Documente Academic
Documente Profesional
Documente Cultură
Service Manual
Chassis: MSD6308
Product:
Ver 1.0
-2-
Service Manual
1. Precautions and notices
BEFORE SERVICING THE LCD TV, READ THE SAFETY PRECAUTIONS IN THIS
MANUAL.
Proper service and repair is important to the safe, reliable operation of all Hisense Electric Co.,
Ltd Equipment. The service procedures recommended by Hisense and described in this Service
t
operations require the use of tools specially designed for the purpose. The special tools
It is important to note that this manual contains various CAUTIONS and NOTICES which
should be carefully read in order to minimize the risk of personal injury to service personnel.
The possibility exists that improper service methods may damage the equipment. It is also
important to understand that these CAUTIONS and NOTICES ARE NOT EXHAUSTIVE.
Hisense could not possibly know, evaluate and advise the service trade of all conceivable ways
in which service might be done or of the possible hazardous consequences of each way.
Consequently, Hisense has not undertaken any such broad evaluation. Accordingly, a
serviceman that uses a service procedure or tools, which are not recommended by Hisense,
-3-
must first satisfy himself thoroughly that neither his safety nor the safe of the equipment
Hereafter throughout this manual, Hisense Electric Co., Ltd will be referred to as Hisense.
1.1 Warning
1.1.1
Critical components having special safety characteristics are identified with a by the Ref.
No. in the parts list. Use of substitute replacement parts, which do not have the same specified
Under no circumstances should the original design be modified or altered without written
permission from Hisense. Hisense assumes no liability, express or implied, arising out of any
t
en
id
nf
Co
DANGER CAUTION
1.1.2.
All ICs and many other semiconductors are susceptible to electrostatic discharges (ESD).
Careless handling during repair can reduce life drastically. When repairing, make sure that you
are connected with the same potential as the mass of the set by a wristband with resistance.
-4-
1. Never replace modules or other components while the unit is switched on.
2. When making settings, use plastic rather than metal tools. This will prevent any short
1.1.3
To prevent electrical shock, do not use this polarized ac plug with an extension cord, receptacle,
or the outlet unless the blades can be fully inserted to prevent blade exposure.
To prevent electrical shock, match wide blade or plug to wide slot, fully insert.
1.1.4
When replacement parts are required, be sure to use replacement parts specified by the
manufacturer or have the same characteristics as the original part. Unauthorized substitutions
t
en
1.1.5
Safety regulations require that after a repair the set must be returned in its original condition. In
-Note: The wire trees should be routed correctly and fixed with the mounted cable clamps.
-The insulation of the mains lead should be checked for external damage.
1.1.6
(1) Do not touch Signal and Power Connector while this product operates. Do not touch EMI
(2) Do not supply a voltage higher than that specified to this product. This may damage the
-5-
(3) Do not use this product in locations where the humidity is extremely high, where it may
be splashed with water, or where flammable materials surround it. Do not install or use the
product in a location that does no satisfy the specified environmental conditions. This may
(4) If a foreign substance (such as water, metal, or liquid) gets inside the panel module,
immediately turn off the power. Continuing to use the product may cause fire or electric
shock.
(5) If the product emits smoke, and abnormal smell, or makes an abnormal sound,
immediately turn off the power. Continuing to use the product, it may cause fire or electric
shock.
t
en
(6) Do not disconnect or connect the connector while power to the product is on. It takes
id
nf
Co
some time for the voltage to drop to a sufficiently low level after the power has been turned
off. Confirm that the voltage has dropped to a safe level before disconnecting or connecting
the connector.
(7) Do not pull out or insert the power cable from/to an outlet with wet hands. It may cause
electric shock.
(8) Do not damage or modify the power cable. It may cause fire or electric shock.
(9) If the power cable is damaged, or if the connector is loose, do not use the product:
(10) If the power connector or the connector of the power cable becomes dirty or dusty, wipe
-6-
(11) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
1.2 Notes
The work procedures shown with the Note indication are important for ensuring the safety of
the product and the servicing work. Be sure to follow these instructions.
• At all times other than when adjusting and checking the product, be sure to turn OFF the
t
en
id
nf
Co
POWER Button and disconnect the power cable from the power source of the TV during
servicing.
• To prevent electric shock and breakage of PC board, start the servicing work at least 30
seconds after the main power has been turned off. Especially when installing and removing the
power board, start servicing at least 2 minutes after the main power has been turned off.
• While the main power is on, do not touch any parts or circuits other than the ones specified. If
any connection other than the one specified is made between the measuring equipment and the
high voltage power supply block, it can result in electric shock or activation of the
• When installing the LCD module in, and removing it from the packing carton, be sure to have
-7-
• When the surface of the panel comes into contact with the cushioning materials, be sure to
confirm that there is no foreign matter on top of the cushioning materials before the surface of
the panel comes into contact with the cushioning materials. Failure to observe this precaution
may result in, the surface of the panel being scratched by foreign matter.
• When handling the circuit board, be sure to remove static electricity from your body before
• Be sure to handle the circuit board by holding the large parts as the heat sink or transformer.
Failure to observe this precaution may result in the occurrence of an abnormality in the soldered
areas.
• Do not stack the circuit boards. Failure to observe this precaution may result in problems
t
en
resulting from scratches on the parts, the deformation of parts, and short-circuits due to residual
id
nf
Co
electric charge.
• Routing of the wires and fixing them in position must be done in accordance with the original
routing and fixing configuration when servicing is completed. All the wires are routed far away
from the areas that become hot (such as the heat sink). These wires are fixed in position with
the wire clamps so that the wires do not move, thereby ensuring that they are not damaged and
their materials do not deteriorate over long periods of time. Therefore, route the cables and fix
the cables to the original position and states using the wire clamps.
• Perform a safety check when servicing is completed. Verify that the peripherals of the
serviced points have not undergone any deterioration during servicing. Also verify that the
screws, parts and cables removed for servicing purposes have all been returned to their proper
-8-
locations in accordance with the original setup.
intended to alert the user to the presence of uninsulated dangerous voltage within
the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
-9-
2. Product Specifications
Top:
HDT V INPUT
t
en
id
nf
Co
USB
HDMI
Flash
MSD6308
Tuner
HDMI VGA
- 10 -
Bottom:
t
en
id
nf
Co
- 11 -
2.1.2 Main board: 5650
Take LHD24N10NAM、LHD32N10NAM 、main board(5650)for example:
Top:
RSAG7.820.5650
t
en
id
nf
Co
Bottom:
- 12 -
2.2 MSD6308 includes product
1、HX2-2×20KLB400-BOE\ROH 2、
LHD24N10NAM V236BJ1-LE2 RSAG7.820.5650 RSAG7.820.5258
FFC-12-850\ROH
With user’s RC
t
en
id
nf
Note: Press “exit” key on the RC, which can exit factory OSD menu.
- 13 -
3.2 Factory OSD Menu
The Factory OSD Menu comprises Factory Menu and Design menu.
3.2.1、Factory Menu
White balance:
t
en
id
nf
Co
Option:
- 14 -
Init:
Version:
t
en
id
nf
Co
- 15 -
3.2.2、Design Menu
t
en
id
nf
Co
Note:
The above “Factory/Service OSD Menus” are reference only, please refer to the actual unit to
determine the appearances.
- 16 -
4. Software updating
Software updating includes boot write and main software update. Usually first write boot to nand flash
- 17 -
3、Choose “Eagle/Nugget NAND program”, And then a dialog window will show as below.
t
en
id
nf
Co
- 18 -
Now, introduce how to choose the file.
ARM \MIPS File button:
Load :supernova\target\isdb.nugget\boot\CreatRomBoot_050B_256x1\050B_TOOL.bin.
Program button:
After above all have chosen, then Click the “Program” button and wait write end. If “status” shows
*success,please reset power*, it indicates successful.
t
en
id
nf
Co
- 19 -
.4.2 Upgrading main software with Tftpd32、securecrt
t
en
id
nf
Co
- 20 -
AC power off the TV, this time the mouse must lies on the Securecrt interface.
then AC power on the TV, at the same time press “enter” key.
you will see“<<mstar>>#”on the Securecrt interface.
(the following image).
t
en
id
nf
Co
Next input : set ipaddr 192.168.5.200;set serverip 192.168.5.211;saveenv ,then press “enter”
key. late input: “mstar mscript/auto_update.txt”to update (the following image).
- 21 -
Note1
t
en
id
Note2:
nf
Co
- 22 -
4.3 Upgrading with the USB disk
t
en
id
nf
Co
4. Press the key on RC, it will show a confirm message box, Are you sure?
Press button to select “yes” in the confirm message box, then TV will automatic update.
5. Then it will update the software automatically, Please don’t power off during the updating
process.
- 23 -
6. After update succeeds, TV SET will restart automatically.
7. First update the Boot software, second update the main software. In order to
convenience, prepare two USB disks to save different software respectively.
- 24 -
5.Troubleshooting
YES
Try new batteries Replace battery
NO
YES
Replace RC Replace remote control
Check IR receiver
t
en
id
nf
Co
NO
YES
Change Led & IR cable Replace Led & IR cable
NO
- 25 -
5.2 Troubleshooting for Function Key
YES
Check switches Check solder connections and
NO
NO
YES
en
id
nf
Co
Change Key BD OK
NO
- 26 -
5.3 TV won’t Power On
TV won’t power on
NO
Is LED Check Power YES Make Sure Power
NO
YES
NO Check/replace IR
Only
BD or Keypad
Try Power on by
one works
t
PCA
en
YES
id
Source Neither
Both
NO YES works
Work
NO Replace Main
BD
Replace Main BD
NO YES
YES Power on OK
Replace Panel
NO
(to contact Hisense tech support.)
Replace Power BD
OK
- 27 -
5.4 Troubleshooting for Audio
No sound
YES
Check connecter Reconnect
NO
YES
Check speaker wire Replace speaker wire
NO
YES
Check speaker set Replace speaker set
t
en
NO
id
nf
Co
NO
- 28 -
5.5 Troubleshooting for TV/VGA/HDMI input
NO
Check Signal Source
Make sure signal
source is available
YES
Check connect Reconnect
NO
YES
t
en
NO
- 29 -
5.6 Troubleshooting for YPbPr input
YES
NO
YES
t
NO
- 30 -
5.7 Troubleshooting for Video input
YES
YES
Check connect Reconnect
NO
YES
t
Replace Cable/Wires
en
NO
6. Circuit instruction
- 31 -
7. Schematic circuit diagram
8. Explode View
t
en
id
nf
Co
- 33 -
5 4 3 2 1
IN SWITCH +5V_MHL/1A
0R
D D
MP1495 +1.15V_VDDC/3A
12V
TPS54328 5VAIN/3A 5VAIN 1117ADJ +1.5V_DDR/250MA
MSD6308RT
12V PWR-ON/OFF 5VAIN AMS1117-3.3V +3.3VAl/200MA
POWER IN
5VAIN AMS1117-3.3V 3.3V_Tuner/250MA
C C
HDMI1
HDMI输入X3
MHL HDMI2 NAND_FLASH
2GBITS
HDMI3
t
en
SPI FLASH
id
16MBITS
nf
Co
VGA输入X1 VGA I2C EEPROM
32KBITS
B
YUV
MSD6308RT B
L L_OUT
USB1 TAS5727
USB输入X2 R R_OUT
USB2
L
EARPHONE
网络输入X1 RJ45 R
AV_OUT
VGA_L/R
L/R_OUT
YUV_L/R
AV_L/R
IF1
IF2
TUNE输入 遥控接收、键控板
IF 音频输入X3 AV音视频 光感接收、指示板
A 输出 A
5 4 3 2 1
5 4 3 2 1
Power Input
12VS
BLM18PG330SN1D/NC VCC-A 5VAIN
L50
R9 R14 R15
XP21 R8
10k/NC 1k 4.7k R16
1 2 +12V 4.7k 0R
VCC-A BL-ON/OFF
R11
3
L51
BL-ADJUST 0R R73 BL 3 4 BL-ON/OFF BLM18PG330SN1D R22 0R 4.7k 1 V6 3.3VA R25
DIM_INPANEL 4
3
5 6 R10 1 MMBT3904LT1 0R/NC R26
12VS 12VS 2 VBL_CTRL VBL_CTRL V9
L53
2
12VS R20 DIM_OUTPANEL 4
STANDBY 7 8 BLM21PG220SN1D 10k/NC MMBT3904LT1/NC R17 0R/NC
R12 0R/NC 4.7k/NC
2
5VS 1k BL-ADJUST
9 10 5VAIN 5Vstb
3
VCC-AUDIO VCC-AUDIO
D L57 L43 BRI_ADJ 1 V10 5Vstb D
11 12 2 BRI_ADJ +3.3V_Standby R6
+12V L54 12VSTB R18
BLM18PG330SN1D/NC BLM18PG330SN1D/NC R13 MMBT3904LT1 C4
13 14 BLM21PG220SN1D/NC 4.7k/NC 10k
2
L58 4.7k 10u/16V/NC R1 R4
R42 0R DVDD3V3
BLM18PG330SN1D/NC 10k 10k
12VS 5Vstb +12V STANDBY
R19 0R R2 R5
3
0R/NC 4.7k
4 3D_EN_I C447 C448 C449 1 V1 R7
100R
3
4 3D_SYNC_DY MMBT3904LT1
10u/10V 10u/16V PWR-ON/OFF 1 V2
10u/16V
2
2 PWR-ON/OFF
MMBT3904LT1
2
R3 4.7k
5VS
5Vstb
VCC-AUDIO VCC-A L55
L52 BLM21PG220SN1D 5VAIN
BLM18PG330SN1D/NC
L56
BLM21PG220SN1D/NC
1
100n/16V S1 D1 BLM18PG121SN1/NC C33 100n/16V/NC 100n/16V
2 7 AO4459
R43 3 S2 D1 6 R78 10k
R46 1 8 3.3VA
+3.3V_Standby 4.7k 4 S3 D2 5 S1 D1 R29
G D2 C12 10k C16 2 7
R31
R44 3 S2 D1 6 C64 C13 R32 1k 10k
100n/16V 1u/16V S3 D2
4 5 0R/NC
100k +12V 22u/6.3V 1u/16V
3
G D2
C R40 R47 R33 10k 1 V8 1 V15
C
1k 2 PANEL_ON/OFF
MMBT3904LT1 MMBT3904LT1
R41 R38
3
2
C15 R48
3
10k 10k/NC C32
PWR-ON/OFF 1 V13 C44 10u/16V 1k 10k 100n/16V
2 PWR-ON/OFF 100n/16V V28 1 PWR-ON/OFF
H:ON MMBT3904LT1
L:OFF MMBT3904LT1
2
5
N7 5VS L07
L08 3 4
64
8 6 VIN VOUT
VIN SW BLM18PG121SN1
4.7 uH 2
VOUT
ADJ
:5
R235 C216
10k 1
EN VBST
7
R1 R224 C224
C234 C233 C235
C54
100n/16V
C60
10u/10V/NC
R59
1k
250mA
130k 22p/50V
MB
C230 C226 C56
1
100n/16V 22u/6.3V 22u/6.3V 22u/6.3V/NC 10u/10V
10u/16V 10u/16V/NC 3 2
VRG5 VFB R219
靠近DC-DC 22R/NC
EPAD
4
SS GND
5 R220 R229 SOT-223 R60
27k 140k
C225 C211 C212 TPS54528 C215 200R
9
Vout=0.765*(1+R1/R2)=5.16V
R1:130k, R2:27K//140K.
B B
Core Power 1.15V-MP1495(3A)
R250 R58
+12V 100k 10k
N8 +1.15V_VDDC
L09
2 3
IN SW
6.8uH C241
C37 R255
R35 C244 C31 C39 C231 15p/50V
7 1 C242 22k
100k 10u/16V 100n/16V10u/16V VCC SS
100n/16V
100n/16V 1n/50V R49 C243 C240 C247
6 5 R34 0R 22u/6.3V 22u/6.3V
EN/SYNC BST 100n/16V
10R R39
R36 82k
8 4
33k FB GND
R249
MP1495 48.7k
A A
R68 0R/NC
22u/6.3V22u/6.3V 100n/16V
0R
R28
180R
Main IC Max:300mA
BLM21PG220SN1D Hisense Electric Co.,Ltd.
No.11,Jiangxi Road,Qingdao,China
WWW.HISENSE.COM
Title
Hisense MSD6308RT
TS IN
PCM_D3 TS0_D3 FB VDDC AVDD_DDR_CMD0
R203 33R C204 47n/16VGIN0 AA18 AA15 B14 J10
5 VGA-G PCM_D4 TS0_D4 +1.15V_VDDC VDDC AVDD_DDR_CMD0
R204 33R C206 47n/16VBIN0 W19 Y15 C13
VGA 5 VGA-B Y17 PCM_D5 TS0_D5 Y14 C14 VDDC A16
AA19 PCM_D6 TS0_D6 V15 E14 VDDC AVDD_DDR_DATA0 J11
HSYNC0
5 VGA-HSYNC PCM_D7 TS0_D7 W15 F13 VDDC AVDD_DDR_DATA0 J12
5 VGA-VSYNC VSYNC0
N1E V19 TS0_CLK W16 G9 VDDC AVDD_DDR_DATA0 K12
U20 PCM_A0 TS0_VLD V16 G10 VDDC AVDD_DDR_DATA0
RIN0 H3 B9 MDI_RN W20 PCM_A1 TS0_SYNC G11 VDDC A17
GIN0N G2 RIN0P RN C9 MDI_RP MDI_RN 10 Y16 PCM_A2 AA13 G12 VDDC AVDD_DRAM B17
R207 33R C382 47n/16VRIN1
PHY
7 RGB1-YPBPR_RIN+ GIN0M RP MDI_RP 10 PCM_A3 TS1_D0 VDDC AVDD_DRAM
VGA
R205 68R C292 47n/16VGIN1N GIN0 G1 B8 MDI_TN P19 W13 H9
BIN0 G3 GIN0P TN C8 MDI_TP MDI_TN 10 R20 PCM_A4 TS1_D1 U13 J9 VDDC
YPBPR7 RGB1-YPBPR_GIN+ R206 33R C348 47n/16VGIN1 BIN0P TP MDI_TP 10 PCM_A5 TS1_D2 VDDC
G4 T18
TS OUT
R208 33R C376 47n/16VBIN1 HSYNC0 V13 M8
7 RGB1-YPBPR_BIN+ HSYNC0 PCM_A6 TS1_D3 VDDP VDDP
R298 0R C205 47n/16VSOG1 VSYNC0 G5 U19 T12 B13 N8
VSYNC0 Y19 PCM_A7 TS1_D4 T15 H10 DVDD_DDR VDDP
PCM_A8 TS1_D5 DVDD_DDR
PCM
D W21 U15 N9 AVDD_PLL D
PCM_A9 TS1_D6 AVDD_PLL
YPBPR
RIN1 K3 W17 U14
GIN1N J1 RIN1P Y20 PCM_A10 TS1_D7 T13 A13 M10
GIN1M PCM_A11 TS1_CLK DVDD_RX_0 AVDD_MOD AVDD_MOD
GIN1 J2 A12 USB0_DM U18 U12 H11 N10
H2 GIN1P DM_P0 B12 USB0_DM 6 V21 PCM_A12 TS1_VLD T14 DVDD_RX_0 AVDD_MOD
BIN1 USB0_DP
USB
BIN1P DP_P0 USB0_DP 6 PCM_A13 TS1_SYNC
SOG1 J3 AA7 USB1_DM U17
SOGIN1 DM_P1 USB1_DM 6 PCM_A14
Y7 USB1_DP K9 V3
DP_P1 USB1_DP 6 AVDDL_MOD AVDDL_MOD AVDD5V_MHL_C AVDD5V_MHL_C
T17 D4
PCM_CD_N AVDD5V_MHL_D AVDD5V_MHL_D
Close to MST IC L2 W18 1
RIN2P PCM_CE_N TP208
SCART
L3 AA20
AV Interface with wide trace K2
K1
GIN2M
GIN2P
Y21
V18
PCM_IORD_N
PCM_IOWR_N VIFP
V1
W1
VIFP DVDD_NODIE H7
DVDD_NODIE VSENSE_VDD
R15 1 TP201
VIFM
H5 BIN2P M1 AA16 PCM_IRQA_N VIFM J6 R13
CVBS
VIF
HSYNC2 CVBS1P PCM_OE_N AVDD_NODIE AVDD_NODIE GND_EFUSE
H4 N1 CVBS0 V20
R338 33R C349 47n/16V CVBS0 VSYNC2 CVBS0P N2 VCOM0 R21 PCM_REG_N Y1 IFAGC K5
7 AV1 VCOM PCM_RESET IFAGC AVDD_AU AVDD_AU33
M2 P20 R6 +1.2V_DEMOD
CVBS_OUT1 CVBS_OUT 7 R19 PCM_WAIT_N L5 MCP_VDDC R7
R223 68R C219 47n/16V VCOM0 PCM_WE_N AVDD_DMPLL AVDD3P3_DMPLL MCP_VDDC
AA3 TUNER_SW
TGPIO0 TUNER_SW 9
V2 P9 +3.3V_DEMOD
T10 TGPIO1 Y3 RST_AMP 9 K4 MCP_VDD33
MCP
NAND_ALE TUNER_SCL AVDD_DVI
11 NAND_ALE NAND_CEZ V8 NAND_ALE TUNER_I2C_SCL W2 TUNER_SDA TUNER_SCL 12 L4 AVDD_DVI_USB_MPLL R8
11 NAND_CEZ NAND_CEZ1 U8 NAND_CEZ TUNER_I2C_SDA TUNER_SDA 12 AVDD_DVI_USB_MPLL MCP_AVDD
11 NAND_CEZ1 NAND_CLE U9 NAND_CEZ1 R12
11 NAND_CLE NAND_DQS U11 NAND_CLE MCP_TESTPIN
11 NAND_DQS NAND_RBZ U7 NAND_DQS
11 NAND_RBZ NAND_REZ V7 NAND_RBZ
11 NAND_REZ NAND_REZ
NAND
NAND_WEZ T11
11 NAND_WEZ NAND_WPZ T7 NAND_WEZ A15
11 NAND_WPZ NAND_WPZ A18 GND M4
11 NAND_D[7:0] NAND_D0 Y8 B15 GND GND M6
NAND_D1 W9 NAND_AD0 B18 GND GND M9
NAND_D2 AA9 NAND_AD1 C15 GND GND M11
NAND_D3 W10 NAND_AD2 C18 GND GND M12
NAND_D4 Y10 NAND_AD3 D15 GND GND M13
NAND_D5 W11 NAND_AD4 D18 GND GND M14
NAND_D6 W12 NAND_AD5 E15 GND GND M15
NAND_D7 Y12 NAND_AD6 E18 GND GND N4
NAND_AD7 F15 GND GND N6
F18 GND GND N11
G7 GND GND N12
G8 GND GND N13
G15 GND GND N14
G18 GND GND N15
H6 GND GND P5
GND GND
PWM
7 AV-RIN MUTE_AMP K18 J19 LVA0P L8 T8
9 MUTE_AMP BRI_ADJ J18 AMP_MUTE LVA0P K19 LVA1N LVA0P 4 L9 GND GND T9
HD-LIN C381 2.2u/10V LINE_IN_1L 1 BRI_ADJ PWM_PM D9 BRI_ADJ LVA1N K20 LVA1P LVA1N 4 L10 GND GND U6
7 HD-LIN PWM_PM LVA1P LVA1P 4 GND GND
HD-RIN C354 2.2u/10V LINE_IN_1R L19 LVA2N L11 U10
7 HD-RIN LVA2N LVA2N 4 GND GND
L20 LVA2P L12 V6
LVA2P M21 LVACLKN LVA2P 4 L13 GND GND V10
VGA-LIN C430 2.2u/10V LINE_IN_2L N1C KEY0_IN E4 LVACKN M20 LVACLKP LVACLKN 4 L14 GND GND V12
5 VGA-LIN KEY0_IN LVACKP LVACLKP 4 GND GND
SAR
VGA-RIN C355 2.2u/10V LINE_IN_2R LED E5 N21 LVA3N L15 W8
5 VGA-RIN LED_R LVA3N LVA3N 4 GND GND
LINE_IN_0L P3 C2 HDMI0_RX0N HDMI0_RX0N 8 ARC_DET F7 M19 LVA3P L16 Y9
LINE_IN_0R R2 LINE_IN_0L A_RX0N C1 HDMI0_RX0P KEY1_IN F6 ARC_DET LVA3P N19 LVA4N LVA3P 4 GND GND Y11
LINE_IN_0R A_RX0P HDMI0_RX0P 8 KEY1_IN LVA4N LVA4N 4 GND
LINE_IN_1L U2 D3 HDMI0_RX1N POWER_DET F8 N20 LVA4P AA10
LVDS
LINE_IN_1L A_RX1N HDMI0_RX1N 8 POWER_DET LVA4P LVA4P 4 GND
HDMI A
LINE_IN_1R T3 D1 HDMI0_RX1P AA12
LINE_IN_1R A_RX1P HDMI0_RX1P 8 GND
LINE_IN_2L T2 D2 HDMI0_RX2N E19 LVB0N
Analog Audio
LINE_IN_2L A_RX2N HDMI0_RX2N 8 LVB0N LVB0N 4
靠近mstar IC LINE_IN_2R T1
LINE_IN_2R A_RX2P
E3 HDMI0_RX2P HDMI0_RX2P 8 SPI_SCK A10
PM_SPI_CK LVB0P
E20 LVB0P
LVB0P 4
SPI
R1 C3 HDMI0_CLKN SPI_SDI B10 F21 LVB1N
LINE_IN_3L A_RXCN HDMI0_CLKN 8 PM_SPI_DI LVB1N LVB1N 4
R3 B1 HDMI0_CLKP HDMI0_CLKP 8 SPI_SDO C11 F20 LVB1P
LINE_IN_3R A_RXCP B2 HDMI0_HPDIN SPI_CSN B11 PM_SPI_DO LVB1P G21 LVB2N LVB1P 4
HOTPLUGA HDMI0_HPDIN 8 PM_SPI-CSN LVB2N LVB2N 4
F1 HDMI0_SCL F19 LVB2P
DDCDA_CK HDMI0_SCL 8 MSD6308RT LVB2P LVB2P 4
F2 HDMI0_SDA HDMI0_SDA 8 G19 LVBCLKN
C
Audio Line Out 9 EARPHONE_OUTL
EARPHONE_OUTL
EARPHONE_OUTR
U5
V5 EARPHONE_OUTL
DDCDA_DA
PAD_ARC
E2
F3
HDMI_ARC
HDMI_CEC
HDMI_ARC 8
LVBCKN
LVBCKP
G20
H19
LVBCLKP
LVB3N
LVBCLKN
LVBCLKP
4
4
C
9 EARPHONE_OUTR EARPHONE_OUTR CEC HDMI_CEC 8 LVB3N LVB3N 4 MSD6308RT
H20 LVB3P
LINE_OUTL0 T4 HP_DEC C21 LVB3P J21 LVB4N LVB3P 4
AV-AUOUTL0 LINE_OUTL0 LINE_OUT_0L 8 HP_DEC UART_RX2 LVB4N LVB4N 4
7 AV-AUOUTL0 AV-AUOUTR0 LINE_OUTR0 LINE_OUTR0 T5 W5 HDMI2_RX0N HDMI2_RX0N 8 MUTE_DRV632 C20 J20 LVB4P
7 AV-AUOUTR0 LINE_OUT_0R C_RX0N Y5 HDMI2_RX0P 8 MUTE_DRV632 UART_TX2 LVB4P LVB4P 4
C_RX0P HDMI2_RX0P 8
U3 W6 HDMI2_RX1N HDMI2_RX1N 8 D20
LINE_OUT_2L C_RX1N LDE
HDMI C
U4 Y6 HDMI2_RX1P UART-RX E7 D19
R294 C259 R295 C257 LINE_OUT_2R C_RX1P HDMI2_RX1P 8 M_UART0_RX LCK
AA6 HDMI2_RX2N UART-TX D7 D21
C_RX2N HDMI2_RX2N 8 M_UART0_TX LVSYNC
W7 HDMI2_RX2P M_I2C_SCL B21 C19
200k 1n/50V 200k 1n/50V MSD6308RT C_RX2P AA4
HDMI2_RX2P 8
B20 M_I2C_SCL LHSYNC
HDMI2_CLKN HDMI2_CLKN 8 M_I2C_SDA
AUVAG N3 C_RXCN Y4 HDMI2_CLKP M_I2C_SDA
VAG C_RXCP HDMI2_CLKP 8
GPIO
AUVRM P2 V4 HDMI2_HPDIN R18
VRM HOTPLUGC
DDCDC_CK
W4 HDMI2_SCL
HDMI2_HPDIN
HDMI2_SCL
8
8
TCON0
TCON1
P17 CORE POWER
W3 HDMI2_SDA N18 +1.15V_VDDC
TCON
DDCDC_DA HDMI2_SDA 8 TCON2
LOCAL DIMMING
F12 L17 N17 AVDDL_MOD
E12 I2S_IN_BCK C6 HDMI3_RX0N L18 SPI1_CK TCON3 P16
I2S_IN_WS D_RX0N HDMI3_RX0N 8 SPI1_DI TCON4
D12 B5 HDMI3_RX0P M18 N16
I2S_IN_SD D_RX0P HDMI3_RX0P 8 SPI2_CK TCON5
C5 HDMI3_RX1N M16 R17
D_RX1N HDMI3_RX1N 8 SPI2_DI TCON6
HDMI D
GPIO_PM
DDCDD_DA HDMI3_SDA 8 PM_RX/VBL_CTRL VBL_CTRL 1
A7 FLASH_WP 1 TP204
FLASH_WP DDR3 POWER
SPDIF MHL
5
L1 C367 F4 MHL_CABLE-DET
MHL_CABLE_DET MHL_CABLE-DET 8
C299 XTALI AA2 F5 MHL_VBUS-EN MHL_VBUS-EN 8 C350 C249 C371 C253 C366 C332 C255 C261
100n/16V XTALO Y2 XTALIN MHL_VBUS_EN
64
BLM18AG102SN1 4.7u/10V XTALOUT 1u/10V/NC
10u/10V 2.2u/10V 100n/16V 100n/16V/NC
100n/16V 100n/16V 100n/16V/NC
Close to MSTAR IC
with width trace MSD6308RT Close to MST IC
:5
MSD6308RT
SPDIF_OUT
MB
C365
33p/50V/NC
Close to MSTAR IC Standby Power 3.3V
AVDD_DMPLL +3.3V_Standby AVDD_AU
+3.3V_Standby AVDD_DVI AVDD_NODIE
L06 L7
BLM18PG121SN1 BLM18PG121SN1
10u/10V
C286
100n/16V/NC
C278
100n/16V
C281 C373
100n/16VNC100n/16V/NC
100n/16V/NC
C383 C280
100n/16V
C282C283
100n/16V
100n/16V/NC
R376 R328
100k 0R
R339
EEPROM &HDCP
3.3VA
FLASH 1M
R363
R352
1k
POWER_DET
KEY PAD& IR
100k XP8
1 IR_IN
C108 2
R596 R597 R598 +3.3V_Standby 3 LED_CTL_IR +3.3V_Standby
N50 when detect source is from 5V, L21 R643 0R/NC +3.3V_Standby
1 8 4.7k 4.7k 4.7k R129 4 BLM18PG121SN1
A0 VCC 100n/16V change resistance ,make sure 5 R638 0R
N55 10k/NC 5Vstb
detect power 1VPP. 6
2 7 EEPROM_WP 8 1 SPI_CSN 7 R428 10R KEY0 C648
A1 WP 7 VDD CE#_0 2 SPI_SDO 8 R650 0R 100n/16V
SPI_SCK 6 HOLD#_6 SO 3 #F_WP 9 KEY1
R429 10R
Other
SPI_SDI 5 SCK WP#_2 4 10 0R/NC LED_CTL0
3 6 M-SCL SI VSS
R648
A2 SCL C200 11 3D_TB
12 R649 0R
M25P32VMNKH25L3205DM2C-12G/NC
100n/16V/NC
4 5 M-SDA R130 13
GND SDA 软件必须要做写保护 4.7k/NC
3D_TB
M-SCL R377 100R M_I2C_SCL
15
14
AT24C32N-10SI-2.7 4,9 M-SCL 7
C128 C127 M-SDA R379 100R M_I2C_SDA
4,9 M-SDA
33p/50V 33p/50V
I2C address at A0.
8 ARC_DET ARC_DET 5Vstb
5Vstb
5VAIN +3.3V_Standby R212
NC/10k
R210 R211 LED_CTL_IR
3
L22 10k 0R
BLM18PG121SN1/NC C183 R213 1 V26
3
C187 10k/NC MMBT3904LT1/NC
LED R209 10k 1 V20
RESET System XTAL R176 R175 100n/16V 2.2u/10V
2
DEBUG
I2S
6
5
2.2k 2.2k MMBT3904LT1
4
2
5Vstb 3 KEY1 R225 0R R198 1k KEY1_IN C196
Close to Mstar IC 2 100n/16V
1 KEY0 R228 0R R192 1k KEY0_IN
R221 R222
+3.3V_Standby XTALO R82 0R C52 20p/50V XP5 XP9
1 4.7k 4.7k I2S-OUT-WS R79 33R C201 C203
R168 I2S-OUT_WSO 9 1n/50V 1n/50V
1
3
2.2u/10V 100k 1n/50V 10k 0R/NC
R214 1 V29
3
R177 10k MMBT3904LT1
NOTE:晶体频偏需要小于30PPM 4.7k/NC LED0 R216 10k 1 V27
2
MMBT3904LT1
2
IR_IN R190 IRIN C199
100R 100n/16V
C189
20p/50V
A A
5 4 3 2 1
5 4 3 2 1
MSD MIU
AVDD_DRAM
D D
N1A
R304
1k
MIU0
DDR3_RESETB A19
DDR3_CKE A20 DDR3_RESETB
B19 DDR3_CKE
ZQ
R306 R305
1k 240R
C C
MSD6308RT
5
64
:5
MB
S5 S1 S4
B
M1 M2 M3 B
D4 D4 D4
S6 S2 S3
Q1
D4 D4 D4
1
2
3
4
XP18 FI-RES-HF-51
+12V
1
XP15 2
1 2 3 LVA0N
3 4
R284 0R/NC PWM1_PANEL 4
5
VCC-Panel Power decouple LVA0P
LVA1N
LVA0N
LVA0P
2
2
6 LVA1N 2
R718 0R/NC PWM2_PANEL LVA1P
GPIO08 R5020R/NC 5 6 7 LVA1P 2
2脚为L/R帧同步,去TCON XP6 1脚为从TCON来的L/R帧同步 LVA2N
8 LVA2N 2
R281 LVA2P
3D_SYNC_I_P 2 1 3D_SYNC_O_P GPIO07 3D_SYNC_I_P 7 8 3D_SYNC_O_P 9 BIT_SEL LVA2P 2
LVACLKN
10 LVACLKN 2
100R_NC R717 VCC-Panel LVACLKP
PWM2_PANEL 4 3 PWM1_PANEL PWM2_PANEL 9 10 PWM1_PANEL 0R/NC 11 LVA4P LVACLKP 2
LVA3N
R716 0R/NC 12 LVA4N LVA3N 2
LVA3P
LVA4N 6 5 LVA4P LVA4N 11 12 LVA4P 13 LVA3P LVA3P 2
LVA4N
14 LVA3N LVA4N 2
LVA4P
LVA3N 8 7 LVA3P LVA3N 13 14 LVA3P 15 C436 LVA4P 2
16 LVACLKP LVB0N
LVACLKN 10 9 LVACLKP LVACLKN 15 16 LVACLKP 17 LVACLKN C453 10u/16V LVB0P
LVB0N 2
D 18 100n/16V LVB1N
LVB0P 2 D
LVA2N 12 11 LVA2P LVA2N 17 18 LVA2P 19 LVA2P LVB1N 2
LVB1P
20 LVA2N LVB1P 2
LVB2N LVB2N 2
LVA1N 14 13 LVA1P LVA1N 19 20 LVA1P 21 LVA1P LVB2P
22 LVA1N LVB2P 2
LVBCLKN
LVA0N 16 15 LVA0P LVA0N 21 22 LVA0P 23 LVA0P LVBCLKN 2
LVBCLKP
24 LVA0N LVBCLKP 2
LVB3N
18 17 23 24 25 3D_SYNC_I_P LVB3N 2
LVB3P
26 3D_EN_I Note:靠近LVDS插座 LVB4N
LVB3P 2
LVB4N 20 19 LVB4P LVB4N 25 26 LVB4P 27 LVB4P LVB4N 2
LVB4P
28 LVB4N LVB4P 2
LVB3N 22 21 LVB3P LVB3N 27 28 LVB3P 29 LVB3P 3D_EN_I
30 LVB3N 3D_EN_I 1
3D_SYNC_DY
LVBCLKN 24 23 LVBCLKP LVBCLKN 29 30 LVBCLKP 31 3D_SYNC_DY 1
M-SCL
32 LVBCLKP M-SCL 2,9
M-SDA
LVB2N 26 25 LVB2P LVB2N 31 32 LVB2P 33 LVBCLKN M-SDA 2,9
DIM_OUTPANEL
34 DIM_OUTPANEL 1
DIM_INPANEL
LVB1N 28 27 LVB1P LVB1N 33 34 LVB1P 35 LVB2P DIM_INPANEL 1
DVDD3V3 DVDD3V3 3D_EN
36 LVB2N 3D_EN 2
3D_TB 3D_TB 4
LVB0N 30 29 LVB0P LVB0N 35 36 LVB0P 37 LVB1P
38
R580 0R/NC
R714 0R/NC LVB1N R263
R715 0R/NC R257
BIT_SEL 32 31 LD_EN BIT_SEL 37 38 LD_EN 39 LVB0P DVDD3V3 4.7k/NC 4.7k/NC
R792
40 LVB0N M-SCL 3 2 I2C-SCL-3D
3D_EN_I 34 33 SEL DIM_INPANELR282100R/NC 3D_EN_I 39 40 SEL R278 100R/NCDIM_OUTPANEL 41
42 LD_EN 100R
V51
I2C-SDA-3D 36 35 I2C-SCL-3D AI R280 I2C-SDA-3D 41 42 I2C-SCL-3D R277 100R/NC SEL 43 PWM1_PANEL R445 2N7002K/NC
100R/NC 44 PWM2_PANEL 4.7k/NC R267
1
38 37 43 44 45 SEL 10k
46 0R/NC RESERVED VCC-Panel
40 39 45 46 47 3D_SYNC_O_P R419 C479
61 48 R444 4.7u/10V
42 41 47 48 60 49 I2C-SDA-3D 10K/NC R266
VCC-Panel VCC-Panel R498 100R
59 50 I2C-SCL-3D 24k
44 43 49 50 58 51 R497 100R
VCC-Panel VCC-Panel
57 52
56 53
LVDS PORT A DVDD3V3 DVDD3V3
55
54
R265 R617 0R/NC R256
4.7k/NC 4.7k/NC
R791
M-SDA 3 2 100R I2C-SDA-3D
C V50 C
2N7002K/NC R262
10k VCC-Panel
1
DVDD3V3 DVDD3V3 C511
3D_SYNC DVDD3V3
3D_SYNC to POWER 4.7u/10V
R264
24k
DVDD3V3 R425 R348 R343
10k 1k/NC 4.7k/NC
R422 3D_SYNC_DY
3D_SYNC_I
R432 3D_SYNC_O R342 0R 3D_SYNC_DY
4.7k/NC 0R/NC R344
3
4.7k/NC
3D_EN
3D_SYNC_I为给屏的30Hz同步信号 DVDD3V3 DVDD3V3
5
64
R327 R341
4.7k/NC
:5
4.7k/NC
3D_EN R330 R340 3D_EN_I
MB
0R 0R
3
R329 R332
该芯片的作用是将屏发出的SG方波信号转换成眼镜能识别的方波信号转换成38KHz红外载波方式的信号 1 V33
3D_SYNC MCU 10K
4.7k/NC MMBT3904LT1/NC
3D_FS_VCC
2
3D_FS_VCC 5VAIN DVDD3V3
DVDD3V3
L61 R390 R353 R346
BLM18PG121SN1 10k 10k 10k
5VAIN N101 R350 R417 R385 R386
3D_FS_VCC
L62 10k 10k 0R 0R/NC
1 8
VDD VSS
BLM18PG121SN1/NC
C316 C317
2 7
10u/10V 100n/16V CLKIN ICSPDAT
B 3D_FS_VCC XP10 MEMC_ON/OFF B
3 6 3D_TB 1
CLKOUT ICSPCLK 2 DVDD3V3 DVDD3V3
3
R354 4 5
R384 VPP COUT R484 R483
4.7k/NC C340
4
5
3
from panel
GPIO08 R408 0R 3D_SYNC_O R366 2 A VCC R480 R481 1 V45
3 B 4 R387 100R 调制好的78K SG同步信号 10K PWM1_PANEL R488 PWM1_P
GPIO07 R360 3D_SYNC_I R3800R GND Y 4.7k/NC MMBT3904LT1/NC
from 5652 0R/NC R486 0R 0R/NC DIM_INPANEL
2
0R SN74AHC1G86DBVT/NC
R389 C319
15p/50V PWM2_PANEL R487 PWM2_P
10K
3D_FS_VCC DVDD3V3 5VAIN
0R 0R/NC
LD_EN R496 DIM_OUTPANEL
DVDD3V3 DVDD3V3
R420 R402 R413
R392 10k 10k/NC 10k
10k/NC R401 R479 R478
3D_TB 4.7k/NC 4.7k/NC 3D_SYNC_I_P R494 0R/NC AI
3
V44
3
3
1k
2
2
R491 0R 3D_SYNC_O
XP11
DVDD3V3 DVDD3V3 DVDD3V3
A 1 PWM1_P A
2 PWM2_P
3 3D_EN_I
R463 R466 R465 4
4.7k/NC 4.7k/NC 4.7k/NC
6
5
VGA 16
6
D D
11
1 VGA-R
VGA-R 2
7
12 VGA_TX
2 VGA-G
VGA-G 2
8
13 HS-RGB R232 100R HS_RGB
VGA-HSYNC 2 VGA_RX R231 0R
3 VGA-B UART_RX 2
VGA-B 2 VGA_TX R227 0R
9 UART_TX 2
14 VS-RGB R234 100R VS_RGB
VGA-VSYNC 2
4
10 RV45 RV46
15 VGA_RX
5 R230 R252
10k
AVLC18S02015 10k
AVLC18S02015
XS2
VGA-B
17
C C
VGA-G
VGA-R
5
64
XS3 R112
:5
R 3 VGA-RIN 2
4
MB
WR
2 10k
WL R115
L 1 12k C68
GND5 560p/50V
CKX-3.5-111\REFLOW
R101
B VGA-LIN 2 B
USB INTERFACE
5VAIN
5V_USB
5V_USB
D C83
C83靠近USB插座放置 1
F1
2 USB POWER D
100u/25V
D+ 4 USB0_DP 2
N15
GND
4 1 RV2 ULCE0505A015FR
Vp GND
5
6
RV3 ULCE0505A015FR
3 2
I/O2 I/O1
C ESDA6V8UBA C
5
64
:5
5V_USB
C84靠近USB插座放置
MB
C84
100u/25V
C132 10u/16V
XP4
B B
1
VCC 2 R127 5.1R USB1_DM
D- 3 USB1_DM 2
R128 5.1R USB1_DP
GND
D+ 4 USB1_DP 2
N16
GND
4 1 RV4 ULCE0505A015FR
Vp GND
5
6
RV5 ULCE0505A015FR
3 2
I/O2 I/O1
ESDA6V8UBA
5 4 3 2 1
5 4 3 2 1
COAXIAL OUT
N18
C602 R612 10k 1 10 R609 10k C609
XS13 2 AV-AUOUTR0 -INR -INL AV-AUOUTL0 2
C267 1u/10V 1u/10V
R373 R616 68k 2 9 R613
1 SPDIF_OUT SPDIF_OUT 2 OUTR OUTL
黄 SIGNAL1 3 68k
AVLC18S02015
SIGNAL3 RV65 3 8 R614 47R LINEOUTL
2 100n/16V 100R R615 EN GND
GND LINEOUTR 47R
R375 C268 4 7
R378 3.3VA
D 3.3VA PVSS PVDD D
10k 200R 220p/50V/NC 5 6
CN CP C608
R611
4.7k C610 1u/10V
1u/10V AS9604
C612
1u/10V
3
CLOSED TO MSD6308 R610
1 V37 C611
9 MUTE_632
MMBT3904LT1 4.7u/10V/NC
10k
2
AV Input
VIDEO_OUT
CVBS1-RCA
RV41 AV1 2
V/Y 8
4 CVBS1-RCA CVBS1-RCA
3
7 AV_R R236 5VAIN
R/PB
L/PR 2
6 AV_L 75R
RV42 C41
GND 5
1 AV_L
XS4
AV_R R237 10k AV-RIN R83
AV-RIN 2
AV_L R239 10k AV-LIN V39 R77 100n/16V
RV43 AV-LIN 2 V/Y 8
4 AVOUT-V 470R
2
R238 R806 0R/NC AVOUT-V
AV_R R/PB 3
7 LINEOUTR 47k
C 12k C213 1 V17 C
R240 L/PR 2
6 LINEOUTL MMBT3906LT1
3
12k 1 C1111 10u/16V
560p/50V GND 5
1 CVBS_OUT 2
3
560p/50V
C214 XS5 AVOUT-V R81 R90 MMBT3904LT1 C1112 10u/16V
2
75R 75R
R92 R84 R805 RV152
RV151 75R 33k AVLC18S02015/NC
75R/NC
AVLC18S02015
HDTV Input
5
64
:5
MB
XS7
左 RV36
1 RGB1-YPbPr_GIN+ RGB1-YPbPr_GIN+
绿 SIGNAL1 3 RGB1-YPbPr_GIN+
RGB1-YPBPR_GIN+ 2
SIGNAL3 2 RGB1-YPbPr_BIN+
GND RGB1-YPBPR_BIN+ 2
RGB1-YPbPr_RIN+
RGB1-YPBPR_RIN+ 2
中 RV37
4 RGB1-YPbPr_BIN+ RGB1-YPbPr_BIN+
蓝 SIGNAL4 6 R244 R245 R246
SIGNAL6 5 75R 75R 75R
GND_1
右 RV38
7 RGB1-YPbPr_RIN+ RGB1-YPbPr_RIN+
红 SIGNAL7
B B
9
SIGNAL9 8
GND_4
A A
HDMI1
VD94
20
21
22
23
XS18
1 HDMI0-RX2P
靠近IC放置 HDMI0-5V 2
GND1
GND2
GND3
GND4
DATA2+ 2 3
DATA2S 3 HDMI0-RX2N
DATA2- RP3 ESDA6V8UE
4 HDMI0-RX1P HDMI0-RX2P 8 1 HDMI0_RX2P 1 HDMI0-RX1P 4 3 HDMI0-RX2N
D DATA1+ HDMI0_RX2P 5VAIN
2 C264 D
5 HDMI0-RX2N 7 2 HDMI0_RX2N IC1 I/O3
DATA1S HDMI0_RX2N 2 100n/16V
6 HDMI0-RX1N HDMI0-RX1P 6 3 HDMI0_RX1P 5 2
DATA1- HDMI0_RX1P 2 BAT54C
7 HDMI0-RX0P HDMI0-RX1N 5 4 HDMI0_RX1N R581 R568 VCC GND
DATA0+ HDMI0_RX1N 2
8 0R 10k 10k HDMI0-RX1N 6 1 HDMI0-RX2P
DATA0S 9 HDMI0-RX0N IC2 I/O1
DATA0- HDMI0-5V
10 HDMI0-CLKP RP4 HDMI0-SCL R569 22R VD20
CLK+ HDMI0-RX0P 8 1 HDMI0_RX0P HDMI0_SCL 2
11 HDMI0_RX0P 2 HDMI0-SDA R285 22R
HDMI0_SDA 2
R521 R520
CLKS 12 HDMI0-CLKN HDMI0-RX0N 7 2 HDMI0_RX0N 1k 10k VD21
HDMI0_RX0N 2 RV58
CLK- 13 CEC HDMI0-CLKP 6 3 HDMI0_CLKP RV53
CEC HDMI0_CLKP 2 HDMI0-RX0P 1 6 HDMI0-CLKN
14 HDMI-ARC HDMI0-CLKN 5 4 HDMI0_CLKN HDMI0-HPD V21 I/O1 IC2
HDMI0_CLKN 2
3
NC 15 HDMI0-SCL 0R ASES12U020R2 2 5
SCL 16 HDMI0-SDA ASES12U020R2 1 R519 HDMI0_HPDIN GND VCC
SDA HDMI0_HPDIN 2
17 4.7k HDMI0-RX0N 3 4 HDMI0-CLKP
CEC/GND 18 MMBT3904LT1 I/O3 IC1
2
+5V HDMI0-5V
19 HDMI0-HPD
HPDET ESDA6V8UE
DC1R019JB1
HDMI2
20
21
22
23
XS19
1 HDMI2-RX2P
靠近IC放置 5Vstb
GND1
GND2
GND3
GND4
DATA2+ 2 MHL-CD-SENSE1
DATA2S 3 HDMI2-RX2N RP2
DATA2- ESDA6V8UE
4 HDMI2-RX1P HDMI2-RX2P 8 1 HDMI2_RX2P HDMI2-RX1P 4 3 HDMI2-RX2N
DATA1+ HDMI2_RX2P 2 C262
5 HDMI2-RX2N 7 2 HDMI2_RX2N IC1 I/O3
DATA1S HDMI2_RX2N 2 100n/16V
6 HDMI2-RX1N HDMI2-RX1P 6 3 HDMI2_RX1P 5 2
DATA1- HDMI2_RX1P 2
7 HDMI2-RX0P HDMI2-RX1N 5 4 HDMI2_RX1N R562 R560 VCC GND
DATA0+ HDMI2_RX1N 2
8 0R 10k 10k HDMI2-RX1N 6 1 HDMI2-RX2P
DATA0S 9 HDMI2-RX0N HDMI2-RX0P R575 HDMI2_RX0P IC2 I/O1
0R HDMI2_RX0P 2
DATA0- 10 HDMI2-CLKP HDMI2-RX0N R576 HDMI2_RX0N HDMI2-SCL R566 22R
0R HDMI2_RX0N 2 HDMI2_SCL 2 VD18
CLK+ 11 HDMI2-SDA R283 22R
CLKS HDMI2_SDA 2 VD19
12 HDMI2-CLKN HDMI2-CLKP R577 0R HDMI2_CLKP RV57
C CLK- HDMI2_CLKP 2 RV52 C
13 CEC HDMI2-CLKN R574 0R HDMI2_CLKN HDMI2-RX0P 1 6 HDMI2-CLKN
CEC HDMI2_CLKN 2
14 HDMI2-HPD R548 33R HDMI2_HPDIN I/O1 IC2
NC 15 HDMI2-SCL HDMI2_HPDIN 2
ASES12U020R2 2 5
SCL 16 HDMI2-SDA ASES12U020R2 GND VCC
SDA 此HDMI port IC内置hotplug
17 HDMI2-RX0N 3 4 HDMI2-CLKP
CEC/GND 18 I/O3 IC1
+5V HDMI2-5V
19 HDMI2-HPD
HPDET ESDA6V8UE
DC1R019JB1
HDMI3
VD92
20
21
22
23
XS17
1 HDMI3-RX2P
靠近IC放置 HDMI3-5V 2
GND1
GND2
GND3
GND4
DATA2+ 2 3
DATA2S 3 HDMI3-RX2N
DATA2- RP1 ESDA6V8UE
4 HDMI3-RX1P HDMI3-RX2P 8 1 HDMI3_RX2P 1 HDMI3-RX1P 4 3 HDMI3-RX2N
DATA1+ HDMI3_RX2P 5VAIN
2 C223
5 HDMI3-RX2N 7 2 HDMI3_RX2N IC1 I/O3
DATA1S HDMI3_RX2N 2 100n/16V
5
6 HDMI3-RX1N HDMI3-RX1P 6 3 HDMI3_RX1P 5 2
DATA1- HDMI3_RX1P 2 BAT54C
7 HDMI3-RX0P HDMI3-RX1N 5 4 HDMI3_RX1N R551 R553 VCC GND
64
DATA0+ HDMI3_RX1N 2
8 0R 10k 10k HDMI3-RX1N 6 1 HDMI3-RX2P
DATA0S 9 HDMI3-RX0N IC2 I/O1
RP5 HDMI3-5V
DATA0- 10 HDMI3-CLKP HDMI3-RX0P 8 1 HDMI3_RX0P HDMI3-SCL R564 22R
CLK+ HDMI3_RX0P 2 HDMI3_SCL 2 VD10
:5
11 HDMI3-RX0N 7 2 HDMI3_RX0N HDMI3-SDA R276 22R R516 R517
CLKS HDMI3_RX0N 2 HDMI3_SDA 2
12 HDMI3-CLKN HDMI3-CLKP 6 3 HDMI3_CLKP RV56 1k 10k VD11
CLK- HDMI3-CLKN 5 4 HDMI3_CLKN HDMI3_CLKP 2 RV51
13 CEC HDMI3-RX0P 1 6 HDMI3-CLKN
CEC HDMI3_CLKN 2 HDMI3-HPD V22
MB
14 0R I/O1 IC2
3
NC 15 HDMI3-SCL ASES12U020R2
ASES12U020R2 2 5
SCL 16 HDMI3-SDA 1 R518 HDMI3_HPDIN GND VCC
SDA HDMI3_HPDIN 2
17 4.7k HDMI3-RX0N 3 4 HDMI3-CLKP
CEC/GND 18 MMBT3904LT1 I/O3 IC1
2
+5V HDMI3-5V
19 HDMI3-HPD
HPDET ESDA6V8UE
B DC1R019JB1 B
A A
5 4 3 2 1
5 4 3 2 1
SPEAKER AMP
MUTE
R316 0R/NC VCC-AA
VCC-AA
1
5VAIN R317 0R/NC
R321 VD13 5VAIN
+12V R318 0R/NC POP_MUTE_DRV632 L66
VZ2 1k/NC 1N4148W R333 10k 5VAIN
LM3Z10VT1G/NC C463 3.3VA 3.3VA
BLM21PG220SN1D
1u/50V L89 L90
2
1
2
R326 R443 C96
4.7k VCC-A VCC-AA BLM18PG181SN1 BLM18PG181SN1
1k 220u/25V
R437 1N4148W
C342 10u/16V C411 10u/16V
D VD17 L72 BLM18PG121SN1 C324 1u/50V D
100k
1
3
VD12 C334 1u/50V
1
1N4148W R426 0R/NC SHUTDOWN R331 1 V30 C343 1u/50V
V31 VD15
3
4.7k MMBT3904LT1
R442 0R/NC 2 3 POWER_OFF-MUTE 1 2 PWD_MT R371 10k 1 V23
2
2
R337 C250
44
45
40
41
34
35
13
27
MMBT3906LT1 MMBT3904LT1
2
3
1 2 R441 1N4148W 4.7k 2.2u/10V/NC R334 N80
2
C356 R447 VD14 1N4148W 100k/NC R415
100k/NC
AVDD
PVDD_A
PVDD_B
PVDD_C
PVDD_D
DVDD
PVDD_A_7
PVDD_B_46
PVDD_C_29
PVDD_D_44
VD16 10k
10u/16V 1M/NC R448 NC/4.7R C456 NC/1n/50V
2 MUTE_AMP MUTE_S1 2 L59
2 I2S-OUT_MCKO I2S-OUT_MCKOR509 0R 15 1 AMP-Rout+
1N4148W I2S-OUT_BCKO R510 0R 21 MCLK OUT_A 15.0 uH
2 I2S-OUT_BCKO SCLK C341 C454
I2S-OUT_WSO R490 0R 20 4 33n/50V C417
2 I2S-OUT_WSO LRCLK BST_A 220n/50V C327
I2S-OUT_SDO R492 0R 22 470n/50V
Power Off Mute 0: Normal 2 I2S-OUT_SDO
3.3VA R450 22R 24
SDIN
BST_B
C410
43 33n/50V
L64 C357 C450 NC/470n/50V
1: Shutdown M-SCL
R457 22R 23 SCL TAS5707 46 470n/50V 220n/50V AMP-Rout-
M-SDA SDA OUT_B
MUTE_5727 19
PDN_18 R440
8 15.0 uH NC/4.7R C451 NC/1n/50V
NC 5 C408 1u/16V
R423 C320 4.7n/50V 11 GVDD_OUT_31
18k R410 470R C452 47n/16V PLL_FLTP 32 C446 1u/16V
12 GVDD_OUT R436 NC/4.7R C442 NC/1n/50V
VR_ANA L65
R430 C330 4.7n/50V 10 39 AMP-Lout-
C466 PLL_FLTM OUT_C
15k R411 470R C444 47n/16V C505
10n/50V R421 C507 C460
3.3VA 200R R247 18k 16 42 33n/50V 15.0 uH
OSC_RES BST_C 470n/50V 220n/50V C509
C441
C455 4.7u/10V 18 33 33n/50V NC/470n/50V
R451 C338 100n/16V VR_DIG BST_D L67 C438 C506
C481 2.2n/50V/NC6 36 470n/50V 220n/50V AMP-Lout+
POP_MUTE_DRV632 L71 BLM18PG181SN1 3.3VA 3.3VA 15k/NC SSTIMER OUT_D
R412 22k 7
OC_ADJ R473 NC/4.7R
PGND_CD_5
3.3VA 31 15.0 uH C440 NC/1n/50V
PGND_AB_2
3.3VA VREG
R458 NC/10k
PGND_CD
14
PGND_AB
R424 FAULT_13
R526
DVSSO
R680 15k/NC
STEST
AGND
R406 RST_AMP R469 100R
DVSS
EPAD
AVSS
4.7k 25 C458
GND
C 4.7k RST_AMP RESET_24 C
R528 MUTE_632 10k
MUTE_632 7 MUTE_5727 C315 100n/16V
4.7k
3
1u/10V
3
VD24 R678
47
48
37
38
17
9
28
30
29
26
49
2 MUTE_DRV632
R529 1 2 1 V24 MUTE-AMP R400 4.7k 1 V34 N80 I2C ADDR:
R679
0R
R681
10k MMBT3904LT1
MMBT3904LT1 0x54
2
1N4148W 10k/NC
2
C483 47k
100n/16V
WOOFER AMP
5
VCC-AA
64
:5
C384 L47 3.3VA
MB
3.3VA
1u/50V BLM21PG220SN1D
L92 L93
C516
220u/25V BLM18PG181SN1 BLM18PG181SN1
C347 10u/16V C359 10u/16V
C391 1u/50V
C328 1u/50V C388 100n/16V C321 100n/16V
C337 1u/50V C325 1u/50V
N14
C601 R601 10k 1 10 R604 10k C607
2 EARPHONE_OUTR -INR -INL EARPHONE_OUTL 2
44
45
40
41
34
35
13
27
1u/10V 1u/10V
2
3
R602 68k 2 9 R605 N81
B OUTR OUTL B
AVDD
DVDD
PVDD_A1
PVDD_A2
PVDD_B1
PVDD_B2
PVDD_C1
PVDD_C2
PVDD_D1
PVDD_D2
68k R322 10k R456 NC/4.7R C344 NC/1n/50V
3 8 R606 47R PH_L
PH_R R603 47R EN GND L68
4 7 R499 0R 15 1 Woofer+
PVSS PVDD 3.3VA 2 I2S-OUT_MCKO MCLK OUT_A
3.3VA 2 I2S-OUT_BCKO R500 0R 21 C362 C387
SCLK C377
5 6 2 I2S-OUT_WSO R501 0R 20 4 33n/50V 15.0 uH C380
CN CP C606 LRCLK BST_A 470n/50V 220n/50V
2 I2S-OUT_SDO R503 0R 22 C370
R608 SDIN 43 NC/470n/50V
C604 1u/10V TAS5711 33n/50V C390
4.7k 3.3VA BST_B L49 C379
1u/10V AS9604 2 M-SCL R470 22R 24
SCL 470n/50V 220n/50V
C605 2 M-SDA R461 22R 23 46 Woofer-
MUTE_5727 19 SDA OUT_B
1u/10V PDN R460
3
12 GVDD_OUT2
VR_ANA
C361 4.7n/50V 10 39
R319 C385 R453 PLL_FLTM OUT_C
470R C374 47n/16V
15k 10n/50V R323 200R R347 18k 16 42
OSC_RES BST_C
PGND_CD1
PGND_CD2
PGND_AB1
PGND_AB2
15k/NC R459 14 VREG
AMP-Lout+ 1 NC/10k
A_SEL
DVSSO
AMP-Lout- 2
STEST
AGND
DVSS
EPAD
AVSS
R351 RST_AMP R454 100R 25 C346
GND
AMP-Rout- 3 RESET_24
AMP-Rout+ 4 15k C345 100n/16V
1u/10V
47
48
37
38
17
9
28
30
29
26
49
5
6
耳机输出 5VAIN
XP22
N81 I2C ADDR:
0x56
AMP-Lout+ 1
A XS8 AMP-Lout- 2 A
R455 5 GND AMP-Rout- 3
47k PH_L 1 L AMP-Rout+ 4
2 WL Woofer- 5
HP_DEC R446 1k 4
HP_DEC
WR Woofer+ 6
PH_R 3 R
R556
C339 C227 100k
7
8
CKX-3.5-111\REFLOW
10u/10V 100n/16V R393 R449 Hisense Electric Co.,Ltd.
470R 470R No.11,Jiangxi Road,Qingdao,China
WWW.HISENSE.COM
XP22和XP24做一个兼容放置 Title
Hisense MSD6308RT
5 4 3 2 1
5 4 3 2 1
D D
5
L73 11 G
64
12 G+_11
BLM18PG121SN1 G-_12
:5
C105
L74 RJ45-RJR-008103-HX
1n/2000V
MB
C109 C106 C107
BLM18PG121SN1
10n/50V100n/16V 100n/16V L75
LAN_LED0 R100
B BLM18PG121SN1 B
470R R102
L76
R104 0R
BLM18PG121SN1/NC LAN_LED1
L77 470R R103
BLM18PG121SN1/NC 0R
A A
5
NC_22 NC_27 NAND_RBZ 2
64
23 26 RP312 22R
NC_23 NC_26
:5
24 25
NC_24 NC_25 C437 需靠近主IC
MB
C434
C433 33p/50V/NC
100n/16V MT29F1G08ABADA
100n/16V
NAND_D[7:0] 2
NAND-D0 RP313 1 8 22R NAND_D0
B NAND-D1 2 7 NAND_D1 B
NAND-D2 3 6 NAND_D2
NAND-D3 4 5 NAND_D3
NAND-D4 RP314 1 8 22R NAND_D4
NAND-D5 2 7 NAND_D5
NAND-D6 3 6 NAND_D6
NAND-D7 4 5 NAND_D7
I2C Address:
D Write:C0 D
U6 U7
11
12
13
14
12
13
14
15
Read:C1
GND1
GND2
GND3
GND4
GND1
GND2
GND3
GND4
10 T_IF-AGC 11 T_SDA
IF_AGC SDA
9 IF-IN+ 10 T_SCL
IF_P SCL
8 IF-IN- 9
IF_N NC4
7 8
Clock Out NC3
6 7 IF-IN+
GND IF+
5 T_SDA 6 IF-IN-
SDA IF-
4 T_SCL 5 T_IF-AGC
SCL IF AGC
3 3.3V_Tuner 4
+B1(3.3V) NC2
3 3.3V_Tuner
B1_3.3V
2 TUNER-SW 2 TUNER-SW
RF_SW RF_SW
1 1
ANT(5V) NC1
CDT-9051324-10_ZLT/NC SHARP-VA4N1BC1201
C C
Tuner Connector
使用FK1602或VA1P1BF8402时,C364、C367、C359和L32NC掉, 3.3V_Tuner
C357=0R,C365=0R,R313=0R,R314=0R,R312=0R,R315=0R
5
TUNER_SDA 2
L37 T_SCL R113 100R
64
C336 0.015 uH/NC TUNER_SCL 2
BPF_IN C359 180p/50V/NC
:5
C1 L32 Q值:15(MIN) C807
C1114 C808
MB
IF-IN+ C809 R427 33R BPF_OUT+ VIFP
DIFP 2 100n/16V 20p/50V 20p/50V
100n/16V
R314 C335
C365 C2 56p/50V/NC
C367
B B
N20 Max460mA
V11 LD1117A-3.3AZ1117H-3.3
3.3V_Tuner AO3401L/NC 5VAIN
L70
3
VIN VOUT
4
3.3V_Tuner Close to tuner
BLM18PG330SN1D
2
2 3 TUNER-SW VOUT
ADJ
R254 10k/NC
R226 100R
3
R233 1
22k/NC V36
TUNER_SW
MMBT3904LT1/NC
R241
2
22k/NC
A A