Documente Academic
Documente Profesional
Documente Cultură
Student Guide
WARRANTY INFORMATION
The essential purpose of any sale or contract for sale of any of the products listed in the POTTER catalog or
price list is the furnishing of that product. It is expressly understood that in furnishing said product, POTTER
does not agree to insure the Purchaser against any losses the Purchaser may incur, even if resulting from the
malfunction of said product.
POTTER warrants that the equipment herein shall conform to said descriptions as to all affirmation of
fact and shall be free from defects of manufacture, labeling and packaging for a period of one (1) or
five (5) year(s), depending on the product, from the invoice date to the original purchaser, provided that
representative samples are returned to POTTER for inspection. The product warranty period is stated on
the exterior of the product package. Upon a determination by POTTER that a product is not as warranted,
POTTER shall, at its exclusive option, replace or repair said defective product or parts thereof at its own
expense except that Purchaser shall pay all shipping, insurance and similar charges incurred in connection
with the replacement of the defective product or parts thereof. This Warranty is void in the case of abuse,
misuse, abnormal usage, faulty installation or repair by unauthorized persons, or if for any other reason
POTTER determines that said product is not operating properly as a result of causes other than defective
manufacture, labeling or packaging.
The Aforesaid Warranty Is Expressly Made In Lieu Of Any Other Warranties, Expressed Or Implied, It
Being Understood That All Such Other Warranties, Expressed Or Implied, Including The Warranties Of
Merchantability And Fitness For Particular Purpose Are Hereby Expressly Excluded. In No Event Shall
Potter Be Liable To Purchaser For Any Direct, Collateral, Incidental Or Consequential Damages In
Connection With Purchaser’s Use Of Any Of The Products Listed Herein, Or For Any Other Cause Whatsoever
Relating To The Said Products. Neither Potter Nor Its Representatives Shall Be Liable To The Purchaser
Or Anyone Else For Any Liability, Claim, Loss, Damage Or Expense Of Any Kind, Or Direct Collateral,
Incidental Or Consequential Damages Relative To Or Arising From Or Caused Directly Or Indirectly By Said
Products Or The Use Thereof Or Any Deficiency, Defect Or Inadequacy Of The Said Products. It Is Expressly
Agreed That Purchaser’s Exclusive Remedy For Any Cause Of Action Relating To The Purchase And/or Use
Of Any Of The Products Listed Herein From Potter Shall Be For Damages, And Potter's Liability For Any And
All Losses Or Damages Resulting From Any Cause Whatsoever, Including Negligence, Or Other Fault, Shall
In No Event Exceed The Purchase Price Of The Product In Respect To Which The Claim Is Made, Or At The
Election Of Potter, The Restoration Or Replacement Or Repair Of Such Product.
i
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Table of Contents
Welcome to Potter's IPA Systems Training!................................................................................................1
Class Purpose.............................................................................................................................................. 1
Method of Delivery..................................................................................................................................... 1
Class Manual & Activity Handouts............................................................................................................ 1
Class Agenda............................................................................................................................................... 1
Products & Hardware Overview..................................................................................................................2
IPA Series Addressable Fire Alarm Panels................................................................................................. 2
IPA Accessories - P-Link Modules Overview............................................................................................. 3
IPA SLC Addressable Devices Overview................................................................................................... 5
Panel Installation...........................................................................................................................................6
Cabinet Installation..................................................................................................................................... 6
Electrical Specifications & Connections..................................................................................................... 7
Battery Connections.................................................................................................................................... 8
Device Installation..........................................................................................................................................9
P-Link Devices............................................................................................................................................ 9
CA-6500................................................................................................................................................9
UD-1000...............................................................................................................................................9
P-Link Connection
Instructor Note: Slide 72........................................................................................................................... 11
IPA Panels Class B Wiring..................................................................................................................12
IPA Panels Class X/A Wiring..............................................................................................................12
MC-1000 Wiring.................................................................................................................................12
P-Link Addresses Overview..................................................................................................................... 13
P-Link Devices & Modules...................................................................................................................... 14
RA-6500/RA-6075 Annunciators........................................................................................................14
LED-16F / LED-16 Annunciator........................................................................................................14
PSN-1000/PSN-1000(E)
Smart Power Supply............................................................................................................................15
Accessory Cards & Stacker Brackets....................................................................................................... 20
P-Link Device Wiring............................................................................................................................... 22
PAD100-SLCE.....................................................................................................................................22
DRV-50................................................................................................................................................23
RLY-5...................................................................................................................................................24
FCB-1000............................................................................................................................................25
FIB-1000.............................................................................................................................................26
SPG-1000............................................................................................................................................27
MC-1000.............................................................................................................................................27
PSN-1000 Power Supply Video...................................................................................................................28
PSN-1000 Overview................................................................................................................................. 28
Description..........................................................................................................................................28
Features..............................................................................................................................................28
Electrical Specs...................................................................................................................................28
Signaling Line Circuit Installation.............................................................................................................29
SLC Overview.......................................................................................................................................... 29
Class B (Style 4) Wiring Example.......................................................................................................31
ii
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
iii
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
iv
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
The IPA Systems Training class is a comprehensive lecture and hands-on classroom experience that covers Potter Electric's
IPA series fire panel systems, accessories, and modules.
Class Purpose
This 2-day course has been designed for anyone interested in learning about Potter's IPA series fire systems and accessories.
Method of Delivery
This course has been designed to be highly-interactive by combining an instructor-led PowerPoint slide presentation, and many
panel hands-on exercises. The class activities provide substantial time to use Potter's control panel keypad to program and address
devices, view panel history, and pinpoint SLC status information. Other instructor-led and independent activities include wiring
and installing addressable devices, using the PC-based software to program Email reporting and reminders, setup users, and other
programming options.
Class Agenda
DAY TOPICS
• Products & Hardware Overview includes an introduction to Potter's IPA fire panel system
models, system accessories, modules and devices.
• Panel & Device Installation addresses electrical specifications, connections, wiring P-Link
devices and modules, and a variety of Class A, X and B circuit wiring examples.
• Signaling Line Circuit Installation includes an overview of addressable devices and modules,
benefits of isolators, and steps to address SLC devices.
• Configuring Inputs/Outputs addresses different circuit configuration options, including
synchronization features, input and output circuits, relay contacts, and power supply circuit
DAY ONE: options.
Overview & Hardware
• PSN-1000 Power Supply Overview video.
• P-Communication Networking & E-mail Overview includes the setup of direct and network
IP connections, benefits of IP communications and how it works. E-mail reporting options,
setting up e-mail addresses and reminders are discussed.
• Panel Start-Up & Programming covers the entire panel setup process using both the LEARN
function and panel configuration software installed on a local or remote PC.
• Keypad Interface Exercises includes self-guided FACP programming, data transfer, and
system tools options, such as IP/Ethernet status, and host name setup.
• Panel Software Review includes a review of PC panel software screens, such as remote access,
DAY TWO: general options (i.e., panel name, outgoing email address), e-mail reporting/reminders, dialer
Software & and IP reporting setup, and others.
Programming • PFC-6006 Sprinkler Monitoring Panel Overview video.
• Independent Programming Exercises.
1
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
2
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
The table below briefly describes Potter's P-Link modules and appliances:
3
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
4
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
The table below lists Potter's PAD Protocol addressable detectors, bases and modules:
5
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Panel Installation
Cabinet Installation
DESCRIPTION NOTES
6
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
DESCRIPTION NOTES
7
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Battery Connections
DESCRIPTION NOTES
8
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Device Installation
P-Link Devices
9
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
• Connect P1 on UD-1000 to P4 on
main panel with cable provided Dip Switches
P1 Connector
10
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
P-Link Connection
Instructor Note: Slide 72
DESCRIPTION NOTES
P-Link Continued
11
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
P-Link Connection
(continued)
DESCRIPTION NOTES
IPA Panels Class X/A Wiring IPA Panels Class X/A P-Link Example:
Panel
Connection
B
P-LINK 1 P-LINK 2
A
- + A B - + A B
+
CA-6500
Connection Expansion
-
P-LINK 1 P-LINK 2
Device
- + A B - + A B
B
A
+
Expansion
-
Device
MC-1000
MULTI-CONNECT EXPANDER
S1
12
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
DESCRIPTION NOTES
• Set address via Dip Switch on module. LED-16 (1-31) DRV-50 (1-31)
13
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
RA-6500/RA-6075 Annunciators
• RA-6500R / RA-6500F – 4 x 40 LCD display
14
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
MODULE NOTES
PSN-1000/PSN-1000(E)
Smart Power Supply
• Up to (31) PSN-1000s can
be installed
• Built-in isolated P-Link
repeater
• Up to 6500 ft. between PSN-1000 panels
using 14 AWG cabling
• 10 amps of power
• 6 NACs
• 2 Dry Contact Inputs
• Can be connected using Class A or Class B
• PSN-1000E allows for (6) stacker brackets to be
mounted in cabinet
15
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
MODULE NOTES
Cabinet Dimensions
• PSN-1000 – 16" x 17" x 3-7/8"
16
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
MODULE NOTES
PSN-1000/PSN-1000(E) (continued)
Electrical Specifications
• Operates on Nominal 120 VAC or 240 VAC field
selectable
• Panel must be connected to a dedicated circuit
• Terminal block accepts up to 12AWG wire
Battery Connections
• Charging voltage is approximately 27.3VDC
• FACP enclosure will house up to two (2) 18AH
batteries
• Panel will charge up to 55AH batteries
• Complete battery calculation to determine battery size
• NFPA 72 requires 24 hours of standby power followed
by 5 minutes of alarm activation if it is a standard
non-voice system
• NFPA 72 requires 24 hours of standby power plus
15 minutes of alarm activation for a voice system
• Batteries should be replaced every five (5) years
17
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
MODULE NOTES
PSN-1000/PSN-1000(E) (continued)
Trouble Contacts
• Two (2) Relay Outputs
– System Wide Trouble Relay
– System Wide Low AC Relay
Input/Output Connections
• Two (2) Dry Contact Inputs
• Six (6) Class B NACs, or three (3) Class A NACs
– NACs rated 3 amps each
• Isolated P-Link Connection
Continued
18
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
MODULE NOTES
See
Note
See
Note
BREAK!!!!!
19
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
DESCRIPTION NOTES
Accessory Cards
• Supplied with mounting bracket (stacker bracket)
• Depending on location brackets can be stacked
up to (3) three high
Stacker Brackets
Can be mounted in any of the following:
• IPA-4000 panel – Qty 6
• PSN-1000E – Qty 6
• AE-14 – Qty 14
• AE-8 – Qty 8
• AE-2 – Qty 2
20
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
DESCRIPTION NOTES
21
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
MODULE NOTES
PAD100-SLCE
• Adds an additional 127 addressable points
(IPA-4000 & IPA-100; 60 points on IPA-60)
• Can be used with all IPA panels
• Thirty-one (31) can be installed on a IPA-4000
• One (1) can be installed on IPA-100 / IPA-60
panels if internal SLC is disabled PAD100-SLCE & SLCE-127 Wiring Example:
22
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
MODULE NOTES
23
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
MODULE NOTES
24
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
MODULE NOTES
Optional 19" Rack Mount can be used for: Optional Rack Mount Example:
25
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
MODULE NOTES
26
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
MODULE NOTES
reporting technology.
• Each MC-1000 supports communication
between the host reporting panel and
two client panels. HOST PLINK
S1
LUNCH BREAK!!!!!!!
PSN-1000 Power Supply Overview Video
27
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Instructor Note: Inform students that video is approx. 5 minutes in length, which introduces them to the
PSN-1000's function. The information below summarizes the key points of the PSN-1000 cut sheet.
PSN-1000 Overview
The PSN-1000 series is a UL listed intelligent 10 amp notification
power supply and P-Link (RS-485) repeater. The power supply
connects to the P-Link bus from the control panel and is operated
and supervised from the panel. It may be installed 6,500 feet from
the control panel, and then repeats the P-Link communication for
another 6,500 feet.
Description
The PSN-1000 has six (6) Class B or three (3) Class A power
outputs. Each output is regulated and power limited with a 3
Amp maximum rating. In addition, the PSN-1000 has two (2)
programmable dry contact inputs. The dry contact inputs are Class
B, supervised inputs.
The power supply operates on either 120 or 220 VAC power and
has a regulated 24 VDC output. In addition, the panel can charge
up to 55 AH batteries and will house 18 AH batteries.
The cabinet is constructed out of 18 gauge cold rolled steel with a durable red powder coat finish. A standard Potter key lock is
provided for securing the door. Electrical conduit knockouts are provided on the sides and top providing installers with multiple
options for installing conduits and providing proper power separations.
The PSN-1000 is a self contained intelligent power supply/P-Link repeater complete with cabinet. The PSN-1000E is the
intelligent power supply/P-Link repeater with additional cabinet room for the exclusive Stacker Bracket for SLCE-127 loop
expanders.
The power supplies are programmed and controlled through the main control panel P-Link bus. The panel displays any troubles or
off normal conditions of the power supply and the events are stored in the panel history buffer. Each output can be independently
configured to provide one of four synchronization patterns, constant power, ANSI temporal Code 3 or Door Holder power. The
panel can be configured to synchronize Potter/AMSECO®, Gentex®, Cooper Wheelock® and System Sensor®.
Features
• 10 Amp Power Supply
• 3 Amps, regulated per NAC
• 6 NACs Class B or 3 NACs Class A
• 2 dry contact inputs
• Fully programmable and monitored through control panel
• Isolated P-Link repeater connection, Class A or B
• Up to 31 power supplies per control panel with system wide sync
• Quadrasync feature synchronizes strobes from Potter/AMSECO®, Gentex®, Cooper-Wheelock® and System Sensor®
• Compatible with all Potter IPA series fire alarm control panels
Electrical Specs
• 120/240 VAC Input at 50/60 HZ
• 5.1 Amps/3.0 Amps max draw
• Standby Current 60 mA
• Alarm Current 200 mA
28
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
SLC Overview
DESCRIPTION NOTES
29
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Class A Wiring Example: The Class A configuration does not provide the same level of protection as Class X. and 2. The use
of an Isolator Module / Isolator Base is not required.
30
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
31
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
32
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
33
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
34
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Important Note! Set the address via the device's Dip Switch
before connecting to the SLC!
35
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Important Note! Set the address via the device's Dip Switch
before connecting to the SLC!
Important Note! Set the address via the device's Dip Switch
before connecting to the SLC!
36
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
to 3.5% / foot
• Sampling tubes – 2.5 ft., 5 ft., or 10 ft.
• Set address via Dip Switch on device prior to connecting
to the control panel
Important Note! Set the address via the device's Dip Switch
before connecting to the SLC!
37
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
FORM C RELAY
10A, 250VAC
FORM C RELAY
10A, 250VAC
PAD100-DRTS
SUPERVISION OPTION
SUPERVISION OPTION
SHOWN IN “OFF” POSITION
38
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
FORM C RELAY
Important Note! Set the address via the device's Dip Switch 10A, 250VAC
PAD100-DRTS
SUPERVISION OPTION
SUPERVISION OPTION
SHOWN IN “OFF” POSITION
39
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Addressable Bases:
• PAD100-6DB/4DB – Addressable 6" / 4" Detector Base
• PAD100-SB – Addressable Sounder Base
• PAD100-RB – Addressable Relay Base
• PAD100-IB – Addressable Isolator Base
40
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
41
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
42
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
43
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
44
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
MODULES:
• PAD100-PSSA/PSDA – Pull Station (Single/Dual Action)
• PAD100-MIM – Mini Input Module
• PAD100-SM – Speaker Module
• PAD100-IM – Isolator Module
• PAD100-RM – Relay Module
• PAD100-NAC – Notifaction Appliance Circuit Module
• PAD100-TRTI – Twin Relay-Twin Input Module
• PAD100-DIM – Double Input Module
• PAD100-OROI – One Relay-One Input Module
• PAD100-ZM – Zone Module
• PAD100-LED – Remote LED Module
• PAD100-LEDK – Remote LED w/Key Module
• PAD100-SIM – Single Input Module
45
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
before connecting to the SLC! Set the address via the dip switch TO NEXT DEVICE
located on the module.
46
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
47
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
PAD100-NAC – Notification Appliance Circuit Module PAD100-NAC Installation into Electrical Box Wiring Example:
• Monitored output module providing an additional
superviced output
• Used as a NAC or a releasing output
• Monitors presence of 24 VDC aux power
• SLC Class A (Styles 6 & 7) and Class B (Style 4)
• Mounts in either double gang box or 4" square box
• Wiring terminals use 22 to 12 AWG
• Set address via Dip Switch on device prior to connecting
to the control panel
Important Note! Set the address via the device's Dip Switch
before connecting to the SLC!
FROM FACP OR
PAD100-NAC CLASS A
PREVIOUS MODULE
TO NEXT MODULE
+ + + NOTE: END-OF-LINE
AUXILIARY 24
- - - RESISTOR IS NOT
REQUIRED
VOLT POWER
NOT SUITABLE FOR
FROM FACP
SYNCHRONIZATION OF
NOTIFICATION APPLIANCES
48
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
49
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
PAD100-TRTI – Two Relay-Two Input Module PAD100-TRTI Installation into Electrical Box Example:
FROM FACP OR
PREVIOUS MODULE
TO NEXT MODULE
NOTE:
END-OF-LINE RESISTOR
IS NOT REQUIRED
50
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
END-OF-LINE
RESISTOR
5.1K OHM 12 W
Part #3005013
51
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
FROM FACP OR
PREVIOUS MODULE
END-OF-LINE RESISTOR
5.1K OHM 1/2 W
Part #3005013
52
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
PAD100-DIM – Dual Input Module PAD100-DIM Installation into Electrical Box Example:
FROM FACP OR
PREVIOUS MODULE
TO NEXT MODULE
NOTE:
END-OF-LINE RESISTOR
IS NOT REQUIRED
FROM FACP OR
PREVIOUS MODULE
TO NEXT MODULE
END-OF-LINE
RESISTOR
5.1K OHM 12 W
Part #3005013
END-OF-LINE
RESISTOR
5.1K OHM 12 W
Part #3005013
53
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
+ + + END-OF-LINE RESISTOR
1 W
5.1K OHM
- - -
2
Part #3005013
FROM FACP OR
PREVIOUS MODULE
TO NEXT MODULE
+ + + END-OF-LINE RESISTOR
5.1K OHM 1 W
2
- - - Part #3005013
54
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
FROM FACP OR
PREVIOUS MODULE
Important Note! Set the address via the device's Dip Switch
before connecting to the SLC! FROM FACP OR
PREVIOUS MODULE
TO NEXT MODULE
55
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
FROM FACP OR
PREVIOUS MODULE
TO NEXT MODULE
END-OF-LINE RESISTOR
5.1K OHM 1 W
2
Part #3005013
FROM FACP OR
PREVIOUS MODULE
TO NEXT MODULE
TO FACP OR NEXT
TO NEXT MODULE MODULE
56
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Slides: 167-170
BREAK!!!!!
57
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
58
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Configuring Inputs/Outputs
Instructor Note: Slides 171-182
Description NOTES
IPA-60
• Total outputs = 4
• 5.0 AMPS
IPA-100
• Total outputs = 4
• 5.0 AMPS
IPA-4000
• Total outputs = 10
• 10 AMPS
PSN-1000
• Total outputs = 6
• 10.0 Amps
• Must be paired with a panel
59
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Description NOTES
• Configuration options:
– Conv NAC General Purpose
– Conv NAC AMSECO Sync
– Conv NAC Gentex Sync
– Conv NAC Gentex Sync w/T4
– Conv NAC System Sensor Sync
– Conv NAC Wheelock Sync
– Conv NAC Aux Constant
– Conv NAC Aux Resettable
– Conv NAC Aux Door Holder
– Conv NAC Aux Door Holder Low AC Drop
– Conv NAC Aux ANSI
– Conv NAC City Tie
– Conv NAC Release Solenoid EOL Value is now
• Output ratings:
adjustable between 2K-27K!
– NACs rated 3 Amps @ 24 VDC
– I/Os rated 1 Amp @ 24 VDC
60
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
NOTES:
1. The QuadraSync feature enables NACs' output
to be synchronized across either the same brand
or up to four different brands.
2. Each NAC connects to its own circuit.
61
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
62
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
63
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
64
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
NOTES:
65
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Description NOTES
IPA-4000
• Total I/Os = 4
PSN-1000
• Total inputs = 2 (Class B)
• Must be paired with a panel
66
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Description NOTES
67
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
68
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Description NOTES
69
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Description NOTES
BREAK!!!!!!!
70
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Direct Connection
Network Connection Example:
71
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Network Connection
• When up/down loading panel configuration information, the
“NetBIOS” name or the IP address of the panel is needed.
NetBIOS name
72
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Setup Requirements:
1. PC connected to same network must have configuration
software installed.
2. The “Remote Access” option must be enabled at the IPA
control panel keypad to download the configuration.
73
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
IP Communications NOTES
Benefits to IP Communication
• Only one means of communication is required, if approved
by AHJ.
• Keeps the digital signal from the FACP digital. Dialers are
analog so when using a dialer, message has to be converted
to analog to be properly transmitted.
74
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
• IPA4000XXXXX@potterlink.com
Example: ipa40000001005@potterlink.com
75
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
• Alarm conditions
• Supervisory conditions
• Trouble conditions
• Scheduled
– Daily
– Weekly
– Monthly
• Small in size
76
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
77
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Panel Start-Up
Instructor Note: Slides 222-232
78
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
BREAK!!!!!
79
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Keypad Interface
INSTRUCTOR NOTE: Refer students to the Class Exercises handout (Exercises 7-14). The Control Panel
Menu structure is shown below and on the last page of the exercise handout.
Keypad Interface Exercises
Refer to the "Keypad Interface" handout to complete the remainder of the exercises. For your convenience, the "Control Panel
Menu" structure is shown below to help you complete the exercises.
MAIN MENU
Ethernet Options
1=DHCP Settings
2=Static IP
Programming 3=Subnet Mask
1=Learn All 4=Default Gateway
2=EOL Learn 5=Alternate IP
3=SLC Learn 6=Alt. Subnet
4=PSN Learn 7=Alt. Gateway
ESC=Exit
80
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
NOTES:
81
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Job Details
NOTES:
82
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
General Options
NOTES:
83
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Zones
NOTES:
84
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Points
NOTES:
85
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Sensitivity Settings
NOTES:
86
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Email Reporting
NOTES:
87
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Email Reminders
NOTES:
88
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Users Setup
NOTES:
89
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
LAN Settings
NOTES:
90
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Dialer Setup
NOTES:
91
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
IP Reporting
NOTES:
92
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Class A Card
NOTES:
93
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Panel Overview
The PFC-6006 is a listed small conventional fire system suited
to monitor a small fire system, such as a fire sprinkler system. The first
input is selectable as a Class A or Class B water flow input and the other
five zones are selectable from a menu of options including two-wire
smoke detection.
Description
The panel's 1.0 amp power supply powers the panel, charges the batteries
and supplies 0.5 amps to a notification appliance circuit and 0.5 amps of
auxiliary power. The auxiliary power is programmable as constant or resettable.
The control panel is in a metal cabinet with a key lock and lexan
window for viewing the system status. The printed circuit assembly is
mounted for quick removal and installation to allow the cabinet to be
installed with minimal effort. The cabinet houses up to two 12VDC, 18 AH batteries.
The display is a thirty-two (32) character LCD with system status LEDs. The system status is clearly displayed and the panel
includes a history buffer for past events.
The keypad allows navigation into the system menu, limited programming and system control. The condition and events on the
panel are clearly displayed to allow the user and installer to determine the system status.
The panel has a dual telephone line digital alarm communicator transmitter (DACT) built on-board. One or both telephone lines
may be enabled to allow communication to a remote monitoring station. In addition, an updated panel configuration may be sent
to the panel through the telephone lines. The panel has line in and line out to allow the panel to be installed ahead of other tele-
phone equipment on the premises.
The panel will support up to four (4) of the RA-6075 remote annunciators on the P-Link bus. These annunciators include a metal
enclosure with a key lock and provide full functionality of the system.
The panel is pre-programmed from the factory for monitoring a typical wet or dry fire sprinkler system. The programming may be
changed using the Potter Fire Panel Programmer (available free from www.pottersignal.com) and a standard Ethernet cable.
The NAC is listed for strobe synchronization and the panel is listed with Potter/AMSECO®, Gentex®, System Sensor®, and
Cooper Wheelock® signals. Please refer to the Potter Notification Compatibility Document for the maximum number of strobe
devices that may be connected. The maximum output is 0.5 amps.
The Ethernet connection may be connected to a building network with Internet to provide e-mail notifications of system status,
reports, or system configuration. In addition, the Ethernet connection is listed for IP reporting to a monitoring station.
Features
• 6 Programmable Initiating Device Circuits
• Class A or Class B Waterflow Initiating Circuit
• 2 Wire Smoke Detector Compatibility
• 1.0 Amp Power Supply
• 1 Notification Circuit rated at 0.5 Amps Regulated
• Strobe Synchronization for Potter/AMSECO®, Gentex®, System Sensor® and Cooper/Wheelock®
94
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
Features (cont'd)
• 0.5 Amp Auxiliary Power, programmable as Constant or Resettable
• 2 x 16 LCD display with system LEDs for clear system status
• Keypad for system features
• P-Link for Remote Annunciator Connections
• Capacity to charge and house 18AH batteries
• Onboard Dual Line Digital Alarm Communicator
• Built-in Ethernet Connection with listed IP Communicator
• Ability to E-mail system status, reports and system configuration
• Service Reminder E-mails
• Dimensions — 18 1/2" H x 14 1/4 W x 4 3/4" D
wire with 600V insulation Tip Ring Tip Ring Tip Ring Tip Ring
F
WARNING: RADIO FREQUENCY FROM U
TRANSMITTING DEVICES MAY IMPAIR INTENDED
S
E POTS DACT CONNECTION
OPERATION OF THE CONTROL UNIT. MAINTAIN
A MINIMUM OF 30 CM BETWEEN TRANSMITTING
ALARM SIGNAL ACTIVATION
DEVICES AND CONTROL UNIT. PRESS LEFT & RIGHT
ALARM SIGNAL ACTIVATION ARROW KEYS AT SAME
POWER ON ALARM PRESS LEFT + RIGHT ARROWS
AVERTISSEMENT : LES RADIOFRÉQUENCES ÉMISES EARTH FAULT SUPERVISORY
TIME TO TRIGGER ALARM
PAR LES DISPOSITIFS DE TRANSMISSION SILENCED TROUBLE 1 2 3 SIGNAL ACTIVATION.
PEUVENT NUIRE AU FONCTIONNEMENT PRÉVU
DU POSTE DE CONTRÔLE. MAINTENIR UNE SIGNAL
RESET
4 5 6
SILENCE
DISTANCE D’AU MOINS 30 CM ENTRE LES ONLY DETECTORS THAT ARE SHOWN IN
7 8 9 THE COMPATIBILITY LIST ARE TO BE USED.
DISPOSITIFS DE TRANSMISSION ET LE POSTE DE
ACK FIRE
CONTRÔLE. NOWLEDGE DRILL ENTER 0 ESC
LAMP TEST: PRESS [ENTER], [5],
Primary AC PASSWORD, [6]. PRESS THE [ESC] KEY
120VAC, 60Hz, .75 AMP WHEN DONE.
Min Low AC Detect 98VAC
Battery Charging
27.3VDC @ .5A
Low Battery Detect @20.4VDC FUS E
- + - + - + - + A B A- A+ B- B+ - + - + - + - + - +
BATTERY NAC AUX PLINK INPUT1 INPUT2 INPUT3 INPUT4 INPUT5 INPUT6
All Circuit Impedance Values
Short Circuit: 0 Ohms
Open Circuit: >10K
Earth Fault to any terminal: 0 Ohms
Main Fuse Specification E.O.L. E.O.L. E.O.L. E.O.L. E.O.L. E.O.L. E.O.L.
1.6A-250VAC Programming 6 Conventional Inputs, fully programmable
Connection & support 2-wire smoke detector
Batt. Fuse Specification
2.5A-250VAC Requirements
System must be fully tested after installation.
Intended for indoor use in dry locations only.
F.C.C. Battery + Separation of power limited wiring from non-power limited wiring must be at
Battery - least 1/4".
This device has been verified to comply with FCC Rules Part 15, Install in accordance with installation manual Part Number 5403559 - ___,
Class A Operation is subject to the following conditions: and Operating instructions - Part #5406282 - ___.
1. This device may not cause radio interference.
2. This device must accept any interference received including any See Smoke Detector Compatibility Identifer “A”
that may cause undesired operation.
NFPA Commercial Protected Premises Control Unit for UL Installations:
Acknowledgements 13, 70, and NFPA 72.
Gentex ®, Cooper Wheelock ®, and System Sensor ® synchronization NYC Fire Dept. Certificate of Approval #6159 & 6184
protocols used with permission. Cooper Wheelock Patent Nos. 5,400,009. Alarm activation requiring activation of two or more automatic detection
devices shall not utilize any time delay.
Potter Electric Signal Company LLC
Service Use for UL Installations:
PFC-6006 - Local
US: POTAL01BSMP - Remote Station
Complies with 47 CFR Part 68. - Proprietary
Made in USA. - Central Station
See board for Serial #. Battery connection (non-power limited). SERVICE USE AND COMMERCIAL PROTECTED PREMISES UNIT FOR ULC INSTALLATIONS:
Use two (2) 12V batteries connected in series.
WIRING METHODS SHALL BE IN ACCORDANCE WITH CSA C22.1, SAFETY STANDARD FOR
ELECTRICAL INSTALLATIONS, CANADIAN ELECTRICAL CODE, PART I, SECTIONS 32.
P/N 5406280 (10/31/2014) LOCAL SERVICE TYPES (NON-CODED): A, M, SS, WF.
95
IPA SYSTEMS TRAINING STUDENT GUIDE • REV. A 10/16
INSTRUCTOR NOTE: Handout the "Programming Exercises" handout, and instruct students to work
independently. If they need help, they should let you know. Stress the importance of completing all exercises
and taking the time to make corrections or changes. These exercises have been designed to reinforce all
learning topics addressed during the 2-day class.
The Instructor will distribute the "Programming Exercises" class handout. Please complete all exercises independently, and make
corrections, if necessary. The Instructor is available to answer questions whenever needed.
96