Documente Academic
Documente Profesional
Documente Cultură
ON AUDIOCODES MP-20X
For Dialog Axiata PLC
CONTENTS
Introduction .................................................................................................................................................. 2
L2TP POC setup ............................................................................................................................................. 2
Configuration details ..................................................................................................................................... 3
For L2TP Tunnel: ....................................................................................................................................... 3
PPP Connection: ........................................................................................................................................ 3
LAN IP Configuration ................................................................................................................................. 3
Setup Guide................................................................................................................................................... 3
Restoring Factory Settings ........................................................................................................................ 3
To cable the MP-20x: ................................................................................................................................ 4
Configure L2TP connection ....................................................................................................................... 4
Note: ........................................................................................................................................................... 10
1
L2TP CONFIGURATION ON AUDIOCODES
MP-20X
INTRODUCTION
The MP-20x series of Analog Telephone Adapters are cost-effective, advanced 2 and 4 ports ATAs, which
enable fast and smooth migration of traditional analog telephones, fax machines and conference
speakerphones to a Voice over Broadband (VoBB) service as well as the benefit from enhanced offering
in the form of multi lines.
Dialog Data
Network
Dialog VPN
User Terminal
AudioCodes MP-20x LTE CPE termination
(Computer)
point
AAA Server
L2TP Connection
Host IP Address: 10.210.8.4
Group Name : LNS_GRP-01
PPP Connection Password : test
User Name : sivatest@dialogill.lk
Password : 22r72
Dialog Data
Network
LTE CPE Dialog VPN
User Terminal
AudioCodes MP-20x termination
(Computer)
point (LSN)
AAA Server
2
CONFIGURATION DETAILS
PPP CONNECTION:
1. Username: sivatest@dialogill.lk
2. Password: 22r72
LAN IP CONFIGURATION
SETUP GUIDE
You can restore MP-20x's factory default settings when, for example, you're building a new network
from the beginning or when you cannot recall changes made to the network and you need to go
back to the default configuration.
1.1.1.In the 'Advanced' screen, click the Restore Factory Settings icon; the 'Restore
Factory Settings' screen is displayed.
3
1.1.2.Click OK to restore MP-20x's factory default settings.
1.3. Connect the MP-20x's Ethernet 10/100 Base-T RJ-45 connector labeled WAN to your cable or
LTE modem (or other network connection).
1.4. Connect the MP-20x's Ethernet 10/100 Base-T RJ-45 connector labeled LAN/PC to a computer.
1.5. Connect the power cable to the electrical outlet using the AC/DC power adapter; the POWER
LED is lit (green) and when initialization completes (~ 1 minute), the STATUS
1.6. LED changes from red to green.
1.7. Set user PC running for dynamic IP addressing (Assign IP from DHCP)
1.8.1.With your PC connected directly to MP-20x, use URL http://192.168.2.1 to access the
1.8.2.Select the language
4
1.8.3.Assign new password for the device
1.9. In the “Advanced” screen select the “System Settings” . Enter the L2TP tunnel group
name in ‘Gateway’s Hostname’ under ‘System’. Example :- <LSN_GRP-01>
1.9.1.Click Apply and OK
5
1.10. Click “Network Connections”
1.10.1. Click “New Connection”
6
1.10.4. Enter PPP connection details as per below
7
1.12. In the “Advanced” screen click the “Reboot” icon and “OK”
1.13.1. Under “Settings” tab change “MTU” to “Manual” and set value to “1400”
8
1.13.3. Under “Routing” tab change “Routing Mode:” to “Route”
1.14.1. Under “Settings” tab change setting in device IP and DHCP sever setting as below.
1.15. Configuration for L2TP is done. Now test the Internet connection.
9
NOTE:
10