Documente Academic
Documente Profesional
Documente Cultură
ECE2002
ANALOG ELECTRONIC CIRCUITS
FALL SEMESTER 2019-2020
Submitted by:
CH HEMANTH 18BEC0072
Submitted to:
Prof K SAFFRINE
INTRODUCTION:
In this way we can detect our device where ever it is in the range of it.
Components required:
1 Breadboard
2 CA3140 IC
3 9v battery
4 battery clip
5 BC547 transistor
6 2.2M resistors (x2)
7 100K resistor
8 1k resistor
9 100uf (60v) capacitor
10 0.22uF Capacitor
11 47pF capacitor
12 LED
WORKING PRINCIPLE:
When there is any call then capacitors detect the data transmission
frequencies or RF signal and output of opamp goes high or low
(fluctuating) due to generated current at the input side of op-amp. Due
to these fluctuations, LED turns on and off through NPN transistor
according to the signal’s frequency.
The unit will give the warning indication if someone uses Mobile phone
within a radius of 1.5 meters.