Documente Academic
Documente Profesional
Documente Cultură
Use
the eyebolts (1.5) and the safety ropes.
After installation of the panels, remove the eyebolts used for
lifting.
WARNING
• Only use rollers on a level floor.
• Move the switchgear section avoiding any
possible tilting.
Sliding rollers
Metal sheet
4.6.2 Apparatus
4.6.1.3 Handling by transpallet or fork lift trucks The apparatus can be handled by cranes, fork lift
trucks or using the truck provided by ABB.
WARNING For each piece of apparatus follow the instructions
• Only use transpallets or fork lift trucks on a below.
level floor.
• Move the switchgear section avoiding any WARNING
tilting. • While handling do not put any stress on
the insulating parts and on the apparatus
terminals.
To guarantee stability, the switchgear must not be lifted too
high. Check the alignment of the forks. • Before handling the apparatus, make sure
that the operating mechanism springs are
discharged and that the apparatus is in the
open position.
26