Documente Academic
Documente Profesional
Documente Cultură
Page 1 of 3
Cerrar SIS
Pantalla anterior
Desarmado y Armado
IT38G Integrated Toolcarrier and 938G Wheel Loader Power Train
Número de medio -SENR6787-07 Fecha de publicación -01/08/2007 Fecha de actualización -06/08/2007
i01380451
Separation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
B 1U-5750 Engine Stand () 1
C 138-7573 Link Bracket () 3
Start By:
A. Separate the transmission and the torque converter from the engine. Refer to Disassembly
and Assembly, "Engine and Torque Converter, Transmission - Separate".
NOTICE
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 18/05/2016
938G WHEEL LOADER 8RS00611-UP (MACHINE) POWERED BY 3126 ENGIN... Page 2 of 3
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for
installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this
helps to keep contaminants from entering the system.
2. Drain the transmission fluid into a suitable container. The capacity of the transmission is 30
L (8 US gal).
Illustration 1 g00741758
Illustration 2 g00741776
3. Install Tooling (A), chains, and a suitable lifting device to transmission (1), as shown. The
weight of the transmission is 700 kg (1545 lb).
4. Move the transmission to a clean safe work area. Install the transmission onto Tooling (B),
as shown.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 18/05/2016
938G WHEEL LOADER 8RS00611-UP (MACHINE) POWERED BY 3126 ENGIN... Page 3 of 3
Illustration 3 g00741783
5. Install Tooling (C), chains, and a suitable lifting device to transmission cover (2), as shown.
Illustration 4 g00741789
7. Carefully lift the transmission cover up far enough to clear input shaft (4). The weight of the
transmission cover is 200 kg (441 lb).
Copyright 1993 - 2016 Caterpillar Inc. Wed May 18 15:50:02 EST 2016
Todos los derechos reservados.
Red privada para licenciados del SIS.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 18/05/2016