Documente Academic
Documente Profesional
Documente Cultură
A517 GR F
Dimensions
Grade Product Type Thickness Width Length
(Inches) (Inches) (Inches)
Grade F Plate 0.197- 2.50 60- 131.9 73- 590
Mechanical Properties
Tensile Test: Tensile testing is performed in the transverse direction according to ASTM A20 requirements.
Grade Product Type Thickness Yield Strength Tensile Elongation in Area 2) Area 3)
(Inches) (min ksi) Strength 2” 1) (min %) (min %)
(ksi) (min %)
Grade F Plate 0.197- 2.50 100 115- 135 16 35 45
1)
See elongation adjustment in ASTM A20
2)
Reduction in area for 1.5 in. wide rectangular tension specimen
3)
Reduction in area for 0.5 in. round tension specimen
Mechanical Testing
Charpy V-Notch Impact Properties: A trasverse Charpy V-notch lateral expansion of 0.015” [0.38 mm] in individual specimens is required. The
test temperature shall be agreed upon between the manufacturer and purchaser. Please inquire for required Charpy V-notch test temperature
and for other specified minimum impact property requirements.
Contact Information
www.ssab.com/contact
The English version of this document shall prevail in case of discrepancy. Download the latest version of this document at www.ssab.com
For referenced ASTM standards, visit the ASTM website, www.astm.org. The information contained herein is only intended to provide guidance relative to SSAB’s capability to
supply products complying with the requirements of the referenced ASTM standards. The information contained herein is in no way a guarantee or warranty of SSAB product. In
the event of an order, the specifications as stated in the purchase order and any subsequent order acknowledgment establish the basis for any product specifications, require-
ments and/or guarantees.