Documente Academic
Documente Profesional
Documente Cultură
Properties
High impact resistance and mechanical resistance
Eurodekor Thin Chipboard
Design versatility with coordinated surface textures
Optimal surface properties according to EN 14322 The EGGER Eurodekor thin chipboard is a light board with low bark content and a
Ideal processing characteristics particularly smooth chip structure. It corresponds to the requirements of the RAL Quality
Processing with low tool-wear Assurance Association for interior doors and fulfils the special requirements for impact
High impact resistance and mechanical resistance resistance and mechanical resistance.
Product properties Eurodekor Thin MDF HD 3 mm
Melamine-faced thin chipboard, laminated on one side, low-emission – E1 P2
Decors: EGGER wood and material reproductions, uni and white decors upon request – no pearlescent decors
Formats: 5,610 × 2,070 mm – only thin chipboard Cuts according to customer specifications
4,300 × 2,070 mm – only thin chipboard H1372 ST22 H3303 ST22 H3090 ST22
2,800 × 2,070 mm
Natural Aragon Oak Natural Arlington Oak Driftwood
Minimum quantity per decor / ≥ 50 full boards – 5,610 × 2,070 mm – only thin chipboard Cut-to-size:
texture / thickness: ≥ 50 full boards – 4,300 × 2,070 mm – only thin chipboard ≥ 1000 pieces per order
≥ 100 half-formats – 2,800 × 2,070 mm
of which:
Variation in number of pieces ± 15 % reserved ≥ 200 pieces per format/texture/thickness
Packaging unit: 25 pieces – 5,610 × 2,070 × 3 mm – only thin chipboard Door formats cut-to-size:
50 pieces – 4,300 × 2,070 × 3 mm – only thin chipboard 200 pieces – 3 mm
50 pieces – 2,800 × 2,070 × 3 mm 200 pieces – 4 mm – only thin chipboard
20 pieces – 5,610 × 2,070 × 4 mm – only thin chipboard other cuts upon request
40 pieces – 4,300 × 2,070 × 4 mm – only thin chipboard
40 pieces – 2,800 × 2,070 × 4 mm – only thin chipboard
Grading: According to standard, there is a pressed grading (decor According to standard, there is a pressed grading (decor
on decor) according to EN 14323 with permitted defective on decor) according to EN 14323 with permitted defective
fractions: fractions:
Points: ≤ 2 mm₂ / m₂ Points: ≤ 2 mm₂ / m₂
Length defects: ≤ 20 mm / m₂ Length defects: ≤ 20 mm / m₂ H3309 ST28 H1793 ST27
FEELWOOD FEELWOOD
Customer-specific grading and stacking upon request Customer-specific grading and stacking upon request Sand Gladstone Oak Lava Tortona
H1334 ST15 H3386 ST15 H1521 ST15 H1727 ST15 H1582 ST15
Light Ferrara Oak Oak natural Honey Maple Natural Birch Ellmau Beech
H3304 ST9 H3306 ST9 H1199 ST11 H1502 ST15 H3734 ST9 / ST15 H1555 ST15
Grey Lacquered Chateau Oak Anthracite Chateau Oak Black Brown Thermo Oak Alder Natural Dijon Walnut Wenge
www.egger.com/products-interior
FRITZ EGGER GmbH & Co OG. FRITZ EGGER GmbH & Co OG.
Holzwerkstoffe Holzwerkstoffe
Weiberndorf 20 Fabriksweg 11a
6380 St. Johann in Tirol 6300 Wörgl
Austria Austria
t +43 50 600 - 0 t +43 50 600 - 0
f +43 50 600 - 10111 f +43 50 600 - 13039
info-sjo@egger.com info-woe@egger.com
Subject to technical modifications and printing errors.
EN_??????_02/2015