.:
a Foundation and Basement 6717.39
b For Ground floor 6717.39 78.20 6795.59
c For First floor 6795.59 154.00 6949.59
d For Second floor 6949.59 154.00 7103.59
e For Third floor 7103.59 154.00 7257.59
f For Fourth floor 7257.59 154.00 7411.59
g For Fifth floor 7411.59 154.00 7565.59
Page 11
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
1700.00 Nos. Country bricks of size 8.75" x 4.25" x 2.25" 4303.88 1000 Nos. 7316.60
0.793 cu.m. Cement mortar 1:5 2471.17 cu.m. 1959.64
1.00 Nos. Mason I Class 652.00 Each 652.00
2.00 Nos. Mason II Class 609.00 Each 1218.00
2.00 Nos. Mazdoor I Class 426.00 Each 852.00
4.00 Nos. Mazdoor II Class 368.00 Each 1472.00
Total for 100 cft (or) 2.83168 cu.m. 13470.24
Rate for 1 cu.m. 4757.00
Rate for 1 cu.m.:
a For foundation & basement 4757.00 4757.00
b In Ground floor 4757.00 51.50 4808.50
c In First floor 4808.50 103.80 4912.30
d In Second floor 4912.30 103.80 5016.10
e In Third floor 5016.10 103.80 5119.90
f In Fourth floor 5119.90 103.80 5223.70
Page 12
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
a Brick work using using Country Bricks of size 8-3/4" x 4-1/4" X2-
3/4" in Cement Mortar 1:6 (One cement and six sand) including
curing neat finishing, etc., complete complying with standard specifiction.
Page 13
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
b Brick work using Country Bricks of size 8-3/4" x 4-1/4" X2-3/4"" in
Cement Mortar 1:5 (One cement and five sand) including curing neat
finishing, etc., complete complying with standard specifiction.
* In Cement Mortar 1:5
M 1300.00 Nos. using Country Bricks of size 5453.88 1000 Nos. 7090.04
8-3/4" x 4-1/4" X2-3/4"
0.708 cu.m. Cement mortar 1:5 2471.17 cu.m. 1749.59
1.00 Nos. Mason I Class 652.00 Each 652.00
2.00 Nos. Mason II Class 609.00 Each 1218.00
2.00 Nos. Mazdoor I Class 426.00 Each 852.00
4.00 Nos. Mazdoor II Class 368.00 Each 1472.00
Total for 100 cft (or) 2.83168 cu.m. 13033.63
Rate for 1 cu.m. 4602.80
a Rate for 1 cu.m.:
b For foundation & basement 4602.80 4602.80
In Ground floor 4602.80 51.50 4654.30
In First floor 4654.30 103.80 4758.10
In Second floor 4758.10 103.80 4861.90
25 Brick work in following Cement Mortar using best quality II class table
moulded chamber burnt bricks of size 9" x 4-1/2" x 3" for
foundation and basement including curing, etc., complete complying with
standard specifiction.
Page 14
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
f In Fourth floor 5955.40 103.80 6059.20
C In Cement Mortar 1:3
1160.00 Nos. II class table moulded bricks 9" x 4-1/2" x 3" 7549.64 1000 Nos. 8757.58
0.623 cu.m. Cement mortar 1:3 3578.85 cu.m. 2229.62
1.00 Nos. Mason I Class 652.00 Each 652.00
3.00 Nos. Mason II Class 609.00 Each 1827.00
2.00 Nos. Mazdoor I Class 426.00 Each 852.00
6.00 Nos. Mazdoor II Class 368.00 Each 2208.00
Total for 100 cft (or) 2.83168 cu.m. 16526.20
Rate for 1 cu.m. 5836.20
Rate for 1 cu.m.:
a For foundation & basement 5836.20 5836.20
b In Ground floor 5836.20 51.50 5887.70
c In First floor 5887.70 103.80 5991.50
d In Second floor 5991.50 103.80 6095.30
e In Third floor 6095.30 103.80 6199.10
f In Fourth floor 6199.10 103.80 6302.90
26 Brick work in following Cement Mortar using best quality II class table
moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" for
foundation and basement including curing, etc., complete complying with
standard specifiction.
A In Cement Mortar 1:6
1300.00 Nos. II class table moulded bricks 9"x4-3/8"x2-3/4" 7264.64 1000 Nos. 9444.03
0.708 cu.m. Cement mortar 1:6 2194.25 cu.m. 1553.53
1.00 Nos. Mason I Class 652.00 Each 652.00
3.00 Nos. Mason II Class 609.00 Each 1827.00
2.00 Nos. Mazdoor I Class 426.00 Each 852.00
6.00 Nos. Mazdoor II Class 368.00 Each 2208.00
Total for 100 cft (or) 2.83168 cu.m. 16536.56
Rate for 1 cu.m. 5839.85
Rate for 1 cu.m.:
a For foundation & basement 5839.85 5839.85
b In Ground floor 5839.85 51.50 5891.35
c In First floor 5891.35 103.80 5995.15
d In Second floor 5995.15 103.80 6098.95
e In Third floor 6098.95 103.80 6202.75
f In Fourth floor 6202.75 103.80 6306.55
g In Fifth floor 6306.55 103.80 6410.35
Page 15
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
d In Second floor 6064.40 103.80 6168.20
e In Third floor 6168.20 103.80 6272.00
f In Fourth floor 6272.00 103.80 6375.80
27 Brick work in following Cement Mortar using best quality II class Ground
moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" for
foundation and basement including curing, etc., complete complying with
standard specifiction.
A In Cement Mortar 1:6
* 1300.00 Nos. II class Ground moulded bricks 9"x4-3/8"x2-3/4" 6334.64 1000 Nos. 8235.03
J 0.708 cu.m. Cement mortar 1:6 2194.25 cu.m. 1553.53
1.00 Nos. Mason I Class 652.00 Each 652.00
3.00 Nos. Mason II Class 609.00 Each 1827.00
2.00 Nos. Mazdoor I Class 426.00 Each 852.00
6.00 Nos. Mazdoor II Class 368.00 Each 2208.00
Total for 100 cft (or) 2.83168 cu.m. 15327.56
Rate for 1 cu.m. 5412.90
Rate for 1 cu.m.:
a For foundation & basement 5412.90 5412.90
b In Ground floor 5412.90 51.50 5464.40
c In First floor 5464.40 103.80 5568.20
d In Second floor 5568.20 103.80 5672.00
e In Third floor 5672.00 103.80 5775.80
f In Fourth floor 5775.80 103.80 5879.60
g In Fifth floor 5879.60 103.80 5983.40
Page 16
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
c In First floor 5533.65 103.80 5637.45
d In Second floor 5637.45 103.80 5741.25
e In Third floor 5741.25 103.80 5845.05
f In Fourth floor 5845.05 103.80 5948.85
28 Brick work in following Cement Mortar using best quality II class Ground
moulded chamber burnt bricks of size 9" x 4-1/2" x 3" for
foundation and basement including curing, etc., complete complying with
standard specifiction.
* Nos. II class Ground moulded chamber burnt bricks of 6519.64 1000 Nos. 7562.78
1160.00 size 9" x 4-1/2" x 3"
Page 17
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
3.00 Nos. Mason II Class 609.00 Each 1827.00
2.00 Nos. Mazdoor I Class 426.00 Each 852.00
6.00 Nos. Mazdoor II Class 368.00 Each 2208.00
Total for 100 cft (or) 2.83168 cu.m. 15331.40
Rate for 1 cu.m. 5414.25
Rate for 1 cu.m.:
a For foundation & basement 5414.25 5414.25
b In Ground floor 5414.25 51.50 5465.75
c In First floor 5465.75 103.80 5569.55
d In Second floor 5569.55 103.80 5673.35
e In Third floor 5673.35 103.80 5777.15
f In Fourth floor 5777.15 103.80 5880.95
b Ground Floor
1.08 cu.m. Brick Work in C.M.1:3 in Ground floor 5118.70 cu.m. 5528.20
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 6180.20
Rate for 1 sq.m. 618.05
c First Floor
1.08 cu.m. Brick Work in C.M.1:3 in First Floor 5222.50 cu.m. 5640.30
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 6292.30
Rate for 1 sq.m. 629.25
d Second Floor
1.08 cu.m. Brick Work in C.M.1:3 in Second Floor 5326.30 cu.m. 5752.40
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 6404.40
Rate for 1 sq.m. 640.45
e Third Floor
1.08 cu.m. Brick Work in C.M.1:3 in Third Floor 5430.10 cu.m. 5864.51
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 6516.51
Rate for 1 sq.m. 651.70
f Fourth Floor
1.08 cu.m. Brick Work in C.M.1:3 in Fourth Floor 5533.90 cu.m. 5976.61
1.00 No. Extra Mason I Class 652.00 Each 652.00
Page 18
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Total for 10 sq.m. 6628.61
Rate for 1 sq.m. 662.90
Page 19
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Brick partition walls of 10.80cm- country bricks of size
8-3/4" x 4-1/4" X2-3/4"
30 Brick partition walls using best quality using Country Bricks of
size 8-3/4" x 4-1/4" X2-3/4" in Cement Mortar 1:3 (One Cement and
Three Sand) using hoop iron reinforcement if found necessary including
curing etc. complete and as directed by the departmental officers. (Hoop
iron reinforcement will be measured and paid for separately)
b Ground Floor
1.08 cu.m. Brick Work in C.M.1:3 in Ground floor 4931.25 cu.m. 5325.75
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 5977.75
Rate for 1 sq.m. 597.80
b First Floor
1.08 cu.m. Brick Work in C.M.1:3 in FF 5035.05 cu.m. 5437.85
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 6089.85
Rate for 1 sq.m. 609.00
b II Floor
1.08 cu.m. Brick Work in C.M.1:3 in SF 5138.85 cu.m. 5549.96
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 6201.96
Rate for 1 sq.m. 620.20
e Third Floor
1.08 cu.m. Brick Work in C.M.1:3 in Third Floor 5242.65 cu.m. 5662.06
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 6314.06
Rate for 1 sq.m. 631.45
Page 20
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
f Fourth Floor
1.08 cu.m. Brick Work in C.M.1:3 in Fourth Floor 5346.45 cu.m. 5774.17
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 6426.17
Rate for 1 sq.m. 642.65
b Ground Floor
1.15 cu.m. Brick Work in C.M.1:3 in Ground floor 5887.70 cu.m. 6770.86
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7422.86
Rate for 1 sq.m. 742.30
c First Floor
1.15 cu.m. Brick Work in C.M.1:3 in first Floor 5991.50 cu.m. 6890.23
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7542.23
Rate for 1 sq.m. 754.25
d Second Floor
1.15 cu.m. Brick Work in C.M.1:3 in Second Floor 6095.30 cu.m. 7009.60
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7661.60
Rate for 1 sq.m. 766.20
e Third Floor
1.15 cu.m. Brick Work in C.M.1:3 in Third Floor 6199.10 cu.m. 7128.97
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7780.97
Rate for 1 sq.m. 778.10
f Fourth Floor
1.15 cu.m. Brick Work in C.M.1:3 in Fourth Floor 6302.90 cu.m. 7248.34
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7900.34
Rate for 1 sq.m. 790.05
Page 21
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
1.15 cu.m. Brick work in C.M.1:3 in F & B 6186.05 cu.m. 7113.96
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7765.96
Rate for 1 sq.m. 776.60
b Ground Floor
1.15 cu.m. Brick Work in C.M.1:3 in Ground floor 6237.55 cu.m. 7173.18
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7825.18
Rate for 1 sq.m. 782.55
c First Floor
1.15 cu.m. Brick Work in C.M.1:3 in First Floor 6341.35 cu.m. 7292.55
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7944.55
Rate for 1 sq.m. 794.50
d Second Floor
1.15 cu.m. Brick Work in C.M.1:3 in Second Floor 6445.15 cu.m. 7411.92
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 8063.92
Rate for 1 sq.m. 806.40
e Third Floor
1.15 cu.m. Brick Work in C.M.1:3 in Third Floor 6548.95 cu.m. 7531.29
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 8183.29
Rate for 1 sq.m. 818.35
f Fourth Floor
1.15 cu.m. Brick Work in C.M.1:3 in Fourth Floor 6652.75 cu.m. 7650.66
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 8302.66
Rate for 1 sq.m. 830.30
Page 22
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
d In Second floor 5914.40 103.80 6018.20
e In Third floor 6018.20 103.80 6122.00
f In Fourth floor 6122.00 103.80 6225.80
a Foundation and basement
1.15 cu.m. Brick work in C.M.1:3 in F & B 5759.10 cu.m. 6622.97
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7274.97
Rate for 1 sq.m. 727.50
b Ground Floor
1.15 cu.m. Brick Work in C.M.1:3 in Ground floor 5810.60 cu.m. 6682.19
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7334.19
Rate for 1 sq.m. 733.45
c First Floor
1.15 cu.m. Brick Work in C.M.1:3 in First Floor 5914.40 cu.m. 6801.56
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7453.56
Rate for 1 sq.m. 745.40
d Second Floor
1.15 cu.m. Brick Work in C.M.1:3 in Second Floor 6018.20 cu.m. 6920.93
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7572.93
Rate for 1 sq.m. 757.30
e Third Floor
1.15 cu.m. Brick Work in C.M.1:3 in Third Floor 6122.00 cu.m. 7040.30
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7692.30
Rate for 1 sq.m. 769.25
f Fourth Floor
1.15 cu.m. Brick Work in C.M.1:3 in Fourth Floor 6225.80 cu.m. 7159.67
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7811.67
Rate for 1 sq.m. 781.20
Page 23
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
b In Ground floor 5414.25 51.50 5465.75
c In First floor 5465.75 103.80 5569.55
d In Second floor 5569.55 103.80 5673.35
e In Third floor 5673.35 103.80 5777.15
f In Fourth floor 5777.15 103.80 5880.95
a Foundation and basement
1.15 cu.m. Brick work in C.M.1:3 in F & B 5414.25 cu.m. 6226.39
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 6878.39
Rate for 1 sq.m. 687.85
b Ground Floor
1.15 cu.m. Brick Work in C.M.1:3 in Ground floor 5465.75 cu.m. 6285.61
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 6937.61
Rate for 1 sq.m. 693.80
c First Floor
1.15 cu.m. Brick Work in C.M.1:3 in First Floor 5569.55 cu.m. 6404.98
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7056.98
Rate for 1 sq.m. 705.70
d Second Floor
1.15 cu.m. Brick Work in C.M.1:3 in Second Floor 5673.35 cu.m. 6524.35
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7176.35
Rate for 1 sq.m. 717.65
e Third Floor
1.15 cu.m. Brick Work in C.M.1:3 in Third Floor 5777.15 cu.m. 6643.72
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7295.72
Rate for 1 sq.m. 729.60
f Fourth Floor
1.15 cu.m. Brick Work in C.M.1:3 in Fourth Floor 5880.95 cu.m. 6763.09
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7415.09
Rate for 1 sq.m. 741.55
Page 24
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
14.10 Each Mazdoor II Class 368.00 Each 5188.80
Total for 10 cu.m. 48020.70
Rate for 1 cu.m. 4802.07
MAIN DATA
a For 20mm thick
0.20 cu.m. Cement Concrete 1:2:4 4802.07 cu.m. 96.04
LS Add for top rubbed smooth with power trawl, LS 4.80
thread lining, curing etc.,
Rate for 1 sq.m. 100.84
Rate for 1 sq.m. 100.85
b For 25mm thick
0.25 cu.m. Cement Concrete 1:2:4 4802.07 cu.m. 120.05
LS Add for top rubbed smooth with power trawl, LS 6.00
thread lining, curing etc.,
Page 25
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
2.00 Units Electricity charges 11.60 Unit 23.20
Total for 10 sq.m. 25403.63
Rate for 1 sq.m. 2540.40
B Using Marble Slabs of size 2'0'' x 2.0" and below
(Observed Data)
10.00 sq.m. Marble Slabs of size 4'0'' x 2'0'' and above 682.00 sq.m. 6820.00
0.21 cu.m. Cement Mortar 1:3 3578.85 cu.m. 751.56
18.00 Kg White Cement 22.00 Kg 396.00
3.00 Nos. Mason I Class 652.00 Each 1956.00
1.25 Nos. Mason II Class 609.00 Each 761.25
0.50 Nos. Stone Cutter I Class 501.00 Each 250.50
8.00 Nos. Mazdoor I Class 426.00 Each 3408.00
7.00 Nos. Mazdoor II class 368.00 Each 2576.00
LS Cutting Blades at 12% of Labour Charges LS 1074.21
1.25 Nos. Polishing stone, Rough (80) 65.20 Nos. 81.50
0.75 Nos. Medium (200) 87.10 Nos. 65.33
0.30 Nos. Nice (300) 99.70 Nos. 29.91
1.00 Kg Oxalic Acid 37.80 Kg 37.80
0.25 Kg Tin Oxide 144.90 Kg 90.56
1.00 Kg Marble Powder 4.45 Kg 4.45
0.50 Kg Cotton Waste 10.10 Kg 5.05
1.00 sq.m. Kithan Bag 11.50 sq.m. 11.50
1.00 Day Hire Charges for Polishing Machinary 222.00 Day 222.00
2.00 Units Electricity charges 11.60 Unit 23.20
Total for 10 sq.m. 18564.82
Rate for 1 sq.m. 1856.50
37 Paving the floor with best approved quality fine polished Kota stone slabs of
size 600 x 600 of 18 / 20mm with machine cut edges and matching marble
slab not less than 100mm width other than Adanga Marbles as border laid over a
cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and
three sand) fixing the slabs in true right angles with minimum possible width of
joints and pointing the joints with white cement mixed with mathcing colouring
pigments and polishing with floor polisher to a high degree of finish etc., The kota
stone slabs and other materials to be used shall be got approved by the Executive
Engineer concerned before use on work, etc., complete as per standard
speicification.
Page 26
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
0.21 cu.m. Cement Mortar 1:3 3578.85 cu.m. 751.56
1.10 Nos. Mason I Class 652.00 Each 717.20
2.70 Nos. Mason II Class 609.00 Each 1644.30
2.70 Nos. Mazdoor I Class 426.00 Each 1150.20
3.30 Nos. Mazdoor II Class 368.00 Each 1214.40
LS Cement slurry LS 75.16
4.00 Kg Colour cement 26.60 Kg 106.40
Total for 10 sq.m. 11009.21
Rate for 1 sq.m. 1101.00
38 Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm
(un-polished) in all floors laid in of cement mortor 1:3 (one cement three
sand), 20mm thick and pointed with colour cement neatly including
polishing with polishing stone and oxalic acid etc., so as to perfectly
smooth and glossy and including hire charges for polishing machine and
power consumption charges etc. The kota stone slabs and other materials
to be used shall be got approved by the Executive Engineer concerned
before use on work, etc., complete as per standard speicification.
39 Paving the floor with best approved quality fine polished Granite Stone
Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise
and similar varieties with machine cut edges laid over a cement mortar bed
of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing
the slabs with required cement slurry and laid in true right angles with
minimum possible width of joints and pointing the joints with white cement
mixed with mathcing colouring pigments etc., The granite stone slabs and
other materials to be used shall be got approved by the Executive Engineer
concerned before use on work, etc., complete as per standard speicification.
sq.m. Fine Polished Granite Slab 1200 x 600 of 18 / 1420.00 sq.m. 14200.00
10.00 20mm thick of Synthetic Grey, Paradise and
similar varieties
0.21 cu.m. Cement Mortar 1:3 3578.85 cu.m. 751.56
1.10 Nos. Mason I Class 652.00 Each 717.20
2.70 Nos. Mason II Class 609.00 Each 1644.30
2.70 Nos. Mazdoor I Class 426.00 Each 1150.20
3.30 Nos. Mazdoor II Class 368.00 Each 1214.40
0.50 Nos. Stone Cutter I Class 501.00 Each 250.50
14.00 Kg Cement slurry 5769.14 MT 80.77
Page 27
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
0.50 Kg Cotton Waste 10.10 Kg 5.05
4.00 Kg Colour cement 26.60 1 Kg 106.40
Total for 10 sq.m. 20120.38
Rate for 1 sq.m. 2012.10
39a Paving the floor with fine polished cuddapah stone slab of following
thickness over Cement Mortar 1:3 (One Cement and Three Sand) 20mm
thick over the existing bed of Cement Concrete 1:5:10, (One Cement,
Five Sand and Ten aggregate) and pointing the joints to full depth of slabs
with same mortar mixed with black oxide and the top surface rendered
smooth, curing, etc., The cuddapah stone slabs and other materials to be
used shall be got approved by the Executive Engineer concerned before
use on work, etc., complete complying with standard specification.
Page 28
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
40 Paving the floor with best quality Vertified Tiles of size 600 x 600 x
8mm of approved colour, shade and quality laid in cement mortar 1:3
(one cement and three sand) 20mm thick in all floors and the top pointed
with the white cement mixed same colour pigments etc., complete
complying with standard specification. (The make and brand of the tiles
should be got approved by Executive Engineer before use on works)
Page 29
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
d Designed Ceramic Tiles of size 200x 200 x
6mm
(Observed Data)
* 250.00 Nos. Cost of Tiles 19.80 Each 4950.00
10.00 sq.m. Cost of cement mortar, labour, etc., as above 3272.31
Total for 10 sq.m. 8222.31
Rate for 1 sq.m. 822.30
e
* Plain Ceramic Tiles of size 200x 100 x 6mm
(Observed Data)
Page 30
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
2.70 Nos. Mazdoor I Class 426.00 Nos. 1150.20
3.30 Nos. Mazdoor II Class 368.00 Nos. 1214.40
4.00 Kg Colour Cement 26.60 Kg 106.40
Rate for 10 sq.m. 11574.06
Rate for 1 sq.m. 1157.50
Page 31
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
2a Dadooing with printed design colour glazed
tiles of size 300 x 200 x 6mm
Page 32
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
2a Dadooing with printed design colour glazed
tiles of size 300 x 450 x 8mm
Page 33
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
45 Weathering course in brick jelly lime concrete using broken brick jelly of
size 20mm uniform gauge in pure slaked lime (no sand to be used) to the
proportion of brick jelly to lime being 32:12.5 by volume and laid over the
RCC roof slab in a single layer of required slope and finished by beating
the concrete with wooden beaters of approved pattern, keeping the
surface constantly wet by sprinkling lime jaggery water, etc., complete as
per standard specification and as directed by the deparmental officers.
46 Finishing the top of roof with one course of machine pressed tiles of
size 230mm x 230mm x 20mm of approved quality set in Cement Mortar
1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing
compound conforming to ISS at 2% by weight of cement used and the
joints pointed neatly to full depth of tiles with the same cement mortar
mixed with red oxide and water proofing compound including curing etc.,
complete complying with standard specification and as directed by the
departmental officers
Sub-Data for Pointing with Cement Mortar 1:3
0.04 cu.m. Cement Mortar 1:3 3578.85 cu.m. 143.15
0.384 Kg Water Proofing Compound 41.50 Kg 15.94
2.20 Nos. Mason II Class 609.00 Each 1339.80
0.50 Nos. Mazdoor I Class 426.00 Each 213.00
1.10 Nos. Mazdoor II Class 368.00 Each 404.80
LS Add for red oxide etc., 7.16
Total for 10 sq.m. 2123.85
Rate for 1 sq.m. 212.38
Main Data
189.00 Nos. Pressed Tiles of 230mm x 230mm x 20mm 15564.01 1000 2941.60
0.12 cu.m. Cement Mortar 1:3 3578.85 cu.m. 429.46
10.00 sq.m. Pointing with Cement Mortar 1:3 212.38 sq.m. 2123.85
1.152 Kg Water Proofing Compound 41.50 Kg 47.81
1.10 Nos. Mason I Class 652.00 Each 717.20
2.10 Nos. Mason II Class 609.00 Each 1278.90
2.20 Nos. Mazdoor I Class 426.00 Each 937.20
1.10 Nos. Mazdoor II Class 368.00 Each 404.80
Total for 10 sq.m. 8880.82
Rate for 1 sq.m. 888.10
Page 34
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Therefore rate for 1m2
Page 35
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
250.00 Nos. Pressed Tiles of 200mm x 200mm x 20mm 10997.01 1000 2749.25
* 10.00 sq.m. Labour & Mortor 5939.22 sq.m. 5939.22
8688.47
868.90
Paving the Top of roof with Solar refelective ceramic tiles of size 305 x
305 x 7mm thick of approved quality and colour laid in Cement mortar
1:3 (One cement and three sand) 12mm thick and pointed with tile grout
(Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint,
curing etc., complete complying with standard specification and as
directed by the departmental officers. (The make and brand of the tiles
should be got approved by the Executive Engineer before use on works)
b 38 / 40mm thick
1.00 sq.m. Cost of 38 / 40mm thick cuddapah slab 394.00 1sq.m. 394.00
1.00 sq.m. Labour for fixing 44.70 1sq.m. 44.70
LS Add for Cement Mortar, Black Oxide, etc. LS 20.00
Page 36
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Rate for 1 sq.m. 458.70
Page 37
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
* Supplying and fixing in position best approved of BIS quality PVC rain
water down fall pipes having a pressure of 4 kg. / sq.cm including
cost of necessry PVC shoe, PVC bend, cast iron gratings of required
diameter and special clamps, brass screws, nails, etc., and fixing of cast
iron gratings at junction of parapet and the RCC roof slab including
finishing neatly etc., complete. The rate shall be inclusive of cast of
removable cast iron grating. The PVC pipe shall be fixed in wall with
special type of "U" clamp at the centre of the pipe line in addition to those
for more than 3.0 metre pipe length, etc., complete complying with
standard specification.
Page 38
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
50 Supplying and fixing teak wood hand rails with an over all finsihed
size of 50 x 150mm with architectural designs as directed and fixing in
position etc., including polishing two coats with french (LAC) polish over a
coat of bee's waxing complying with standard specification etc., complete.
The wooden hand rails shall have 12mm groove on both faces at 50mm
from top polished and the groove should be painted with black paint. The
bottom of hand rails should be grooved to receive the MS flats 40 x 6mm
welded with square rods of balustrades
MAIN DATA
0.03 cu.m. Cost of teak wood scantlings above 2m long 111600.00 cu.m. 3264.30
0.03 cu.m. Labour wrought and put up 14805.19 cu.m. 433.05
LS Add 50% extra labour for architectural finishing LS 216.53
3.90 sq.m. Lac Polish 1249.31 10 sq.m. 487.23
LS Sundries for bolts, screws, etc., 41.85
Total for 3 RM 4442.96
Rate for 1 RM 1481.00
51 Supplying and fixing in position steel balustrades using 20mm square
rods spaced at 150mm centre to centre so that the two balustrades in
each step shall be placed centrally and the top of balustrades connected
with the hand rails (cost of hand rail shall be measured and paid
separately) by means of MS flats of size 40mm x 6mm in the groove
40mm x 6mm provided at the bottom of hand rail; the bottom of
balustrades shall be fixed on to the top of step concrete. An additional MS
flat of size 50mm x 6mm shall be provided at the centre of balustrades
connecting all square rods to the entire length including cost of square
rods, flat and applying one coat of red oxide primer to the iron surfaces,
etc., complete complying with standard specification and as directed by
the departmental officers.
Page 39
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
40 x 6mm flat = 1.80 m x 1.90 Kg / RM 3.42 Kg
50 x 6mm flat = 1.80 m x 2.40 Kg / RM 4.32 Kg
MS rod required 28.64 Kg
MS flat required 7.74 Kg
Total 36.38 Kg
DATA
28.64 kg Cost of MS square rod 40.45 Kg 1158.49
7.74 kg Cost of MS flat 40.45 Kg 313.08
36.38 kg Labour charges 19.40 Kg 705.77
Welding charges
75.00 Nos. 40mm flat 1.60 Each 120.00
120.00 Nos. 50mm flat 2.05 Each 246.00
1.26 sq.m. Red oxide primer 54.50 sq.m. 68.67
LS Sundries for dismantling, redoing, fixing with LS 29.43
concrete etc.
52 Supplying and fixing 40mm dia GI pipe for staircase hand rail
including labour charges for cutting, welding and fixing with MS flats
(excluding cost of flat), etc., as directed by the departmental officers
Consider a length hand rail = 3 metres
DATA
3.00 RM 40mm dia GI pipe 161.60 RM 484.80
LS Labour for cutting, welding and fixing LS 48.48
Rate for 3 RM 533.28
Rate for 1 RM 177.76
Page 40
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
1.10 Nos. Mazdoor II Class 368.00 Each 404.80
Total for 10 sq.m. 1680.96
Rate for 1 sq.m. 168.10
55 Plastering with Cement Mortar 1:5 (One cement and Five sand),
20mm thick in all floors including curing etc. complete complying with
standard specification and as directed by the departmental officers.
56 Special ceiling plastering and finishing the exposed surface of all RCC
items of work such as slabs, beams, sunshades, facia, canopy slab,
staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One
Cement and Three Sand) 10mm thick including hacking the surfaces,
providing cement mortar nosing, beading for sunshades, staircases, steps,
landing slabs and curing, etc., in all floors complying with standard
specification and as directed by the departmental officers
57 Plastering the surface of walls with Cement Mortar 1:3 (One cement and
Three sand), 12mm thick in all floors including curing etc., complete
complying with standard specification and as directed by the departmental
officers.
0.14 cu.m. Cement mortar 1:3 3578.85 cu.m. 501.04
1.10 Nos. Mason I Class 652.00 Each 717.20
0.50 Nos. Mazdoor I Class 426.00 Each 213.00
1.10 Nos. Mazdoor II Class 368.00 Each 404.80
Total for 10 sq.m. 1836.04
Rate for 1 sq.m. 183.65
58 Plastering the surface of walls with Cement Mortar 1:3 (One cement and
Three sand), 20mm thick in all floors including curing etc., complete
complying with standard specification and as directed by the departmental
officers.
59 Plastering with Cement Mortar 1:3 (One Cement and Three Sand) 12mm
thick mixed with water proofing compound conforming to BIS at 2%
by weight of cement used including finsihing, curing, etc., complete in all
floors complying with standard specification and as directed by the
departmental officers.
Page 41
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
* 0.14 cu.m. Cement mortar 1:3 3578.85 cu.m. 501.04
M 1.34 Kg Water proofing compound 41.50 Kg 55.78
1.10 Nos. Mason I Class 652.00 Each 717.20
0.50 Nos. Mazdoor I Class 426.00 Each 213.00
1.10 Nos. Mazdoor II Class 368.00 Each 404.80
Total for 10 sq.m. 1891.81
M Rate for 1 sq.m. 189.20
60 Plastering with Cement Mortar 1:3 (One Cement and Three Sand)
20mm thick mixed with water proofing compound conforming to BIS
at 2% by weight of cement used including finsihing, curing, etc., complete
in all floors complying with standard specification and as directed by the
departmental officers.
62 White washing one coat with freshly burnt white shell lime in all floors
including cost of lime, blue powder, fevicol type gum, brushes, scaffolding
charges, etc., complete complying with standard specification and as
directed by the departmental officers.
0.05 cu.m. Fine screened shell lime 1272.00 cu.m. 63.60
1.10 Nos. Mason II Class 609.00 Each 669.90
0.30 Nos. Mazdoor I Class 426.00 Each 127.80
1.90 Nos. Mazdoor II Class 368.00 Each 699.20
LS Gum, conjee water or prickly pear juice including LS 6.36
necessary fire wood and brushes
63 White washing two coats with freshly burnt white shell lime in all floors
including cost of lime, blue powder fevicol type gum, brushes, scaffolding
charges, etc., complete complying with standard specification and as
directed.
0.07 cu.m. Fine screened shell lime 1272.00 cu.m. 89.04
Page 42
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
1.60 Nos. Mason II Class 609.00 Each 974.40
0.50 Nos. Mazdoor I Class 426.00 Each 213.00
2.70 Nos. Mazdoor II Class 368.00 Each 993.60
LS Gum, conjee water or prickly pear juice including LS 8.90
necessary firewood and brushes
64 Colour washing two coats in all floors using best freshly burnt white shell lime
and best quality of approved variety of colouring pigment including cost of lime,
colouring pigments, fevicol type gum, brushes, scaffolding charges etc., complete
complying with standard specification. Mineral colouring pigments not affected by
lime should only be used (stainers and colour solutions should not be used.)
65 Supplying and painting the walls with two coats of cement paint over one
coat of cement primer as instructed by the departmental officers including
preparation of surface curing, etc., complete in all floors complying with standard
specifications (The colour and shade of the cement paint shall be got approved by
the Executive Engineer before use of work).
Main Data
1.00 sq.m. Basic one coat of primer with cement paint 51.10 51.10
1.00 sq.m. For finishing two coats with cement paint 92.85 92.85
Rate per 1 sq.m. 143.95
Page 43
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
66 Supplying and painting the walls with two coats of cement paint as
instructed by the departmental officers including preparation of surface
curing, etc., complete in all floors complying with standard specifications
(The colour and shade of the cement paint shall be got approved by the
Executive Engineer before use of work).
10.00 sq.m. Cleaning the plastered surface 3.50 sq.m. 35.00
3.23 Kg Cement Paint 48.50 Kg 156.66
0.50 Nos. Painter I Class 522.00 Each 261.00
0.50 Nos. Mazdoor I Class 426.00 Each 213.00
0.80 Nos. Mazdoor II Class 368.00 Each 294.40
LS Sundries for brushes, etc. LS 15.67
Rate per 10 sq.m. 975.72
Rate per 1 sq.m. 97.60
67 Supplying and painting the walls with two coats of oil bound distemper
over one coat of water based cement primer including cost for
distemper, primer, cleaning and scrapping the walls, rendering the walls
smooth with necessary putty, brushes, scaffolding arrangements, labour
charges, etc., as per standard specification. (The colour and shade of the
distemper shall be got approved by the Executive Engineer before use of
work).
10.00 sq.m. Basic one coat of primer with cement paint 51.10 sq.m. 511.00
1.34 Kg Distemper 71.70 Kg 96.08
0.50 Nos. Painter I Class 522.00 Each 261.00
0.50 Nos. Mazdoor I Class 426.00 Each 213.00
0.80 Nos. Mazdoor II Class 368.00 Each 294.40
L.s Sundries for brushes etc. LS 4.80
Total for 10 sq.m. 1380.28
Rate for 1 sq.m. 138.05
68 Distempering the old wall and ceiling one coat with best oil bound
distember of approved quality including preparation of surface, the rate
includes cost of brushes, high scaffolding arrangements, neat finishes,
etc., complete complying with standard specification and as directed by
the departmental officers.
For one coat
0.70 m3 oil bound distember 71.70 Kg 50.19
0.25 Nos. Painter I Class 522.00 Each 130.50
0.25 Nos. Mazdoor I Class 426.00 Each 106.50
0.40 Nos. Mazdoor II Class 368.00 Each 147.20
L.s Sundries for brushes etc. LS 2.51
Total for 10 sq.m. 436.90
Rate for 1 sq.m. 43.70
Page 44
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
69 Painting two coats of newly plastered wall surface with ready mixed
plastic emulsion paint of first class quality and of approved colour over
a priming coat including thorough scrapping, clean removal of dirt, and
including necessary plaster of paris putty, wherever required etc.,
complete complying with standard specification.
Two coat
Page 45
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
72 Painting new iron works such as steel doors, windows, ventilators,
window bars, balustrades etc., with two coats of best approved first
quality and colour of synthetic enamel paint over one coat of red oxide
priming coat in all floors including cost of priming coat etc., complete
complying with standard specification. (The make, quality and colour of
paint should be got approved by the Executive Engineer before use on
works.)
Two coat with Primer
1.00 sq.m. One coat of red oxide primer 54.50 sq.m. 54.50
1.00 sq.m. Finishing two coats of synthetic enamel paint 107.00 sq.m. 107.00
Rate for 1 sq.m. 161.50
73 Polishing the teak wood door with two coats of best French (Lac)
polish with approved quality and brand over a coat of bee's waxing
including preparing the wooden surface to receive polishing, etc.,
complete complying as per the standard specifications. (The make, quality
and colour of french polish, bees vax should be got approved by the
Executive Engineer before use on works.)
74 Providing expansion joint in RCC floor slab for 12.5mm width using
polysulphide as sealent on the top and bottom for a depth of 7.5mm
each and packing the inner space using compressible non-absorbent filler
materials including cost of labour for cutting and fixing filler materials and
laying polysulphide sealent with necessary spatula etc., complete
complying with standard specifications and as directed
Sub-Data
8.70 Kg Polysulphide 171.90 Kg 1495.53
0.40 Kg Primer 147.90 Kg 59.16
2.10 sq.m. Filler material 141.00 sq.m. 296.10
60.00 RM Bond breaker 3.65 RM 219.00
8.00 Nos. Mazdoor I Class 426.00 Nos. 3408.00
Rate for 30 RM / 3 sq.m. (A) 5477.79
Main Data
30.00 RM Rate as above (A) 5477.79 30 RM 5477.79
30.00 RM PVC water bar 280.00 RM 8400.00
2.00 Nos. Mazdoor I Class 426.00 Nos. 852.00
LS Sundries for brushes, spatula, etc. LS 84.00
Total for 30 RM 14813.79
Rate for 1 RM (B) 493.80
Rate for 1 sq.m. 4937.93
Page 46
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
75 Providing expansion joint 12.5mm width in RCC roof slabs between
RCC twin beams using PVC water bar of 150mm wide centre bulb
of 4mm to 6mm thickness of approved quality and brand and including
filling the inner space with suitable non-absorbent flexible and well
compressible filler materials of approved quality and covering the top
surface with GI sheet 30cm wide and 1.6mm thick using phill plugs, GI
screws, limpet cup washers, bitumen washers, etc., complete complying
with standard specifications and as directed
30.00 RM Rate as per Floor Slab Expansion Joint (A) 5477.79 30 RM 5477.79
sq.m. Add for extra quantity of filler material required 141.00 sq.m. 1332.45
9.45 for filling the inner space in between twin columns
Page 47
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
d For Third floor 3117.32 154.00 3271.32
Page 48
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
77 Manufacturing, supplying and fixing Precast Reinforced Cement
Concrete slabs of following thickness in RCC 1:2:4 (one cement, two
sand and four aggregates), using following HBGS jelly excluding cost of
reinforcement steel in position but including cost of moulding charges,
casting of slab, finishing, curing and fixing in position in all floors etc.,
complete complying with standard specification and as directed.
Mould:
Country wood of size 2.20 RM
0.025 x 0.05 required = 2 x 1.10 =
2 x 0.55 1.10 RM
Total 3.30 RM
(or) 3.30 x 0.050 x 0.025 = 0.004125 (or) 0.00 cum
CC 1:2:4
1.00 x 0.45 x 0.05 = 0.02 cu.m.
DATA
0.0225 cu.m. CC 1:2:4 using 20mm HBGS Jelly 6034.60 cu.m. 135.78
1.00 use Cost of mould 41.48 1 use 41.48
LS Add for finishing, curing, lifting and placing in LS 13.58
position
2 x 0.55 1.10 RM
Total 3.30 RM
(or) 3.30 x 0.075 x 0.025 = 0.0061875 (or) 0.01 cum
CC 1:2:4
1.00 x 0.45 x 0.075 = 0.03 cu.m.
Page 49
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Sub-Data for Mould
0.0062 cu.m. Cost of country wood 34300.00 cu.m. 212.66
0.0062 cu.m. Labour wrought put up 14805.19 cu.m. 91.79
LS Sundries for nails, oiling the mould etc. LS 9.18
Cost for mould for 5 uses 313.63
Cost for 1 use 62.73
DATA
0.0338 cu.m. CC 1:2:4 using 20mm HBGS Jelly 6034.60 cu.m. 203.67
1.00 use Cost of mould 62.73 1 use 62.73
LS Add for finishing, curing, lifting and placing in LS 20.37
position
Page 50
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
78 Manufacturing, supplying and fixing in position plain cement concrete
precast pavement slab of size 450mm x 450mm of 50mm thick in
Cement Concrete 1:2:4 (One cement, Two sand and Four jelly) using
20mm HBG stone jelly including cost of moulding charges, casting of slab,
finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement
and Three Sand) to full depth of slab etc., complete complying with
standard specification and as directed
Mould:
Country wood of size 1.10 RM
0.025 x 0.05 required = 2 x 0.55 =
2 x 0.55 1.10 RM
Total 2.20 RM
(or) 2.20 x 0.050 x 0.025 = 0.00 cum
CC 1:2:4
1 x 0.45 x 0.45 x 0.05 = 0.01 cu.m.
Mould:
Country wood scantling below 4 metre long 0.01 cu.m
= 1 x 4 x 0.70 x 0.10 x 0.025
CC 1:2:4
1 x 0.60 x 0.60 x 0.10 = 0.04 cu.m.
Page 51
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
0.007 cu.m. Cost of country wood scantling 34300.00 cu.m. 240.10
0.007 cu.m. Labour wrought put up 14805.19 cu.m. 103.64
LS Sundries for nails, oiling the mould etc. LS 10.36
Cost for mould for 5 uses 114.00
Cost for 1 use 22.80
Main Data
0.036 cu.m. PCC 1:2:4 4515.90 cu.m. 162.57
1.00 use Cost of mould 22.80 use 22.80
0.36 sq.m. Pointing with CM 1:3 163.20 sq.m. 58.75
LS Sundries for conveying, fixing, etc., LS 16.26
Rate for 0.36 sq.m. 260.38
Rate for 1 sq.m. 723.30
Page 52
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Rate for 1 sq.m. 964.65
81 Supplying and fixing AC sheet roofing with 6mm thick asbestos
cement sheets of fully corrugated (grey colour) of approved quality by
drilling holes (and not by punching) with necessary ‘J’ / ‘U’ bolts and nuts
of 8mm dia of suitable length and providing one set of bitumen washers of
25mm dia and 1.60mm thick for each bolt including protruding portion of
bolts in roof shall be covered with bitumen compound etc., complete
complying with standard specification and as directed.
82 Supplying, laying and jointing G.I. Pipes of approved quality and best
variety of "B" class pipe of the following dia including labour fixing G.I.
Specials, (excluding charges for cutting and threading of pipes, cost of
such specials) to wall with necessary teak wood plugs, clamps, screws,
thread balls, shellac, etc., making holes on the walls (or) drilling holes in
roof and making good the dismantled portions to original condition with
necessray brick work / concrete and plastering wherever necessry with
necessary scaffolding charges. The pipes are to be painted with the 2
coats of good variety and approved best quality of synthetic enamel paint
over a priming coat of red oxide etc., complete in all floors complying with
standard specification. G.I. pipes shall be got approved by the Executive
Engineer before use on works.
Above ground level.
Sub-Data
Labour Charges 10 RM
0.30 Nos. Stone Cutter I Class 501.00 Each 150.30
0.75 Nos. Plumber I Class 566.00 Each 424.50
0.10 Nos. Plumber II Class 549.00 Each 54.90
0.60 Nos. Mazdoor I Class 426.00 Each 255.60
Total for 10 RM 885.30
Labour for 1 RM 88.53
Sub-Data
Sundries for 1 RM
8.33 gram Shellac 18.00 100 gms. 1.50
1.66 Nos. Clamps, plugs and screws 11.90 set 19.75
1.66 Nos. Thread Balls 3.50 Each 5.81
Sundries for 1 RM 27.06
Page 53
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Sub-Data
Painting 15mm 20mm 25mm
Painting area 0.05 0.063 0.08
161.50 sq.m. Cost of painting 7.61 10.15 12.69
Main Data
For laying GI pipe line of dia 15mm 20mm 25mm
Cost of GI Pipe per RM 69.20 97.70 126.80
Labour Charges 88.53 88.53 88.53
Sundries 27.06 27.06 27.06
Add for painting 7.61 10.15 12.69
Total per 1 RM 192.41 223.44 255.08
or say 192.45 223.45 255.10
Sub-Data
Painting 32mm 40mm
Painting area 0.10 0.126
161.50 sq.m. Cost of painting 16.24 20.30
Main Data
For laying GI pipe line of dia 32mm 40mm
Cost of GI Pipe per RM 149.90 161.60
Labour Charges 150.77 150.77
Sundries 15.45 15.45
Add for painting 16.24 20.30
Total per 1 RM 332.36 348.12
or say 332.40 348.15
Page 54
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Labour for 1 RM 199.14
Sub-Data
Sundries for 1 RM
15.00 gram Shellac 18.00 100 gms. 2.70
1.00 Nos. Clamps, plugs and screws 11.90 set 11.90
0.75 Nos. Thread Balls 3.50 Each 2.63
Sundries for 1 RM 17.23
Sub-Data
Painting 50mm 65mm
Painting area 0.16 0.204
161.50 sq.m. Cost of painting 25.38 32.99
Main Data
For laying GI pipe line of dia 50mm 65mm
Cost of GI Pipe per RM 207.00 242.00
Labour Charges 199.14 199.14
Sundries 17.23 17.23
Add for painting 25.38 32.99
Total per 1 RM 448.74 491.36
or say 448.75 491.40
Sub-Data
Labour Charges 10 RM
0.35 Nos. Stone Cutter I Class 501.00 Each 175.35
0.85 Nos. Plumber I Class 566.00 Each 481.10
0.10 Nos. Plumber II Class 549.00 Each 54.90
0.70 Nos. Mazdoor I Class 426.00 Each 298.20
0.35 Nos. Mazdoor II Class 368.00 Each 128.80
Total for 10 RM 1138.35
Labour for 1 RM 113.84
Sub-Data
Sundries for 1 RM
8.33 gram Shellac 18.00 100 gms. 1.50
1.00 Nos. Clamps, plugs and screws 11.90 set 11.90
1.11 Nos. Thread Balls 3.50 Each 3.89
Sundries for 1 RM 17.28
Main Data
For laying GI pipe line of dia 15mm 20mm 25mm
Cost of GI Pipe per RM 69.20 97.70 126.80
Labour Charges 113.84 113.84 113.84
Sundries 17.28 17.28 17.28
Add for painting 7.61 10.15 12.69
Total per 1 RM 207.93 238.97 270.61
or say 207.95 239.00 270.65
Page 55
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
B Laying pipe line of dia 32mm and 40mm
Sub-Data
Labour Charges 10 RM
0.55 Nos. Stone Cutter I Class 501.00 Each 275.55
1.30 Nos. Plumber I Class 566.00 Each 735.80
0.15 Nos. Plumber II Class 549.00 Each 82.35
1.05 Nos. Mazdoor I Class 426.00 Each 447.30
0.55 Nos. Mazdoor II Class 368.00 Each 202.40
Total for 10 RM 1743.40
Labour for 1 RM 174.34
Sub-Data
Sundries for 1 RM
10.00 gram Shellac 18.00 100 gms. 1.80
1.11 Nos. Clamps, plugs and screws 11.90 set 13.21
1.50 Nos. Thread Balls 3.50 Each 5.25
Sundries for 1 RM 20.26
Main Data
For laying GI pipe line of dia 32mm 40mm
Cost of GI Pipe per RM 149.90 161.60
Labour Charges 174.34 174.34
Sundries 20.26 20.26
Add for painting 16.24 20.30
Total per 1 RM 360.74 376.50
or say 360.75 376.55
Main Data
For laying GI pipe line of dia 50mm 65mm
Cost of GI Pipe per RM 207.00 242.00
Labour Charges 227.67 227.67
Sundries 27.55 27.55
Add for painting 25.38 32.99
Total per 1 RM 487.60 530.21
or say 487.60 530.25
Page 56
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Note: For every additional floor (not less than 3 metre height) upto 3rd floor
level, the labour component is to be increased by 30% for each floor
Sub-Data
Labour Charges 10 RM
0.85 Nos. Plumber I Class 566.00 Each 481.10
0.70 Nos. Mazdoor I Class 426.00 Each 298.20
0.35 Nos. Mazdoor II Class 368.00 Each 128.80
0.25 Nos. Painter II Class 505.00 Each 126.25
Total for 10 RM 1034.35
Labour for 1 RM 103.44
Sub-Data
Sundries for 1 RM
8.33 gram Shellac 18.00 100 gms. 1.50
0.50 Nos. Thread Balls 3.50 Each 1.75
1.20 sq.m. Gunny Tape 11.50 sq.m. 13.80
2.50 Kg. Tar 39.90 Kg. 99.75
Sundries for 1 RM 116.80
Main Data
For laying GI pipe line of dia 15mm 20mm 25mm
Cost of GI Pipe per RM 69.20 97.70 126.80
Labour Charges 103.44 103.44 103.44
Sundries 116.80 116.80 116.80
Total per 1 RM 289.43 317.93 347.03
or say 289.45 317.95 347.05
Page 57
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Labour for 1 RM 153.70
Sub-Data
Sundries for 1 RM
10.00 gram Shellac 18.00 100 gms. 1.80
1.50 Nos. Thread Balls 3.50 Each 5.25
1.80 sq.m. Gunny Tape 11.50 sq.m. 20.70
4.00 Kg. Tar 39.90 Kg. 159.60
Sundries for 1 RM 187.35
Main Data
For laying GI pipe line of dia 32mm 40mm
Cost of GI Pipe per RM 149.90 161.60
Labour Charges 153.70 153.70
Sundries 187.35 187.35
Total per 1 RM 490.95 502.65
or say 490.95 502.65
Sub-Data
Sundries for 1 RM
15.00 gram Shellac 18.00 100 gms. 2.70
2.00 Nos. Thread Balls 3.50 Each 7.00
3.00 sq.m. Gunny Tape 11.50 sq.m. 34.50
6.00 Kg. Tar 39.90 Kg. 239.40
Sundries for 1 RM 283.60
Main Data
For laying GI pipe line of dia 50mm 65mm
Cost of GI Pipe per RM 207.00 242.00
Labour Charges 201.82 201.82
Sundries 283.60 283.60
Total per 1 RM 692.42 727.42
or say 692.45 727.45
84 Supplying and fixing in position first quality and approved variety of Gun
metal Gate Valve / Wheel Valve with BIS make of the following dia
including cost of shellac, thread balls, etc., complete complying with
standard specifications (for both internal and external water supply
arrangements). The valves to be used on work shall be got approved by
the Executive Engineer before use on work.
I Gate Valve
Page 58
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
A Fixing Gun Metal Gate Valve of dia 20mm
and 25mm
Sub-Data
Labour Charges
0.25 Nos. Fitter I Class 566.00 Each 141.50
0.25 Nos. Mazdoor I Class 426.00 Each 106.50
10.00 gram Shellac 18.00 100 gms. 1.80
0.30 Nos. Thread ball 3.50 Each 1.05
Total / 1 No. 250.85
Main Data
Gun Metal Gate Valve 20mm 25mm
Cost of Gun Metal Gate Valve 341.00 577.00
Labour Charges 250.85 250.85
Total / 1 No. 591.85 827.85
or say 591.85 827.85
Sub-Data
Labour Charges
0.33 Nos. Fitter I Class 566.00 Each 186.78
0.33 Nos. Mazdoor I Class 426.00 Each 140.58
18.00 gram Shellac 18.00 100 gms. 3.24
0.70 Nos. Thread ball 3.50 Each 2.45
Total / 1 No. 333.05
Main Data
Gun Metal Gate Valve 32mm 40mm
Cost of Gun Metal Gate Valve 739.00 950.00
Labour Charges 333.05 333.05
Total / 1 No. 1072.05 1283.05
or say 1072.05 1283.05
Sub-Data
Labour Charges
0.50 Nos. Fitter I Class 566.00 Each 283.00
0.50 Nos. Mazdoor I Class 426.00 Each 213.00
30.00 gram Shellac 18.00 100 gms. 5.40
1.00 Nos. Thread ball 3.50 Each 3.50
Total / 1 No. 504.90
Main Data
Gun Metal Gate Valve 50mm 65mm
Cost of Gun Metal Gate Valve 1205.00 1480.00
Labour Charges 504.90 504.90
Total / 1 No. 1709.90 1984.90
or say 1709.90 1984.90
II Wheel Valve
Page 59
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
A Fixing Gun Metal Wheel Valve of dia 15mm,
20mm and 25mm
Sub-Data
Labour Charges
0.25 Nos. Fitter I Class 566.00 Each 141.50
0.25 Nos. Mazdoor I Class 426.00 Each 106.50
10.00 gram Shellac 18.00 100 gms. 1.80
0.30 Nos. Thread ball 3.50 Each 1.05
Total / 1 No. 250.85
Main Data
Gun Metal Wheel Valve 15mm 20mm 25mm
Cost of Gun Metal Wheel Valve 166.00 235.00 342.00
Labour Charges 250.85 250.85 250.85
Total / 1 No. 416.85 485.85 592.85
or say 416.85 485.85 592.85
Sub-Data
Labour Charges
0.33 Nos. Fitter I Class 566.00 Each 186.78
0.33 Nos. Mazdoor I Class 426.00 Each 140.58
18.00 gram Shellac 18.00 100 gms. 3.24
0.70 Nos. Thread ball 3.50 Each 2.45
Total / 1 No. 333.05
Main Data
Gun Metal Wheel Valve 32mm 40mm
Cost of Gun Metal Wheel Valve 499.00 634.00
Labour Charges 333.05 333.05
Total / 1 No. 832.05 967.05
or say 832.05 967.05
85 Supplying and fixing in position 15mm dia brass CP screw down tap /
Pillar tap (heavy duty) of approved make conforming to BIS
specifications and quality including cost of shellac, thread, etc., complete
complying with standard specification and including cutting and threading
wherever necessary. (Taps should be got approved by the Executive
Engineer before use on the works)
Sub-Data
Labour Charges
0.10 Nos. Fitter I Class 566.00 Each 56.60
0.10 Nos. Mazdoor I Class 426.00 Each 42.60
10.00 gram Shellac 18.00 100 gms. 1.80
0.25 Nos. Thread ball 3.50 Each 0.88
Total / 1 No. 101.90
Main Data
Swan Neck
SD Tap Pillar Tap
Tap
Cost of Tap 200.00 263.00 246.00
Page 60
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Labour charges 101.90 101.90 101.90
Total / 1 No. 301.90 364.90 347.90
or say 301.90 364.90 347.90
600x45omm
500x45omm
87 Supplying and fixing approved best quality brass CP towel rail 600mm
long and 20mm dia with brackets of same materials including cost of
teak wood plugs and CP screws, etc., complete complying with standard
specifications. (The tower rail should be got approved by Executive
Engineer before use on works).
1.00 Nos. Cost of aluminium anodisied towel rail 128.00 Each 128.00
0.15 Nos. Fitter I Class 566.00 Each 84.90
0.15 Nos. Mazdoor I Class 426.00 Each 63.90
6.00 Nos. Teak wood plugs 1.05 Each 6.30
6.00 Nos. Brass CP Screws (30 x 6mm) 2.35 Each 14.10
Page 61
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Total / 1 No. 297.20
or say 297.20
89 Supplying and fixing best approved best quality brass CP soap tray of
size 150 x 100mm including cost of teak wood plugs, brass screws, etc.,
complete complying with standard specifications. (The soap tray should
be got approved by Executive Engineer before use on works).
90 Supplying and fixing in position GI unions of heavy duty of approved quality and
good variety of various sizes inluding necessary cutting and threading of GI pipes
for jointing the union and providing two coats of painting with good variety and
approved quality of synthetic enamel paint over one coat of primer in case of pipe
line above ground level / one coat of tar in case of below ground level for both
internal and external water supply arrangements, etc., complete complying with
standard specifications. (The GI unions should be got approved by Executive
Engineer before use on works).
Sub-Data
Labour Charges
0.20 Nos. Fitter I Class 566.00 Each 113.20
0.20 Nos. Mazdoor I Class 426.00 Each 85.20
10.00 gram Shellac 18.00 100 gms. 1.80
0.25 Nos. Thread ball 3.50 Each 0.88
Total / 1 No. 201.10
Main Data
Dia of GI Union 15mm 20mm 25mm
Cost of GI Union 57.60 69.20 97.70
Labour Charges 201.10 201.10 201.10
Total / 1 No. 258.70 270.30 298.80
or say 258.70 270.30 298.80
Main Data
Dia of GI Union 32mm 40mm 50mm
Cost of GI Union 126.30 195.60 263.70
Labour Charges 201.10 201.10 201.10
Total / 1 No. 327.40 396.70 464.80
or say 327.40 396.70 464.80
I GI Elbow
a 50 mm dia
Page 62
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
1.00 No. Cost of Elbow 126.80 Each 126.80
1.00 No. Cutting 15.40 Each 15.40
2.00 No. Threading 31.00 Each 62.00
LS Sundries for painting / shellac LS 3.87
Total / 1 No. 208.07
or say 208.10
b 40 mm dia
1.00 No. Cost of Elbow 97.70 Each 97.70
1.00 No. Cutting 12.00 Each 12.00
2.00 No. Threading 27.90 Each 55.80
LS Sundries for painting / shellac LS 3.39
Total / 1 No. 168.89
or say 168.90
c 32 mm dia
1.00 No. Cost of Elbow 86.20 Each 86.20
1.00 No. Cutting 8.90 Each 8.90
2.00 No. Threading 24.80 Each 49.60
LS Sundries for painting / shellac LS 2.93
Total / 1 No. 147.63
or say 147.65
d 25 mm dia
1.00 No. Cost of Elbow 57.60 Each 57.60
1.00 No. Cutting 7.40 Each 7.40
2.00 No. Threading 18.40 Each 36.80
LS Sundries for painting / shellac LS 2.21
Total / 1 No. 104.01
or say 104.05
e 20 mm dia
1.00 No. Cost of Elbow 25.20 Each 25.20
1.00 No. Cutting 6.20 Each 6.20
2.00 No. Threading 8.90 Each 17.80
LS Sundries for painting / shellac LS 1.20
Total / 1 No. 50.40
or say 50.40
f 15 mm dia
1.00 No. Cost of Elbow 15.80 Each 15.80
1.00 No. Cutting 6.20 Each 6.20
2.00 No. Threading 8.70 Each 17.40
LS Sundries for painting / shellac LS 1.18
Total / 1 No. 40.58
or say 40.60
II GI Bend
a 50 mm dia
1.00 No. Cost of Bend 115.20 Each 115.20
1.00 No. Cutting 15.40 Each 15.40
2.00 No. Threading 31.00 Each 62.00
LS Sundries for painting / shellac LS 3.87
Total / 1 No. 196.47
or say 196.50
b 40 mm dia
Page 63
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
1.00 No. Cost of Bend 86.20 Each 86.20
1.00 No. Cutting 12.00 Each 12.00
2.00 No. Threading 27.90 Each 55.80
LS Sundries for painting / shellac LS 3.39
Total / 1 No. 157.39
or say 157.40
c 32 mm dia
1.00 No. Cost of Bend 69.20 Each 69.20
1.00 No. Cutting 8.90 Each 8.90
2.00 No. Threading 24.80 Each 49.60
LS Sundries for painting / shellac LS 2.93
Total / 1 No. 130.63
or say 130.65
d 25 mm dia
1.00 No. Cost of Bend 51.50 Each 51.50
1.00 No. Cutting 7.40 Each 7.40
2.00 No. Threading 18.40 Each 36.80
LS Sundries for painting / shellac LS 2.21
Total / 1 No. 97.91
or say 97.95
e 20 mm dia
1.00 No. Cost of Bend 23.00 Each 23.00
1.00 No. Cutting 6.20 Each 6.20
2.00 No. Threading 8.90 Each 17.80
LS Sundries for painting / shellac LS 1.20
Total / 1 No. 48.20
or say 48.20
f 15 mm dia
1.00 No. Cost of Bend 13.50 Each 13.50
1.00 No. Cutting 6.20 Each 6.20
2.00 No. Threading 8.70 Each 17.40
LS Sundries for painting / shellac LS 1.18
Total / 1 No. 38.28
or say 38.30
III GI Tee
a 50 mm dia
1.00 No. Cost of Tee 138.50 Each 138.50
2.00 No. Cutting 15.40 Each 30.80
3.00 No. Threading 31.00 Each 93.00
LS Sundries for painting / shellac LS 6.19
Total / 1 No. 268.49
or say 268.50
b 40 mm dia
1.00 No. Cost of Tee 109.20 Each 109.20
2.00 No. Cutting 12.00 Each 24.00
3.00 No. Threading 27.90 Each 83.70
LS Sundries for painting / shellac LS 5.39
Total / 1 No. 222.29
or say 222.30
c 32 mm dia
Page 64
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
1.00 No. Cost of Tee 97.70 Each 97.70
2.00 No. Cutting 8.90 Each 17.80
3.00 No. Threading 24.80 Each 74.40
LS Sundries for painting / shellac LS 4.61
Total / 1 No. 194.51
or say 194.55
d 25 mm dia
1.00 No. Cost of Tee 80.60 Each 80.60
2.00 No. Cutting 7.40 Each 14.80
3.00 No. Threading 18.40 Each 55.20
LS Sundries for painting / shellac LS 3.50
Total / 1 No. 154.10
or say 154.10
e 20 mm dia
1.00 No. Cost of Tee 34.40 Each 34.40
2.00 No. Cutting 6.20 Each 12.40
3.00 No. Threading 8.90 Each 26.70
LS Sundries for painting / shellac LS 1.96
Total / 1 No. 75.46
or say 75.50
f 15 mm dia
1.00 No. Cost of Tee 28.40 Each 28.40
2.00 No. Cutting 6.20 Each 12.40
3.00 No. Threading 8.70 Each 26.10
LS Sundries for painting / shellac LS 1.93
Total / 1 No. 68.83
or say 68.85
IV GI Coupling
a 50 mm dia
1.00 No. Cost of Coupling 69.20 Each 69.20
1.00 No. Cutting 15.40 Each 15.40
2.00 No. Threading 31.00 Each 62.00
LS Sundries for painting / shellac LS 3.87
Total / 1 No. 150.47
or say 150.50
b 40 mm dia
1.00 No. Cost of Coupling 57.60 Each 57.60
1.00 No. Cutting 12.00 Each 12.00
2.00 No. Threading 27.90 Each 55.80
LS Sundries for painting / shellac LS 3.39
Total / 1 No. 128.79
or say 128.80
c 32 mm dia
1.00 No. Cost of Coupling 46.10 Each 46.10
1.00 No. Cutting 8.90 Each 8.90
2.00 No. Threading 24.80 Each 49.60
LS Sundries for painting / shellac LS 2.93
Total / 1 No. 107.53
or say 107.55
d 25 mm dia
1.00 No. Cost of Coupling 28.40 Each 28.40
Page 65
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
1.00 No. Cutting 7.40 Each 7.40
2.00 No. Threading 18.40 Each 36.80
LS Sundries for painting / shellac LS 2.21
Total / 1 No. 74.81
or say 74.85
e 20 mm dia
1.00 No. Cost of Coupling 15.80 Each 15.80
1.00 No. Cutting 6.20 Each 6.20
2.00 No. Threading 8.90 Each 17.80
LS Sundries for painting / shellac LS 1.20
Total / 1 No. 41.00
or say 41.00
f 15 mm dia
1.00 No. Cost of Coupling 13.50 Each 13.50
1.00 No. Cutting 6.20 Each 6.20
2.00 No. Threading 8.70 Each 17.40
LS Sundries for painting / shellac LS 1.18
Total / 1 No. 38.28
or say 38.30
V GI Reducer
a 50 x 40 mm dia
1.00 No. Cost of Reducer 92.30 Each 92.30
1.00 No. Cutting 13.70 Each 13.70
2.00 No. Threading 29.45 Each 58.90
LS Sundries for painting / shellac LS 3.63
Total / 1 No. 168.53
or say 168.55
b 40 x 32 mm dia
1.00 No. Cost of Reducer 69.20 Each 69.20
1.00 No. Cutting 10.45 Each 10.45
2.00 No. Threading 26.35 Each 52.70
LS Sundries for painting / shellac LS 3.16
Total / 1 No. 135.51
or say 135.55
c 32 x 25 mm dia
1.00 No. Cost of Reducer 51.50 Each 51.50
1.00 No. Cutting 8.15 Each 8.15
2.00 No. Threading 21.60 Each 43.20
LS Sundries for painting / shellac LS 2.57
Total / 1 No. 105.42
or say 105.45
d 25 x 20 mm dia
1.00 No. Cost of Reducer 28.40 Each 28.40
1.00 No. Cutting 6.80 Each 6.80
2.00 No. Threading 13.65 Each 27.30
LS Sundries for painting / shellac LS 1.71
Total / 1 No. 64.21
or say 64.25
e 20 x 15 mm dia
Page 66
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
1.00 No. Cost of Reducer 20.10 Each 20.10
1.00 No. Cutting 6.20 Each 6.20
2.00 No. Threading 8.80 Each 17.60
LS Sundries for painting / shellac LS 1.19
Total / 1 No. 45.09
or say 45.10
f 40 x 25 mm dia
1.00 No. Cost of Reducer 51.50 Each 51.50
1.00 No. Cutting 9.70 Each 9.70
2.00 No. Threading 23.15 Each 46.30
LS Sundries for painting / shellac LS 2.80
Total / 1 No. 110.30
or say 110.30
g 32 x 20 mm dia
1.00 No. Cost of Reducer 40.00 Each 40.00
1.00 No. Cutting 7.55 Each 7.55
2.00 No. Threading 16.85 Each 33.70
LS Sundries for painting / shellac LS 2.06
Total / 1 No. 83.31
or say 83.35
VI GI Reducer Elbow
a 50 x 40 mm dia
1.00 No. Cost of Reducer Elbow 109.20 Each 109.20
1.00 No. Cutting 13.70 Each 13.70
2.00 No. Threading 29.45 Each 58.90
LS Sundries for painting / shellac LS 3.63
Total / 1 No. 185.43
or say 185.45
b 40 x 32 mm dia
1.00 No. Cost of Reducer Elbow 92.30 Each 92.30
1.00 No. Cutting 10.45 Each 10.45
2.00 No. Threading 26.35 Each 52.70
LS Sundries for painting / shellac LS 3.16
Total / 1 No. 158.61
or say 158.65
c 32 x 25 mm dia
1.00 No. Cost of Reducer Elbow 69.20 Each 69.20
1.00 No. Cutting 8.15 Each 8.15
2.00 No. Threading 21.60 Each 43.20
LS Sundries for painting / shellac LS 2.57
Total / 1 No. 123.12
or say 123.15
d 25 x 20 mm dia
1.00 No. Cost of Reducer Elbow 51.50 Each 51.50
1.00 No. Cutting 6.80 Each 6.80
2.00 No. Threading 13.65 Each 27.30
LS Sundries for painting / shellac LS 1.71
Total / 1 No. 87.31
or say 87.35
e 20 x 15 mm dia
Page 67
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
1.00 No. Cost of Reducer Elbow 40.00 Each 40.00
1.00 No. Cutting 6.20 Each 6.20
2.00 No. Threading 8.80 Each 17.60
LS Sundries for painting / shellac LS 1.19
Total / 1 No. 64.99
or say 65.00
f 40 x 25 mm dia
1.00 No. Cost of Reducer Elbow 72.00 Each 72.00
1.00 No. Cutting 9.70 Each 9.70
2.00 No. Threading 23.15 Each 46.30
LS Sundries for painting / shellac LS 2.80
Total / 1 No. 130.80
or say 130.80
g 32 x 20 mm dia
1.00 No. Cost of Reducer Elbow 57.10 Each 57.10
1.00 No. Cutting 7.55 Each 7.55
2.00 No. Threading 16.85 Each 33.70
LS Sundries for painting / shellac LS 2.06
Total / 1 No. 100.41
or say 100.45
VII GI Reducer Tee
a 50 x 40 mm dia
1.00 No. Cost of Reducer Tee 138.50 Each 138.50
2.00 No. Cutting 13.70 Each 27.40
3.00 No. Threading 29.45 Each 88.35
LS Sundries for painting / shellac LS 5.79
Total / 1 No. 260.04
or say 260.05
b 40 x 32 mm dia
1.00 No. Cost of Reducer Tee 115.20 Each 115.20
2.00 No. Cutting 10.45 Each 20.90
3.00 No. Threading 26.35 Each 79.05
LS Sundries for painting / shellac LS 5.00
Total / 1 No. 220.15
or say 220.15
c 32 x 25 mm dia
1.00 No. Cost of Reducer Tee 97.70 Each 97.70
2.00 No. Cutting 8.15 Each 16.30
3.00 No. Threading 21.60 Each 64.80
LS Sundries for painting / shellac LS 4.06
Total / 1 No. 182.86
or say 182.90
d 25 x 20 mm dia
1.00 No. Cost of Reducer Tee 74.60 Each 74.60
2.00 No. Cutting 6.80 Each 13.60
3.00 No. Threading 13.65 Each 40.95
LS Sundries for painting / shellac LS 2.73
Total / 1 No. 131.88
or say 131.90
Page 68
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
e 20 x 15 mm dia
1.00 No. Cost of Reducer Tee 69.20 Each 69.20
2.00 No. Cutting 6.20 Each 12.40
3.00 No. Threading 8.80 Each 26.40
LS Sundries for painting / shellac LS 1.94
Total / 1 No. 109.94
or say 109.95
f 40 x 25 mm dia
1.00 No. Cost of Reducer Tee 103.70 Each 103.70
2.00 No. Cutting 9.70 Each 19.40
3.00 No. Threading 23.15 Each 69.45
LS Sundries for painting / shellac LS 4.44
Total / 1 No. 196.99
or say 197.00
g 32 x 20 mm dia
1.00 No. Cost of Reducer Tee 80.60 Each 80.60
2.00 No. Cutting 7.55 Each 15.10
3.00 No. Threading 16.85 Each 50.55
LS Sundries for painting / shellac LS 3.28
Total / 1 No. 149.53
or say 149.55
VIII GI Hex Nipple
a 50 mm dia
1.00 No. Cost of GI Hex Nipple 86.20 Each 86.20
1.00 No. Add for painting / shellac 2.75 Each 2.75
Total / 1 No. 88.95
or say 88.95
b 40 mm dia
1.00 No. Cost of GI Hex Nipple 69.20 Each 69.20
1.00 No. Add for painting / shellac 2.75 Each 2.75
Total / 1 No. 71.95
or say 71.95
c 32 mm dia
1.00 No. Cost of GI Hex Nipple 57.60 Each 57.60
1.00 No. Add for painting / shellac 2.75 Each 2.75
Total / 1 No. 60.35
or say 60.35
d 25 mm dia
1.00 No. Cost of GI Hex Nipple 43.30 Each 43.30
1.00 No. Add for painting / shellac 2.75 Each 2.75
Total / 1 No. 46.05
or say 46.05
e 20 mm dia
1.00 No. Cost of GI Hex Nipple 34.40 Each 34.40
1.00 No. Add for painting / shellac 2.75 Each 2.75
Total / 1 No. 37.15
or say 37.15
f 15 mm dia
1.00 No. Cost of GI Hex Nipple 23.00 Each 23.00
1.00 No. Add for painting / shellac 2.75 Each 2.75
Total / 1 No. 25.75
or say 25.75
Page 69
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
92 Supplying and fixing in position best quality and approved make Indian
made white / colour glazed earthernware wash hand basin of size 550
x 400mm (with pedestal / without pedestal) with a pair of cast iron
brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class
GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve,
15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass
waste coupling including fixing of wash basin using CI brackets on to the
wall in position with TW plugs and screws, rubber washers, white lead and
giving necessary water supply connection and painting the brackets with
two coat of painting over a priming coat of anti-corrosive paint including
testing for leakages etc., complete complying with standard specification
and as directed by the departmental officers. (The wash hand basin and
specials should be got approved by the Executive Engineer before use on
works).
Set Cost of white glazed earthernware wash hand 1955.00 Set 1955.00
basin without pedestal,
One pair of cast iron brackets,
One No. 15mm dia brass CP pillar tap,
One No. 32mm dia "B" class GI waste pipe with
1.00 rubber plug and chain,
One No. 15mm dia GM wheel valve,
One No. 15mm brass nipple,
One No. 15mm dia nylone connection,
One No. 32mm dia CP brass waste coupling
Page 70
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
0.25 Nos. Thread ball 3.50 Each 0.88
Total / 1 No. 3350.98
or say 3351.00
b Without Pedestal
Set Cost of colour glazed earthernware wash hand 2405.00 Set 2405.00
basin without pedestal,
One pair of cast iron brackets,
One No. 15mm dia brass CP pillar tap,
One No. 32mm dia "B" class GI waste pipe with
1.00 rubber plug and chain,
One No. 15mm dia GM wheel valve,
One No. 15mm brass nipple,
One No. 15mm dia nylone connection,
One No. 32mm dia CP brass waste coupling
1.00 Nos. Plumber I Class 566.00 Each 566.00
0.10 Nos. Plumber II Class 549.00 Each 54.90
0.50 Nos. Mason I Class 652.00 Each 326.00
1.00 Nos. Mazdoor I Class 426.00 Each 426.00
6.00 Nos. Teak wood plugs 1.05 Each 6.30
6.00 Nos. 38mm Brass screws 2.35 Each 14.10
10.00 gram Shellac 18.00 100 gms. 1.80
0.25 Nos. Thread ball 3.50 Each 0.88
Total / 1 No. 3800.98
or say 3801.00
Page 71
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
93 Supplying and fixing in position best quality approved make white glazed
earthernwere sink of size of 600 x 450 x 200mm including cost of
32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug
and chain, 15mm dia brass nipple including fixing the sink in position and
testing for leakages etc., complete complying with standard specifications
excluding CI brackets. [The sink and specials should be got approved by
the Executive Engineer before use on works]
Page 72
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
b Cuddapah sink of 600 x 600 x 200mm
Set Cost of sink including 991.00 Set 991.00
One No. 32mm dia CP waste coupling,
1.00 One No. 32mm dia PVC waste pipe with rubber
plug and chain,
One No. 15mm dia brass nipple
1.00 Set Cost of IWC (Oriya Type) with 'P' or 'S' trap 1170.00 set 1170.00
0.60 RM 100mm dia CI pipe of 0.60m long 594.00 RM 356.40
0.45 cu.m. Sand for filling 733.96 cu.m. 330.28
0.11 cu.m. Brick jelly lime concrete 1:2:5 2595.30 cu.m. 285.48
1.00 Nos. Plumber I Class 566.00 Each 566.00
1.00 Nos. Mason I Class 652.00 Each 652.00
0.25 Nos. Plumber II class 549.00 Each 137.25
1.00 Nos. Mazdoor I Class 426.00 Each 426.00
1.00 Kg. White cement 22.00 Kg. 22.00
6.00 Kgs. Cement 5769.14 MT 34.61
400.00 gram Spun yarn 12.80 Kg 5.12
Total / 1 No. 3985.15
or say 3986.00
Page 73
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
96 Supplying and fixing in positon Indian Water Closet (Oriya type) of
size 580 x 440mm colour glazed earthern ware of approved quality
and brand with "P" or "S" trap conforming to BIS with sand cushion and
forming flooring alround the closet using 40mm broken brick jelly in lime
concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and
finishing the top to the required slope and including giving necessary
connection to CI soil pipes (including the cost of 100mm dia CI pipe
for a length of 600mm) by dismantling brick masonry wall / reinforced
cement concrete roof / floor slab and making good the dismantled portion
to the original condition with leakages etc., complete complying with
standard specifications and as directed by the departmental officers. (The
water closet should be got approved by the Executive Engineer before use
on works).
1.00 Set Cost of IWC (Oriya Type) with 'P' or 'S' trap 1490.00 set 1490.00
0.60 RM 100mm dia CI pipe of 0.60m long 594.00 RM 356.40
0.45 cu.m. Sand for filling 733.96 cu.m. 330.28
0.11 cu.m. Brick jelly lime concrete 1:2:5 2595.30 cu.m. 285.48
1.00 Nos. Plumber I Class 566.00 Each 566.00
1.00 Nos. Mason I Class 652.00 Each 652.00
0.25 Nos. Plumber II class 549.00 Each 137.25
1.00 Nos. Mazdoor I Class 426.00 Each 426.00
1.00 Kg. White cement 22.00 Kg. 22.00
6.00 Kgs. Cement 5769.14 MT 34.61
400.00 gram Spun yarn 12.80 Kg 5.12
Total / 1 No. 4305.15
or say 4306.00
1.00 Set Cost of IWC (Oriya Type) with 'P' or 'S' trap 1170.00 set 1170.00
0.60 RM 110mm dia PVC pipe of 0.60m long 259.30 RM 155.58
0.45 cu.m. Sand for filling 733.96 cu.m. 330.28
0.11 cu.m. Brick jelly lime concrete 1:2:5 2595.30 cu.m. 285.48
1.00 Nos. Plumber I Class 566.00 Each 566.00
1.00 Nos. Mason I Class 652.00 Each 652.00
0.25 Nos. Plumber II class 549.00 Each 137.25
1.00 Nos. Mazdoor I Class 426.00 Each 426.00
1.00 Kg. White cement 22.00 Kg. 22.00
6.00 Kgs. Cement 5769.14 MT 34.61
400.00 gram Spun yarn 12.80 Kg 5.12
Total / 1 No. 3784.33
or say 3785.00
Page 74
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
98 Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580
x 440mm colour glazed earthern ware of approved quality and brand with "P"
or "S" trap conforming to BIS with sand cushion and forming flooring alround the
closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand
and Five brick jelly) 100mm thick and finishing the top to the required slope and
including giving necessary connection to PVC pipes (including the cost of
110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry
wall / reinforced cement concrete roof / floor slab and making good the
dismantled portion to the original condition with leakages etc., complete
complying with standard specifications and as directed by the departmental
officers. (The water closet should be got approved by the Executive Engineer
before use on works).
1.00 Set Cost of IWC (Oriya Type) with 'P' or 'S' trap 1490.00 set 1490.00
0.60 RM 110mm dia PVC pipe of 0.60m long 259.30 RM 155.58
0.45 cu.m. Sand for filling 733.96 cu.m. 330.28
0.11 cu.m. Brick jelly lime concrete 1:2:5 2595.30 cu.m. 285.48
1.00 Nos. Plumber I Class 566.00 Each 566.00
1.00 Nos. Mason I Class 652.00 Each 652.00
0.25 Nos. Plumber II class 549.00 Each 137.25
1.00 Nos. Mazdoor I Class 426.00 Each 426.00
1.00 Kg. White cement 22.00 Kg. 22.00
6.00 Kgs. Cement 5769.14 MT 34.61
400.00 gram Spun yarn 12.80 Kg 5.12
Total / 1 No. 4104.33
or say 4105.00
99 Supplying and fixing in position white / colour glazed European Water Closet
of best quality and approved make with 100 mm "P" or "S" trap connecting with
CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black
seat and seat cover with CP brass hinges including cost of white cement, cement
for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying
and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing
tank with a pair of CI brackets, etc., complete with all fittings such as 15mm
brass ball valve with polythene float with brass handle, union, coupling connected
by means of 40mm white PVC flush hand using Indian adopter joint including all
internal fittings.....
such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2
Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary
connection to the PVC pipe including cost of 600mm length of 110mm dia PVC
pipe and painting the CI brackets with 2 coats of approved paint over one coat of
red oxide primer, dismantling the masonry and re-doing the dismantled masonry
to original condition etc. complete complying with standard specifications. (The
EWC and flushing tank wiht all accessories should be got approved by the
Executive Enginer before use on works)
Sub-Data
Set Cost of white glazed European Water Closet with 10 3000.00 Nos. 3000.00
1.00 litres capacity PVC flushing tank with all accessories
Page 75
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Page 76
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
e White glazed European Water Closet with 12.5
litre capacity porcelin flushing tank fixed on to
wall
Sub-Data
Fixing charges for porcelin flushing tank
0.50 Nos. Plumber I class 566.00 Each 283.00
0.50 Nos. Mason II Class 609.00 Each 304.50
1.00 Nos. Mazdoor I Class 426.00 Each 426.00
2.00 Nos. TW plugs 5.25 Each 10.50
2.00 Nos. Brass screws 4.75 Each 9.50
2.00 Kg. White cement 22.00 Kg. 44.00
10.00 gram Shellac 18.00 100 gms. 1.80
0.50 Nos. Thread ball 3.50 Each 1.75
200.00 gram Spun yarn 12.80 kg 2.56
Total / 1 No. 1083.61
or say (F) 1084.00
Page 77
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
100 Supply and fixing in position of best Indian make white / colour glazed
earthernware lipped mouth flat back urinal of best quality and approved
make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell
mouth PVC connection and waste pipe, 15mm dia GI pipe of required
length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and
fixing the urinals in position with necessary TW plugs, clamps, screws,
etc., including dismantling masnory and re-doing the same to the original
condition, etc., including painting the pipe with two coats of best quality
approved synthetic enamel paint over one coat of red oxide primer and
checked without any leakage etc. complete complying with standard
specifications and as directed by the departmental officers. (The urinal
should be got approved by the Executive Engineer before use on works.)
Page 78
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
102 Supplying and fixing position CI Nahani Trap / Floor Trap of the
following sizes with best stainless steel gratings of approved brand and
quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of
lime, two part of sand and five part of 40mm gauge brick jelly) and
finished with Cement Mortar 1:3 (One Cement, Three sand) including
dismantling masonry works wherever found necessary and making good
the dismantled portions to the original condition and giving connection to
the CI / PVC pipes, etc., complete complying with standard specification.
(The Nahani Trap should be got approved by the Executive Engineer
before use on works)
1.00 set Cost of Nahini Trap with stainless steel grating 131.40 Each 131.40
0.15 Nos. Plumber I Class 566.00 Each 84.90
0.15 Nos. Stone Cutter I Class 501.00 Each 75.15
0.15 Nos. Mason II Class 609.00 Each 91.35
0.005 cu.m Brick jelly lime concrete 1:2:5 using 40mm size 2595.30 cu.m 12.98
0.002 cu.m brick
Cementjelly
mortar 1:3 3578.85 cu.m 7.16
Total / 1 No. 402.93
or say (A) 403.00
Page 79
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
103 Supplying, laying and jointing glazed stone ware pipes of the following
dia of approved quality with spigot and socket ends and fixing them in dry
condition using spun yarn and cement including petty masonry shoring
and strutting wherever found necessary and laying the pipe line in the
alignment at the specified gradient and testing with necessary tools and
plants, etc., and re-filling the trench with excavated earth and levelling
the ground etc., complete complying with standard specifications. (Earth
work excavation, re-filling with excavated earth will be measured and paid
separately).
104 Supplying, laying and jointing glazed stoneware pipes of following dia
of approved best quality with spigot and socket ends (in reverse direction)
in dry condition and laid in loose joints (i.e.) without cement and spun
yarn, so that the waste water can be drained to the trenches already
available, excluding cost of earth work excavation, cost of re-filling with
sand / earth, but including laying the pipe in true alignment and gradient
and conducting required water supply test for draining with necessary
tools and plants, etc., complete complying with standard specifications.
Sub-Data
Labour for laying for 30m length (loose
joint)
1.00 Nos. Plumber II Class 549.00 Each 549.00
3.00 Nos. Mazdoor I Class 426.00 Each 1278.00
1.00 Nos. Mazdoor II Class 368.00 Each 368.00
Total for 30 RM 2195.00
Rate / 1 RM 73.17
Main Data
100 mm 150 mm
1.00 RM Cost of pipes (each of length 0.60 metre) 102.67 165.33
Labour Charges 73.17 73.17
Rate for 1 RM 175.83 238.50
or say 175.85 238.50
Page 80
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
105 Supplying and fixing in position 150mm dia stoneware tee of approved
best quality and provding leak proof joints with cement, spun yarn, etc.,
including dismantling the brick work and re-doing the dismantled portion
to the original condition, etc., complete complying with standard
specifications (The stoneware tee shall be got approved by the Executive
Engineer before use on work)
106 Supplying and fixing in position 150 x 100mm "P" or "S" stoneware gully
trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x
230mm at bottom and top respectively with necessary earth work
excavation laid over a bed of brick jelly cement concrete 1:3:6 (One
cement, Three sand and Six broken brick jelly) 150mm thick using 40mm
size broken brick jelly including necessary brick work and plastering
including dismantling masonry wherever necessary and re-doing the
damaged portions to the original conditions using cement concrete 1:3:6
using 20mm stone jelly for fixing the gully trap and giving connections to
stoneware sewer line etc., complete complying with standard
specifications. [Earth work excavation, brick work, plastering shall be
measured and paid separately]. The stoneware gully trap should be got
approved by the Executive Engineer before use on works.
Main Data
1.00 No. Cost of Gully Trap with CI double gratings 165.50 Each 165.50
0.25 Nos. Mason I Class 652.00 Each 163.00
0.25 Nos. Mazdoor I Class 426.00 Each 106.50
0.03 cu.m CC 1:3:6 using 20mm stone jelly 4418.00 cu.m 132.54
0.05 cu.m Brick jelly cement concrete 1:3:6 using 40mm 3642.85 cu.m 182.14
brick jelly Total / 1 No. 749.68
or say (A) 750.00
Sub-Data brick jelly cement concrete 1:3:6
9.00 cu.m. Brick jelly 40mm thick 722.00 cu.m. 6498.00
4.50 cu.m. Cement Mortar 1:3 3578.85 cu.m. 16104.81
1.80 Nos. Mason II Class 609.00 Each 1096.20
17.70 Nos. Mazdoor I Class 426.00 Each 7540.20
14.10 Nos. Mazdoor II Class 368.00 Each 5188.80
Rate for 10 cu.m. 36428.01
Rate for 1 cu.m. 3642.85
Page 81
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
107 Supplying and fixing AC ventilating shaft of 100mm dia with 3 metre
height including cost of 100mm dia AC cylindrical cowl of best approved
quality etc., complete complying with standard specifications and as
directed by the departmental officers
108 Supplying and fixing PVC ventilating shaft of 110mm dia (having
working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC
cylindrical cowl of best approved quality etc., complete complying with
standard specifications and as directed by the departmental officers
109 Supplying and fixing in position CI manhole covers with CI frames (Heavy
duty) of size 60cm x 60cm of best approved quality as per standard
specification etc., complete compying with standard specifications
Sub-Data
Labour for fixing 3 Nos. of CI Manhole Cover
1.00 Nos. Mason I Class 652.00 Each 652.00
1.00 Nos. Mazdoor I Class 426.00 Each 426.00
Total for fixing 3 Nos. 1078.00
For fixing 1 No. 359.33
Main Data
1.00 Nos. Cost of CI Manhole Cover (Heavy Duty) 1810.00 Each 1810.00
1.00 Nos. Labour charges 359.33 Each 359.33
0.004 cu.m Cement Mortar 1:3 3578.85 cu.m 14.32
Rate per 1 No. 2183.65
or say 2184.00
Page 82
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
110 Supplying, laying and position best quality Indian cast iron soil / waste
pipes of following dia of approved brand and quality conforming to BIS
and providing leak proof joints with spun yarn and making connection to
all sanitary fittings with required number of special, clamps, cement and
spun yarn, dismantling the masonry / RCC wherever necessary and
making good the dismanlted portion to the original condition including
painting the cast iron pipes and fittings with two coats of anti corrosive
paint of approved quality and colour and the pipes fixed in postion in true
alignment, etc., complete complying with standard specifications (The CI
pipes shall be got approved by the Executive Engineer before use on
work)
Sub-Data
Labour for laying CI pipe line for 1.83 metre
long
0.50 Nos. Plumber I Class 566.00 Each 283.00
0.25 Nos. Stone Cutter II Class 483.00 Each 120.75
1.00 Nos. Mazdoor I Class 426.00 Each 426.00
Total for 1.83 RM 829.75
Rate / 1 RM 453.42
Main Data
150 mm 100mm 75mm
1.00 RM Cost of pipes (each of length 1.83 metre) 985.00 594.00 474.00
Labour Charges 453.42 453.42 453.42
2.00 Nos. Special clamp 21.00 21.00 21.00
1.00 Kg. Cement 5.77 5.77 5.77
250.00 grams Spun yarn 3.20 3.20 3.20
Two coats of anti corrosive paint 50.20 33.47 25.10
Rate for 1 RM 1518.58 1110.85 982.48
or say 1518.60 1110.90 982.50
Sub-Data
Labour for fixing CI specials 4 Nos.
Page 83
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
1.00 Nos. Plumber I class 566.00 Each 566.00
1.00 No. Mazdor I class 426.00 Each 426.00
0.80 Nos. Plumber II Class 549.00 Each 439.20
Total for fixing 4 Nos. 1431.20
Rate for 1 No. 357.80
Page 84
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Sub-Data
Labour for fixing CI Cowl
0.25 Nos. Plumber I class 566.00 Each 141.50
1.00 Kg. Cement 5769.14 MT 5.77
125.00 gram Spun yarn 12.80 Kg. 1.60
LS Add for anti-corrosive painting LS 1.50
Rate for 1 No. 150.37
112 Supplying and fixing in position best quality PVC soil / waste pipes of
various dia having 6 kg / sq.cm. pressure BIS mark and providing leak
proof joints using PVC adhesives including fixing to the wall with special
PVC / MS clamp, teak wood plugs, brass screws, etc., and making
connection to all sanitary fittings, dismantling masonry / RCC works
wherever found necessary and making the good dismantled portion to the
original condition, including testing for any leakages, etc., complete
complying with standard specifications. (The PVC pipes should be got
approved by the Executive Engineer before use on works). The rate for
earth work excavation will be measured and paid separately in the cases
where the pipe lines are proposed to laid below ground level
Sub-Data
Labour for 6.10 RM (one length)
0.40 Nos. Plumber I Class 566.00 Each 226.40
0.25 Nos. Stone Cutter II Class 483.00 Each 120.75
0.75 Nos. Mazdoor I Class 426.00 Each 319.50
6.00 set PVC / MS special clamp, TW plugs and screws 11.90 set 71.40
20.00 gram PVC adhesive 32.10 100 gram 6.42
Total for 6.10 RM (one length) 744.47
Rate for 1 RM 122.04
Main Data
Dia of pipe 75mm 110mm 160mm
Cost of PVC pipe per RM 166.30 259.30 506.00
Labour charges 122.04 122.04 122.04
Total / 1 RM 288.34 381.34 628.04
or say 288.35 381.35 628.05
113 Supplying and fixing in position PVC specials of the following dia and types
of approved quality confirming to BIS and providing leak proof joints
including fixing to the walls and giving connection to the PVC soil stacks,
dismantling the masonry or RCC works and re-doing the dismantled
portion to original condition etc., complete complying with standard
specifications. (The PVC specials should be got approved by the Executive
Engineer before use on works).
Sub-Data
Labour for fixing 4 Nos.
Page 85
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
0.60 Nos. Plumber I Class 566.00 Each 339.60
0.60 Nos. Mazdoor I Class 426.00 Each 255.60
0.50 Nos. Plumber II Class 549.00 Each 274.50
Total for fixing 4 Nos. 869.70
Rate for 1 No. 217.43
Page 86
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
114 Supplying and fixing in position PVC 4 way junction plain or with door of
various dia of best approved quality confirming to BIS and providing leak
proof joints including fixing to the walls and giving connection to the PVC
soil stacks, dismantling the masonry or RCC works and re-doing the
dismantled portion to original condition etc., complete complying with
standard specifications. (The PVC specials should be got approved by the
Executive Engineer before use on works).
Sub-Data
Labour for fixing 2 Nos.
0.60 Nos. Plumber I Class 566.00 Each 339.60
0.60 Nos. Mazdoor I Class 426.00 Each 255.60
0.25 Nos. Plumber II Class 549.00 Each 137.25
Total for fixing 2 Nos. 732.45
Rate for 1 No. 366.23
Main Data
Page 87
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
B PVC Double "Y" with Single Door 160mm 110mm 75mm
(4 way junction)
115 Supplying and fixing in position PVC cowls of following dia of best
approved quality conforming to BIS, etc., complete complying with
standard specifications. (The PVC cowl should be got approved by the
Executive Engineer before use on works).
Sub-Data
Labour Charges PVC Cowl
0.20 Nos. Plumber I Class 566.00 Each 113.20
20.00 gram PVC adhesive 32.10 100 gram. 6.42
Total for 1 No. 119.62
Main Data
PVC Cowl 110mm 75mm 50mm
1.00 Nos. Cost of cowl 70.00 47.30 29.30
1.00 Nos. Labour charges 119.62 119.62 119.62
Total / 1 No. 189.65 166.95 148.95
or say 189.65 166.95 148.95
116 Supplying and fixing in position CP shower rose with CP stop cock
arrangement of size 15mm dia inlet and 100mm outlet to the pipe line
with necessary cutting, threading and jointing using shellac etc., complete
complying with standard specification and as directed by the departmental
officers (The CP shower rose should be got approved by the Executive
Engineer before use on works).
Page 88
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Internal Water Supply Arrangements using
PVC pipes and PVC specials
117 Supplying, laying and jointing PVC pipes (having working pressure 10
kg. / sq.cm) of approved quality and best variety conforming to BIS of the
following dia including cutting, threading and fixing PVC specials using PVC
adhesives (but excluding cost of such specials) and fixing into wall with
teak wood plugs, PVC clamps and screws making holes on the wall (or)
drilling holes in the roof and making good the dismantled portion to
original condition with necessary brick work / cement concrete and
plastering neatly wherever necessary with necessary scaffolding charges,
etc., complete complying with standard specifications. The PVC pipes
shall be got approved by Executive Engineer before use on works.
Sub-Data
Labour for 10 RM
0.30 Nos. Stone Cutter I Class 501.00 Each 150.30
0.45 Nos. Plumber I Class 566.00 Each 254.70
0.10 Nos. Plumber II Class 549.00 Each 54.90
0.40 Nos. Mazdoor I Class 426.00 Each 170.40
0.30 Nos. Mazdoor II Class 368.00 Each 110.40
Total for 10 RM 740.70
Total for 1 RM 74.07
Sundries for 1 RM
8.33 gram PVC adhesive 32.10 100 gram. 2.67
1.66 Set PVC clamps, TW plugs and screws 8.30 Set 13.78
Total for 1 RM 16.45
Main Data
For laying PVC pipe line of dia 15mm 20mm 25mm
Cost of PVC pipe per RM 14.60 91.70 133.20
Labour Charges 74.07 74.07 74.07
Sundries 16.45 16.45 16.45
Total per 1 RM 105.12 182.22 223.72
or say 105.15 182.25 223.75
B For laying PVC pipes of dia 32mm & 40mm
Sub-Data
Labour for 10 RM
0.45 Nos. Stone Cutter I Class 501.00 Each 225.45
0.70 Nos. Plumber I Class 566.00 Each 396.20
0.15 Nos. Plumber II Class 549.00 Each 82.35
0.60 Nos. Mazdoor I Class 426.00 Each 255.60
0.45 Nos. Mazdoor II Class 368.00 Each 165.60
Total for 10 RM 1125.20
Total for 1 RM 112.52
Sundries for 1 RM
10.00 gram PVC adhesive 32.10 100 gram. 3.21
1.00 Set PVC clamps, TW plugs and screws 8.30 Set 8.30
Total for 1 RM 11.51
Page 89
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Main Data
For laying PVC pipe line of dia 32mm 40mm
Cost of PVC pipe per RM 55.10 86.30
Labour Charges 112.52 112.52
Sundries 11.51 11.51
Total per 1 RM 179.13 210.33
or say 179.15 210.35
Sub-Data
Labour for 10 RM
0.60 Nos. Stone Cutter I Class 501.00 Each 300.60
0.90 Nos. Plumber I Class 566.00 Each 509.40
0.20 Nos. Plumber II Class 549.00 Each 109.80
0.75 Nos. Mazdoor I Class 426.00 Each 319.50
0.60 Nos. Mazdoor II Class 368.00 Each 220.80
Total for 10 RM 1460.10
Total for 1 RM 146.01
Sundries for 1 RM
15.00 gram PVC adhesive 32.10 100 gram. 4.82
1.00 Set PVC clamps, TW plugs and screws 8.30 Set 8.30
Total for 1 RM 13.12
Main Data
For laying PVC pipe line of dia 50mm
Cost of PVC pipe per RM 129.00
Labour Charges 146.01
Sundries 13.12
Total per 1 RM 288.13
or say 288.15
Sub-Data
Labour for 10 RM
Page 90
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
0.35 Nos. Stone Cutter I Class 501.00 Each 175.35
0.55 Nos. Plumber I Class 566.00 Each 311.30
0.10 Nos. Plumber II Class 549.00 Each 54.90
0.45 Nos. Mazdoor I Class 426.00 Each 191.70
0.35 Nos. Mazdoor II Class 368.00 Each 128.80
Total for 10 RM 862.05
Total for 1 RM 86.21
Sundries for 1 RM
8.33 gram PVC adhesive 32.10 100 gram. 2.67
1.11 Set PVC clamps, TW plugs and screws 8.30 Set 9.21
Total for 1 RM 11.89
Main Data
For laying PVC pipe line of dia 15mm 20mm 25mm
Cost of PVC pipe per RM 14.60 91.70 133.20
Labour Charges 86.21 86.21 86.21
Sundries 11.89 11.89 11.89
Total per 1 RM 112.69 189.79 231.29
or say 112.70 189.80 231.30
Main Data
For laying PVC pipe line of dia 32mm 40mm
Cost of PVC pipe per RM 202.00 86.30
Labour Charges 129.00 129.00
Sundries 11.51 11.51
Total per 1 RM 342.51 226.81
or say 342.55 226.85
Page 91
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Sundries for 1 RM
15.00 gram PVC adhesive 32.10 100 gram. 4.82
1.50 Set PVC clamps, TW plugs and screws 8.30 Set 12.45
Total for 1 RM 17.27
Main Data
For laying PVC pipe line of dia 50mm
Cost of PVC pipe per RM 129.00
Labour Charges 167.45
Sundries 17.27
Total per 1 RM 313.72
or say 313.75
II Below Ground Level
A For laying PVC pipes of dia 15mm, 20mm
and 25mm
Sub-Data
Labour for 10 RM
0.55 Nos. Plumber I Class 566.00 Each 311.30
0.45 Nos. Mazdoor I Class 426.00 Each 191.70
0.35 Nos. Mazdoor II Class 368.00 Each 128.80
Total for 10 RM 631.80
Total for 1 RM 63.18
Sundries for 1 RM
8.33 gram PVC adhesive 32.10 100 gram. 2.67
Total for 1 RM 2.67
Main Data
For laying PVC pipe line of dia 15mm 20mm 25mm
Cost of PVC pipe per RM 14.60 91.70 133.20
Labour Charges 63.18 63.18 63.18
Sundries 2.67 2.67 2.67
Total per 1 RM 80.45 157.55 199.05
or say 80.50 157.60 199.10
Sundries for 1 RM
10.00 gram PVC adhesive 32.10 100 gram. 3.21
Total for 1 RM 3.21
Main Data
For laying PVC pipe line of dia 32mm 40mm
Cost of PVC pipe per RM 202.00 113.80
Labour Charges 93.21 93.21
Sundries 3.21 3.21
Total per 1 RM 298.42 210.22
or say 298.45 210.25
Page 92
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Sub-Data
Labour for 10 RM
1.05 Nos. Plumber I Class 566.00 Each 594.30
0.85 Nos. Mazdoor I Class 426.00 Each 362.10
0.70 Nos. Mazdoor II Class 368.00 Each 257.60
Total for 10 RM 1214.00
Total for 1 RM 121.40
Sundries for 1 RM
15.00 gram PVC adhesive 32.10 100 gram. 4.82
Total for 1 RM 4.82
Main Data
For laying PVC pipe line of dia 50mm
Cost of PVC pipe per RM 129.00
Labour Charges 121.40
Sundries 4.82
Total per 1 RM 255.22
or say 255.25
119 Supplying PVC Specials (with working pressure 10 kg. / sq.cm.) in water
supply arrangements (both in internal and external water supply
arrangements
Note: Since the labour for cutting, threading / pasting, sundries have already
been included under pipe line item of works, no separate provision for
fixing PVC specials needs to be allowed
A Coupler
a 1.00 No. 15 mm Dia 3.50 Each 3.50
b 1.00 No. 20 mm Dia 4.10 Each 4.10
c 1.00 No. 25 mm Dia 4.80 Each 4.80
d 1.00 No. 32 mm Dia 6.00 Each 6.00
e 1.00 No. 40 mm Dia 9.00 Each 9.00
f 1.00 No. 50 mm Dia 12.20 Each 12.20
B Elbow
a 1.00 No. 15 mm Dia 5.30 Each 5.30
b 1.00 No. 20 mm Dia 6.00 Each 6.00
c 1.00 No. 25 mm Dia 8.50 Each 8.50
d 1.00 No. 32 mm Dia 12.20 Each 12.20
e 1.00 No. 40 mm Dia 17.20 Each 17.20
f 1.00 No. 50 mm Dia 24.50 Each 24.50
C BEND
a 1.00 No. 15 mm Dia 6.00 Each 6.00
b 1.00 No. 20 mm Dia 7.30 Each 7.30
c 1.00 No. 25 mm Dia 9.70 Each 9.70
d 1.00 No. 32 mm Dia 14.60 Each 14.60
e 1.00 No. 40 mm Dia 19.60 Each 19.60
f 1.00 No. 50 mm Dia 30.70 Each 30.70
Page 93
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
D Tee
a 1.00 No. 15 mm Dia 7.30 Each 7.30
b 1.00 No. 20 mm Dia 8.50 Each 8.50
c 1.00 No. 25 mm Dia 12.20 Each 12.20
d 1.00 No. 32 mm Dia 14.70 Each 14.70
e 1.00 No. 40 mm Dia 23.40 Each 23.40
f 1.00 No. 50 mm Dia 36.80 Each 36.80
E End Cap
a 1.00 No. 15 mm Dia 3.50 Each 3.50
b 1.00 No. 20 mm Dia 4.80 Each 4.80
c 1.00 No. 25 mm Dia 6.00 Each 6.00
d 1.00 No. 32 mm Dia 7.30 Each 7.30
e 1.00 No. 40 mm Dia 11.40 Each 11.40
f 1.00 No. 50 mm Dia 15.80 Each 15.80
F Reducer
a 1.00 No. 20 mm x 15 mm 4.80 Each 4.80
b 1.00 No. 25 mm x 20 mm 5.30 Each 5.30
c 1.00 No. 32 mm x 25 mm 8.50 Each 8.50
d 1.00 No. 40 mm x 32 mm 11.40 Each 11.40
e 1.00 No. 50 mm x 40 mm 19.60 Each 19.60
G Reducer Tee
a 1.00 No. 20 mm x 15 mm 7.30 Each 7.30
b 1.00 No. 25 mm x 20 mm 8.50 Each 8.50
c 1.00 No. 32 mm x 25 mm 12.20 Each 12.20
d 1.00 No. 40 mm x 32 mm 14.70 Each 14.70
e 1.00 No. 50 mm x 40 mm 24.50 Each 24.50
H Reducer Elbow
a 1.00 No. 20 mm x 15 mm 6.00 Each 6.00
b 1.00 No. 25 mm x 20 mm 7.30 Each 7.30
c 1.00 No. 32 mm x 25 mm 9.70 Each 9.70
d 1.00 No. 40 mm x 32 mm 12.20 Each 12.20
e 1.00 No. 50 mm x 40 mm 18.30 Each 18.30
J Jet Nipple
a 1.00 No. 25 mm Dia 15.80 Each 15.80
b 1.00 No. 32 mm Dia 20.70 Each 20.70
120 Providing Anti-termite treatment to soil adjecent and under building 95.00
foundation, plinth periphery of the building by application of chemicals of IS
63613 part I to IV in stages to suit the progress of work consist as per the
detailed specification as below. Including breaking of termite mounds, making
holes with crow bar, closing the holes after the treatment and including cost of
chemicals, labour charges, transport and storing etc., complete and as directed by
the departmental officers.
121 supplying and fixing of Hallow pressed steel door frames for single leaf and double leaved door using
pressed steel frame of size 105x60mm using mild sheet of 1.25mm thick (18gauge) special profile
extruded section.The pressed steel frame should be as per IS4351/1976.The rate in inclusive of bottom
thehold fasts and provision to aldrip tower bolt hinges and lock plate etc,with one coat of zinc chnomate
yellow primer and filling the inside hallow portion with cement concrete 1:2:4 using 20mm HBG stone jelly
etc,complete complying with standard specification.
Page 94
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
1.00 Rm Labour steel frame 892.00 cu.m 892.00
0.0063 cu.m PCC 1:2:4 4515.90 cu.m 28.45
920.45
Rate for 1 Rm 920.50
122 R.R Masonary in cement mortar1:5(one cement,and five sand) for foundation and basement including
simultaneously pointing above ground level with the same mortar etc.,complete
10.00 m3 Rough stone for masonary 652.28 cu.m 6522.80
1.00 m3 Bond stone 843.28 cu.m 843.28
3.40 m3 Cement Mortar 1:5 2471.17 cu.m 8401.99
7.10 nos Mason I class 652.00 nos 4629.20
10.60 nos Mason II class 609.00 nos 6455.40
14.10 nos Mazdoor I class 426.00 nos 6006.60
14.10 nos Mazdoor II class 368.00 nos 5188.80
Rate as per 10m2 38048.07
Rate as per 1m2 3804.80
123 Brick work in following Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for
foundation and basement including curing etc.,complete complying with standard specification.
In Cement Mortar 1:3
1300.00 nos Fly ash bricks of size 23x11x7cm 6334.64 1000No 8235.03
0.708 m3 Cement Mortar 1:3 3578.85 cu.m 2533.82
1.00 nos Mason I class 652.00 nos 652.00
3.00 nos Mason II class 609.00 nos 1827.00
2.00 nos Mazdoor I class 426.00 nos 852.00
6.00 nos Mazdoor II class 368.00 nos 2208.00
Total for 100 cft (or) 2.83168 cu.m 16307.86
Rate for 1 cu.m 5759.10
Rate for 1 cu.m:.
For foundation and basfement 5759.10 5759.10
In ground floor 5759.10 51.50 5810.60
In first floor 5810.60 103.80 5914.40
In second floor 5914.40 103.80 6018.20
In Third floor 6018.20 103.80 6122.00
In fourth floor 6122.00 103.80 6225.80
In fifth floor 6225.80 103.80 6329.60
Page 95
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
2.00 nos Mazdoor I class 426.00 nos 852.00
6.00 nos Mazdoor II class 368.00 nos 2208.00
Total for 100 cft (or) 2.83168 cu.m 15327.56
Rate for 1 cu.m 5412.90
Rate for 1 cu.m:.
For foundation and basfement 5412.90 5412.90
In ground floor 5412.90 51.50 5464.40
In first floor 5464.40 103.80 5568.20
In second floor 5568.20 103.80 5672.00
In Third floor 5672.00 103.80 5775.80
In fourth floor 5775.80 103.80 5879.60
In fifth floor 5879.60 103.80 5983.40
32 Brick partition walls of 11.50cm thickness using best quality Fly Ash
Bricks of size 23 x 11 x 7 cm in Cement Mortar 1:3 (One Cement and
Three Sand) using hoop iron reinforcement if found necessary including
curing etc. complete and as directed by the departmental officers. (Hoop
iron reinforcement will be measured and paid for separately)
c First Floor
1.15 cu.m. Brick Work in C.M.1:3 in First Floor 5914.40 cu.m. 6801.56
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7453.56
Rate for 1 sq.m. 745.40
d Second Floor
1.15 cu.m. Brick Work in C.M.1:3 in Second Floor 6018.20 cu.m. 6920.93
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7572.93
Rate for 1 sq.m. 757.30
e Third Floor
1.15 cu.m. Brick Work in C.M.1:3 in Third Floor 6122.00 cu.m. 7040.30
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7692.30
Rate for 1 sq.m. 769.25
f Fourth Floor
1.15 cu.m. Brick Work in C.M.1:3 in Fourth Floor 6225.80 cu.m. 7159.67
1.00 No. Extra Mason I Class 652.00 Each 652.00
Total for 10 sq.m. 7811.67
Rate for 1 sq.m. 781.20
124 Supplying and Fixing MS Ladder width 45cm using 50x50x6mm MS Angle.
Page 96
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
4.00x3.48 Kg/m 13.92
40.44 kg
Primer area
50x50x6mm Angle = 6x0.20 1.20
0.64
1.84 sq.m
Main Data
40.44 kg Cost of M.S.Angle (quotation rate) 41.20 kg 1666.13
40.44 kg Labour chargess 33.40 kg 1350.70
1.84 sq.m Priming one coat 54.50 sq.m 100.28
L.S Conveyance 2.79
Rate for 3 RM 3119.89
Rate for 1 RM 1039.96
Say 1040.00
125
Providing two legged scaffolding using 15cm diameter blue-gum posts or casuarina posts or best quality
bamboo posts of 4m over all length (3m+0.5m projection+0.5m into the ground) the distance between
the two rows being 1.25m and the spacing of posts being 2m in both the rows with two horizontal posts
with 0.5m overlap on either side and braces at2m c/c including longitudinal and transverse middle braces
to step up and providing a platform with country wood planks of 40mm thick and 1m width etc.,in a
complete form using coir and nails 1m run.
Detailed data
Cost of materials for one operation 1413.00
2.00 nos Mazdoor I class 426.00 Each 852.00
LS Coir, nails etc., 70.65
Total for 6 run.m 2335.65
Rate for 1 run.m 389.30
Page 97
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Cement mortar & dismantling and redoing the
L.S same L.S 19.40
L.S Nozing edges and polishing L.S 46.75
Rate for 0.74 sq.m 1211.75
Rate for 1 sq.m 1637.50
129
Manufacturing supplying and fixing in position of teracotta jally 20x20x5cm thick approved quality and
design in cement slurry including cost of materials labour curing lifting fixing in position etc, complete
complying with standard specification and as directed by the departmental officers in all floors.
Consider a size 3.00x3.00m
Area 9.00 sq.m
No.of tiles required
3.00x3.00/0.20x0.20 225.00 nos
Wastage 5% 11.25 nos
Total 236.25 nos
236.25 Cost of teracotta tiles 20x20x5cm(quotation nos 7087.50
nos Rate) 30.00
Page 98
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Providing Blockboard in two layers with first layer in cement mortar 1:5 (one cement and five
130
sand )20mm thick and the second layer in Combination mortar 1:1:6(one cement one lime and six sand)
20mm thick and providing band all round the block board in c.m 1:5 (one cement and five sand) for
20mm thick and 50mm width including cost of one coat of block oxide paint of approved quality complying
with standard specification.
plastering with CM 1:5,20mm thick-10sq.m
0.22 cu.m. Cement mortar 1:5 2471.17 cu.m. 543.66
2.20 Nos. Mason I Class 652.00 Each 1434.40
0.50 Nos. Mazdoor I Class 426.00 Each 213.00
3.20 Nos. Mazdoor II Class 368.00 Each 1177.60
Total for 10 sq.m. 3368.66
Rate for 1 sq.m. 336.87
Say Rate for 1 sq.m 336.87
Combination mortar 1:1:6-20mm thick 10sq.m
53.00 kg Cost of cement 5769.14 1000kg 305.76
0.03 cu.m Slacked lime 937.00 cu.m. 28.11
0.22 cu.m Cost of sand 733.96 cu.m. 161.47
0.22 cu.m Mixing charges 75.70 cu.m. 16.65
2.20 nos Mason I class 652.00 Each 1434.40
0.50 nos Mazdoor I class 426.00 Each 213.00
3.20 nos Mazdoor II class 368.00 Each 1177.60
Total for 10 sq.m 3337.00
Rate for 1 sq.m 333.70
Black board painting -10 sq.m
1.44 lit Black oxide paint 200.00 lit 288.00
0.70 nos Painter I class 522.00 Each 365.40
Total for 10 sq.m 653.40
Rate for 1 sq.m 65.34
MAIN DATA
Consider a black board of size 2.2mx1.0m
2.20 sq.m plastering with CM 1:5,20mm thick 336.87 sq.m 741.10
2.00 sq.m Combination mortar 1:1:6 333.70 sq.m 667.40
1.71 sq.m Black oxide paint 65.34 sq.m 111.73
Total for 2.20 sq.m 1520.24
Rate for 1 sq.m 691.02
Say 691.00
Page 99
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
132 Providing Ferrocement architectural structures like column sunshade etc,for appearance purpose
in c.m 1:2 -5mm thick reinforced with 6mm rods and stirupps covered with chicken mesh plastered and
painted to finish.
0.05 cu.m C.M 1:2 4963.44 cu.m 248.17
3.30 kg Cost of steel 45019.14 1000kg 148.56
2.50 sq.m Chicken mesh 31.65 sq.m 79.13
0.04 nos Mason I class 652.00 nos 26.08
0.08 nos Mazdoor I class 426.00 nos 34.08
LS Sundries LS 23.10
Rate for 1 sq.m 559.12
133 Supplying and fixing colour galvanum sheet roof of 0.47mm thickand steel tubular box section of
100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories
complete complying with standard specification and as directed by the departmental officers.
134 Supplying and fixing best approved best quality porcelin soap dish of
size 150 x 150 x 50mm (white/colour) including cost of teak wood
plugs, brass screws, etc., complete complying with standard
specifications. (The soap tray should be got approved by Executive
Engineer before use on works).
1.00 Nos. porcelin soap dish of size 150 x 150 x 50mm 190.50 Each 190.50
(white)
0.10 Nos. Carpenter II Class 609.00 Each 60.90
0.10 Nos. Mazdoor II Class 368.00 Each 36.80
2.00 Nos. Teak wood plugs 1.05 Each 2.10
2.00 Nos. Brass CP Screws (30 x 6mm) 2.35 Each 4.70
Total / 1 No. 295.00
or say 295.00
1.00 Nos. porcelin soap dish of size 150 x 150 x 50mm 261.00 Each 261.00
(colour)
0.10 Nos. Carpenter II Class 609.00 Each 60.90
0.10 Nos. Mazdoor II Class 368.00 Each 36.80
2.00 Nos. Teak wood plugs 1.05 Each 2.10
2.00 Nos. Brass CP Screws (30 x 6mm) 2.35 Each 4.70
Total / 1 No. 365.50
or say 365.50
Painting the wall two coats with approved weather proof Exterior
Emulsion paint over one primer coat of over cement plastered wall
surface ect., complete complying with standard specification.
10.00 M2 Cleaning the plastered surface 3.50 M2 35.00
0.98 sq.m. Primer Alkalic resistance 147.00 sq.m. 144.06
3.00 Litre Exterior Emulsion 287.00 Litre 861.00
0.50 Litre Painter I Class 522.00 Each 261.00
Page 100
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
0.50 Nos. Mazdoor Grade I 426.00 Each 213.00
0.80 Nos. Mazdoor Grade II 368.00 Each 294.40
Sundries for brushes, sand paper, plaster of paris
LS LS 8.61
putty, etc.
Total for 10 sq.m. 1817.07
Rate for 1 sq.m. 181.70
Page 101
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Rate FOR 1 NO 4,522.00
CLEAR SIZE 0.90 X 0.90
Earth work 1.56 X 1.56 X 0.60 = 1.46 M3
C.C.1:5:10 1.56 x 1.56 x 0.10 = 0.24 M3
B.W. in C.M.1:5 4.52 x 0.23 x 0.60 = 0.62 M3
Plastering C.M. 1:5, 12 mm Tk.
Inside alround 3.60 X 0.60 = 2.16 M2
Outer alround 4.52 X 0.23 = 1.04 M2
Top 5.44 X 0.30 = 1.63 M2
4.83 M2
MAIN DATA.
1.46 M3 Earth work 60.95 M3 88.99
0.24 M3 C.C.1:5:10 3,573.90 M3 857.74
0.62 M3 B.W. C.M.1:5 Ground moulded champer Bricks 5,482.15 M3 3,398.93
4.83 M2 Plastering C.M.1:3 12mm Tk WPC 189.20 M2 913.84
1.85 M2 Precast slab 50mm Thk 424.10 M2 784.59
0.12 M3 P.C.C.1:3:6 4,417.95 M3 530.15
TOTAL FOR 1 NO 6,574.23
Rate FOR 1 NO 6,574.00
Skirting the wall with fine polished Granite Stone Slabs of size 1200 x 600 of 18 /
20mm thick of Jet black best quality in Cement mortar 1:2 in all floors etc., complete
1
complying with standard specifications and as directed by the departmental officers.
Page 102
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
1.00 No Stone cutter 1 class 501.00 each 501.00
0.50 Kg Cotton waste 10.10 1 kg 5.05
Rate for 10 sq.m. 26176.78
Rate for 1 sq.m. 2617.70
54.50
Supplying and fixing mild steel grills for windows,
ventilators, rtc., including priming coat
20.90
75.40
Page 103
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Providing and laying in position, standardised concrete Mix M-2o Grade in accordance with IS 456 using
20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement
content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super
plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve
workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine
crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and
with about (4.79 cu.m) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges,
centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing,
etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without
claiming extra, etc., complete complying with standard specification and as directed by the departmental
officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards.
(No separate payment will be made by the Department for the excess usage of materials).
M 20 CONCRETE
5.00 cu.m 20mm Machine Crushed Stone Jelly 1583.28 cu.m 7916.40
3.30 cu.m 10-12mm Machine Crushed Stone Jelly 1317.78 cu.m 4348.67
4.79 cu.m Sand 733.96 cu.m 3515.67
3250.00 kg Cement 5769.14 MT 18749.71
Page 104
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
Providing and laying in position, Standardised Concrete Mix M-3O Grade in accordance with IS:456-2000
using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum
cementcontent of 400 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser /
superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete,
improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm
machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly
and with about (4.79 cu.m') 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating
charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing,
curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without
claiming extra, etc., complete complying with standard specification and as directed by the departmental
officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards.
(No separate payment will be made by the Department for the excess usage of materials).
M 30 CONCRETE
5.00 cu.m 20mm Machine Crushed Stone Jelly 1583.28 cu.m 7916.40
3.30 cu.m 10-12mm Machine Crushed Stone Jelly 1317.78 cu.m 4348.67
4.79 cu.m Sand 733.96 cu.m 3515.67
4000.00 kg Cement 5769.14 MT 23076.56
Page 105
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
NEW ITEMS
178 Supplying and fixing in position White / Colour Each
Glazed Model Floor Mounted European Water
Closet of best quality and approved make with
100mm “P” or “S” trap connecting with CI pipe of
100mm dia / PVC pipe of 110mm dia, double
flapped rigid PVC black seat and seat cover with
CP brass hinges including cost of white cement,
cement for packing, spun yarn, teak wood plugs,
brass screws, etc., including supplying and fixing
10 litres capacity PVC / 12.5 litres capacity
porcelin low level flushing tank with a pair of CI
brackets, etc., complete with all fittings, such
as, 15mm brass ball valve with polythene float
with brass handle, union coupling connected by
means of 40mm white PVC flush hand using
indian adopter joint including all internal fittings,
such as, 15mm bras connections, 15mm GM
wheel valve, 15mm brass nipple (2 Nos.), 15mm
nylon connection, TW plugs, screws and also
giving necessary connection to the PVC pipe and
painting the CI brackets with 2 coats of approved
paint over one coat of red oxide primer,
dismantling the masonry and re-doing the
dismantled masonry to original condition, etc.,
complete complying with standard specifications.
(The EWC and flushing tank with all accessories
Page 106
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
181 Manufacturing, Supplying and Fixing of Stainless Steel sqm.
Hand rails for staircase using 50mm dia 304L Grade
Stainless Steel pipe of 1.60mm thick at required
locations to a height of
900mm from finished floor level welded to 38mm
dia
Stainless Steel pipe post of 1.00mm thick as
vertical at
900mm centre with 2 Nos. of 25mm dia intermediate
horizontal stainless steel pipe of 1.60mm thick in
between. The vertical pipe has to be welded to the 100
X 100 X 6mm MS base plate encased in the base
concrete. The rate is inclusive of the charges for
cutting, bending, welding, grinding, polishing,
conveyance, electrical charges, etc. complete
Page 107
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
188 Designing the Semi Unitised Structural Glazing System sqm.
with open groove joint as per design intent,
preparation of shop drawings for approval, supply,
fabricate, erect as per approved shop drawings at all
floor levels and all floor heights including
conducting field test as per the test criteria set out in
the particular specification (Metholodgy should be got
approved by the Dept. Officials.) Design the framing
system (i.e. male & Female frame) to support vision
panels, spandrel panels either with glass or aluminium
composite panel, openable, window panels on a
continuous framing supported between floors. Also
design the split framing unutilized glazing system in
case of strip or punched windows with vision panel
proposed with either insulated / Monolithic glass,
groove width in the system both in horizontal and
vertical shall not be more than 20mm. Glazing of panel
shall be done only at factory at the controlled
atmosphere
Page 108
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
191 UPVC Window sqm.
Specification:
Supplying and fixing UPVC (Un-Plasticized
Polyvinyl Chloride) Windows of casement type
(open) from the profile the size of outer
frame 60mm x 58mm and shutter profile are
reinforcement with GI/1mm 125GSM and 100%
corrosion free, the profiles are multi chambered
sections with wall thick of 2mm. The EPDM rubber
(black colour) covered with over all the edges of
frame and shutter the shutter will be provided
with Espag multi power point locks and also it
operates as handle. The corners and joints
should be welded and cleaned. Radiations free
pin headed plain or brown colour glass 4mm thick
should be provided to the shutter and it should
not allow leakage of water even at most ranging
storms and should have key lockable action,
security protective hinges, strong locking
systems and as per size for arresting noise and
energy loss.The connecting mechanism between
sash and outer frame that enables opening of the
window. The window should be fixed to the wall
with 100% packing with screws and silicon
packing all round the frames. The window should
be got approved from the Executive Engineer
before use on work
193 RM
Page 109
Sl. Amount in
Qty. Unit Description Rate in rupees Per
No. rupees
FOAMED PVC DOOR FRAME
Specification:
Providing factory made pre-laminated FPVC
(Formed Polyvinyl Chloride) Door Frame of the
size 105 x 40mm witha wall thickness of 10mm
made out of extruded rigid FPVC profile mitre
joined with 6 Nos. of 5mm long screw. The door
frame shall be fixed to the wall by using 80mm
long screws through the frame with the help of
PVC fasteners of 3 Nos. to be provided for each
vertical member, GI stiffeners of ('U' channel of
size 29 x 9, 1mm, 150mm long) - 3 Nos. at hinge
point, frame reinforcement of ('U' GI channel of
size 46 x 22 x 0.6mm), bottom tie rod of ('U' GI
channel size of 15 x 15 x 1mm), etc., complete
complying with the standard specification. The
door frame should be got approved from the
Executive Engineer before use on work
Page 110
ABSTRACT ESTIMATE
Rate in Unit
Sl. rupees Page
Description
No. No.
1 Earth work excavation for foundation in all soils and sub-soils and to 130.40 cu.m
full depth as may be directed except in rock requiring blasting inclusive of
shoring shuttering, bailing out water wherever necessary and depositing the
surplus earth within the compound in places shown by the departmental
officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing
and levelling the site, etc., complete complying with standard specification.
2 Earth work open excavation in all soils and sub-soils and to full depth as 60.95 cu.m
may be directed except in rock requiring blasting inclusive of shoring
shuttering, bailing out water wherever necessary and depositing the
excavated earth with a lead of 10 mts. within the compound in places shown
by the departmental officers and clearing and levelling the site, etc.,
complete complying with standard specification.
3 Supplying and filling in foundation, basement, etc with filling sand in layers 756.36 cu.m
of not more than 15 cm thick well watered, rammed and consolidated etc.
complete complying with standard specification and as directed by the
departmental officers.
4 Refilling with excavated earth other than sand with an initial head load 25.50 cu.m
of 100 mts. and depositing the earth as shown by the departmental officers
in layers of not more than 15 cm thick well rammed, watered and
consolidated etc. complete complying with standard specification
5 Supplying and filling basement with conveyed earth from 10 km 194.80 cu.m
6 Supplying and filling GRAVEL in 'foundation and basement with filling sand 317.10 cu.m
in layers of not more than 15cm.thick well rammed watered and compacted
-1m3 etc., complete complying with standard specification.
7 Supplying and filling 40mm guauge HBGS stone jelly for dispersion 1224.80 cu.m
trench including loading conveying and unloading and as directed by the
departmental officers etc. complete complying with standard specification.
8 Supplying and filling 25mm guauge HBGS stone jelly for dispersion 1086.80 cu.m
trench including loading conveying and unloading and as directed by the
departmental officers etc. complete complying with standard specification.
9 Supplying and filling 20mm guauge HBGS stone jelly for dispersion 1608.80 cu.m
trench including loading conveying and unloading and as directed by the
departmental officers etc. complete complying with standard specification.
10 Supplying and filling in basement with sand gravel mix in the ratio of 612.40 cu.m
1:1with 0.685 Cu.m of sand and 0.667 Cu.m gravel in layers of not more
than 15cm thick, well rammed, watered and consolidated etc., complete
complying with standard specification.
11 Providing and laying sand gravel mix (1:1) at the rate of 0.62 cu.m of 716.60 cu.m
filling sand and 0.66 cu .m of gravel to consolidated 1hide of 150mm
designed to attain a CBR value of not less than 20 including cost and
conveyance of sand gravel from approved sources to work site and stacking
them to the departmental gauge for premeasurement including labour
charges labour charges for power roller watering and all other tools and
plants employed including all other incidental charges etc., complete (For
road works)
Rate in Unit
Sl. rupees Page
Description
No. No.
12 Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken 3573.90 cu.m
stone jelly) using 40 mm gauge hard broken granite stone jelly for
foundation including dewatering wherever necessary and laid in layers of
not more than 15 cm thick well rammed, consolidated and curing etc.
complete complying with standard specification
13 Cement Concrete 1:5:10 (One cement, Five sand and Ten hard broken 3573.90 cu.m
stone) using 40 mm gauge hard broken jelly for flooring including laying,
consolidating, finishing, rendering the top surface rough to receive the floor,
curing, etc. complete complying with standard specification. (The rate is
inclusive of necessary planking for panelling wherever necessary and as
directed by the departmental officers
14 Cement Concrete 1:4:8 (One Cement, Four sand and eight hard broken 3760.80 cu.m
stone jelly) using 40 mm gauge hard broken granite stone jelly for
foundation including dewatering wherever necessary and laid in layers of
not more than 15 cm thick, well rammed, consolidated and curing etc.
complete complying with standard specification
15 Cement Concrete 1:3:6 (One Cement, Three sand and Six broken stone
jelly) using 40mm size hard broken stone jelly for dummy columns,
excluding cost of centering shuttering reinforcement grills and fabrication
charges but including curing etc. complete. (Reinforced Cement Concrete
1:2:4 for slab to be extended upto top of splashing with pressed tiles and
future extension rods to be embedded in CC 1:3:6 (One Cement, Three
Sand and Six hard broken stone jelly). Dummy columns should be at least
1 metre height)
17 Damp proof course with Cement Mortar 1:4 (One Cement and Four 178.10 sq.m.
sand) 12mm thick mixed with best approved quality water proofing
compound conforming to Indian Standard specification as specified by the
departmental officers at 2% by weight of cement used, finishing and curing
etc. complete complying with standard specification.
18 Supplying and erecting steel centering including necessary supports for 584.55 sq.m.
plane surfaces for Reinforced Cement Concrete works such as column
footings, column pedestals, plinth beams, grade beams, staircase
steps, etc. which require only nominal strutting using mild steel sheets of
size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size
25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size
10cm x 6.5cm spaced at about 75cm centre to centre or at suitable
intervals etc. complete in all floors complying with standard specifcation.
(Payment for centering shall be given after the concrete is laid)
Rate in Unit
Sl. rupees Page
Description
No. No.
19 Supplying and erecting centering for sides and soffits including necessary
supports and strutting upto 3.29 M height for plane surfaces as detailed
below in all floors with all cross bracings using Mild Steel sheets of size 90 x
60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x
25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50
cm spaced at abote 90 cm centre to centre and supported by casurina props
of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc.
complete complying with the standard specificaiton. (Payment for centering
shall be given after the concrete is laid)
a For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed 667.00 sq.m.
blocks, landing slab, waist slab, portico slabs and beams, etc.
b For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, 733.70 sq.m.
facia, vertical wall, etc.
c For plane surfaces such as rectangular or square RCC columns, sunshades, 800.40 sq.m.
top and bottom slab of RCC boxing, etc.
e Centering for curved surfaces of all RCC items of work 1000.50 sq.m.
20 Providing additional strutting to centering of RCC slabs of plain surface 27.50 sq.m.
for every additional 1.0 metre height or part thereof but not less than 30
cm, over the initial 3.00 metre height from floor level using casurina props
of 10cm to 13cm dia including cross bracing etc., complete complying with
standard specification and as directed by the department officers.
21 Cement Concrete 1:2:4 (One Cement, Two sand and Four hard broken
stone jelly) using 20 mm gauge hard broken granite stone jelly for all
RCC items of works excluding cost of reinforcement grill and fabricating
charges, centering and shuttering but including laying, vibrating with
mechanical vibrators, finishing, curing, etc. and providing fixtures like fan
clamps in the RCC floor / roof slabs wherever necessary and bearing
surfaces of walls, beams etc. shall be finished smooth with Cement Mortar
1:3 (One Cement and Three Sand) and kraft paper laid over it without
claiming extra, etc., complete complying with standard specification and as
directed by the departmental officers
a In foundation and basement 6096.10 cu.m
b In Ground floor 6174.30 cu.m
c In First floor 6328.30 cu.m
d In Second Floor 6482.30 cu.m
e In Third floor 6636.30 cu.m
f In Fourth floor 6790.30 cu.m
g In Fifth floor 6944.30 cu.m
Rate in Unit
Sl. rupees Page
Description
No. No.
22 Cement Concrete 1:1-1/2:3 (One Cement, One and a half sand and
Three hard broken stone jelly) using 20 mm gauge hard broken granite
stone jelly for all RCC items of works excluding cost of reinforcement grill
and fabricating charges centering and shuttering but including laying,
vibrating with mechanical vibrators, finishing, curing, etc. and providing
fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and
bearing surfaces of walls, beams etc. shall be finished smooth with Cement
Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it
without claiming extra, etc., complete complying with standard specification
and as directed by the departmental officers
a In foundation and basement 6717.39 cu.m
b In Ground floor 6795.59 cu.m
c In First floor 6949.59 cu.m
d In Second Floor 7103.59 cu.m
e In Third floor 7257.59 cu.m
f In Fourth floor 7411.59 cu.m
g In Fifth floor 7565.59 cu.m
23 Supplying, fabricating and placing in position Mild Steel / Ribbed Tor 6526.66 Qtl
Steel grills for all RCC works as per design given including cost of steel
and G.I. binding wire in all floors etc. complete complying with standard
specification. (Contractor has to make his own arrangements for the supply
of steel and binding wire)
24 Brick work in following Cement Mortar using best quality of country bricks
of size 8-3/4" x 4-1/4" x 2-1/4" for foundation and basement including
curing, etc., complete complying with standard specifiction.
24a Brick work in following Cement Mortar using best quality of country bricks
of size 8-3/4" x 4-1/4" x 2-3/4" for foundation and basement including
curing, etc., complete complying with standard specifiction.
25 Brick work in following Cement Mortar using best quality II class table
moulded chamber burnt bricks of size 9" x 4-1/2" x 3" for foundation
and basement including curing, etc., complete complying with standard
specifiction.
A In Cement Mortar 1:6 (one cement and six sand)
For foundation & basement 5531.60 cu.m
In Ground floor 5583.10 cu.m
In First floor 5686.90 cu.m
In Second floor 5790.70 cu.m
In Third floor 5894.50 cu.m
In Fourth floor 5998.30 cu.m
In Fifth floor 6102.10 cu.m
B In Cement Mortar 1:5 (one cement and five sand)
27 Brick work in following Cement Mortar using best quality II class Ground
moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" for
foundation and basement including curing, etc., complete complying with
standard specifiction.
A In Cement Mortar 1:6 (one cement and six sand)
For foundation & basement 5412.90 cu.m
In Ground floor 5464.40 cu.m
In First floor 5568.20 cu.m
In Second floor 5672.00 cu.m
In Third floor 5775.80 cu.m
In Fourth floor 5879.60 cu.m
In Fifth floor 5983.40 cu.m
28 Brick work in following Cement Mortar using best quality II class Ground
moulded chamber burnt bricks of size 9" x 4-1/2" x 3" for foundation
and basement including curing, etc., complete complying with standard
specifiction.
A In Cement Mortar 1:6 (one cement and six sand)
For foundation & basement 5109.65 cu.m
In Ground floor 5161.15 cu.m
In First floor 5264.95 cu.m
In Second floor 5368.75 cu.m
Rate in Unit
Sl. rupees Page
Description
No. No.
31 Brick partition walls of 11.50cm thickness using best quality II class table
moulded chamber burnt bricks of size 9" x 4-1/2" x 3" in Cement
Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if
found necessary including curing etc. complete and as directed by the
departmental officers. (Hoop iron reinforcement will be measured and paid
for separately)
a Using Marble Slabs of size 4'0'' x 2'0'' and above 2540.40 Sqm
b Using Marble Slabs of size 2'0'' x 2.0" and below 1856.50 Sqm
37 Paving the floor with best approved quality fine polished Kota stone
slabs of size 600 x 600 of 18 / 20mm with machine cut edges and
matching marble slab not less than 100mm width other than Adanga
Marbles as border laid over a cement mortar bed of 20mm thick using
cement mortar 1:3 (One cement and three sand) fixing the slabs in true
right angles with minimum possible width of joints and pointing the joints
with white cement mixed with mathcing colouring pigments and polishing
with floor polisher to a high degree of finish etc., The kota stone slabs and
other materials to be used shall be got approved by the Executive Engineer
concerned before use on work, etc., complete as per standard speicification.
A Fine polished Kota Stone Slab above 600 x 600 of 18 / 20mm size 1038.00 Sq.m
B Fine polished Kota Stone Slab below 600 x 600 of 18 / 20mm size 1101.00 Sq.m
38 Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm 1083.10 Sq.m
(un-polished) in all floors laid in of cement mortor 1:3 (one cement three
sand), 20mm thick and pointed with colour cement neatly including
polishing with polishing stone and oxalic acid etc., so as to perfectly smooth
and glossy and including hire charges for polishing machine and power
consumption charges etc. The kota stone slabs and other materials to be
used shall be got approved by the Executive Engineer concerned before use
on work, etc., complete as per standard speicification.
Rate in Unit
Sl. rupees Page
Description
No. No.
39 Paving the floor with best approved quality fine polished Granite Stone 2012.10 Sq.m
Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey,
Paradise and similar varieties with machine cut edges laid over a cement
mortar bed of 20mm thick using cement mortar 1:3 (One cement and three
sand) fixing the slabs with required cement slurry and laid in true right
angles with minimum possible width of joints and pointing the joints with
white cement mixed with mathcing colouring pigments etc., The granite
stone slabs and other materials to be used shall be got approved by the
Executive Engineer concerned before use on work, etc., complete as per
standard speicification.
39a Paving the floor with fine polished cuddapah stone slab of 38 / 40mm 985.90 Sq.m
thick laid over Cement Mortar 1:3 (One Cement and Three Sand) 20mm
thick over the existing bed of Cement Concrete 1:5:10, (One Cement, Five
Sand and Ten aggregate) and pointing the joints to full depth of slabs with
same mortar mixed with black oxide and the top surface rendered smooth,
curing, etc., The cuddapah stone slabs and other materials to be used shall
be got approved by the Executive Engineer concerned before use on work,
etc., complete complying with standard specification.
40 Paving the floor with best quality Vertified Tiles of size 600 x 600 x 926.90 Sq.m
8mm of approved colour, shade and quality laid in cement mortar 1:3 (one
cement and three sand) 20mm thick in all floors and the top pointed with
the white cement mixed same colour pigments etc., complete complying
with standard specification. (The make and brand of the tiles should be got
approved by Executive Engineer before use on works)
42 Paving the floor with pre-polished concrete anti-skid tiles (Required 1054.50 Sq.m
shape and design) of 20mm thick of approved quality and colour laid in
Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed
with white cement mixed with colouring pigment at the rate of 0.40 Kg. /
sq.m., curing, etc., complete complying with standard specification and as
directed by the departmental officers. (The make and brand of the tiles
should be got approved by Executive Engineer before use on works)
43 Paving the floor with pre-polished concrete anti-skid step tiles (Required 1157.50 Sq.m
shape and design) of 20mm thick of approved quality and colour laid in
Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed
with white cement mixed with colouring pigment at the rate of 0.40 Kg. /
sq.m., curing, etc., complete complying with standard specification and as
directed by the departmental officers. (The make and brand of the tiles
should be got approved by Executive Engineer before use on works)
44 Dadooing walls with following best approved quality, white / colour glazed
tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two
sand) 10mm thick and pointing the joints with white cement mixed with
colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing,
etc., complying with standard specification and as directed by the
departmental officers.
a Dadooing with white glazed tiles of size 150mm x 150mm x 6mm 962.90 Sq.m
b Dadooing with plain colour glazed tiles of size 150mm x 150mm x 6mm 1018.70 Sq.m
c Dadooing with printed design colour glazed tiles of size 150mm x 150mm x 1090.70 Sq.m
6mm
d Dadooing with granite tiles of synthetic grey, paradise, and similar varieties 1332.20 Sq.m
of suitable sizes
e Dadooing with printed design colour glazed tiles of size 300mm x 200mm x 1047.20 Sq.m
6mm
45 Weathering course in brick jelly lime concrete using broken brick jelly
of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the
proportion of brick jelly to lime being 32:12.5 by volume and laid over the
RCC roof slab in a single layer of required slope and finished by beating the
concrete with wooden beaters of approved pattern, keeping the surface
constantly wet by sprinkling lime jaggery water, etc., complete as per
standard specification and as directed by the deparmental officers.
46 Finishing the top of roof with one course of machine pressed tiles
following size of size of approved quality set in Cement Mortar 1:3 (One
Cement and Three Sand) 12mm thick mixed with water proofing compound
conforming to ISS at 2% by weight of cement used and the joints pointed
neatly to full depth of tiles with the same cement mortar mixed with red
oxide and water proofing compound including curing etc., complete
complying with standard specification and as directed by the departmental
officers
Pressed Tiles of 230mm x 230mm x 20mm 868.90 Sq.m
Pressed Tiles of 200mm x 200mm x 20mm 888.10 Sq.m
47 Finishing the top of slopped roof, sun-shade with Machine Pressed 1251.90 Sq.m
Ornamental Tiles of approved quality laid in cement mortar 1:3 20mm
thick mixed with WPC at 2% by weight of cement used and top pointed with
the same red oxide mixed mortar etc complete, complying with standard
specifications
48 Supplying and fixing fine polished cuddapah slab of following thickness for
cup-board arrangements including laying to correct alignment with
necessary cement mortar and black powder etc, complete complying with
standard specification and as direct.
a 20 / 30mm thick 427.70 Sq.m
b 38 / 40mm thick 458.70 Sq.m
49 Supplying and fixing in position best approved of BIS quality PVC rain
water down fall pipes having a pressure of 4 kg. / sq.cm including cost of
necessry PVC shoe, PVC bend, cast iron gratings of required diameter and
special clamps, brass screws, nails, etc., and fixing of cast iron gratings at
junction of parapet and the RCC roof slab including finishing neatly etc.,
complete. The rate shall be inclusive of cast of removable cast iron grating.
The PVC pipe shall be fixed in wall with special type of "U" clamp at the
centre of the pipe line in addition to those for more than 3.0 metre pipe
length, etc., complete complying with standard specification.
51 Supplying and fixing in position steel balustrades using 20mm square 2096.40 Sq.m
rods spaced at 150mm centre to centre so that the two balustrades in
each step shall be placed centrally and the top of balustrades connected
with the hand rails (cost of hand rail shall be measured and paid separately)
by means of MS flats of size 40mm x 6mm in the groove 40mm x 6mm
provided at the bottom of hand rail; the bottom of balustrades shall be fixed
on to the top of step concrete. An additional MS flat of size 50mm x 6mm
shall be provided at the centre of balustrades connecting all square rods to
the entire length including cost of square rods, flat and applying one coat of
red oxide primer to the iron surfaces, etc., complete complying with
standard specification and as directed by the departmental officers.
52 Supplying and fixing 40mm dia GI pipe for staircase hand rail including 177.76 Rm
labour charges for cutting, welding and fixing with MS flats (excluding cost
of flat), etc., as directed by the departmental officers
53 Supplying and fixing GI pipe handrails for handicapped persons using 1268.45 Sq.m
50mm dia GI pipe double handrail at a height of 800mm and 900mm from
floor level with 25mm thick MS square rods as balusters embedded in the
concrete and welded with pipe at 60cm centre to centre as shown in CA Job
No. 9123 / 1 including cutting, welding, bending and fixing charges and
applying one coat of red oxide primer for MS members as directed by the
departmental officers
54 Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm 168.10 Sq.m
thick in all floors including curing etc. complete complying with standard
specification and as directed by the departmental officers.
55 Plastering with Cement Mortar 1:5 (One cement and Five sand), 20mm 336.90 Sq.m
thick in all floors including curing etc. complete complying with standard
specification and as directed by the departmental officers.
56 Special ceiling plastering and finishing the exposed surface of all RCC 194.85 Sq.m
items of work such as slabs, beams, sunshades, facia, canopy slab,
staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement
and Three Sand) 10mm thick including hacking the surfaces, providing
cement mortar nosing, beading for sunshades, staircases, steps, landing
slabs and curing, etc., in all floors complying with standard specification and
as directed by the departmental officers
57 Plastering the surface of walls with Cement Mortar 1:3 (One cement 183.65 Sq.m
and Three sand), 12mm thick in all floors including curing etc., complete
complying with standard specification and as directed by the departmental
officers.
58 Plastering the surface of walls with Cement Mortar 1:3 (One cement 361.25 Sq.m
and Three sand), 20mm thick in all floors including curing etc., complete
complying with standard specification and as directed by the departmental
officers.
59 Plastering with Cement Mortar 1:3 (One Cement and Three Sand) 189.20 Sq.m
12mm thick mixed with water proofing compound conforming to BIS
at 2% by weight of cement used including finsihing, curing, etc., complete in
all floors complying with standard specification and as directed by the
departmental officers.
60 Plastering with Cement Mortar 1:3 (One Cement and Three Sand) 370.00 Sq.m
20mm thick mixed with water proofing compound conforming to BIS
at 2% by weight of cement used including finsihing, curing, etc., complete in
all floors complying with standard specification and as directed by the
departmental officers.
Rate in Unit
Sl. rupees Page
Description
No. No.
61 Stucco plastering 12mm thick using blue granite chips of size 10mm 399.10 Sq.m
and below over the existing base plastering with cement mortar 1:5, 12mm
thick, etc., complete complying with standard specifications (SI 314)
62 White washing one coat with freshly burnt white shell lime in all floors 15.70 Sq.m
including cost of lime, blue powder, fevicol type gum, brushes, scaffolding
charges, etc., complete complying with standard specification and as
directed by the departmental officers.
63 White washing two coats with freshly burnt white shell lime in all floors 22.80 Sq.m
including cost of lime, blue powder fevicol type gum, brushes, scaffolding
charges, etc., complete complying with standard specification and as
directed.
64 Colour washing two coats in all floors using best freshly burnt white shell
lime and best quality of approved variety of colouring pigment including cost
of lime, colouring pigments, fevicol type gum, brushes, scaffolding charges
etc., complete complying with standard specification. Mineral colouring
pigments not affected by lime should only be used (stainers and colour
solutions should not be used.)
a For one Coat 23.55 Sq.m
65 Supplying and painting the walls with two coats of cement paint over 143.95 Sq.m
one coat of cement primer as instructed by the departmental officers
including preparation of surface curing, etc., complete in all floors complying
with standard specifications (The colour and shade of the cement paint shall
be got approved by the Executive Engineer before use of work).
For basic one coat of primer with cement paint 51.10 Sq.m
For finishing two coats 92.85 Sq.m
66 Supplying and painting the walls with two coats of cement paint as 97.60 Sq.m
instructed by the departmental officers including preparation of surface
curing, etc., complete in all floors complying with standard specifications
(The colour and shade of the cement paint shall be got approved by the
Executive Engineer before use of work).
67 Supplying and painting the walls with two coats of oil bound distemper 138.05 Sq.m
over one coat of water based cement primer including cost for
distemper, primer, cleaning and scrapping the walls, rendering the walls
smooth with necessary putty, brushes, scaffolding arrangements, labour
charges, etc., as per standard specification. (The colour and shade of the
distemper shall be got approved by the Executive Engineer before use of
work).
68 Distempering the old wall and ceiling one coat with best oil bound
distember of approved quality including preparation of surface, the rate
includes cost of brushes, high scaffolding arrangements, neat finishes, etc.,
complete complying with standard specification and as directed by the
departmental officers.
a For one coat 43.70 Sq.m
69 Painting two coats of newly plastered wall surface with ready mixed 173.15 Sq.m
plastic emulsion paint of first class quality and of approved colour over a
priming coat including thorough scrapping, clean removal of dirt, and
including necessary plaster of paris putty, wherever required etc., complete
complying with standard specification.
Rate in Unit
Sl. rupees Page
Description
No. No.
70 Painting new wood work with two finishing coats of synthetic enamel 179.80 Sq.m
ready mixed paint of approved quality and colour over one coat
priming coat in all floors including the cost of primer etc., complete
complying with standard specification. (The make, quality and colour of
paint should be got approved by the Executive Engineer before use on
works.)
71 Painting new iron works such as steel doors, windows, ventilators, window
bars, balustrades etc., with two coats of best approved first quality and
colour of synthetic enamel paint over the existing red oxide priming coat in
all floors excluding cost of priming coat etc., complete complying with
standard specification. (The make, quality and colour of paint should be got
approved by the Executive Engineer before use on works.)
74 Providing expansion joint in RCC floor slab for 12.5mm width using 493.80 Rm
polysulphide as sealent on the top and bottom for a depth of 7.5mm each
and packing the inner space using compressible non-absorbent filler
materials including cost of labour for cutting and fixing filler materials and
laying polysulphide sealent with necessary spatula etc., complete complying
with standard specifications and as directed
75 Providing expansion joint 12.5mm width in RCC roof slabs between 696.30 Rm
RCC twin beams using PVC water bar of 150mm wide centre bulb of
4mm to 6mm thickness of approved quality and brand and including filling
the inner space with suitable non-absorbent flexible and well compressible
filler materials of approved quality and covering the top surface with GI
sheet 30cm wide and 1.6mm thick using phill plugs, GI screws, limpet cup
washers, bitumen washers, etc., complete complying with standard
specifications and as directed
76 Providing expansion joint of 12.5mm wide in between RCC twin 573.10 Sq.m
columns from top of pedastal to full height including filling the inner space
with suitable non-absorbent, flexible and well compressible filler materials of
approved quality and brand; finishing the sides of RCC columns with
polysulphide sealents for a depth of 7.5mm on either side covering the inner
space filled with filler materials as above etc., complete complying with
standard specifications and as directed.
77 Manufacturing, supplying and fixing Precast Reinforced Cement
Concrete slabs of following thickness in RCC 1:2:4 (one cement, two
sand and four aggregates), using following HBGS jelly excluding cost of
reinforcement steel in position but including cost of moulding charges,
casting of slab, finishing, curing and fixing in position in all floors etc.,
complete complying with standard specification and as directed.
a 25mm thick precast slab using 10mm HBGS jelly 206.60 Sq.m
b 50mm thick precast slab using 20mm HBGS jelly 424.10 Sq.m
c 75mm thick slab (using 20mm HBGS Jelly) 637.25 Sq.m
Rate in Unit
Sl. rupees Page
Description
No. No.
78 Manufacturing, supplying and fixing in position plain cement concrete 549.00 Sq.m
precast pavement slab of size 450mm x 450mm of 50mm thick in
Cement Concrete 1:2:4 (One cement, Two sand and Four jelly) using 20mm
HBG stone jelly including cost of moulding charges, casting of slab, finishing,
curing, fixing and pointing the slab with CM 1:3 (One Cement and Three
Sand) to full depth of slab etc., complete complying with standard
specification and as directed
79 Manufacturing, supplying and fixing in position plain cement concrete 723.30 Sq.m
precast kerb slab of size 600mm x 600mm x 100mm in Cement
Concrete 1:2:4 (One cement, Two sand and Four jelly) using 20mm HBG
stone jelly including cost of moulding charges, casting of slab, finishing,
curing, fixing and pointing the slab with CM 1:3 (One Cement and Three
Sand) to full depth of slab etc., complete complying with standard
specification and as directed
80 Manufacturing, supplying and fixing in positon of RCC Jally of 5cm thick in 964.65 Sq.m
cement concrete 1:2:4 using 20mm machine crushed stone jelly (excluding
cost of reinforcement steel) including cost of mould, finishing, curing, lifting,
fixing in position etc., complete complying with standard specification and as
directed
81 Supplying and fixing AC sheet roofing with 6mm thick asbestos cement 553.10 Sq.m
sheets of fully corrugated (grey colour) of approved quality by drilling holes
(and not by punching) with necessary ‘J’ / ‘U’ bolts and nuts of 8mm dia of
suitable length and providing one set of bitumen washers of 25mm dia and
1.60mm thick for each bolt including protruding portion of bolts in roof shall
be covered with bitumen compound etc., complete complying with standard
specification and as directed.
WATER SUPPLY AND SANITARY ARRANGEMENT ITEMS OF WORK
Internal / External water supply arrangements
82 Supplying, laying and jointing G.I. Pipes of approved quality and best
variety of "B" class pipe of the following dia including labour fixing G.I.
Specials, (excluding charges for cutting and threading of pipes, cost of such
specials) to wall with necessary teak wood plugs, clamps, screws, thread
balls, shellac, etc., making holes on the walls (or) drilling holes in roof and
making good the dismantled portions to original condition with necessray
brick work / concrete and plastering wherever necessry with necessary
scaffolding charges. The pipes are to be painted with the 2 coats of good
variety and approved best quality of synthetic enamel paint over a priming
coat of red oxide etc., complete in all floors complying with standard
specification. G.I. pipes shall be got approved by the Executive Engineer
before use on works.
Above ground level.
84 Supplying and fixing in position first quality and approved variety of Gun
metal Gate Valve / Wheel Valve with BIS make of the following dia
including cost of shellac, thread balls, etc., complete complying with
standard specifications (for both internal and external water supply
arrangements). The valves to be used on work shall be got approved by the
Executive Engineer before use on work.
I Gate Valve
II Wheel Valve
Rate in Unit
Sl. rupees Page
Description
No. No.
85 Supplying and fixing in position 15mm dia brass CP screw down tap /
Pillar tap (heavy duty) of approved make conforming to BIS specifications
and quality including cost of shellac, thread, etc., complete complying with
standard specification and including cutting and threading wherever
necessary. (Taps should be got approved by the Executive Engineer before
use on the works)
a 15mm dia CP Screw Down Tap 301.90 Each
87 Supplying and fixing approved best quality brass CP towel rail 600mm long 430.40 Each
and 20mm dia with brackets of same materials including cost of teak wood
plugs and CP screws, etc., complete complying with standard specifications.
(The tower rail should be got approved by Executive Engineer before use on
works).
88 Supplying and fixing approved best quality aluminium anodised towel 297.20 Each
rail 600mm long and 20mm dia with brackets of same materials including
cost of teak wood plugs and CP screws, etc., complete complying with
standard specifications. (The tower rail should be got approved by Executive
Engineer before use on works).
89 Supplying and fixing best approved best quality brass CP soap tray of size 262.60 Each
150 x 150mm including cost of teak wood plugs, brass screws, etc.,
complete complying with standard specifications. (The soap tray should be
got approved by Executive Engineer before use on works).
V GI Reducer
a 50 x 40 mm dia 168.55 Each
b 40 x 32 mm dia 135.55 Each
c 32 x 25 mm dia 105.45 Each
d 25 x 20 mm dia 64.25 Each
e 20 x 15 mm dia 45.10 Each
f 40 x 25 mm dia 110.30 Each
g 32 x 20 mm dia 83.35 Each
VI GI Reducer Elbow
a 50 x 40 mm dia 185.45 Each
b 40 x 32 mm dia 158.65 Each
c 32 x 25 mm dia 123.15 Each
d 25 x 20 mm dia 87.35 Each
e 20 x 15 mm dia 65.00 Each
f 40 x 25 mm dia 130.80 Each
g 32 x 20 mm dia 100.45 Each
VII GI Reducer Tee
a 50 x 40 mm dia 260.05 Each
b 40 x 32 mm dia 220.15 Each
c 32 x 25 mm dia 182.90 Each
d 25 x 20 mm dia 131.90 Each
e 20 x 15 mm dia 109.95 Each
f 40 x 25 mm dia 197.00 Each
g 32 x 20 mm dia 149.55 Each
VII GI Hex Nipple
I
a 50 mm dia 88.95 Each
b 40 mm dia 71.95 Each
c 32 mm dia 60.35 Each
d 25 mm dia 46.05 Each
e 20 mm dia 37.15 Each
f 15 mm dia 25.75 Each
Rate in Unit
Sl. rupees Page
Description
No. No.
92 Supplying and fixing in position best quality and approved make Indian
made white / colour glazed earthernware wash hand basin of size
550 x 400mm (with pedestal / without pedestal) with a pair of cast iron
brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class
GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve,
15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste
coupling including fixing of wash basin using CI brackets on to the wall in
position with TW plugs and screws, rubber washers, white lead and giving
necessary water supply connection and painting the brackets with two coat
of painting over a priming coat of anti-corrosive paint including testing for
leakages etc., complete complying with standard specification and as
directed by the departmental officers. (The wash hand basin and specials
should be got approved by the Executive Engineer before use on works).
93 Supplying and fixing in position best quality approved make white glazed 3135.00 Each
earthernwere sink of size of 600 x 450 x 200mm including cost of
32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug
and chain, 15mm dia brass nipple including fixing the sink in position and
testing for leakages etc., complete complying with standard specifications
excluding CI brackets. [The sink and specials should be got approved by
the Executive Engineer before use on works]
95 Supplying and fixing in positon Indian Water Closet (Oriya type) of size 3986.00 Each
580 x 440mm white glazed earthern ware of approved quality and
brand with "P" or "S" trap conforming to BIS with sand cushion and forming
flooring alround the closet using 40mm broken brick jelly in lime concrete
1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing
the top to the required slope and including giving necessary connection to
CI soil pipes (including the cost of 100mm dia CI pipe for a length of
600mm) by dismantling brick masonry wall / reinforced cement concrete
roof / floor slab and making good the dismantled portion to the original
condition with leakages etc., complete complying with standard
specifications and as directed by the departmental officers. (The water
closet should be got approved by the Executive Engineer before use on
works).
Rate in Unit
Sl. rupees Page
Description
No. No.
96 Supplying and fixing in positon Indian Water Closet (Oriya type) of size 4306.00 Each
580 x 440mm colour glazed earthern ware of approved quality and
brand with "P" or "S" trap conforming to BIS with sand cushion and forming
flooring alround the closet using 40mm broken brick jelly in lime concrete
1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing
the top to the required slope and including giving necessary connection to
CI soil pipes (including the cost of 100mm dia CI pipe for a length of
600mm) by dismantling brick masonry wall / reinforced cement concrete
roof / floor slab and making good the dismantled portion to the original
condition with leakages etc., complete complying with standard
specifications and as directed by the departmental officers. (The water
closet should be got approved by the Executive Engineer before use on
works).
97 Supplying and fixing in positon Indian Water Closet (Oriya type) of size 3785.00 Each
580 x 440mm white glazed earthern ware of approved quality and brand
with "P" or "S" trap conforming to BIS with sand cushion and forming
flooring alround the closet using 40mm broken brick jelly in lime concrete
1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing
the top to the required slope and including giving necessary connection to
PVC pipes (including the cost of 110mm dia PVC pipe for a length of
600mm) by dismantling brick masonry wall / reinforced cement concrete
roof / floor slab and making good the dismantled portion to the original
condition with leakages etc., complete complying with standard
specifications and as directed by the departmental officers. (The water
closet should be got approved by the Executive Engineer before use on
98 works).
Supplying and fixing in positon Indian Water Closet (Oriya type) of size 4105.00 Each
580 x 440mm colour glazed earthern ware of approved quality and brand
with "P" or "S" trap conforming to BIS with sand cushion and forming
flooring alround the closet using 40mm broken brick jelly in lime concrete
1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing
the top to the required slope and including giving necessary connection to
PVC pipes (including the cost of 110mm dia PVC pipe for a length of
600mm) by dismantling brick masonry wall / reinforced cement concrete
roof / floor slab and making good the dismantled portion to the original
condition with leakages etc., complete complying with standard
specifications and as directed by the departmental officers. (The water
closet should be got approved by the Executive Engineer before use on
works).
Rate in Unit
Sl. rupees Page
Description
No. No.
a White glazed European Water Closet with 10 litre capacity PVC flushing 5030.00 Each
tank fixed on to wall
b White glazed European Water Closet with 10 litre capacity PVC flushing 6461.00 Each
tank fixed with CI brackets
c Colour glazed European Water Closet with 10 litre capacity PVC 5420.00 Each
flushing tank fixed on to wall
d Colour glazed European Water Closet with 10 litre capacity PVC 6851.00 Each
flushing tank fixed with CI brackets
e White glazed European Water Closet with 12.5 litre capacity porcelin 6669.00 Each
flushing tank fixed on to wall
f White glazed European Water Closet with 12.5 litre capacity procelin 8100.00 Each
flushing tank fixed with CI brackets
g Colour glazed European Water Closet with 12.5 litre capacity porcelin 8369.00 Each
flushing tank fixed on to wall
h Colour glazed European Water Closet with 12.5 litre capacity procelin 9800.00 Each
flushing tank fixed with CI brackets
100 Supply and fixing in position of best Indian make white / colour glazed
earthernware lipped mouth flat back urinal of best quality and
approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia
bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required
length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing
the urinals in position with necessary TW plugs, clamps, screws, etc.,
including dismantling masnory and re-doing the same to the original
condition, etc., including painting the pipe with two coats of best quality
approved synthetic enamel paint over one coat of red oxide primer and
checked without any leakage etc. complete complying with standard
specifications and as directed by the departmental officers. (The urinal
should be got approved by the Executive Engineer before use on works.)
a White glazed earthernwere lipped mouth flat back urinal 1783.50 Each
b Colour glazed earthernwere lipped mouth flat back urinal 1915.50 Each
Rate in Unit
Sl. rupees Page
Description
No. No.
101 Supplying and fixing in position Indian make white glazed earthenware 1250.00 Each
squating type urinal of best quality and approved make including
dismantling masonry, if necessary and re-doing the same to original
condition, etc., complete complying with standard specification. (The
squatting urinal should be got approved by the Executive Engineer before
use on works).
102 Supplying and fixing position CI Nahani Trap / Floor Trap of the following
sizes with best stainless steel gratings of approved brand and quality, fixed
over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of
sand and five part of 40mm gauge brick jelly) and finished with Cement
Mortar 1:3 (One Cement, Three sand) including dismantling masonry works
wherever found necessary and making good the dismantled portions to the
original condition and giving connection to the CI / PVC pipes, etc., complete
complying with standard specification. (The Nahani Trap should be got
approved by the Executive Engineer before use on works)
a Nahani Trap of size 100 x 75mm with stainless steel gratings 627.00 Each
b Nahani Trap of size 75 x 50mm with stainless steel gratings 568.50 Each
103 Supplying, laying and jointing glazed stone ware pipes of the following
dia of approved quality with spigot and socket ends and fixing them in dry
condition using spun yarn and cement including petty masonry shoring
and strutting wherever found necessary and laying the pipe line in the
alignment at the specified gradient and testing with necessary tools and
plants, etc., and re-filling the trench with excavated earth and levelling the
ground etc., complete complying with standard specifications. (Earth work
excavation, re-filling with excavated earth will be measured and paid
separately).
104 Supplying, laying and jointing glazed stoneware pipes of following dia of
approved best quality with spigot and socket ends (in reverse direction) in
dry condition and laid in loose joints (i.e.) without cement and spun yarn,
so that the waste water can be drained to the trenches already available,
excluding cost of earth work excavation, cost of re-filling with sand / earth,
but including laying the pipe in true alignment and gradient and conducting
required water supply test for draining with necessary tools and plants, etc.,
complete complying with standard specifications.
a 100mm dia stoneware pipe ( loose joints) 175.85 Rm
b 150mm dia stoneware pipe ( loose joints) 238.50 Rm
105 Supplying and fixing in position 150mm dia stoneware tee of approved 310.20 Each
best quality and provding leak proof joints with cement, spun yarn, etc.,
including dismantling the brick work and re-doing the dismantled portion to
the original condition, etc., complete complying with standard specifications
(The stoneware tee shall be got approved by the Executive Engineer before
use on work)
Rate in Unit
Sl. rupees Page
Description
No. No.
106 Supplying and fixing in position 150 x 100mm "P" or "S" stoneware gully 750.00 Each
trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x
230mm at bottom and top respectively with necessary earth work
excavation laid over a bed of brick jelly cement concrete 1:3:6 (One
cement, Three sand and Six broken brick jelly) 150mm thick using 40mm
size broken brick jelly including necessary brick work and plastering
including dismantling masonry wherever necessary and re-doing the
damaged portions to the original conditions using cement concrete 1:3:6
using 20mm stone jelly for fixing the gully trap and giving connections to
stoneware sewer line etc., complete complying with standard specifications.
[Earth work excavation, brick work, plastering shall be measured and paid
separately]. The stoneware gully trap should be got approved by the
Executive Engineer before use on works.
107 Supplying and fixing AC ventilating shaft of 100mm dia with 3 metre 513.80 Each
height including cost of 100mm dia AC cylindrical cowl of best approved
quality etc., complete complying with standard specifications and as directed
by the departmental officers
108 Supplying and fixing PVC ventilating shaft of 110mm dia (having 892.45 Each
working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC
cylindrical cowl of best approved quality etc., complete complying with
standard specifications and as directed by the departmental officers
109 Supplying and fixing in position CI manhole covers with CI frames 2184.00 Each
(Heavy duty) of size 60cm x 60cm of best approved quality as per standard
specification etc., complete compying with standard specifications
110 Supplying, laying and position best quality Indian cast iron soil / waste
pipes of following dia of approved brand and quality conforming to BIS and
providing leak proof joints with spun yarn and making connection to all
sanitary fittings with required number of special, clamps, cement and spun
yarn, dismantling the masonry / RCC wherever necessary and making good
the dismanlted portion to the original condition including painting the cast
iron pipes and fittings with two coats of anti corrosive paint of approved
quality and colour and the pipes fixed in postion in true alignment, etc.,
complete complying with standard specifications (The CI pipes shall be got
approved by the Executive Engineer before use on work)
A Plain Bend
C Plain TEE
G COWL
112 Supplying and fixing in position best quality PVC soil / waste pipes of
various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof
joints using PVC adhesives including fixing to the wall with special PVC / MS
clamp, teak wood plugs, brass screws, etc., and making connection to all
sanitary fittings, dismantling masonry / RCC works wherever found
necessary and making the good dismantled portion to the original condition,
including testing for any leakages, etc., complete complying with standard
specifications. (The PVC pipes should be got approved by the Executive
Engineer before use on works). The rate for earth work excavation will be
measured and paid separately in the cases where the pipe lines are
proposed to laid below ground level
a 75mm dia PVC soil / waste pipe 288.35 Rm
b 110mm dia PVC soil / waste pipe 381.35 Rm
c 160mm dia PVC soil / waste pipe 628.05 Rm
Rate in Unit
Sl. rupees Page
Description
No. No.
113 Supplying and fixing in position PVC specials of the following dia and types
of approved quality confirming to BIS and providing leak proof joints
including fixing to the walls and giving connection to the PVC soil stacks,
dismantling the masonry or RCC works and re-doing the dismantled portion
to original condition etc., complete complying with standard specifications.
(The PVC specials should be got approved by the Executive Engineer before
use on works).
A PVC Elbow
1 160mm dia 318.65 Each
2 110mm dia 306.65 Each
3 75mm dia 276.75 Each
B PVC Elbow with Door
1 160mm dia 354.25 Each
2 110mm dia 336.15 Each
3 75mm dia 283.05 Each
C PVC Tee
1 160mm dia 370.95 Each
2 110mm dia 359.85 Each
3 75mm dia 306.65 Each
D PVC Tee with Single Door
1 160mm dia 413.65 Each
2 110mm dia 383.65 Each
3 75mm dia 330.45 Each
E PVC Tee with Double Door
1 160mm dia 465.35 Each
2 110mm dia 448.55 Each
3 75mm dia 359.85 Each
F PVC Bend
1 160mm dia 324.25 Each
2 110mm dia 312.45 Each
3 75mm dia 283.05 Each
G PVC "Y"
1 160mm dia 377.95 Each
2 110mm dia 366.05 Each
3 75mm dia 312.45 Each
H PVC "Y" with Single Door
1 160mm dia 416.85 Each
2 110mm dia 389.85 Each
3 75mm dia 330.45 Each
Rate in Unit
Sl. rupees Page
Description
No. No.
116 Supplying and fixing in position CP shower rose with CP stop cock 438.00 Each
arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with
necessary cutting, threading and jointing using shellac etc., complete
complying with standard specification and as directed by the departmental
officers (The CP shower rose should be got approved by the Executive
Engineer before use on works).
Internal Water Supply Arrangements using PVC pipes and PVC
specials
Rate in Unit
Sl. rupees Page
Description
No. No.
117 Supplying, laying and jointing PVC pipes (having working pressure 10 kg. /
sq.cm) of approved quality and best variety conforming to BIS of the
following dia including cutting, threading and fixing PVC specials using PVC
adhesives (but excluding cost of such specials) and fixing into wall with teak
wood plugs, PVC clamps and screws making holes on the wall (or) drilling
holes in the roof and making good the dismantled portion to original
condition with necessary brick work / cement concrete and plastering neatly
wherever necessary with necessary scaffolding charges, etc., complete
complying with standard specifications. The PVC pipes shall be got
approved by Executive Engineer before use on works.
118 Supplying, laying and jointing PVC pipes (having working pressure 10 kg. /
sq.cm) of approved quality and best variety conforming to BIS of the
following dia including cutting, threading and fixing PVC specials using PVC
adhesives (but excluding cost of such specials) and fixing into wall with teak
wood plugs, PVC clamps and screws making holes on the wall (or) drilling
holes in the roof and making good the dismantled portion to original
condition with necessary brick work / cement concrete and plastering neatly
wherever necessary with necessary scaffolding charges upto 4 metre height
above ground level, etc., complete complying with standard specifications.
The PVC pipes shall be got approved by Executive Engineer before use on
works.
I Above Ground Level
c 32 mm x 25 mm 8.50 Each
d 40 mm x 32 mm 11.40 Each
e 50 mm x 40 mm 19.60 Each
G Reducer Tee
a 20 mm x 15 mm 7.30 Each
b 25 mm x 20 mm 8.50 Each
c 32 mm x 25 mm 12.20 Each
d 40 mm x 32 mm 14.70 Each
e 50 mm x 40 mm 24.50 Each
H Reducer Elbow
a 20 mm x 15 mm 6.00 Each
b 25 mm x 20 mm 7.30 Each
c 32 mm x 25 mm 9.70 Each
d 40 mm x 32 mm 12.20 Each
e 50 mm x 40 mm 18.30 Each
J Jet Nipple
a 25 mm Dia 15.80 Each
b 32 mm Dia 20.70 Each
120 Providing Anti-termite treatment to soil adjecent and under building 95.00 Sqm
foundation, plinth periphery of the building by application of chemicals of IS
63613 part I to IV in stages to suit the progress of work consist as per the
detailed specification as below. Including breaking of termite mounds,
making holes with crow bar, closing the holes after the treatment and
including cost of chemicals, labour charges, transport and storing etc.,
complete and as directed by the departmental officers.
PUBLIC WORKS DEPARTMENT
BUILDING ORGANISATION
DATA FOR THE YEAR 2019-2020
Sl. Rate in
Description Unit
No. rupees
LEAD STATEMENT
Mortar
1 Earth work excavation for foundation 130.40 cu.m
2 Earth work open excavation in all soils 60.95 cu.m
3 Supplying and filling in foundation, basement, etc with filling sand 756.36 cu.m
4 Refilling with excavated earth other than sand 25.50 cu.m
5 Supplying and filling basement with conveyed earth from 10 km 194.80 cu.m
6 Supplying and filling GRAVEL in 'foundation and basement 317.10 cu.m
7 S&F 40mm guauge HBGS stone jelly for dispersion trench 1224.80 cu.m
8 S&F 25mm guauge HBGS stone jelly for dispersion trench 1086.80 cu.m
9 S&F 20mm guauge HBGS stone jelly for dispersion trench 1608.80 cu.m
10 Supplying and filling in basement with sand gravel mix 612.40 cu.m
11 Providing and laying sand gravel mix (1:1) (For road works) 716.60 cu.m
12 Cement Concrete 1:5:10 using 40 mm stone jelly for foundation 3573.90 cu.m
13 Cement Concrete 1:5:10 using 40 mm stone jelly for flooring 3573.90 cu.m
14 Cement Concrete 1:4:8 using 40 mm stone jelly for foundation 3760.80 cu.m
15 Cement Concrete 1:3:6 using 40mm size stone jelly for dummy columns
For foundation & basement 4072.40 cu.m.
For Ground floor 4150.60 cu.m.
For First floor 4304.60 cu.m.
For Second floor 4458.60 cu.m.
For Third floor 4612.60 cu.m.
For Fourth floor 4766.60 cu.m.
16 PCC- 1:2:4 using 20mm jelly for wearing coat 4515.90 cu.m.
17 Damp proof course with Cement Mortar 1:4 -12mm thick 178.10 sq.m.
18 Supplying and erecting steel centering 584.55 sq.m.
19 Supplying and erecting centering for sides
a For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, 667.00 sq.m.
landing slab, waist slab, portico slabs and beams, etc.
b For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, 733.70 sq.m.
vertical wall, etc.
c For plane surfaces such as rectangular or square RCC columns, sunshades, top 800.40 sq.m.
and bottom slab of RCC boxing, etc.
d For circular columns 1600.80 sq.m.
e Centering for curved surfaces of all RCC items of work 1000.50 sq.m.
20 Providing additional strutting to centering of RCC slabs 27.50 sq.m.
21 CC 1:2:4 -20 mm gauge hard broken granite stone jelly
a In foundation and basement 6096.10 cu.m
b In Ground floor 6174.30 cu.m
c In First floor 6328.30 cu.m
d In Second Floor 6482.30 cu.m
e In Third floor 6636.30 cu.m
f In Fourth floor 6790.30 cu.m
g In Fifth floor 6944.30 cu.m
22 Cement Concrete 1:1-1/2:3
a In foundation and basement 6717.39 cu.m
b In Ground floor 6795.59 cu.m
c In First floor 6949.59 cu.m
d In Second Floor 7103.59 cu.m
e In Third floor 7257.59 cu.m
f In Fourth floor 7411.59 cu.m
g In Fifth floor 7565.59 cu.m
Sl. Rate in
Description Unit
No. rupees
23 Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills 6526.66 Qtl
for all RCC works
24 BRICK WORK FOR 230mm Thick wall
Country bricks of size 8-3/4" x 4-1/4" x 2-1/4"
A In Cement Mortar 1:6 (one cement and six sand)
For foundation & basement 4679.45 cu.m
In Ground floor 4730.95 cu.m
In First floor 4834.75 cu.m
In Second floor 4938.55 cu.m
In Third floor 5042.35 cu.m
In Fourth floor 5146.15 cu.m
In Fifth floor 5249.95 cu.m
B In Cement Mortar 1:5 (one cement and five sand)
For foundation & basement 4757.00 cu.m
In Ground floor 4730.95 cu.m
In First floor 4834.75 cu.m
In Second floor 4938.55 cu.m
In Third floor 5042.35 cu.m
In Fourth floor 5146.15 cu.m
In Fifth floor 5249.95 cu.m
c In Cement Mortar 1:3 (one cement and three sand)
For foundation & basement 5067.20 cu.m
In Ground floor 5118.70 cu.m
In First floor 5222.50 cu.m
In Second floor 5326.30 cu.m
In Third floor 5430.10 cu.m
In Fourth floor 5533.90 cu.m
24a Country bricks of size 8-3/4" x 4-1/4" x 2-3/4"
A In Cement Mortar 1:6 (one cement and six sand)
For foundation & basement 4533.60 cu.m
In Ground floor 4585.10 cu.m
In First floor 4688.90 cu.m
In Second floor 4792.70 cu.m
In Third floor 4896.50 cu.m
In Fourth floor 5000.30 cu.m
In Fifth floor 5104.10 cu.m
B In Cement Mortar 1:5 (one cement and five sand)
For foundation & basement 4602.80 cu.m
In Ground floor 4654.30 cu.m
In First floor 4758.10 cu.m
In Second floor 4861.90 cu.m
25 II class table moulded chamber burnt bricks of size
9" x 4-1/2" x 3"
A In Cement Mortar 1:6 (one cement and six sand)
For foundation & basement 5531.60 cu.m
In Ground floor 5583.10 cu.m
In First floor 5686.90 cu.m
In Second floor 5790.70 cu.m
In Third floor 5894.50 cu.m
In Fourth floor 5998.30 cu.m
In Fifth floor 6102.10 cu.m
B In Cement Mortar 1:5 (one cement and five sand)
For foundation & basement 5592.50 cu.m
In Ground floor 5644.00 cu.m
In First floor 5747.80 cu.m
In Second floor 5851.60 cu.m
Sl. Rate in
Description Unit
No. rupees
b Dadooing with plain colour glazed tiles of size 150mm x 150mm x 6mm 1018.70 Sq.m
c Dadooing with printed design colour glazed tiles - 150mm x 150mm x 6mm 1090.70 Sq.m
d Dadooing with granite tiles of synthetic grey, paradise, and similar varieties of 1332.20 Sq.m
suitable sizes
e Dadooing with printed design colour glazed tiles of size 300 x 200 x 6mm 1090.80 Sq.m
f Dadooing with printed design colour glazed tiles of size 300 x 450 x 8mm 1047.20 Sq.m
70 Painting new wood work with two finishing coats of synthetic enamel ready 179.80 Sq.m
mixed paint of approved quality and colour over one coat priming coat
71 Painting new iron works
a Primer coat 54.45 Sq.m
b Two coat 107.00 Sq.m
72 Two coat with primer 161.50 Sq.m
73 Polishing the teak wood door with two coats of best French (Lac) 124.95 Sq.m
74 Providing expansion joint in RCC floor slab for 12.5mm width 493.80 Rm
75 Providing expansion joint 12.5mm width in RCC roof slabs between RCC 696.30 Rm
twin beams using PVC water bar of 150mm wide centre bulb of 4mm to
6mm thickness
76 Expansion joint of 12.5mm wide in between RCC twin columns 573.10 Sq.m
77 Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs
of following thickness in RCC 1:2:4
a 25mm thick precast slab using 10mm HBGS jelly 206.60 Sq.m
b 50mm thick precast slab using 20mm HBGS jelly 424.10 Sq.m
c 75mm thick slab (using 20mm HBGS Jelly) 637.25 Sq.m
78 Manufacturing, supplying and fixing in position plain cement concrete precast 549.00 Sq.m
pavement slab of size 450mm x 450mm of 50mm thick
79 Manufacturing, supplying and fixing in position plain cement concrete precast 723.30 Sq.m
kerb slab of size 600mm x 600mm x 100mm
80 Manufacturing, S &F in positon of RCC Jally of 5cm thick 964.65 Sq.m
81 S&F AC sheet roofing with 6mm thick asbestos cement sheets 553.10 Sq.m
82 WATER SUPPLY AND SANITARY ARRANGEMENT ITEMS OF WORK
Supplying, laying and jointing GI pipes of approved quality
I Internal Water Supply - Above Ground Level
a 15 mm dia G.I. Pipe 192.45 Rm
b 20 mm dia G.I. Pipe 223.45 Rm
c 25 mm dia G.I. Pipe 255.10 Rm
d 32 mm dia G.I. Pipe 332.40 Rm
e 40 mm dia G.I. Pipe 348.15 Rm
f 50 mm dia G.I. Pipe 448.75 Rm
h 65 mm dia G.I. Pipe 491.40 Rm
II External Water Supply - Above Ground Level
a 15 mm dia G.I. Pipe 207.95 Rm
b 20 mm dia G.I. Pipe 239.00 Rm
c 25 mm dia G.I. Pipe 270.65 Rm
d 32 mm dia G.I. Pipe 360.75 Rm
e 40 mm dia G.I. Pipe 376.55 Rm
f 50 mm dia G.I. Pipe 487.60 Rm
h 65 mm dia G.I. Pipe 530.25 Rm
External Water Supply - Below Ground Level
a 15 mm dia G.I. Pipe 289.45 Rm
b 20 mm dia G.I. Pipe 317.95 Rm
c 25 mm dia G.I. Pipe 347.05 Rm
d 32 mm dia G.I. Pipe 490.95 Rm
e 40 mm dia G.I. Pipe 502.65 Rm
f 50 mm dia G.I. Pipe 692.45 Rm
h 65 mm dia G.I. Pipe 727.45 Rm
84 Supplying and fixing- of Gun metal Gate Valve / Wheel Valve
I Gate Valve
a 20 mm dia G.M. Gate Valve 591.85 Each
b 25 mm dia G.M. Gate Valve 827.85 Each
c 32 mm dia G.M. Gate Valve 1072.05 Each
d 40 mm dia G.M. Gate Valve 1283.05 Each
e 50 mm dia G.M. Gate Valve 1709.90 Each
f 65 mm dia G.M. Gate Valve 1984.90 Each
II Wheel Valve
Sl. Rate in
Description Unit
No. rupees
a White glazed European Water Closet with 10 litre capacity PVC flushing tank 5030.00 Each
fixed on to wall
b White glazed European Water Closet with 10 litre capacity PVC flushing tank 6461.00 Each
fixed with CI brackets
Sl. Rate in
Description Unit
No. rupees
c Colour glazed European Water Closet with 10 litre capacity PVC flushing tank 5420.00 Each
fixed on to wall
d Colour glazed European Water Closet with 10 litre capacity PVC flushing tank 6851.00 Each
fixed with CI brackets
e White glazed European Water Closet with 12.5 litre capacity porcelin flushing 6669.00 Each
tank fixed on to wall
f White glazed European Water Closet with 12.5 litre capacity procelin flushing 8100.00 Each
tank fixed with CI brackets
g Colour glazed European Water Closet with 12.5 litre capacity porcelin 8369.00 Each
flushing tank fixed on to wall
h Colour glazed European Water Closet with 12.5 litre capacity procelin 9800.00 Each
flushing tank fixed with CI brackets
100 Supply and fixing in position of best Indian make white / colour glazed
earthernware lipped mouth flat back urinal
a White glazed earthernwere lipped mouth flat back urinal 1783.50 Each
b Colour glazed earthernwere lipped mouth flat back urinal 1915.50 Each
101 Supplying and fixing in position Indian make white glazed earthenware 1250.00 Each
squating type urinal
102 Supplying and fixing position CI Nahani Trap / Floor Trap
a Nahani Trap of size 100 x 75mm with stainless steel gratings 627.00 Each
Nahani Trap of size 100 x 75mm with pvc gratings 422.00 Each
Nahani Trap of size 75 x 50mm with stainless steel gratings 568.50 Each
b Nahani Trap of size 75 x 50mm with pvc gratings 403.00 Each
103 Supplying, laying and jointing glazed stone ware pipes - using spun yarn and
cement
a 100mm dia stoneware pipe (cement joint) 226.05 Rm
b 150mm dia stoneware pipe (cement joint) 334.05 Rm
104 Supplying, laying and jointing glazed stoneware pipes
a 100mm dia stoneware pipe ( loose joints) 175.85 Rm
b 150mm dia stoneware pipe ( loose joints) 238.50 Rm
105 Supplying and fixing in position 150mm dia stoneware tee 310.20 Each
106 S&F in position 150 x 100mm "P" or "S" stoneware gully trap 750.00 Each
107 Supplying and fixing AC ventilating shaft of 100mm dia 513.80 Each
108 Supplying and fixing PVC ventilating shaft of 110mm dia 892.45 Each
109 Supplying and fixing in position CI manhole covers with CI frames 2184.00 Each
110 Supplying, laying and position best quality Indian cast iron soil / waste pipes
a 150mm dia CI Pipe 1518.60 Rm
b 100mm dia CI Pipe 1110.90 Rm
c 75mm dia CI Pipe 982.50 Rm
111 Supplying and fixing in position following CI specials
A Plain Bend
i 150mm Dia 910.55 Each
ii 100mm Dia 637.55 Each
iii 75mm Dia 577.55 Each
B Bend with Door
i 150mm Dia 994.55 Each
ii 100mm Dia 689.55 Each
iii 75mm Dia 637.55 Each
C Plain TEE
i 150mm Dia 1445.55 Each
ii 100mm Dia 851.55 Each
iii 75mm Dia 701.55 Each
D TEE with Door
i 150mm Dia 1505.55 Each
ii 100mm Dia 923.55 Each
iii 75mm Dia 756.55 Each
Sl. Rate in
Description Unit
No. rupees
112 Supplying and fixing in position best quality PVC soil / waste pipes
a 75mm dia PVC soil / waste pipe 288.35 Rm
b 110mm dia PVC soil / waste pipe 381.35 Rm
c 160mm dia PVC soil / waste pipe 628.05 Rm
113 Supplying and fixing in position PVC specials
A PVC Elbow
1 160mm dia 318.65 Each
2 110mm dia 306.65 Each
3 75mm dia 276.75 Each
B PVC Elbow with Door
1 160mm dia 354.25 Each
2 110mm dia 336.15 Each
3 75mm dia 283.05 Each
C PVC Tee
1 160mm dia 370.95 Each
2 110mm dia 359.85 Each
3 75mm dia 306.65 Each
D PVC Tee with Single Door
1 160mm dia 413.65 Each
2 110mm dia 383.65 Each
3 75mm dia 330.45 Each
E PVC Tee with Double Door
1 160mm dia 465.35 Each
2 110mm dia 448.55 Each
3 75mm dia 359.85 Each
F PVC Bend
1 160mm dia 324.25 Each
2 110mm dia 312.45 Each
3 75mm dia 283.05 Each
G PVC "Y"
1 160mm dia 377.95 Each
2 110mm dia 366.05 Each
3 75mm dia 312.45 Each
H PVC "Y" with Single Door
1 160mm dia 416.85 Each
2 110mm dia 389.85 Each
3 75mm dia 330.45 Each
I PVC "Y" with Double Door
1 160mm dia 494.85 Each
2 110mm dia 460.05 Each
3 75mm dia 371.65 Each
114 S &F PVC 4 way junction plain or with door
Sl. Rate in
Description Unit
No. rupees
E End Cap
a 15 mm Dia 3.50 Each
b 20 mm Dia 4.80 Each
c 25 mm Dia 6.00 Each
d 32 mm Dia 7.30 Each
e 40 mm Dia 11.40 Each
f 50 mm Dia 15.80 Each
F Reducer
a 20 mm x 15 mm 4.80 Each
b 25 mm x 20 mm 5.30 Each
c 32 mm x 25 mm 8.50 Each
d 40 mm x 32 mm 11.40 Each
e 50 mm x 40 mm 19.60 Each
G Reducer Tee
a 20 mm x 15 mm 7.30 Each
b 25 mm x 20 mm 8.50 Each
c 32 mm x 25 mm 12.20 Each
d 40 mm x 32 mm 14.70 Each
e 50 mm x 40 mm 24.50 Each
H Reducer Elbow
a 20 mm x 15 mm 6.00 Each
b 25 mm x 20 mm 7.30 Each
c 32 mm x 25 mm 9.70 Each
d 40 mm x 32 mm 12.20 Each
e 50 mm x 40 mm 18.30 Each
J Jet Nipple
a 25 mm Dia 15.80 Each
b 32 mm Dia 20.70 Each
120 Providing Anti-termite treatment to soil adjecent and under building 95.00 Sqm
DATA
Sl. Qty Description of work Rate Per Amount
No
1 2 3 4 5 6
1 Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish of single leaf
door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed
using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section
101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: 50x44.45x2.50mm
@ 1.292 kg/m ,Bottom rail: 100 x44.45 x 2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m,
Alu Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 Kg/m and necessary
accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides),
locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - 1 No., aluminium tower
bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush
including cost of materials labour charges and power consumption charges required for fabrication including
chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power
drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete.
All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance
with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete.Aluminium sections,and
furniture fittings shall be got approved by the Executive Engineer incharge.
Main Data
27.58 Kgs Alu. Powder coated Section including anodising 307.00 1 kgs 8467.06
charges
0.97 M2 5.50 mm thick glass. 352.00 1 M2 341.44
0.8 M2 12mm thick PLB 1020.00 1 M2 816.00
4.11 Rm PVC felt 7.50 1 Rm 30.83
3.61 Rm Rubber beading 37.25 1 Rm 134.47
1 Set Pivot 146.00 1 set 146.00
1 No. Hydraulic pressed Automatic Door closer 890.00 1 No 890.00
1 No. Nautel locks 251.00 1 No 251.00
1 No. Door stopper 43.80 1 No 43.80
1 No. Alu. Tower bolt 250x12mm 85.50 1 No 85.50
1 No. Alu. Tower bolt 200x12mm 71.90 1 No 71.90
2.10 M2 Labour charges 478.00 1 M2 1003.80
LS For angles, screw, power supply, LS 140.00
dismantling & dadooing.
For Rs. 2.10 / M2 12421.80
Rate Rs. 5915.14 /M2
Say Rate Rs. 5915.00 /M2
Without Automatic Door closure and Pivot but with hinges
Rate as above 12421.80
Deduct for Doorclosure -890.00
Deduct for Pivot -146.00
Add for hinges 100x30m (3Nos. X 58.90) 188.70
for 2.10 M2 11574.50
Rate Rs. 5511.67 /1 M2
Say Rs. 5512.00 /1 M2
With Automatic Door closure and Hinges
Rate as above 12421.80
Deduct for Pivot -146.00
Add for hinges 100x30m (3Nos. X 60.00) 188.70
Rate for 2.10 M2 12464.50
Rate Rs. 5935.48 /1 M2
Say Rs. 5935.00 /1 M2
With Floor spring and Hinges
Rate as above 12421.80
Deduct for Pivot -146.00
Deduct for Doorclosure -890.00
Add for hinges 100x30m (3Nos. X 60.00) 188.70
Add for Floor spring (1x2102) 2035.00
Rate for 2.10 M2 13609.50
Rate Rs. 6480.71 /1 M2
Say Rs. 6481.00 /1 M2
4 Supplying, fabricating and fixing in position of Aluminium anodised Powder Coated of double leaves
door with half panelled with 12mm thick bothside prelaminated partile board at bottom and half
glazed using 5.50mm thick Plain glass at top. The outer frame shall be with aluminium box section
101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section with Vertical & Top rail:
50x44.45x2.50mm@1.292 kg/m Bottom rail: 100x44.45x2.50mm@ 1.974 kg/mLocal rail :
50x44.45x2.5mm @ 1.292 kg/mAlu. Clips: 17.15x17.27x1.50mm @ 0.176 kg/mAlu. Handle: 100x30mm
@ 0.988 kg/m the and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle
for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower
bolts-250x12mm - 2 Nos., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer -
2Nos ., lock-1No., Door stopper with rubber bush including cost of materials, labour charges and power
consumption charges required for fabrication including chipping, dismantling and making hole to the
required extent in RCC column, beam masonry with power drill wherever necessary and redoing the
damaged portion to the original condition after fixing etc. complete.All the Alu. Section are to be
anodised with matt finish under electricaly controlled condition in accordance with IS 1868/1962 for an
average anodic film thickness of 15 microns etc., complete.Aluminium sections,and furniture fittings
shall be got approved by the Executive Engineer incharge.
MAIN DATA
MAIN DATA
2.00 Nos Door stopper with rubber bush 43.80 Each 87.60
1020.00
1.47 M2 Prelaminated MDF board 12mm tk M2 1499.40
352.00
1.79 M2 Glass 5.50mm thick plain M2 630.08
1835.00
1.64 M2 Aluminium Grill 10mm thick M2 3009.40
37.25
6.96 Rm Rubber beading Rm 259.26
7.50
8.22 Rm PVC Felt 6mm thick Rm 61.65
478.00
3.78 M2 Labour Charges M2 1806.84
251.00
1.00 No Lock Novtal for Aluminium door M2 251.00
85.50
2.00 Nos Alu. Tower Bolt 250mmx12mm Each 171.00
71.90
1.00 No Alu. Tower Bolt 200mmx12mm Each 71.90
890.00
2.00 Nos Alu. Hydralic Door closer Each 1780.00
43.80
2.00 Nos Door stopper with rubber bush Each 87.60
62.90
6.00 Nos Alu. Hinges 100x30 Each 377.40
1/2panelled & 1/2 glazed &fixed glazing at one side with top grill
Consider size: 2.70x2.40 m =6.48 m2with fixed
glazing at one side & top and with 10mm thick grill.
Fully paneled
Consider door size : 1.00x2.10 = 2.10 M2
Outer frame
Horizontal 1x1.00 = 0.912
Verticle 2x2.10 = 4.20
11.86 Kg
5.112 x 2.319 kg/m
Shutter frame
Vertical 1x2x2.056x1.292 kg/m 5.31 Kg
Top rail 1x1x0.824x1.292 kg/m 1.06 Kg
Lock rail 1x1x0.824x1.292 kg/m 1.06 Kg
Bottom rail 1x1x0.824x1.974 kg/m 1.63 Kg
Handle 2x0.85x0.988 kg/m 1.68 Kg
Aluminium clips 0.176Kg/m
Shutter Portion (0.824+0.934)2x2x2 14.06 Rm
14.06x0.176 kg/m 2.47 Kg
Total weight of Aluminium 25.08 Kg
Add 10% wastage 2.51 Kg
27.59 Kg
MDF Board 12mm thick
shutter 2x0.824x0.94 1.55 M2
Add 10% wastage 0.16 M2
1.71 M2
PVC felt Shutter both side 2x1x2.056 4.11 Rm
MAIN DATA
27.59 Kg Aluminium Section including anodizing Charges 287.00 Kg 7918.33
1.71 M2 Prelaminated MDF board 12mm tk 1020.00 M2 1744.20
4.11 Rm PVC Felt 6mm thick 7.50 Rm 30.83
2.10 M2 Labour Charges 478.00 M2 1003.80
1.00 No Lock Novtal for Aluminium door 251.00 M2 251.00
1.00 No Alu. Tower Bolt 250mmx12mm 85.50 Each 85.50
1.00 No Alu. Tower Bolt 200mmx12mm 71.90 Each 71.90
1.00 No Alu. Door stopper 43.80 Each 43.80
3.00 Nos Alu. Hinges 100x30 62.90 Each 188.70
1.00 No Automatic Door closer 890.00 Each 890.00
LS Sundries for T.W.plugs screws dismantling Redoing to good 140.00
condition including Power supply etc.
for 2.10 M2 12368.06
Rate/m2 5889.55 /M2
SAY Rs. 5890.00
Without Automatic Door closure
Rate as above 12368.06
Deduct for Doorclosure -890.00
for 2.10 M2 11478.06
Rate Rs. 5465.74 /1 M2
SAY Rs. 5466.00 /1 M2
12 Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish of double leaves
door with fully panelled with 12mm thick bothside prelaminated partile board The outer frame shall be with
aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section with Vertical & Top
rail: 50x44.45x2.50mm@1.292 kg/m, Bottom rail: 100x44.45x2.50mm@ 1.974 kg/mLock rail : 50x44.45x2.5mm
@ 1.292 kg/mAlu. Clips: 17.15x17.27x1.50mm @ 0.176 kg/mAlu. Handle: 100x30mm @ 0.988 kg/m and
necessary accessories such as Alu. clips rubber beading, full length of handles on both sides, lock, furniture fittings
such as, Hinges, Automatic door closer, rubber bush, stopper including cost of materials, labour charges and power
consumption charges required for fabrication including chipping, dismantling and waking hole to the reuired extent
in RCC column, beam masonry with power drill wherever necessary and redoing the damaged portion to the original
condition after fixing etc. complete. All the Alu. sectionare to be anodised with matt finish under electically
contolled condition in accordance with IS 1868/1962 for an average anodic film thickness of 15 microns etc.,
complete.
Fully paneled
Consider door size : 1.20x2.10 = 2.52 M2
Outer frame
Horizontal 1x1.112 = 1.112
Verticle 2x2.10 = 4.20 12.32 Kg
5.312 Rm x 2.319 kg/m
Shutter frame
Vertical 2x2x2.056x1.292 kg/m 10.63 Kg
Top rail 1x2x0.468x1.292 kg/m 1.21 Kg
Lock rail 1x2x0.468x1.292 kg/m 1.21 Kg
Bottom rail 1x2x0.468x1.974 kg/m 1.85 Kg
Handle 2x2x0.505x0.988 kg/m 2.00 Kg
Aluminium clips 0.176Kg/m
Shutter Portion 2x4x2x(0.468+0.934) 22.43 Rm
22.43 x 0.176 Kg/m 3.95 Kg
Total weight of Aluminium 33.16 Kg
Add 10% wastage 3.24 Kg
36.40 Kg
MDF Board 12mm thick shutter B1175 1.76 M2
Add 10% wastage 0.18 M2
1.94 M2
PVC felt Shutter both side 2x2x2.056 8.22 Rm
MAIN DATA
36.40 Kg Aluminium Section including anodizing Charges 287.00 Kg 10446.80
1.94 M2 Prelaminated MDF board 12mm thick 1020.00 M2 1978.80
8.22 Rm PVC Felt 6mm thick 7.50 Rm 61.65
2.52 M2 Labour Charges 478.00 M2 1204.56
1.00 No Lock Novtal for Aluminium door 251.00 M2 251.00
2.00 Nos Alu. Tower Bolt 250mmx12mm 85.50 Each 171.00
1.00 No Alu. Tower Bolt 200mmx12mm 71.90 Each 71.90
2.00 Nos Alu. Door stopper 43.80 Each 87.60
6.00 Nos Alu. Hinges 100x30 62.90 Each 377.40
2.00 Nos Automatic Door closer 890.00 Each 1780.00
LS Sundries for angles screws dismantling Redoing to good 162.00
condition including Power supply etc.
for 2.52 M2 16592.71
Rate/m2 6584.41 /M2
Say Rs. 6584.00 /M2
Without Automatic Door closer
Rate as above 16592.71
Deduct for Doorclosure -1780.00
for 2.52 M2 14812.71
Rate Rs. 5878.06 /1 M2
Rate Rs. 5878.00 /1 M2
13 Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish of single leaf fully glazed Door
shutters with 5.50 mm thick glass. The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m
and Shutter frame made of section with Vertical & Top rail: 50x44.45x2.50mm@1.292 kg/m, Bottom rail: 100x44.45x2.50mm@
1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/mAlu. Clips: 17.15x17.27x1.50mm @ 0.176 kg/mAlu. Handle:
100x30mm @ 0.988 kg/m and necessary accessories such as Alu. clips rubber beading, full length of handles on both sides,
lock, furniture fittings such as, Hinges, Automatic door closer, rubber bush, stopper including cost of materials, labour charges
and power consumption charges required for fabrication including chipping, dismantling and making hole to the reuired extent in
RCC column, beam masonry with power drill wherever necessary and redoing the damaged portion to the original condition after
fixing etc. complete. All the Alu. Section are to be anodised with matt finish under electically contolled condition in accordance
with IS 1868/1962 for an average anodic film thickness of 15 microns etc., complete.
Fully glazed
Consider door size : 1.00x2.10 = 2.10 M2
Outer frame
Horizontal 1x1.00 = 0.912
Verticle 2x2.10 = 4.20 11.86 Kg
5.112 x 2.319 kg/m
Shutter frame
Vertical 1x2x2.056x1.292 kg/m 5.31 Kg
Top rail 1x1x0.824x1.292 kg/m 1.06 Kg
Lock rail 1x1x0.824x1.292 kg/m 1.06 Kg
Bottom rail 1x1x0.824x1.974 kg/m 1.63 Kg
Handle 2 x0.85x0.988 kg/m 1.68 Kg
Aluminium clips 0.176Kg/m
Shutter Portion (0.824+0.934) 2x2x2 14.06 Rm
14.06x0.176 kg/m 2.47 Kg
Total weight of Aluminium 25.08 Kg
Add 10% wastage 2.51 Kg
27.59 Kg
Glass 3 mm thick
shutter 2x0.824x0.94 1.55 M2
Add 20% wastage 0.31 M2
1.86 M2
Rubber beading (0.824+0.934)x2x2 7.03 Rm
PVC felt Shutter both side 2x1x2.056 4.11 Rm
MAIN DATA
27.59 Kg Aluminium Section including anodizing Charges 287.00 Kg 7918.33
1.86 M2 5.50 mm thick glass 352.00 M2 654.72
7.03 Rm Rubber beading 37.25 Rm 261.87
4.11 Rm PVC Felt 6mm thick 7.50 Rm 30.83
2.10 M2 Labour Charges 478.00 M2 1003.80
1.00 No Lock Novtal for Aluminium door 251.00 M2 251.00
1.00 No Alu. Tower Bolt 250mmx12mm 85.50 Each 85.50
1.00 No Alu. Tower Bolt 200mmx12mm 71.90 Each 71.90
1.00 No Alu. Door stopper 43.80 Each 43.80
3.00 Nos Alu. Hinges 100x30 62.90 Each 188.70
1.00 No Automatic Door closer 890.00 Each 890.00
LS Sundries for T.W.plugs screws dismantling Redoing to good 140.00
condition including Power supply etc.
for 2.10 M2 11540.44
Rate/m2 5495.45 /M2
SAY Rs. 5495.00 /M2
Without Automatic Door closure
Rate as above 11540.44
Deduct for Doorclosure -890.00
for 2.10 M2 10650.44
Rate Rs. 5071.64 /1 M2
Rate Rs. 5072.00 /1 M2
14 Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish of Double leaf fully glazed Door
shutters with 5.50 mm thick glass.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m
and Shutter frame made of section with Vertical & Top rail: 50x44.45x2.50mm@1.292 kg/m, Bottom rail: 100x44.45x2.50mm@
1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/mAlu. Clips: 17.15x17.27x1.50mm @ 0.176 kg/mAlu. Handle:
100x30mm @ 0.988 kg/m and necessary accessories such as Alu. clips rubber beading, full length of handles on both sides,
lock, furniture fittings such as, Hinges, Automatic door closer, rubber bush, stopper including cost of materials, labour charges
and power consumption charges required for fabrication including chipping, dismantling and making hole to the reuired extent in
RCC column, beam masonry with power drill wherever necessary and redoing the damaged portion to the original condition after
fixing etc. complete. All the Alu. Section are to be anodised with matt finish under electically contolled condition in accordance
with IS 1868/1962 for an average anodic film thickness of 15 microns etc., complete. Fully
Glazed
MAIN DATA
47.06 Kg Aluminium Section including anodizing Charges 287.00 Kg 13506.22
0.85 M2 Prelaminated MDF board 12mm tk 1020.00 M2 867.00
1.88 M2 Glass 5.50mm thick plain 352.00 M2 661.76
2.07 M2 Aluminium 10mm Grill of size 1835.00 M2 3798.45
11.22 Rm Rubber beading 37.25 Rm 417.95
8.22 Rm PVC Felt 6mm thick 7.50 Rm 61.65
3.60 M2 Labour Charges 478.00 M2 1720.80
1.00 No Lock Novtal for Aluminium door 251.00 M2 251.00
2.00 Nos Alu. Tower Bolt 250mmx12mm 85.50 Each 171.00
1.00 No Alu. Tower Bolt 200mmx12mm 71.90 Each 71.90
2.00 Nos Aluminium door stopper 43.80 Each 87.60
2.00 Nos Hyd. Door closer 890.00 Each 1780.00
6.00 Nos Alu. Hinges 100x30 62.90 Each 377.40
LS Sundries for Angles T.W.plugs screws dismantling 162.00
Redoing to good condition including Power supply etc.
1/2 panelled 1/2 glazed with top fixed glazing with grill
Consider door size : 1.50x2.40 = 3.60m2 with top
fixed glazing & Aluminium grill.
Outer frame :
Horizontal 2x1.412 2.824 m
Vertical 2x2.40 4.80 m
7.624
Weight 7.624m x 2.319 kg/m 17.68 Kg
Fixed ventilator @ 63.50x38x3mm @ 1.72kg/m
Inner frame V = 0.212x1.72 kg/m 0.37 kg
Shutter frame
Vertical 2x2x2.10x1.292 kg/m 10.85 kg
Top rail 1x2x0.618x1.292 kg/m 1.60 kg
Lock rail 1x2x0.618x1.292 kg/m 1.60 kg
Bottom rail 1x2x0.618x1.974 kg/m 2.44 kg
Handle 2x2x0.645x0.988 kg/m 2.55 Kg
Aluminium clips
Shutter panel section 2x2x2x(0.618+0.97) 12.70
Glass portion 2x2x2x(0.618+0.99) 12.86
Fixed ventilator 2x2x2x(0.684+0.212) 7.17
32.73 Rm
Weight 32.73 x 0.176 kg/m 5.76 Kg
Total weight of aluminium shutter 42.85 Kg
Add 10% wastage 4.29
47.14 Kg
PLMDF Board 12mm thick
Bottom 2x0.618x0.97 1.20
Add 10% wastage 0.12
1.32 M2
Aluminium Grill
Shutter glazing 2x0.618x0.99 1.22
For Fixed ventilator 2x0.684x0.212 0.29
1.51 M2
Add 10% wastage 0.15
1.66 M2
Glass 5.50mm thick plain
Shutter Top 2x0.618x0.99 1.22
Fixed ventilator 2x0.684x0.212 0.29
1.51
Add 20% wastage 0.30
1.81 M2
Rubber beading
Shutter Top 2x2x(0.618+0.99) 6.43 Rm
Fixed ventilator 2x2x(0.684+0.212) 3.58 Rm
10.01 Rm
PVC felt
Shutter both side 2x2x2.056 8.22 Rm
MAIN DATA
47.14 Kg Aluminium Section including anodizing Charges 287.00 Kg 13529.18
LS Sundries for angles T.W.plugs screws dismantling Redoing to good condition 162.00
including Power supply etc.
for 3.60 M2 23615.02
Rate/m2 6559.73 /M2
Say Rs. 6560.00 /M2
18 Fabricting Supplying and fixing in position Aluminium anodised Natural color Matt finish door of size
1.80mx2.40m having fixed ventilator at top of size 1.80x0.30m double leaves openable shutter 1/3 panelled
with12mm thick best quality both sides prelaminated particle board& 2/3 glazed with 5.5mm thick plain glass
with 10mm thick aluminium grill. The outer frame shall be with aluminium box section 101.60x44.45x3.18m at
2.319kg/m and with the Shutter frame made of Vertical & Top rail: 50x44.45x2.50mm@1.292 kg/m, Bottom rail:
100x44.45x2.50mm@ 1.974 kg/m,Lock rail : 50x44.45x2.5mm @ 1.292 kg/m,Alu. Clips: 17.15x17.27x1.50mm @
0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 kg/m and Inner Frame of section 63.50x38x3 mm@1.72 kg/m and
necessary accessories such as rubber beading, PVC felt, handle for a length of shutter (both sides), locking
arrangements, furniture fittings such as aluminium tower bolts-250x12mm - 2Nos, aluminium tower bolt 200x12mm
- 1No, aluminium door stopper with rubber bush - 2Nos ., lock-1No.,Hydraulic floor spring as per BIS standards
including cost of all materials, labour charges and power consumption charges with required aluminum hinges, door
stopper with following sectional specifications and the following shutter frames and necessary accessories such as
aluminium clips, rubber beading PVC felt, handle for a length of shutter (both sides), locking arrangements,
furniture fittings such as aluminium tower bolts-250x12mm - 2Nos, aluminium tower bolt 200x12mm - 1No,
aluminium door stopper with rubber bush - 2Nos ., lock-1No.,Hydraulic Floor spring as per BIS standards including
cost of all materials, labour charges and power consumption charges required for fabrication including chipping
dismantling and making holes to the required extent in RCC in column/beam/masonry with power drill wherever
neccessary and redoing the damaged portion to the original condition after fixing etc. complete. All Aluminium
section shall be used in electrically ontrolled condition in accordance with IS 1868/1962 for an average anodic film
thickness of 15 microns etc., complete.
1/3 panelled 2/3 glazed with top fixed glazing with grill
Door size : 1.80mx2.40m = 4.32M2 with top ventilator
fixed glazing and aluminium grill.
Outer Frame :101.60x44.50x3.18mm @ 2.319kg/m
Outer frame :
Horizontal 2x1.712 3.424 m
Vertical 2x2.40 4.80 m
8.224 Rm
Wieght 8.224x 2.319 kg/m 19.07 Kg
Fixed ventilator @ 63.50x38x3mm @ 1.72kg/m
Inner frame V = 0.212x1.72 kg/m 0.36 kg
Shutter frame
Vertical 2x2x2.10x1.292 kg/m 10.85 Kg
Top rail 1x2x0.768x1.292 kg/m 1.98 Kg
Lock rail 1x2x0768x1.292 kg/m 1.98 Kg
Bottom rail 1x2x0.768x1.974 kg/m 3.03 Kg
Handle 2x2x0.645x0.988 kg/m 2.55 Kg
Aluminium clips @ .176 kg/m
Shutter panel section 2x2x2x(0.768+0.622) 11.12
Glass portion 2x2x2x(0.768+1.29) 16.46
Fixed ventilator 2x2x2x(0.818+0.212) 8.24
35.82 Rm
Wieght 35.82 x 0.176 kg/m 6.30 Kg
Total weight of aluminium shutter 46.14 Kg
Add 10% wastage 4.61
50.75 Kg
PLMDF Board 12mm thick
Bottom 1/3portion 2x0.768x0.622 0.96
Add 10% wastage 0.10
1.06 M2
Glass 5.50mm thick plain
2.33 M2
2.80 M2
2.33
2.56 M2
Rubber beading
12.35 Rm
PVC felt
Shutter both side 2x2x2.056 8.22 Rm
MAIN DATA
Shutter frame
Rate/m2 4204.18
Shutter :
Vertical : 2x2x1.225 4.90
Horizontal : 2x2x0.533 2.13
7.03 Rm
7.02Rmx0.525kg/m 3.69 Kg
Aluminium clips =
2x2x2(0.533+1.225)=14.06Rmx0.109 Kg/m 1.53 Kg
Total 8.87 Kg
Add 10% wastage 0.90 Kg
9.77 Kg
4mm thick Plain Glass
1x2(0.53x1.225) 1.31 M2
Add 20% wastage 0.26 M2
1.57 M2
Rubber beading
2x1x2(0.53+1.225) 7.03 Rm
MAIN DATA
9.77 Kg Aluminium Section including anodizing Charges 287.00 Kg 2803.99
1.57 M2 4mm thick Glass required 298.00 M2 467.86
7.03 Rm Rubber beading 28.40 Rm 199.65
1.56 M2 Labour Charges 478.00 M2 745.68
4.00 Nos Alu. Tower Bolt 100mmx10mm 49.80 Each 199.20
2.00 Nos Alu. Handle 100mm long 30.90 Each 61.80
4.00 Nos Special Hinges 100x30 62.90 Each 251.60
LS Sundries for angles screws dismantling Redoing to 110.00
good condition including Power supply etc.
for 1.56 M2 4839.78
Rate/m2 3102.42
Say Rs. 3102.00 M2
2 Fabricating Supplying and fixing in position of Aluminium anodized natural colour matt finish two panels
openable type window with Aluminium grill of 10mm thick in all floors with aluminium sections of Outer
frame: 37.70x33x2mm @ 0.50 kg/m,Centre mullions:59x33x2.50mm @0.936 kg/m,Shutter frame : Z section
24.50x33x3mm @ 0.525kg/m,Aluminium clips:0.109 kg/m and with neccessary accssories such as rubber
beadings, special hinges, handle including supplying and fixing 4mm thick plain glass including cost of all
materials, labours, power consumption required for fabrication, drilling holes in RCC column slab, masonry
walls wherever necessary with power drills to the required extent and make good to the original conditons
after fixing and also as directed. All the Aluminium sections are to the anodised with matt finish under
electrically controlled conditons in accordance with Is 1868/1962 for an average anodic film thickness of 15
microns etc.Complete.
Total 8.87 Kg
Add 10% wastage 0.90 Kg
9.77 Kg
4mm thick Plain Glass
1x2(0.53x1.225) 1.31 M2
Add 20% wastage 0.26 M2
1.57 M2
Rubber beading
2x1x2(0.53+1.225) 7.03 Rm
Alu. Grill of 10mm thick
2x0.533x1.225 1.31 M2
Add 10% wastage 0.13 M2
1.44 M2
MAIN DATA
9.77 Kg Aluminium Section including anodizing Charges 287.00 Kg 2803.99
1.57 M2 4mm thick Glass required 298.00 M2 467.86
7.03 Rm Rubber beading 28.40 Rm 199.65
1.56 M2 Labour Charges 478.00 M2 745.68
4.00 Nos Alu. Tower Bolt 100mmx10mm 49.80 Each 199.20
2.00 Nos Alu. Handle 100mm long 30.90 Each 61.80
4.00 Nos Special Hinges 100x30 62.90 Each 251.60
1.44 M2 Aluminium grill 10mm thick 1835.00 M2 2642.40
LS Sundries for angles screws dismantling Redoing to 120.00
good condition including Power supply etc.for 1.56 M2 7492.18
Rate/m2 4802.68
Say Rs. 4803.00 M2
3 Fabricating Supplying and fixing in position of Aluminium anodized natural colour matt finish Two Panels
openable type window with fixed Ventilator at Top at 0.30 m height in all floors with aluminium sections of
Outer frame: 37.70x33x2mm @ 0.50 kg/m,Centre mullions: 59x33x2.50mm @0.936 kg/m,Shutter frame : Z section
24.50x33x3mm @ 0.525kg/m,Aluminium clips:0.109 kg/m and with neccessary accssories such as rubber beadings,
special hinges, handle including supplying and fixing 4mm thick plain glass including cost of all materials, labours,
power consumption required for fabrication, drilling holes in RCC column slab, masonry walls wherever necessary
with power drills to the required extent and make good to the original conditons after fixing and also as directed. All
the Aluminium sections are to the anodised with matt finish under electrically controlled conditons in accordance
with Is 1868/1962 for an average anodic film thickness of 15 microns etc complete.
MAIN DATA
Rate/m2 4791.15
5.60x0.50 2.80 Kg
1x2x1.225 2.45
2.45x0.936kg/m 2.29 Kg
Total 12.38 Kg
13.62 Kg
1.80 M2
Rubber beading
1.65 M2
MAIN DATA
Rate/m2 4914.06
Rate/m2 3361.36
Say Rs. 3361.00 /M2
6 Fabricating Supplying and fixing in position of Aluminium anodized natural colour matt finish Openable type glass
window (3 leaves) with fixed glazing at top to a height of 0.3m with alminium grill for glazed portion in all
floors having the Aluminium section such as outer frame of section (418/code) of 37.70x33mmx2mm @ 0.50kg/m,
center mullions of (code 9153,2.50mm thick) 59x33x2.5mm @ 0.936kg/m,Z section of having 24.00mm vertical
and width of 33mm @2.50mm thick.Confirming to code No 4152@0.525kg/m Aluminium clips of 3.60 length
having total weight of 0.40kg or 0.109kg/m with neccessary accssories such as rubber beadings, special hinges,
handle including supplying and fixing 4mm thick plain glass including cost of all materials, labours, power
consumption required for fabrication, drilling holes in RCC column slab, masonry walls wherever necessary with
power drills to the required extent and make good to the original conditons after fixing and also as directed. All the
Aluminium sections are to the anodised with matt finish under electrically controlled conditons in accordance with Is
1868/1962 for an average anodic film thickness of 15 microns etc.Complete.
Rate/m2 4871.00
for 1 M2 7983.70
Rate/m2 3326.54
Outer frame
6.20x0.50kg/m 3.10 Kg
1x3x1.225 kg/m
Total 15.99 Kg
17.59 Kg
Rate/m2 5110.66
for 1 M2 8344.00
Rate/m2 3565.81
2.18 M2
MAIN DATA
Rate/m2 5034.19
4.55 Kg
Wastage @ 10% 0.46 Kg
5.01 Kg
8mm thick PLB = (0.419x0.622)x2 0.52 M2
Wastage @ 10% 0.05 M2
0.57 M2
Main Data
5.01 Kgs Alu. Section 287.00 1 kgs 1437.87
MAIN DATA
14.76 Kg Cost of Alu, Section including anodised 287.00 Kg 4236.12
10.43 Rm Rubber Beading 28.40 Rm 296.21
2.16 M2 Glass 4mm thick plain 298.00 M2 643.68
1.95 M2 Labour charges 478.00 Rm 932.10
6 Nos Roller 13.75 Nos 82.50
2 Nos Lock 62.80 Nos 125.60
3 Nos Handle 100 mm long 30.90 92.70
LS Screws Rayal Plugs and stopper etc. LS 110.00
for 1.95 M2 6518.91
Rate/m2 3343.03 /M2
Say Rs. 3343.00 /M2
12 Supplying , fabricating and fixing in position Aluminium Anodised natural colour mat finish Four track
sliding window in all floors with Aluminium sections of outer frame Bottom Track 92.34x46.00x1.50@1.637
kg/m,Top & vertical 92.34x29.70x1.50 at 1.066 kg/m,and Shutter Vertical 39x20x1.50 at 0.493 kg/m,
Top&Bottom 18x36.6x1.50at0.439 kg/m, Vertical locking arrangement 28.94x39x1.50at0.632 kg/m with
necessary accessories such as rubber beadings, special hinges, lock, handle including supplying and fixing
4mm thick plain glass including cost of all materials , labours, power consumption required for fabrication ,
drilling holes in RCC colunm, slab, masonry walls wherever necessary with power drills to the required extent
and make good to the original condition after fixing and also as directed.The aluminium sections are to be
anodised with matt finish under electrically controlled in accordance with IS 1868 / 1962 for an average
anodic film thickness 15 microns etc., complete.
MAIN DATA
14.76 Kg Cost of Alu, Section including anodised 287.00 Kg 4236.12
10.43 Rm Rubber Beading 28.40 Rm 296.21
2.16 M2 Glass 4mm thick plain 298.00 M2 643.68
1.95 M2 Labour charges 478.00 Rm 932.10
6 Nos Roller 13.75 Nos 82.50
2 Nos Lock 62.80 Nos 125.60
3 Nos Handle 100 mm long 30.90 Nos 92.70
LS Screws Rayal Plugs and stopper etc. LS 110.00
for 1.95 M2 6518.91
Rate/m2 3343.03 /M2
Say Rs. 3343.00 /M2
8 Supplying , fabricating and fixing in position Aluminium Anodised natural colour mat finish Four track
sliding window in all floors with Aluminium sections of outer frame Bottom Track 92.34x46.00x1.50@1.637
kg/m,Top & vertical 92.34x29.70x1.50 at 1.066 kg/m,and Shutter Vertical 39x20x1.50 at 0.493 kg/m,
Top&Bottom 18x36.6x1.50at0.439 kg/m, Vertical locking arrangement 28.94x39x1.50at0.632 kg/m with
necessary accessories such as rubber beadings, special hinges, lock, handle including supplying and fixing
4mm thick plain glass including cost of all materials , labours, power consumption required for fabrication ,
drilling holes in RCC colunm, slab, masonry walls wherever necessary with power drills to the required extent
and make good to the original condition after fixing and also as directed.The aluminium sections are to be
anodised with matt finish under electrically controlled in accordance with IS 1868 / 1962 for an average
anodic film thickness 15 microns etc., complete.
Rate/m2 4871.00
For 1 m2 3326.54
Rate/m2 3327.00
10 Fabricating Supplying and fixing in position of Aluminium anodized natural colour matt finish Three panels
openable type window wth Aluminium Grill 10 mm thick in all floors with aluminium sections ofOuter frame:
37.70x33x2mm @ 0.50 kg/m, Centre mullions:59x33x2.50mm @0.936 kg/m,Shutter frame : Z section
24.50x33x3mm @ 0.525kg/m,Aluminium clips:0.109 kg/m with neccessary accssories such as rubber beadings,
special hinges, handle including supplying and fixing 4mm thick plain glass including cost of all materials, labours,
power consumption required for fabrication, drilling holes in RCC column slab, masonry walls wherever necessary
with power drills to the required extent and make good to the original conditons after fixing and also as directed. All
the Aluminium sections are to the anodised with matt finish under electrically controlled conditons in accordance
with Is 1868/1962 for an average anodic film thickness of 15 microns etc.Complete.
5.60x0.50 2.80 Kg
1x2x1.225 2.45
2.45x0.936kg/m 2.29 Kg
Total 12.38 Kg
13.62 Kg
1.80 M2
Rubber beading
1.65 M2
MAIN DATA
6.80
6.213
12.75
FG 2x4x2(0.365+0.267) 10.11
35.61 M
Total 19.79 Kg
FG 1x4x0.335x0.267 0.39
2.18 M2
2.62 M2
Rubber beading
Shutter 2x4(1.225+0.365) 12.75
FG 2x4(0.365+0.267) 5.06
17.81 Rm
Alu.Grill of 10mm thick
For shutter : 4x1.225x0.365 1.79 M2
Fixed grill : 4x0.365x0.267 0.39 M2
2.18 M2
Add 10% wastage 0.22 M2
2.40 M2
MAIN DATA
Rate/m2 5034.19
Rate/m2 3505.03
Say Rs. 3505.00 /M2
12 Supplying fabricating and fixing in position of Aluminium anodized natural colour matt finish openable
type glass window Four leaves in all floors having the following Aluminium section such as outer
frame of section (418/code) of 37.70x33mmx2mm @ 0.50kg/m, central mullions of (code 9153,2.50mm
thick) 59x33x2.5mm @ 0.936kg/m,Z section of having 21mm 24.50mm vertical and width of 33mm
@2.50mm thick.Confirming to code No 4152@0.525kg/m Aluminium clips of 3.60 length having total
weight of 0.40kg or 0.109kg/m.with neccessary accssories such as rubber beadings, special hinges,
handle including supplying and fixing 4mm thick plain glass including cost of all materials, labours,
power consumption required for fabrication, drilling holes in RCC column slab, masonry walls wherever
necessary with power drills to the required extent and make good to the original conditons after fixing
and also as directed. All the Aluminium sections are to the anodised with matt finish under electrically
controlled conditons in accordance with Is 1868/1962 for an average anodic film thickness of 15 microns
etc.Complete.
Outer frame
6.20x0.50kg/m 3.10 Kg
Total 15.99 Kg
17.59 Kg
2.15 M2
Rubber beading
1.97 M2
MAIN DATA
17.59 Kg Aluminium Section including anodizing Charges 287.00 Kg 5048.33
Rate/m2 5110.66
for 1 M2 8344.00
Rate/m2 3565.81
Say Rs. 3566.00 /1 M2
ALUMINIUM VENTILATOR
1 Supplying, fabricating and fixing inposition Aluminium anodised natural colour matt finish louvered
ventilator size 600mm x 600 mmof with outer frame section with 62x38x2mm at 1.174 kg/m and the
louvered with moving arrangements made with aluminium channel of size 60x30x4mm @ 1.274 kg/m
ALuminium clips 19.05x17.27/ 11.05x0.075mm @ 0.169kg/m with necessary 4mm thick plain glass
panel for louvers including cost of all materials, labour and power required for fabrications, chipping
dismantling making holes in RCC, masonry and made good to the original condition after fixing etc.,
complete. The Aluminium surface is to be anodised with matt finish under electrically controlled
condition in accordance with ISI specification 1868/1962 for anodic film thickness of notless than 15
Microns,etc., complete.
outer frame
Louvered section
Main Data
7.69 Kgs Alu. Section incl. anodising charges 287.00 1 kgs 2207.03
Rate/m2 5040.87
ALUMINIUM PARTITION
1 Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed
glazing 2/3rd prelaminated board of Aluminium partition. The outer frames Outer frame:
63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm
@ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with
5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and
with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever
in necessary with power drills to the extent required and made good the damaged portion in good condition
after fixing as directed by the departmental officers. All the aluminium sections should be anodised not less
than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before
use.
outer frame
9.60
10.56 kg
2.04 m2
Main Data
4 Supplying, fabricating and fixing inposition Aluminium glazed fixed partition using 63.50x38.10x2mm
@1.127 kg/m Alu.section at 900mm C/C in vertical direction and 1300mm @ C/C at horizontal direction
with necessary rubber beadings Alu. clips, of size 17.27x17.15x1.40mm@ 0.175 kg/m and using 4mm
thick plain glass including cost of all materilas, labours, power consumptions required for fabrications,
drilling holes in RCC column, slab, masonry walls wherever necessary with powerdrills to the required
extent and make good to the original condition after fixing and also as directed . All the aluminium
sections are to be anodised with matt finish under electrically controlled conditions in accordance with IS
1868/1962 for an avereage abiduc film thickness of 15 microns etc. complete.
outer frame
16.29
17.92 kg
3.71
Main Data
1 Supplying, fabricating and fixing in position of Aluminium Natural Colour Mat finilsh Fixed Glazing the
glass used shall be of 5 mm thickness. The Aluminium Section are to be anodised under electrically
controlled condition as per IS 1868/1962 for an anodic film thickness of 15 microns. All the materials
should be got approved by got approved by the Executive Engineer before execution of works.
Outer Frame:
Vertical=1x2.10 2.10
5.10
inner Frame:
Vertical=2x2.056 4.11
5.73
5.73x1.72 9.86kg
Alu. Clips:
2x2x2(0.405+0.928) 10.66
10.664x0.176 1.88kg
Total 23.57kg
25.93 kg
2x(0.405x0.928) 0.75 M2
10 mm thick grill
2x(0.405x0.928) 0.75 M2
0.83 M2
Rubber beading:
5.33
Main Data
11038.83
For 3.15M2 3504.39
1 Supplying and fixing in position of aluminium handrails anodised matt natural finish c type section of
size 70x30x3 mm thick at 1.527 kg/m with all alu. Strip section No.5126 of 37 mm with 0.227 kg/m
inclulding balustrades square section of size 25.40x25.40x1.50mm thick at 0.442 kg/m to a height
800mm from the finish floor level at step nesing fixed at 150mm intervals iln the two numbers for each
step with necessary screws plugs etc. including providing holes iln the RCC masonry steps landing or
floor and also fixing the aluminium depth and grouted with cement and redoing the damaged portion as
original condition.
3274.73
0.0510424155
13.475198
13.464
19.5915492958
0.1
10
0.053788
25.7164 14.256
13.91
9.737
11.128
12.519
168.3
51
9322.45
9364.45
9517.45
LS 0.00
23.24
`
3.15
3.6
4.32
8.1095
239.8
261.648
252.912
239.8095
DATA
Sl. Qty Description of work
No Rate Per Amount
1 2 3 4 5 6
1 Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are
used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat
is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact.
M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners
with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and
6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section
spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the
bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf
door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the
inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the
door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter
t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the
frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer
as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of
work, loading, un loading and all other incidental charges etc., complete.
Outer frame
5.20 M
Shutter frame
6.16 M
6.16mx2.60 kg 16.02 kg
1.50 kg
1No.x1.00x1.50kg/m
Lock rail for fixing aldrop in MS flat 32x6mm
1x0.988x1.50kg 1.482 kg
1x0.988x3x0.70kg 2.08 kg
Diagonal
1x1.21x6x0.70kg 5.08 kg
46.58 kg
1x0988x2.088x9.80kg
20.22 kg
Add 5% wastage 1.01 kg
21.23 kg
Main Data
46.58 kg Ms Angle & Flats 41.20 Each 1919.10
64.58 kg Labour for cutting sheets, angles fabrication & finishing 33.40 Each 2156.97
1.00 Nos Tower Bolt250mm long 12mm dia 85.50 Each 85.50
1.00 Nos Tower Bolt200mm long 12mm dia 71.90 Each 71.90
2.10 Labour for fixing the Door & furniture fittings 149.00 Each 312.90
M2
L.S. Conveyance, Handling, Scaffolding, Chipping/Masonary concerete & making
good the damaged portion L.S. 210.00
2 Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are
used for the outer frames and M.S. angles of size 35x35x6mm for the shutter frames stiffeners with 32 x 6mm M.S flat
is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact.
M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners
with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and
6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section
spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the
bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf
door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the
inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the
door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter
t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the
frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer
as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of
work, loading, un loading and all other incidental charges etc., complete.
Double leaf Door size 1.5 X 2.1M ( 1/3 panneled& 2/3 grilled) 3.15 m2
Materials required
Outer frame 40x40x6mm
Vertical 1x2x2.1 4.20 m
Horizontal 1x1x1.50 1.50
5.7x3.5Kg/m 19.95 Kg
Shutter frame 35x35x5mm
Vertical 1x2x2x2.088 = 8.35 Kg
Horizontal 2x2x0.744 2.98 Kg
11.33x2.6Kg/m 29.46 Kg
Intermediate J Section in betn Grill & CR sheet 2x0.744x2.28Kg 3.39 Kg
Tie bar 32x6mm flat 1x1.5x1.5Kg 2.25 Kg
Stiffeners 18x 5 mm MS flat at rear side Kg
Horizontal 2x1x0.744x0.7 Kg 1.04 Kg
Diagonal 2x2x0.821x0.7 Kg 2.30 Kg
MS flat 32x3mm@ edge of CR Sheet 1x.7x1.1KG 0.77 Kg
Total 59.16 Kg
Add 5% wastage 2.96 Kg
62.12
CR Sheet reqd. 1x2x0.74x0.7x9.8 Kg/m2 10.19 kg
Add 5% wastage 0.51 kg
10.70 kg
MS grill of 20kg/m2 1x2x0.744x1.4x20kg/m2 41.60 kg
Add 5% wastage 2.08 kg
43.68 kg
Painting Red oxide primer 1.5x2.1=3.15m2-2.08m2 1.07 M2
1.07x2.2 2.35 M2
Main Data
62.12 kg MS angles & Flats 41.20 kg 2559.34
10.70 kg CR sheet18 gauge 41.20 kg 440.84
43.68 kg MS grill of appd design 20kg/m2 includingfabrication charges 75.40 kg 3293.47
69.35 Kg Labour charges for cutting welding and fabrication
of angles sheets in position & fixing 33.40 kg 2316.29
2.35 M2 Priming coat 54.50 M2 128.08
6 Nos Hold Fasts 200mm length 67.30 Each 403.80
4 Nos Hinges 125mmx30mm 78.40 Each 313.60
2 Nos Tower Bolt250mm long 12mm dia 85.50 Each 171.00
1 Nos Tower Bolt200mm long 12mm dia 71.90 Each 71.90
1 No Aldrop 250mm long 16mm dia 158.20 Each 158.20
2 Nos Ms Handle 200mm long 56.20 Each 112.40
3.15 M2 labour charges for fixing door 149.00 M2 469.35
LS Conveyance,Handling,Scaffolding,Chipping
masonry,concrete etc& redoing the same LS LS 140.00
For 3.15M2 10578.27
Rate Rs. 3358.18 /M2
SAY Rate Rs. 3358.00
5 Manufacturing, supplying and fixing of steel doors with the following specification M.S angles of a size 40x40x6mm
are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32x6mm M.S.
flat is provided at required intervals in the shutter frames 18 gauge C.R. sheet is laid as panel in the shutter and welded
intact for 1/3 bottom portion of the shutter. M.S. flat 18x5mm is welded over the 32x6mm M.S. flat sand witching
the CR sheet in between. Additional stiffener with 18x5mm M.S. flat is provided diagonally at the rear side of the
shutter. The balance 2/3 portion at top is provided with grill at an average weight of 20kg/sq.m with 3mm pin
headed glass used for glazing and fixed with 15x12 mm teakwood beeding and 6 Nos hinges for double leaves
shutter to be provided 6nos of oldfasts 120mm in length made of angle section spliced at the ends are welded to the
outer frame of the door. Tower bolts 2nos. one at top and the other at the bottom arte provided one aldrop is provided
at on appropriate place in the door. A Tie bar is provided at the bottom of the outer frame to prevent twisting of frame
during transportation or fixing. All members are given one coat of red oxide primer as directed by the departmental
officers. The rate includes cost of all meterials, labour charges,taxes, transportation to site of work , loading,
unloading and all other incidental charges etc.,complete.
Double leaf Door size 1.5 X 2.1M (1/3 panneled& 2/3 grilled with glazing) 3.15 m2
Materials required
5.7x3.5Kg/m 19.95 Kg
Shutter frame 35x35x5mm
Vertical 1x2x2x2.088 =
8.35 M
Horizontal 2x2x0.744
2.98 M
11.33x2.6Kg/m 29.46 Kg
Intermediate J Section in betn Grill & CR sheet
2x0.744x2.28Kg 3.39 Kg
Tie bar 32x6mm flat 1x1.5x1.5Kg
2.25 Kg
Stiffeners 18x 5 mm MS flat at rear side
Total 59.16 Kg
62.12 Kg
CR Sheet reqd. 1x2x0.74x0.7x9.8 Kg/m2
10.19 kg
10.70 kg
MS grill of 20kg/m2 1x2x0.744x1.4x20kg/m2 41.60 kg
43.68 kg
Painting Red oxide primer 1.5x2.1=3.15m2-2.08m2 1.07 M2
1.07x2.2 2.35 M2
2.29 M2
Single leaf: (1/3 panneled & 2/3 grilledwith top ventilator glazing))
Area 1.50 x 2.40 = 3.60 M2(1/3 panneled& 2/3 grilled with top ventilator glazing)
6.30x3.5Kg/m 22.05 Kg
Shutter frame 35x35x5mm
Vertical 2x2x2.06 8.24
70.87 Kg
CR Sheet 18G reqd. 1x2x0.71x0.7x9.8 Kg/m2
9.74 Kg
Main Data
7 Fabricating, supplying and fixing of steel Emergency exitdoor cum, emergency window with the following
specification. M.S. angle in size 40x40x6mm are used for the outer frames and M.S. angle of sie 35x35x5mm for the
shutter frame, stiffners with 32x6mm M.S. flats provided at required intervals in the shutter frames 18 guage CR sheet
is laid as panel and welded instant for 1/3 bottom portion of the shutter, M.S. flat 18x5mm is welded over the 32x6mm
M.S flat sandwitching the CR sheet in between additional stiffner with 18x5mm M.S. flat is provided diagonally at the
rear-side of the shutter. The balance 2/3 portion at top is provided with grill at an average weight of 15kg/m2 and the
top portion of operation emergency window is to be made of 25x25x3mm M.S. angle welded intact with CR sheet and
25x3mm M.S. flat at diagonally at the near side of the window at required interwals 6 Nos. of hinges to be provided,6
Nos of holdfast 100mm in length made of angle section spliced at the ends are welded to the outer frame of the door.
Tower bolts 2 Nos. one at top and the other at the bottom are to be provided one aldrop is provided at an appropriate
place in the door 2 Nos. of 'D' type handle for emergency window and 2 Nos of handle for door is to be provided at
appropriate places. A tie bar is provided at the bottom of the outer frame to prevent twisting of frame during
transportation of fixing. All members are given one coat of red oxide primer as directed by the departmental officers.
The rate includes cost of materials, labour transportation to side of works, loading, unloading and all other incidental
charges etc., complete.
B 2095.00
9 Supplying and fixing solid core particle board flush shutter of nominal thick of 35 mm with necessary T.W.
internal lipping conforming to IS 2302 with both sides alround commercial ply 35mm thick including supplying
and fixing cost of wind appliances and furniture fittings such as 1no .200x12mm aluminium tower bolt 2nos.
150x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 nos. 200mm ‘D’ type aluminium door
handle and door stopper with bush etc., complete as directed by the departmental officers.
a) Single leaf:
2.06 m2
solid core particle board flush door shutters with both sides 3mm
2.06 m2 thick commercial ply of 35mm thick with T.W. internal lipping 1650.00 m2 3399.00
(internal alround)
Alu. Furniture
1.87 m2 Labour charges for making the flush door/single 140.00 m2 261.80
1.87 m2 Labour charges for fixing doors with frames 149.00 m2 278.63
Double leaf:
3.18 m2
Main data
solid core particle board flush door shutters with both sides 3mm
3.18 m2 thick commercial ply of 35mm thick with T.W. internal lipping 1650.00 m2 5247.00
(internal alround)
Alu. Furniture
2.89 m2 Labour charges for making the flush door/Double 216.00 m2 624.24
2.89 m2 Labour charges for fixing doors with frames 149.00 m2 430.61
11 Supplying and fixing Solid core Particle board flush shutter of nominal thick of 35 mm with Teak ply on both
sides and with T.W. lipping alround conforming to IS 2302 including supplying and fixing cost of wind
appliances and furniture fittings such as 1no .300 x 12 mm aluminium tower bolt 2 nos. 200x12 mm aluminium tower
bolts 1no. 250 x 16 mm aluminium aldrops, 2 nos. 200mm ‘D’ type aluminium door handle and door stopper with
bush etc., complete as directed by the departmental officers.
Single leaf:
2.06 m2
solid core particle board flush door shutters with both sides 3mm
2.06 m2 thick Teak ply of 35mm thick with T.W. internal lipping (internal 1925.00 m2 3965.50
alround)
Alu. Furniture
1.87 m2 Labour charges for making the flush door/single 140.00 m2 261.80
1.87 m2 Labour charges for fixing doors with frames 149.00 m2 278.63
12 Supplying and fixing solid core particle board flush shutter of nominal thick of 35 mm with necessary T.W.
internal lipping conforming to IS 2302 with both sides alround Teak ply 3mm thick including supplying and
fixing cost of wind appliances and furniture fittings such as 1no .300x12mm aluminium tower bolt 2nos. 200x12mm
aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 nos. 200mm ‘D’ type aluminium door handle and door
stopper with bush etc., complete as directed by the departmental officers.
Double leaf:
3.18 m2
Main data
solid core particle board flush door shutters with both sides 3mm
3.18 m2 thick Teak ply of 35mm thick with T.W. internal lipping (internal 1925.00 m2 6121.50
alround)
Alu. Furniture
2.89 m2 Labour charges for making the flush door/double 216.00 m2 624.24
2.89 m2 Labour charges for fixing doors with frames 149.00 m2 430.61
Conveyance charges, dismantling and redooing to original
LS LS 190.00
position
For 2.89M2 8551.25
Single leaf:
2.06 m2
Main data
2.06 m2 MDF Board 35mm thickof Kiln dried soft wood 2120.00 m2 4367.20
Alu. Furniture
1.87 m2 Labour charges for making the flush door/single 140.00 m2 261.80
Double leaf:
3.18 m2
Requirement for lipping =
11.02 RM
2(2(0.705+2.05))=
Main data
Single leaf:
2.06 m2
Requirement on lipping =2(0.91+2.05)=
5.92 RM
Main data
2.06 m2 MDF Board 35mm thick of Plain Kiln dried soft wood 1730.00 m2 3563.80
Alu. Furniture
3 Nos Alu. Hinges (125mmx30mm)
78.40 Each 235.20
1 No 300x12mm tower bolt
114.10 Each 114.10
1 Nos 200x12 tower bolt
71.90 Each 71.90
1 No Alu. 250x16mm aldrop
158.20 Each 158.20
2 No 200 mm 'D' type handle
56.20 Each 112.40
1 No Door stopper with Rubber bush
43.80 Each 43.80
1.87 m2 Labour charges for making the flush door/single
140.00 m2 261.80
1.87 m2 Labour charges for fixing with frames
149.00 m2 278.63
LS LS for Screws, nails, Dismantling, redoing etc
LS 160.00
For 1.87M2
4999.83
Rate Rs. 2673.71
Say Rs. 2674.00
16 Supplying and fixing door shutters for Medium Density Fibre board of exterior grade, Plain including external
lipping with Kiln dried soft wood of 35mm thick conforming to IS 12406 / 1989 with 35 x 12mm T.W. on all edges
with necessary adhesive and C.P. screws, including fixing of aldrops, tower bolts, hinges and lock strike plates, putty,
fevical, varnish for T.W. lipping with thinner colouring agent etc., The rate includes cost of materials and cost for
aluminium furniture fittings such as 6 nos Alu. hinges 125mm, 1 no Alu. aldrop 250 x 16mm, 2nos Alu. tower bolt of
300x12mm and 1 no Alu. tower bolt of 200x12mm, 3 Nos Alu. Handles, 2 nos door stopper with rubber bush incase
of Single leaf door inclusive of labour charges for fixing in position etc., complete. All Aluminium furniture fittings
are to be anodised with matt finish under electrically controlled condition in accordance with ISI specification
1868/1968 for anodic film thickness of not less than 15 microns, The rate is inclusive cost of fevical and fixing
charges, transportation, loading, unloading and all other incidential charges, handling charges etc., complete
complying with standard specification.
Double leaf:
3.18 m2
Requirement for lipping =
2(2(0.705+2.05))= 11.02 RM
Main data
3.18 m2 MDF Board 35mm thick of Plain Kiln dried soft wood 1730.00 m2 5501.40
Alu. Ane. Furniture
6 Nos Alu. Hinges (125mm) 78.40 Each 470.40
2 No s 300x12mm tower bolt 114.10 Each 228.20
1 Nos 200x12 tower bolt 71.90 Each 71.90
1 No Alu. 250x16mm aldrop 158.20 Each 158.20
3 Nos 200 mm 'D' type handle 56.20 Each 168.60
2 No Door stopper with Rubber bush 43.80 Each 87.60
2.89 m2 Labour charges for making the flush door/Double 216.00 m2 624.24
2.89 m2 Labour charges for fixing with frames 149.00 m2 430.61
LS LS for Screws, nails, Dismantling, redoing etc LS 190.00
For 2.89M2 7931.15
Rate Rs. 2744.34
Say Rs. 2744.00
17 Supplying and fixing door shutters for Medium Density Fibre board of exterior grade, Plain including external
lipping with Kiln dried soft wood of 30 mm thick conforming to IS 12406 / 1989 with necessary adhesive and C.P.
screws, including fixing of aldrops, tower bolts, hinges and lock strike plates, putty, fevical, varnish for T.W. lipping
with thinner colouring agent etc., The rate includes cost of materials and cost for aluminium furniture fittings such as
3 nos Alu. hinges 125mm, 1 no Alu. aldrop 250 x 16mm, 1no Alu. tower bolt of 300x12mm and 1 no Alu. tower bolt
of 200x12mm, 2 Nos Alu. Handles, 1 no door stopper with rubber bush incase of Single leaf door inclusive of labour
charges for fixing in position etc., complete. All Aluminium furniture fittings are to be anodised with matt finish under
electrically controlled condition in accordance with ISI specification 1868/1968 for anodic film thickness of not less
than 15 microns, The rate is inclusive cost of fevical and fixing charges, transportation, loading, unloading and all
other incidential charges, handling charges etc., complete complying with standard specification.
Single leaf:
Consider a door of size 1.00m x 2.10m 2.10 m2
Shutter size 0.91x2.05 1.87 m2
M.D.F Board = 0.91 x 2.05 1.87 m2
Add 10% Wastage 0.19 m2
2.06 m2
Requirement on lipping =2(0.91+2.05)= 5.92 RM
Main data
Double leaf:
3.18 m2
Requirement for lipping =
2(2(0.705+2.05))= 11.02 RM
Main data
Single leaf:
2.06 m2
Requirement on lipping =2(0.91+2.05)=
5.92 RM
Main data
2.06 m2 MDF Board 35mm thick Plain with Teakwood lipping 1860.00 m2 3831.60
Alu. Furniture
3 Nos Alu. Hinges (125mmx30mm)
78.40 Each 235.20
1 No 300x12mm tower bolt
114.10 Each 114.10
1 Nos 200x12 tower bolt
71.90 Each 71.90
1 No Alu. 250x16mm aldrop
158.20 Each 158.20
2 No 200 mm 'D' type handle
56.20 Each 112.40
1 No Door stopper with Rubber bush
43.80 Each 43.80
1.87 m2 Labour charges for making the flush door/single
140.00 m2 261.80
1.87 m2 Labour charges for fixing with frames
149.00 m2 278.63
LS LS for Screws, nails, Dismantling, redoing etc
LS 160.00
For 1.87M2
5267.63
Rate Rs. 2816.91
Say Rs. 2817.00
20 Supplying and fixing door shutters for Medium Density Fibre board of exterior grade, Plain with Teakwood
external lipping alround of 35 mm thick conforming to IS 12406 / 1989 with 35 x 12mm T.W. on all edges with
necessary adhesive and C.P. screws, including fixing of aldrops, tower bolts, hinges and lock strike plates, putty,
fevical, varnish for T.W. lipping with thinner colouring agent etc., The rate includes cost of materials and cost for
aluminium furniture fittings such as 6 nos Alu. hinges 125mm, 1 no Alu. aldrop 250 x 16mm, 2nos Alu. tower bolt of
300x12mm and 1 no Alu. tower bolt of 200x12mm, 3 Nos Alu. Handles, 2 nos door stopper with rubber bush incase
of Single leaf door inclusive of labour charges for fixing in position etc., complete. All Aluminium furniture fittings
are to be anodised with matt finish under electrically controlled condition in accordance with ISI specification
1868/1968 for anodic film thickness of not less than 15 microns, The rate is inclusive cost of fevical and fixing
charges, transportation, loading, unloading and all other incidential charges, handling charges etc., complete
complying with standard specification.
Double leaf:
3.18 m2
Requirement for lipping =
2(2(0.705+2.05))= 11.02 RM
Main data
3.18 m2 MDF Board 35mm thick Plain with Teakwood lipping
1860.00 m2 5914.80
Alu. Ane. Furniture
6 Nos Alu. Hinges (125mm)
78.40 Each 470.40
2 No s 300x12mm tower bolt
114.10 Each 228.20
1 Nos 200x12 tower bolt
71.90 Each 71.90
1 No Alu. 250x16mm aldrop
158.20 Each 158.20
3 Nos 200 mm 'D' type handle
56.20 Each 168.60
2 No Door stopper with Rubber bush
43.80 Each 87.60
2.89 m2 Labour charges for making the flush door/Double
216.00 m2 624.24
2.89 m2 Labour charges for fixing with frames
149.00 m2 430.61
LS LS for Screws, nails, Dismantling, redoing etc LS 190.00
For 2.89M2 8344.55
Rate Rs. 2887.39
Say Rs. 2887.00
21 Supplying and fixing door shutters for Medium Density Fibre board of exterior grade, Plain with Teakwood
external lipping alround of 30 mm thick conforming to IS 12406 / 1989 with necessary adhesive and C.P. screws,
including fixing of aldrops, tower bolts, hinges and lock strike plates, putty, fevical, varnish for T.W. lipping with
thinner colouring agent etc., The rate includes cost of materials and cost for aluminium furniture fittings such as 3 nos
Alu. hinges 125mm, 1 no Alu. aldrop 250 x 16mm, 1no Alu. tower bolt of 300x12mm and 1 no Alu. tower bolt of
200x12mm, 2 Nos Alu. Handles, 1 no door stopper with rubber bush incase of Single leaf door inclusive of labour
charges for fixing in position etc., complete. All Aluminium furniture fittings are to be anodised with matt finish under
electrically controlled condition in accordance with ISI specification 1868/1968 for anodic film thickness of not less
than 15 microns, The rate is inclusive cost of fevical and fixing charges, transportation, loading, unloading and all
other incidential charges, handling charges etc., complete complying with standard specification.
Single leaf:
Consider a door of size 1.00m x 2.10m
2.10 m2
Shutter size 0.91x2.05
1.87 m2
M.D.F Board = 0.91 x 2.05
1.87 m2
Add 10% Wastage
0.19 m2
2.06 m2
Requirement on lipping =2(0.91+2.05)=
5.92 RM
Main data
2.06 m2 MDF Board 30 mm thick Plain with Teakwood lipping
1650.00 m2 3399.00
Alu. Furniture
3 Nos Alu. Hinges (125mmx30mm) 78.40 Each 235.20
1 No 300x12mm tower bolt 114.10 Each 114.10
1 Nos 200x12 tower bolt 71.90 Each 71.90
1 No Alu. 250x16mm aldrop 158.20 Each 158.20
2 No 200 mm 'D' type handle 56.20 Each 112.40
1 No Door stopper with Rubber bush 43.80 Each 43.80
1.87 m2 Labour charges for making the flush door/single 140.00 m2 261.80
1.87 m2 Labour charges for fixing with frames 149.00 m2 278.63
LS LS for Screws, nails, Dismantling, redoing etc
LS 175.00
For 1.87M2
4850.03
Rate Rs. 2593.60
Say Rs. 2594.00
22 Supplying and fixing door shutters for Medium Density Fibre board of exterior grade, Plain with Teakwood
external lipping alround of 30 mm thick conforming to IS 12406 / 1989 with 35 x 12mm T.W. on all edges with
necessary adhesive and C.P. screws, including fixing of aldrops, tower bolts, hinges and lock strike plates, putty,
fevical, varnish for T.W. lipping with thinner colouring agent etc., The rate includes cost of materials and cost for
aluminium furniture fittings such as 6 nos Alu. hinges 125mm, 1 no Alu. aldrop 250 x 16mm, 2nos Alu. tower bolt of
300x12mm and 1 no Alu. tower bolt of 200x12mm, 3 Nos Alu. Handles, 2 nos door stopper with rubber bush incase
of Single leaf door inclusive of labour charges for fixing in position etc., complete. All Aluminium furniture fittings
are to be anodised with matt finish under electrically controlled condition in accordance with ISI specification
1868/1968 for anodic film thickness of not less than 15 microns, The rate is inclusive cost of fevical and fixing
charges, transportation, loading, unloading and all other incidential charges, handling charges etc., complete
complying with standard specification.
Double leaf:
3.18 m2
Requirement for lipping =
2(2(0.705+2.05))= 11.02 RM
Main data
3.18 m2 MDF Board 30 mm thick Plain with Teakwood lipping 1650.00 m2 5247.00
Alu. Furniture
6 Nos Alu. Hinges (125mm) 78.40 Each 470.40
2 No s 300x12mm tower bolt 114.10 Each 228.20
1 Nos 200x12 tower bolt 71.90 Each 71.90
1 No Alu. 250x16mm aldrop 158.20 Each 158.20
3 Nos 200 mm 'D' type handle 56.20 Each 168.60
2 No Door stopper with Rubber bush 43.80 Each 87.60
2.89 m2 Labour charges for making the flush door/Double 216.00 m2 624.24
2.89 m2 Labour charges for fixing with frames 149.00 m2 430.61
LS LS for Screws, nails, Dismantling, redoing etc LS 200.00
For 2.89M2 7686.75
Rate Rs. 2659.78
Say Rs. 2660.00
23 Supplying and fixing PVC sliding door for Disabled persons toilet in with Solid
PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer
frames, 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be
covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets
for panelling shall rigidly fixed in position including necessary furniture and fittings.
The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock
rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm
x 45mm, with suitable rabate for housing the shutter including slidng arrangements.
2360.00 m2 2926.40
2 Nos PVC Roller
3378.50
Rate Rs.
2145.08
Say Rs.
2145.00
/M2
24 Supplying and fixing PVC sliding door with Solid PVC door shutters using 19 Gauge
19mm MS square tubes for styles and outer frames, 15mm MS square tubes for top,
lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC
sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in
position including necessary furniture and fittings. The over all size of styles shall be
50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm
x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for
housing the shutter including slidng arrangements.
Double leaf Door size 1.8 X 2.1M (1/3 panneled&2/3 grilled) 3.78 m2
Materials required
Outer frame 40x40x6mm
Vertical 1x2x2.1 4.20 m
Horizontal 1x1x1.80 1.80
6x3.5Kg/m 21.00 Kg
Shutter frame 35x35x5mm
Vertical 1x2x2x2.088 = 8.35 m
Horizontal 2x2x0.894 3.58 m
11.93
11.93x2.60Kg/m 31.02 Kg
Intermediate J Section in between Grill & CR sheet
2x0.894x2.28Kg 4.08 Kg
Tie bar 32x6mm flat 1x1.8x1.5Kg 2.70 Kg
Stiffeners 18x 5 mm MS flat at rear side
Horizontal 2x1x0.894x0.7 Kg 1.25 Kg
Diagonal 2x2x1.273x0.7 Kg 3.56 Kg
MS flat 32x3mm@ edge of CR Sheet 1x0.7x1.1KG 0.77 Kg
Total 64.38 Kg
Add 5% wastage 3.22 Kg
67.60 Kg
CR Sheet reqd. 1x2x0.894x0.7x9.8 Kg/m2 12.27 kg
Add 5% wastage 0.61 kg
12.88 kg
MS grill of 20kg/m2 1x2x0.894x1.4x20kg/m2 50.06 kg
Add 5% wastage 2.50 kg
52.56 kg
Painting Red oxide primer 1.8x2.1=3.78m2-2.50m2 1.28 M2
1.28x2.2 2.82 M2
Main Data
67.60 kg MS angles & Flats 41.20 kg 2785.12
12.88 kg CR sheet18 gauge 41.20 kg 530.66
52.56 kg MS grill includingfabrication charges 75.40 kg 3963.02
76.64 Kg Labour charges for cutting welding and fabrication
of angles sheets in position & fixing 33.40 kg 2559.78
2.82 M2 Priming coat 54.50 M2 153.69
6 Nos Hold Fasts 200mm length 67.30 Each 403.80
4 Nos Hinges 125mmx30mm 78.40 Each 313.60
2 Nos Tower Bolt250mm long 12mm dia 85.50 Each 171.00
1 Nos Tower Bolt 200 mm long 12mm dia 71.90 Each 71.90
1 No Aldrop 250mm long 16mm dia 158.20 Each 158.20
2 Nos Ms Handle 200mm long 56.20 Each 112.40
3.78 M2 labour charges for fixing door 149.00 M2 563.22
LS Conveyance,Handling,Scaffolding,Chipping
masonry,concrete etc& redoing the same LS LS 240.00
12026.39
3181.58
For 3.78M2 3181.58
Rate Rs. 3182.00 /M2
5 Manufacturing, supplying and fixing of Steel doors with the following specification M.S angles of a size 40x40x6mm
are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32x6mm M.S.
flat is provided at required intervals in the shutter frames 18 gauge C.R. sheet is laid as panel in the shutter and welded
intact for 1/3 bottom portion of the shutter. M.S. flat 18x5mm is welded over the 32x6mm M.S. flat sand witching
the CR sheet in between. Additional stiffener with 18x5mm M.S. flat is provided diagonally at the rear side of the
shutter. The balance 2/3 portion at top is provided with grill at an average weight of 20kg/sq.m with 3mm pin
headed glass used for glazing and fixed with 15x12 mm teakwood beeding and 6 Nos hinges for double leaves
shutter to be provided 6nos of holdfasts 120mm in length made of angle section spliced at the ends are welded to the
outer frame of the door. Tower bolts 2nos. one at top and the other at the bottom arte provided one aldrop is provided
at on appropriate place in the door. A Tie bar is provided at the bottom of the outer frame to prevent twisting of frame
during transportation or fixing. All members are given one coat of red oxide primer as directed by the departmental
officers.
Double The rate
leaf includes
Door costXof2.1M(1/3
size 1.8 all meterials, labour charges,
panneled&2/3 taxes,
grilled withtransportation
glazing)) to site of3.78
work, m2
loading, unloading
and all other incidental charges etc., complete.
Materials required
Outer frame 40x40x6mm
Vertical 1x2x2.1 4.20 m
Horizontal 1x1x1.80 1.80
6x3.5Kg/m 21.00 Kg
Shutter frame 35x35x5mm
Vertical 1x2x2x2.088 = 8.35 m
Horizontal 2x2x0.894 3.58 m
11.93
11.93x2.60Kg/m 31.02 Kg
Intermediate J Section in betn Grill & CR sheet
2x0.894x2.28Kg 4.08 Kg
Tie bar 32x6mm flat 1x1.8x1.5Kg 2.70 Kg
Stiffeners 18x 5 mm MS flat at rear side
Horizontal 2x1x0.894x0.7 Kg 1.25 Kg
Diagonal 2x2x1.273x0.7 Kg 3.56 Kg
MS flat 32x3mm@ edge of CR Sheet 1x0.7x1.1KG 0.77 Kg
Total 64.38 Kg
Add 5% wastage 3.22 Kg
67.60 Kg
CR Sheet reqd. 1x2x0.894x0.7x9.8 Kg/m2 12.27 kg
Add 5% wastage 0.61 kg
12.88 kg
MS grill of 20kg/m2 1x2x0.894x1.4x20kg/m2 50.06 kg
Add 5% wastage 2.50 kg
52.56 kg
3 mm Pin headed glass : 1X2X0.894X1.40 2.50
Add 10% wastage 0.25
2.75
Teakwood Beeding :2x2(0.894+1.40) 9.18
Painting Red oxide primer 1.8x2.1=3.78m2-2.50m2 1.28 M2
1.28x2.2 2.82 M2
Main Data
67.60 kg MS angles & Flats 41.20 kg 2785.12
12.88 kg CR sheet18 gauge 41.20 kg 530.66
52.56 kg MS grill includingfabrication charges 75.40 kg 3963.02
2.75 M2 3 mm Pin headed glass 220.00 M2 605.00
9.18 Rm Teakwood Beeding 15.00 Rm 137.70
76.64 Kg Labour charges for cutting welding and fabrication
of angles sheets in position & fixing 33.40 kg 2559.78
2.82 M2 Priming coat 54.50 M2 153.69
6 Nos Hold Fasts 200mm length 67.30 Each 403.80
4 Nos Hinges 125mmx30mm 78.40 Each 313.60
2 Nos Tower Bolt250mm long 12mm dia 85.50 Each 171.00
1 Nos Tower Bolt 200 mm long 12mm dia 71.90 Each 71.90
1 No Aldrop 250mm long 16mm dia 158.20 Each 158.20
2 Nos Ms Handle 200mm long 56.20 Each 112.40
3.78 M2 labour charges for fixing door 149.00 M2 563.22
LS Conveyance,Handling,Scaffolding,Chippingmasonry ,concrete etc & redoing the sam 240.00
12769.09
3378.07
For 3.78M2 3378.07
Rate Rs. 3378.00 /M2
26 Supplying ,fabricating and fixing in position of steel frame without
bottom frame, of size 100X60mm rectangular section with necessary
rebate 30mmX15mm, to host the shutter,using 1.25mm thick (18
guage) CRCA cold rolled frame steel plate confirming to ISI
specified ensured of right butt joint riveted hold assembly with nylon
insert,not be welded with special purpose hard ware.Proclaimed
including phopating as per ISI with rust preventive primer ready to
assemble condition for easy installation at site including
dismantling,making necessary chipping and holes in RCC columns,
walls with power drills to the extent required ,including providing
concrete 1:2:4 inside the box curing etc complete.The cost includes
the cost of hold fast ,plastic bush, insert receiver,rubber
bottom,shock absorber etc complete as directed by the departmental
officers in all floors.
378.50
"N "TYPE VENTILATOR
8 Fabrication, supply and fixing in position of 'N' type ventilators using M.S. angle of size 25 x 25 x5 mm for frame
and M.S. Flat of size 20 x 3 mm for fixing the weld mesh and using 25 x 22 x3 mm 'T' section for frame glass. Special
type of Hold fast welded to the frame of 45 degree inclined towards centre for wall and fxing the weldmesh 25mm
square including cost of 3mm thick pinheaded glass panes for all panels and fixing the glass panels with necessary
clips & putties with required bolts, nuts and washers and one coat of red oxide primer etc. including necessary
dismantling, making holes in RCC columns, beams, masonry wherever necessary with power drill to the extend
required and made good to the original conditions after fising as directed by the departmental officers.
Consider a size of ventilator 2.5 x 0.6 1.50 M2
L Angle 25x25x5mm
Horizontal member 4.00 2.5 10.00
Vertical 4.00 0.35 1.40
Hold fast 4.00 0.15 0.60
Subtotal 12.00
Total weight of 'L' Angle @ 1.8 kg/rm 21.6 Kg
25 x 22 x 3 mm 'T' section @ 1.03 kg/rm 2.00 0.35 2.80
Weight of' T' section @ 1.03 kg/rm 2.884 Kg
Subtotal
M.S. Flat @ 0.5 kg/m 2.00 4 0.20
2(2.50 - 2x.0.025)4 nos. 1.96
Weight of' M.S. Flat @ 0.5 kg/mtotal 0.98 Kg
Alround @ 0.5 kg/rm 2.50 2 5.00
0.50 Kg
Total weight of 'L' Angle,T section,M.S.Flat 21.6+2.884+0.+2.50 27.96
Add 5% for wastage 1.40
29.36Kg
0.20 Weld mesh 2.50 m2 0.50
Glass 10x0.5x0.30 m2 1.50
Add 10 % for wastage 0.15
1.65
Primer ( 1.96+5)x0.025=0.174m2
14.80x.025 =0.37m2
0.544m2
29.36 Kg MS angles & Flats 41.20 Kg 1209.63
0.50 m2 Weld mesh 75x25mm 295.00 m2 147.50
1.65 m2 3mm thick pin headed Glass 220.00 m2 363.00
0.54 m2 Priming coat 54.50 m2 21.68
27.960 Kg Labour charges 33.40 Kg 933.86
LS Dismantling, red oxide charge etc. & LS 150.00
glass pin etc
Total for 1.50m2 2825.68
Rate per 1 m2 1883.78
Say per m2 Rs. 1884.00
1 Supplying and fixing Teakwood frame with scantling above 2m for doors including labour charges for wrought
and putup in possible and for fixing holdfast in frame and necessary etc., complete.
T.W.Scantling upto 3m m3
1 m3 Cost of T.W. Scantlings 111600.00 111600.00
1 m3 labour charges for wrought and putup 8935.00 m3 8935.00
120535.00
Rate Rs. 120535.00 m3
2 Supplying and fixing Teakwood fully panelled shutters for using Teakwood scantlings upto 4m length and
teakwood 40mm thick for styles and rails and 22mm thick for planks and panels including cost of wind
appliances and labour charges for fixing the furniture fittings in position but excluding cost of furniture fittings
complete as directed by the Departmental officers.
Two Leaves
Size of ventilator of size=0.9mx0.6m 0.54 m2
Outer frame H=2x0.9x1.419 = 2.554 kg
Outer frame V=2x0.6x1.419 = 1.703 kg
Internal Mullion 1x0.6x2.28 kg 1.368 kg
Shutter Top & Bottom H=2x2x 0.42x1.419 = 2.380 kg
Vertical = 2x2x0.56x1.419 = 3.178 kg
Glazing bar section = 2x1x0.38x1.036 = 0.787 kg
11.97 kg
Add 5% wastage 0.60 kg
12.57 kg
Glazed panel area = (2x0.42)x0.56 0.47 m2
Add 10% wastage 0.05 m2
0.52 m2
TW Beading = 2x2x2x(0.38+0.55) 7.44 RM
12mm sq. rods=4x0.90x1.13kg/m 4.07 kg
Add 5% wastage 0.20 kg
4.27 kg
Primer
(0.54-0.47)x2.20 0.15 m2
MS rod 4x0.048x0.90 0.17 m2
0.32 m2
Main data
12.57 kg Special Steel section CF7D & F4B 60.90 kg 765.51
4.27 kg 12mm Sq. rods 41.20 kg 175.92
4.07 m2 Labour charges for fixing M.S.rods 19.40 Kg 78.96
0.52 m2 Pin headed 3mm thick glass 220.00 m2 114.40
7.44 RM TW Beading 15x12mm 15.00 RM 111.60
0.54 m2 Labour for fixing ventilator 187.00 m2 100.98
0.32 m2 Primer 47.80 m2 15.30
2.00 Nos Hold Fasts 67.30 E 134.60
4.00 Nos Hinges 100mmx30mm 62.90 E 251.60
LS Conveyance, Handling, Scaffolding, Chipping/Masonary
concerete & making good the damaged portion
LS 130.00
For 0.54M2 1878.87
Rate Rs. 3479.39 M2
Say Rs. 3479.00 M2
13 supplying and fixing in position Glazed steel ventilator with Side/Central hung shutters (Three Leaves) frames and
made shutter frame made out of steel section conforming to IS 7452 /1990.The outer frame made out of z section
(F7D) of size 33 x22 x3 mm conforming to IS 7452/1990.The mullions are made out of (F4B) section of size 46x25x3
mm and conforming to IS7452/1990.The shutters are individual and each of them can be operated separately.Sash bars
are made of T section (T2) of size 25 x 22 x 3mm 2 nos of sturdy hinges and one number of handle cum latch of
special type are fixed are each openable shutter with suitable opening in left for its easy operation, one member of
adjustable strings with fixing brackets of sufficient length are provided for each shutter 4 nos of 40 x 40 x 3 mm
angle hold fast 230mm length are welded with the frame at appropriate point M.S Square bars of 12 mm dia is welded
to the inner face of the ventilator at equal intervals not exceeding 10 cm spacing 3mm pin headed glass is used for
Glazing with good quality anf fixed with 15 x 12 mm teak wood beadings with screws for fixing .The shutters are
to open outside.All the section are given with one coat of red oxide primer etc. complete complying with standard
specification
.The sample of materials and fittings shall be got approved by the departmental officers before use on work. ( The rate
shall inclusive of cost all materials labour charges one coat of primer,weld charges, including cost of welding
electrodes,transportation to site work, loading,unloading and incidental charges etc., complete complying with
standard specification.
Three Leaves
Size of ventilator of size=0.9mx0.6m 0.54 m2
Outer frame H=2x0.9x1.419 = 2.55 kg
Outer frame V=2x0.6x1.419 = 1.70 kg
Internal Mullion 2x0.6x2.28 kg 2.73 kg
Shutter Top & Bottom H=2x3x 0.27x1.419 = 2.30 kg
Vertical = 2x3x0.57x1.419 = 4.85 kg
Glazing bar section = 3x1x0.24x1.036 = 0.75 kg
14.89 kg
Add 5% wastage 0.74 kg
15.63 kg
Glazed panel area = (3x0.27)x0.54 0.44 m2
Add 10% wastage 0.04 m2
0.48 m2
TW Beading = 2x3x2x(0.27+0.54) 9.72 RM
12mm sq. rods=4x0.90x1.13kg/m 4.07 kg
Add 5% wastage 0.20 kg
4.27 kg
Primer
(0.54-0.44)x2.20 0.22 m2
MS rod 4x0.048x0.90 0.17 m2
0.39 m2
Main data
15.64 kg Special Steel section CF7D & F4B 60.90 kg 952.48
4.27 kg 12mm Sq. rods 41.20 kg 175.92
4.07 m2 Labour charges for fixing M.S.rods 19.40 m2 78.96
0.48 m2 Pin headed 3mm thick glass 220.00 m2 105.60
9.72 RM TW Beading 15x12mm 15.00 RM 145.80
0.54 m2 Labour for fixing ventilator 187.00 m2 100.98
0.39 m2 Primer 47.80 m2 18.64
2.00 Nos Hold Fasts 67.30 E 134.60
6.00 Nos Hinges 100mmx30mm 62.90 E 377.40
LS Conveyance, Handling, Scaffolding, Chipping/Masonary
concerete & making good the damaged portion
LS 130.00
For 0.54M2 2220.38
Rate Rs. 4111.81 M2
Say Rs. 4112.00 M2
14 Supplying and Fixing in position steel glazed Ventilators with central hung swing shutter using F7D section of size
30x25x3mm for inner outer froames with 4 Nos. Of 12mm dia MS sq.bars for protection and 2 Numbers of clamps
welded with outer frame and using 3mm thick pin headed glass for panel including painting with one coat of Red
Oxide Primer dismantling the masonry wherever necessary for fixing the ventilator and redoing the same to the
original condition fixing the ventilator and redoing the same to the original condition fixing the ventilator in position
etc.,
Area = 1.35 m2
Outer frame
M.S. angle 40x40x6 mm
(2x1.80) + 0.75 4.35
Hold fasts 6 Nos 6x0.15 0.9
5.25 RM
Weight of M.S. angle = 5.25x3.50kg/m
18.375 kg
Stiffener rod 0.75m = 0.75x0.60kg/m
0.450 kg
Shutter frame
9.56 kg
Area of wire mesh (f1/proof mesh)
0.48x0.75
0.350 m2
Main data
110
56.1
11.2 67.3
12.6
33650.4
8057 30139
42463.6 8057
180.14
199.86
136.62
94.88
6
12769.09
19.5
22
9
27.964
1.3982
27.96
21.68
50.95
45.8595
16.83
45.9
5038.12
93.3333
89.7435897436 89.7436
96.1538461538
90.252
8005.48
9498.67
`
2824.8893076923
3883.93
p
25.71