Documente Academic
Documente Profesional
Documente Cultură
1. EARTHWORKS
Tests:
For every 1500 cu m or fraction thereof:
1
Item 105: Subgrade Preparation
Tests: Same as for Item 104
2
At least one group of three in-situ density tests
for each 500 sq m or fraction thereof.
Tests:
A. Soil Aggregate:
For every 300 cu m or fraction thereof:
1-G, Grading test
1-P, Plasticity Test (LL, PL, PI)
D. Hydrated Lime
For every 100 T or fraction thereof
1-Q, Quality Test
Tests:
A. Soil Aggregate - Same as for Item 203
3
B. Cement
1-Q, Quality Test for every 2000 bags or fraction
thereof.
C. Water
1-Q, Quality Test/Project Engineer’s Certificate
D. Mix
For every 300 cu m or fraction thereof:
Tests:
A. Soil Aggregate - Same as for Item 203
B. Emulsified Asphalt
1-Q, Quality Test for every 40T or 200 drums or fraction
thereof.
Tests:
A. Soil Aggregate - Same as for Item 203
4
B. Portland Cement
For every 2000 bags or fraction thereof:
1-Q, Quality Test
C. Water
1-Q, Quality Test/Project Engineer’s Certificate
3. SURFACE COURSE
Quantity: 1 to 2 L per sq m
5
Tests: 1-Q, Quality Test for very 40 T or 200 drums
Quantity: 1 to 2 L per sq m
A. Bituminous Material:
B. Cover Aggregates
A. Aggregates
Quantity:
Using Cut-Back Asphalt or Asphalt Cement – 13.6 to 38.0 kg
per sq m
Using Emulsified Asphalt – 13.6 to 19.04 kg per sq m
Tests:
6
B. Bituminous Material:
Quantity:
Using Cut-Back Asphalt or Asphalt Cement – 1.58 to 2.04 Lit
per sq m
A. Aggregates
Quantity:
1. Using Asphalt Cement or Rapid Curing
B. Bituminous Material
Quantity:
A. Aggregates
B. Bituminous Materials
7
Quantity:
C. Mix
D. Hydrated Lime
E. Compacted Pavement
A. Aggregates
Tests:
For every 75 cu m/200 T or fraction thereof:
1-G & P, Grading and Plasticity Tests
8
B. Bituminous Materials
C. Mix
Tests:
For every 75 cu m per 130 T or fraction thereof:
1-G, Grading Test
1-Ext, Extraction Test
1- Sty, Stability Test
1-C, Laboratory Compaction Test
D. Hydrated Lime
E. Mineral Filler
Tests:
For every 75 cu m or fraction thereof
1-G & P, Grading and Plasticity Tests (LL, PL, PI)
F. Compacted Pavement
Tests:
D & T (Density & Thickness Tests) – At leas
one (1) but not more than three (3) samples
shall be taken.
A. Aggregates
9
B. Bituminous Materials
Quantity:
D. Hydrated Lime
E. Mineral Filler
F. Compacted Pavement
A. Aggregates
B. Bituminous Materials
C. Mix
D. Hydrated Lime
10
Tests: Same as for Item 307
E. Mineral Filler
F. Compacted Pavement
A. Aggregates
B. Bituminous Materials
Quantity:
5.0 to 8.0 mass percent of total dry aggregate
C. Mix
D. Hydrated Lime
E. Mineral Filler
F. Compacted Pavement
A. Cement
11
B. Fine Aggregates
Quantity:
1. 0.50 cu m/cu m of concrete (if rounded coarse aggregate
is used)
2. 0.54 cu m/cu m of concrete (if angular coarse aggregate is
used)
C. Coarse Aggregates
Quantity:
Test:
For every 1500 cu m or fraction thereof
a. For a source not yet tested, or failed in previous quality
tests:
12
For every 75 cu m or fraction thereof
1-G, Grading Test
D. Water
Tests:
1-Certificate from the Project Engineer or
1-Q, Quality Test, if source is questionable
E. Joint Filler
Test
1-Q, Quality Test on each type of ingredient for each
shipment
Test
1-Q, Quality Test on each type thickness for each
shipment
Test
1-Q, Quality Test for each shipment
G. Steel Bars
H. Concrete
Tests:
Flexural Strength Test on Concrete Beam Sample;
13
I. Completed Pavement
Tests:
Thickness determination by concrete core drilling on a
lot basis.
Five (5) holes per km per lane or five (5) holes per 500
m when 2 lanes are poured concurrently.
4. BRIDGE CONSTRUCTION
A. Timber Piles
Tests:
1- Inspection Report for each size and shipment of timber
B. Concrete Piles
a. Concrete
Tests: Same as for Item 405
b. Reinforcing Steel
Tests: Same as for Item 404
C. Structural Piles
Tests:
1-Q, Quality Test/Mill Test Certificate
1-IR, Inspection Report
A. Concrete
Tests: Same as for Item 405, Class C
B. Reinforcing Steel
Tests: Same as for Item 404
14
1-IR, Inspection Report for each size and shipment of
timber
Tests:
1-Q, Quality Test for Bending, Tension and Chemical
Analysis
A. Cement
Quantity: 40 kg/bag
B. Fine Aggregates
Quantity:
15
Tests: For every 1500 cu m or fraction thereof:
C. Coarse Aggregates
Quantity:
For Rounded For Angular
Tests:
1-Certificate from Project Engineer
16
1-Q, Quality Test, if source is questionable
Tests:
1-Q, Quality test on each thickness of filler for each shipment
F. Steel Reinforcements
Tests:
1-Q, Quality test for every 10,000 kg or fraction thereof for
each size
G. Concrete
Tests:
Compressive strength test on concrete cylinder samples. 1 set
consisting of 3 concrete cylinder samples shall be taken from
each day’s pouring and to represent not more than 75 cu m
of concrete or fraction thereof.
A. Concrete
B. Steel Reinforcements
C. Wire Strands
Tests: Same tests as for Item 403, 404, 405 and 411.
Elastomeric Bearing Pad will be tested to
determine its quality
Painting:
17
1-Q, One 20 lit can for every 100 cans or fraction thereof
1-Q, One 4 lit can for every 100 cans or fraction thereof
Tests:
1-Q, One 20 lit can for every 100 cans or fraction thereof
1-Q, One 4 lit can for every 100 cans or fraction thereof
A. Pipes
Tests:
1 Pipe for every 50 pieces: Strength, Absorption, and
Dimension
Alternative Requirements:
1-Inspection Report for each size for not more than 25 pieces
cast in the field
18
B. Mortar for Joints
Alternative Requirements:
1-Inspection Report for each size for not more than 25 pieces
cast in the field
B. Clay Pipe
Tests:
1-Pipe for every 200 pieces for each size, with a
minimum of 2 specimens for strength,
absorption and dimension
A. Concrete
19
Item 505: Stone Masonry
A. Cement
B. Fine Aggregate
C. Stone
Tests: Inspection Report
D. Water
A. Timber Piles
Tests: Inspection Report
A. Bed Course
Tests: Same as for Item 200
20
B. Steel Reinforcement
Tests: Same as for Item 404
C. Concrete
Tests: Same as for Item 405
6. MISCELLANEOUS STRUCTURES
A. Concrete
B. Joint Filler
Tests: Same as for Item 311
A. Concrete
Tests: Same as for Item 405, Class A
A. Concrete
Tests: Same as for Item 405
B. Reinforcing Steel
Tests: Same as for Item 404
C. Timber
Tests: Same as for Item 410
D. Paint
Tests: Same as for Item 411
21
Item 603: Guardrail
A. Steel Posts
Tests: Same as for Item 403
B. Timber Posts
Tests: Same as for Item 410
C. Concrete
Tests: Same as for Item 405
D. Reinforcing Steel
Tests: Same as for Item 404
E. Rail
Tests: Inspection Report
F. Paint
Tests: Same as for Item 411
A. Barbed Wire
Tests: Chain Link Fabric
B. Concrete Posts
Tests: Same as for Item 405
Steel Reinforcement: Same as for Item 404
22
Item 611: Tree Planting
Tests: Inspection Report
E. MATERIALS DETAILS
Concrete Pipes
Tests: Same as for Item 500
23
Item 709: Paints
Tests: Same as for Item 411
Reinforcing Steel
Tests: Same as for Item 404
Wire Ropes
Tests: Same as for Item 406
Fence
Tests: Same as for Item 604
Guardrail
Tests: Same as for Item 603
24