Documente Academic
Documente Profesional
Documente Cultură
2x
Baseband
made better
World’s b e s t
2x
Baseband
made better
• Baseband product capability introduction
• Baseband Function
• Baseband Interfaces
› WCDMA HW prepared
– 576 CE Downlink & 576 CE Uplink
– 960 CE EUL Uplink*
– 384 HSDPA & 384 EUL users
– 252 Mbps Downlink & 92 Mbps Uplink
– Up to 12 cell carriers / 180 HSDPA codes
› Single BB pool, perfect pooling of CE
› WCDMA + GSM
– 576 CE Downlink & 576 CE Uplink
– 960 CE EUL Uplink
– 384 HSDPA & 384 EUL users
– 252 Mbps Downlink & 92 Mbps Uplink
– Up to 12 cell carriers / 180 HSDPA
codes
› Single BB pool, perfect pooling of CE
2x
Baseband
made better
Category Item Format Comment
Netconf RbsSummary File Netconf (xml)
(XML) SiteBasic Template Netconf (xml)
Script
SiteEquipment Template Netconf (xml)
TN Template Netconf (xml)
RN Template Netconf (xml)
MOS Feature Activation Script Moshell (.mos)
Script Post Integration Script Moshell (.mos)
Cell Relation Script Moshell (.mos)
UP Upgrade Package (UP) ZIP
LKF License Key File (LKF) XML
PC Client PC
Cable Ethernet Cable Baseband LMT - PC
• Baseband5216 should be installed in RBS6601 and should be power on.
- IP Address : 169.254.2.1
- Username : rbs
- Password : rbs
<summary:AutoIntegrationRbsSummaryFile
xmlns:summary=http://www.ericsson.se/RbsSummar
xmlns:summary=http://www.ericsson.se/RbsSummaryFileSchema
yFileSchema
xmlns:xsi=http://www.w3.or
xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance
g/2001/XMLSchema-instance
xsi:schemaLocation="http://www.ericsson.se/RbsSummaryFileSchemaSummaryFile.xsd">
<Format revision="F"/>
<ConfigurationFiles
Same with XML script
In SFTP server
siteBasicFilePath="1_eNB11_SiteBasic.xml“
siteBasicFilePath="1_eNB11_SiteBasic.xml“
siteEquipmentFilePath="2_eNB11_SiteE
siteEquipmentFilePath="2_eNB11_SiteEquipment_RBS6601
quipment_RBS6601.xml"
.xml"
Same with License
In SFTP server
licensingKeyFilePath="SKT_DVT_eNB11
licensingKeyFilePath="SKT_DVT_eNB11_BD2_BB5216_15091
_BD2_BB5216_150910_061816.
0_061816.xml“
xml“
upgradePackageFilePath="CXP9024418_2-R1YV.zip“
upgradePackageFilePath="CXP9024418_2-R1YV.zip“
initialSecurityConfigurationFilePath="%ForIPsec_path,
initialSecurityConfigurationFilePath="%ForIPsec_path, not supported
s upported yet%"/>
</summary:AutoIntegrationRbsSummaryFile> Same with UPG in SFPT
• Sometimes UP PKG is zipped twice, in case this UP should unzip once and save
in SFTP HOME folder. Otherwise auto integration will stop.
• Note that in this case, UP file name might be different from what in
“RBSSummary.xml” should change it according to “RBSSummary.xml”
• Auto-Integration
Auto-Integr ation Tool
Tool Page
- Tool Web
Web Page
Page : https://169.254.2.2
• Host : 169.254.2.1
• Username : rbs
• Password : rbs
• Site Installation File :
/<File_Name>
• Put in integration information for SFTP server and Site Installation file
SW Package Download
success (Finished)
Prepare Filesystem
success (Finished)
CLICK
• After press “Integrate” button Node will Restart and start integrate
Configuration File
• In case error happens during integration, integration should be
stopped and board will restore to factory setting.
• If integration finishes with no error no progress message in Auto-
Integration Log
• Wait until TN port LED is ON and access node with moshell to run
scripts.
.
Type rbs/rbs
• Open an Terminal and run following TN/RN script running commands
• File path should be put in correctly.
ssh -o PubKeyAuthentication=no -o UserKnownHostsFile=/dev/null -o ForwardX11=no -p 830
rbs@169.254.2.2 –s <TN XML Script File Name>
ssh -o PubKeyAuthentication=no -o UserKnownHostsFile=/dev/null -o ForwardX11=no -p 830
rbs@169.254.2.2 –s <RN XML Script File Name>
• Command Example
ssh -o PubKeyAuthentication=no -o UserKnownHostsFile=/dev/null -o ForwardX11=no -p 830
rbs@169.254.2.2 -s netconf < 3_eNB12_TN_netconfv2.xml
ssh -o PubKeyAuthentication=no -o UserKnownHostsFile=/dev/null -o ForwardX11=no -p 830
rbs@169.254.2.2 -s netconf < 4_eNB12_RBS6601_RN_netconfv2.xml
• After script running, “lt all” to load new configuration and save CV
cvmk <cv_name>
or
cvmk <cv_name> or acc BrM=1,BrmBackupManager=1
acc BrM=1,BrmBackupManager=1 createBackup createBackup
• After save CV, Node Cold Restart
acc FieldReplaceableUnit=1 restartUnit
2x
Baseband
made better
› Ethernet cable (Pin Assignment: Straight)
› at least Java Runtime Environment (JRE) 6. You may therefore need to install
the latest update of the JRE. You can download one from Oracle's Java web
site.
› SFTP
› Summary file for restore and exported backup for affected Baseband
› Turn off all security accounts , security centers and Firewall on your PC
› Cygwin Installation:
› Unzip "cygwinBin4Emcli.zip"
› Execute the setup-X86.exe file (32-bit installation).
› Choose "Install from Local Directory", then click Next.
› Root Directory "C:/cygwin" (It is not allowed to choose a different directory, especially if
it contains spaces). If prompted for "Default Text File Type", choose UNIX (not DOS).
Then click Next.
› Select Local Package Directory: "cygwin_emcli_x.x.x" (x.x.x: cygwin version). Then
click Next.
› Select Packages: Add the following packages: - under "Archive", select "zip" and
"unzip"
- under "Net", select "inetutils", "openssh", "openssl"
- under "Perl", select "perl" and "perl-XML-Simple"
- under "Libs", select "liblzma5", "libglib2.0_0" and "libuuid1"
- under "Tcl", select "expect"
- under "Shells", select "rxvt VT102"
› Click Next and installation of Cygwin will start. Wait for the installation to complete.
› Open a Cygwin terminal window by double-clicking on the Cygwin icon in the start
menu or on the file c:/cygwin/cygwin.bat. The window should be black with white text
and the prompt should like this: [~]$ If not, then go through all the steps again and
make sure you haven't missed out anything. The Cygwin terminal window can then be
closed.
› EMCLI Installation:
Password :
rbs
› Scenario1
› HW issue and BB replacement is a must
› Node connected to OSS and accessible by AMOS , Backup exported
remotely
› Backup to be sent to Field engineer onsite
› Field engineer to load exported backup (using Web interface to BB5216 ,
backup file , restoreSummaryFile , SW package)
› Scenario2
› Lost remote connection to BB5216 but local access is guaranteed
› Field engineer to export backup from BB5216 via EMCLI
› Field engineer to load exported backup (using Web interface to
BB5216 , backup file , restoreSummaryFile , SW package)
• › Connect Ethernet cable between LMT port in BB5216 and PC LAN cable
• › Set PC IP setting as below
• › IP: 169.254.2.3
• › Subnetmask: 255.255.0.0
• › Gateway: 169.254.2.2
• › Open EMCLI , insert IP address and click on EMCLI button
› Once EMCLI connect to baseband , enter command lt all and enter username: rbs and
password rbs
› Use command cvls to get last created backup with it’s number (BrmBackup=7 in below
example) , so you should extract this backup
› Make export action as shown below using password : rbs
› Backup will be extracted to path C:/BB which configured on SFTP
› path C:/BB should have below
› RBSSummaryRestoreFile.xml
› Baseband SW package ( ex: Baseband_SW_Upgrade_Package_16B_R13FT.zip)
- Note: you must use the same SW level on the old BB to be compatible with
exported backup)
› Exported backup ( ex :
Final_backup_for_Baseband_CXP9024418_4_R13FT_20160904T152437+0000
_RBS0695_RadioNode_20160921T212820+0000.zip)
› Press Download and after receiving message Download completed press integrate ad
wait 10 minutes then try logging using EMCLI and ea access webpage
1
2 4
3
• Open internet explorer and use Url : https://169.254.2.2/ea.html
• Check that node status is Working
• Open EMCLI and use cvls to check that backup restored
World’s b e s t
2x
Baseband
made better
Current High Capacity “384+ HS Users” (M1) High Capacity upgrade (M2)
L1800
L2100
introduction /
introduction
4th sector
CPRI MUX
DUW DUG900
DUW DUG900 5216 DUW DUG900 5216 (LTE) (UMTS (GSM Only)
(LTE) (UMTS Only) (GSM Only) Only)
(UMTS Only) (GSM Only)
42 C3
Current Medium Capacity (M3) Medium Capacity upgrade (M4)
L1800
L2100
introduction +
introduction
4th sector
CPRI MUX
DUG1800
(GSM Only)
Notes: Notes:
1. This model will be used in LTE phase2 1. 4th sector sites, CPRI Mux is required
2. 4th sector ready
3. Configuration Complexity (cons)
4. W17A, OSS16B are needed
43 C3
44
World’s b e s t
2x
Baseband
made better
System Functions Description
BrM: Backup and restoreMgmt -Create, delete and restore backups on a ManagedElement.
-Export + import of backups in file format to/from a remote location
FM: Fault Mgmt -Fetch the set of alarm types supported by a ManagedElement
-Fetch the list of active alarms which are present on the ManagedElement at a given
point in time
HwInventory: Hardware Inventory Mgmt -Check which hardware items are present on a ManagedElement
PM: Performance Mgmt -Determine the PM capabilities of the ManagedElement, for example
Supported job types: Measurement Job (periodic collection), real time jobs or
threshold monitoring jobs
System limits: max number of jobs or files or measurements
-Determine the set of counters (instances of PmGroup + MeasurementType) supported
by the ManagedElement
-Configuration of PM jobs on the ManagedElement
SwInventory: Software Inventory Mgmt -Check which software items are loaded on a ManagedElement and which of those
items are active
2x
Baseband
made better
55
World’s b e s t
2x
Baseband
made better
6. Add Node in OSS-RC
eNB Name
eNB12
MSRBS_V2
True
NEXT
6. Add Node in OSS-RC (4)
• “Topology1”
LTE
According to Site
MSRBS_V2
L16A
ENodeB
Next
6. Add Node in OSS-RC (5)
• “Topology2”
ONRM
Next
6. Add Node in OSS-RC (6)
• “Connectivity 1”
IP Address
FTP SW Store
ON
Next
6. Add Node in OSS-RC (7)
• “Connectivity 2”
Fills in automatically
Next
6. Add Node in OSS-RC (8)
• “Protocols (Protocol-0)”
2022
Next
6. Add Node in OSS-RC (10)
• “Protocols (Protocol-2)”
– Add Protocol-2 SNMP
161
v2c
public
Next
6. Add Node in OSS-RC (11)
• “Protocols (Protocol-3)”
– Add Protocol-3 SSH
2023
Next
6. Add Node in OSS-RC (11)
• “Security”
User name
/Password
Next
6. Check Node Synch
• Synchronize Node
– Select Node Right Button
Synchronize Node
– Check Node is Synchronized